Ubuntu :: KDE Dolphin Stop Responding On NFSv4 Share

Apr 4, 2011

I just started to use NFSv4, but Dolphin seems to have problems with it. For example if I copy something from local partition to the nfs partition dolphin stops to response. I cannot launch another dolphin or browse the current dolphin. After copying is completed the dolphin starts to work again. I also have cifs partitions via samba, but with those I don't have this problem. Something wrong with my NFS configuration maybe?

Code:
/export 192.168.0.0/24(rw,fsid=0,no_subtree_check,async,no_root_squash)
/export/alpha 192.168.0.0/24(rw,no_subtree_check,async,nohide,no_root_squash)
/export/beta 192.168.0.0/24(rw,no_subtree_check,async,nohide,no_root_squash)
/export/gamma 192.168.0.0/24(rw,no_subtree_check,async,nohide,no_root_squash)
/export/delta 192.168.0.0/24(rw,no_subtree_check,async,nohide,no_root_squash)

View 1 Replies


ADVERTISEMENT

OpenSUSE :: 11.1 - Dolphin Crashing (Machine Fail Responding)

Sep 15, 2010

I've experienced some problems with Dolphin. It crashed a lot, so hard that I've to reset the machine. I have a Vaio VGN SZ 750. Since OpenSUSE 11.1 it used to fail responding, or when I have to move a lot of files, it starts to slow the machine until I have to turn off or restart. I really don't like it as I like Konqueror, so I'd like to know if I can uninstall Dolphin and use konqueror as default. Can I use the camera, the digital-"reader" and the Nvidia card of my laptop? Any link?

View 5 Replies View Related

Ubuntu :: Programs Randomly And Frequently Stop Responding?

Mar 19, 2011

programs (especially Firefox, though I haven't used other programs much) stop responding rather frequently without warning and after some time they just start responding again. Apt-get also takes ages to unpack stuff when I'm upgrading/installing something, that might be related. According to top there is barely any cpu usage at all during these freezes. I had this issue on a stock Lucid install. When Maverick came out, I tried that one, and the issue still existed. On a fully upgraded Maverick system, it's still there as well. Windows works without a hitch, as does Ubuntu running under a VM on windows.

System specs:

CPU: Phenom 2 x4 945 @ 3 GHz
GPU: Radeon HD 5770 with fglrx
4 GB of ddr3 ram
Motherboard: Asus M4A89GTD PRO
Hard drives: 2 WD 1.5 TB drives running on a fakeraid 1 array

View 2 Replies View Related

Slackware :: Windows Stop Responding To Keyboard (13.1)?

Jun 1, 2010

I upgraded to 13.1 from 13.0 a few days ago. I have a Toshiba Satellite L3655D that I leave on constantly. Twice now, I have woken up to windows (urxvt and firefox) that don't accept keyboard input. I can paste into them and they respond, clicking is fine, but the keyboard either barely sends or is completely ignored - if I tap a bunch of keys, one or two might go through, eventually. New windows work fine, so I have to replace everything I have open.

edit:I switched to XFCE for 2 days and the issue didn't appear, but my other laptop with the same fluxbox settings also did not have any problems. I switched the original laptop back to fluxbox (and happened to upgrade the ATI drivers around the same time) and haven't had it happen since. If this happens to you, try restarting X.

View 7 Replies View Related

Ubuntu Servers :: Stop Responding: Goes Into An Automated Scanning Mode

Jul 14, 2010

I just installed ubuntu as a learning tool. It was going fine until the next day after the install. This happened on two reinstall of ubuntu server 10.4. All was installed was lamp, squid, privoxy, tor, shorewall, and phpmyadmin. I have added 3 websites to the server.

Today, I noticed my internet stopped responding on my other pc which is linked to my server for internet access( privoxy). When I turned on the server, I noticed the screen was purging out random lines. I don't know what they mean, but it was a never ending series of lines filling the whole screen. To stop it, I ctrl+c. Some of these lines read usb, keyboard, mouse, etc. I am guessing the system went hay-wired.

When I reboot the machine, it did it again. This time I don't have the cmd prompt. I didn't know another other way to properly shutdown so I just cold reboot the machine. The next time it booted up, all seems normal like it always have been. My sites, internet is working.

I probably didn't provide enough info to diagnose this behavior. As mentioned before, it happened the first time I installed the server and it is happening again with the same applications installed.

Edited: It happened again. Some of the lines I could make out are these.

Code:
Bug: unable to handle kernal NULL pointer deference
Kernal panic-not syncing: Attempted to kill the idle task!
Error panic occured: Switching back to text console.
The server froze at this point.

View 1 Replies View Related

Ubuntu :: 10.10 Freezes Randomly - Keyboard And Mouse Stop Responding

Feb 4, 2011

I have installed Ubuntu 10.10 on other machines before and have not experienced this problem. Occasionally, the system will lock up. They keyboard and mouse stop responding (my keyboard status lights no longer respond, but my optical mouse light is still on). I can ssh to the machine, and it seems to work as normal. I kill processes that are open on my desktop through ssh, (i.e., Firefox), and I notice when I switch back, I still have the same frozen image on my screen. I have looked at the following files to determine any issues with the GPU:

[Code]...

View 2 Replies View Related

General :: USB Devices Stop Responding When A New Device Is Inserted?

Oct 4, 2010

I'm running archlinux & just recently started having a problem where ALL USB devices will stop responding for a second when a new USB device is plugged in. dmesg doesn't provide any hints.For example, I've got my music on an external HD & it will stop playing for like ~30 seconds if plug in my camera or gamepad...This issue only seemed to start after my home partition was erased & re-created, though I don't see how these two issues could be related.I've been running a custom kernel (2.6.35-rc6) for the past few months, and that hadn't changed to spur this issue. Thinking it may have been something weird with the kernel, I even switched over 2.6.36-rc6-mainline, yet this did not remediate the issue.

View 2 Replies View Related

Ubuntu :: KDE Apps Stop Responding To Mouse/keyboard But Plasma Still Works?

Jul 30, 2011

Hey folks. I'm not sure how to describe this properly but periodically Kubuntu 11.04 will stop responding to my mouse and keyboard EXCEPT that Plasma, or what I assume is Plasma, still responds to mouse events. I can launch and exit the desktop cube and desktop grid but can't access my panels or any application controls. The only fix I've found is to do a hard power cycle.

Does this behavior ring any bells for anyone? This is the last hurdle I've got between me and using Kubuntu 11.04 full time on my Samsung RV515.

View 2 Replies View Related

OpenSUSE :: KDE 4.5 - Mouse Will Stop Moving For About 1-1.5sec And Then Dolphin Will Close

Sep 13, 2010

I run my desktop the old fashioned way, lots of icons on it, I think its what you would call under KDE: Folder view. (right click desktop, settings, appearance, type: Folder view)

1- first thing I noticed was that you now have the + and - signs when you hover or select icons, I understand what they mean to do but to be honest I can do that perfectly well using ctrl + mouse click, so is there a way to not show the + and - sign.

2- with 11.2 and KDE 4.3.5 if I held my mouse over a folder on my desktop I would see its content in a panel. If I for exampled placed an image on the desktop the icon would be a small version of the image. In KDE 4.5 I no longer have these effect. In Desktop settings - Plasma Workspace under Display the Previews is checked and under More Preview Options I selected the whole lot. But nope it not longer will do a preview, am I missing something here ?

3- sometimes, but hard to reproduce, when closing for example Dolphin, it wont close right away, mouse will stop moving for about 1-1.5sec and then Dolphin will close. Not sure where to look for that. I won't mind entering a bug report at KDE but rather not do it if I simply missing something in the configurations.

View 3 Replies View Related

Ubuntu :: The Mouse And The Keyboard Will Stop Responding And The Screen Sometimes Get Divided Into 4 Smaller Quadrants?

Jul 15, 2011

My ubuntu session will freeze and stop working. For example, the mouse and the keyboard will stop responding and the screen sometimes get divided into 4 smaller quadrants of the current screen.The only thing I can do after it freezes is reboot the machine.Would anyone know what is causing this?Also, I keep having to move my optical mouse from the usb slot into a ps/2 slot.And the same thing with my keyboard. I have 2 keyboards, so I can plug in the old ps/2 keyboard instead of the new usb keyboard. (the devices keep flipping)My machine is an AMD 3400 with an Epox mobo. Nothing like this has ever happened before, and I have been using ubuntu for more than 4 years without any problems.

View 9 Replies View Related

Fedora Hardware :: Keyboard / Mouse Stop Responding; Replugging Isn't Registered?

Jan 23, 2011

Today my keyboard and or mouse repeatedly stop responding some minutes after boot. Currently the mouse stops responding after a few seconds of movement immediately after boot. Yesterday I used the machine most of the day, yet this issue didn't arise. Today I used it for a few hours before the issue developed. I did a full system update from the fresh install yesterday night. It's therefore possible that this issue has arisen as a result of the update, and that today the onset was delayed for some reason.

Earlier today I had the same problem with the keyboard. I replaced the batteries thinking that this was the cause. Now it looks like both keyboard and mouse are affected by the same problem. When the mouse stops functioning and the keyboard remains active, I unplug the mouse and replug it in, but it still does not respond, and only the unplug, and not the replug, are detected and logged in dmesg. I noticed ever since I installed Fedora yesterday that plugging in new usb devices after boot did not result in them being recognised, and that if I unplugged a mouse or keyboard and plugged them in again they would not work (requiring a hard reset). Currently the machine isn't usable as I cannot use the mouse for more than a few seconds. I haven't tried a PS2 connection, and currently I have keyboard access.

Hardware:

Fujitsu LZ945230BH1 USB Mouse
Microsoft Arc Bluetooth Wireless USB Keyboard
Running Fedora 14.

I haven't tried PS2. My keyboard and mouse appear to be working again (25 mins and still responsive).I unplugged all USB devices except for the keyboard, mouse, and wifi dongle. This appears to have solved the problem. Other devices that were plugged in were a USB to SATA external HDD caddy (powered off), and a serial USB connection to a Sheeva Plug computer (mini server). how I can use all my USB ports in future without this issue arising?

View 1 Replies View Related

Fedora :: While Working With Firefox / Amsn And VLC Suddenly System Stop Responding

May 25, 2011

I installed F14 and I have been having some issues with the usage of the ram memory. Here is the situation: while working with firefox, amsn, and VLC, suddenly the system stop responding, I just can manage to check system monitor and the ram is at 89% (of 1GB) and the swap at 50% (of 1.4GB). I can do nothing then I just switch off the machine. After that using the same applications everything is fine. I was using F12.

View 3 Replies View Related

Ubuntu Networking :: Machine Will Suddenly Stop Responding To Connections While Still Remaining Partially Connectible?

Jan 2, 2011

I have a strange problem where my machine will suddenly stop responding to connections while still remaining partially connectible. Here's an example sequence of events I have taken (numerous times). If anyone can spot something else I should check or has seen these symptoms before please let me know.1) System is using an Edimax 7318-usg, Ubuntu 10.042) Wifi connection is working, with power management turned off (iwconfig)3) Signal strength does not cause the connection to drop (confirmed with router logs)4) When in a ssh session on the problem machine suddenly the ssh session is dropped "host is down"5) When I attempt to re-initiate ssh it fails, no route to host...6) Pinging it fails, accessing a webpage hosted on it fails, all access fails7) The machine I'm pinging/sshing from still has a good network connection8 ) I check my routers DHCP leases, problem machine still has a valid lease.

9) Router still shows problem machine in routing & arp table & shows active traffic going to and from (I checked the routers states and bandwidth monitor for this)10) I try sshing and pinging the problem machine from the laptop on the local network, it still fails, no route to host, wtf?11) I go to the problem machine physically, wifi connection is up with decent signal12) ifconfig indicates it still holds an IP address13) I open a browser on the problem machine, any webpage loads fine14) I ping the laptop from the problem machine, ok15) I ssh from the problem machine to my laptop, it works16) At this point I ssh from the laptop to the problem machine, sometimes it works sometimes it fails(it seems that pinging/sshing the laptop FROM the problem machine sometimes makes it connectable again).

17) Usually if I wait a while the problem machine will randomly become connectable again at random intervals18 ) The only reliable way to make the problem machine connectable again is manually reconnecting it to the wireless network19) I tailed auth.log ufw.log, etc. nothing suspicious disallowing my ssh connection20) dmesg shows nothing unusual, as far as I can tell, just some activity negotiating WPA keys and suchBy looking at the timestamp for the WPA negotiation and cross referencing the router bandwidth monitor I can tell the WPAnegotiation doesn't make it drop the conectionSo that's it, lol.

View 6 Replies View Related

Slackware :: Dolphin Samba Share Firewall / Saying It Can't Find Any Workgroups On Local Network?

May 12, 2011

I just set up my firewall, and now I can't see any Samba workgroups. It says it can't find any workgroups on my local network, and it may be caused by a firewall. It is a firewall issue because if I disable my firewall, I can see the workgroup. What do I need to open on my firewall to see the workgroup? I am using Slackware64 13.37.

Here is how I set up my firewall.

Code:
iptables -P INPUT DROP
iptables -P FORWARD DROP
iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -s 127.0.0.0/8 -d 127.0.0.0/8 -i lo -j ACCEPT
iptables -A INPUT -p icmp -j ACCEPT
I got the commands from here url.

View 5 Replies View Related

OpenSUSE :: Dolphin Error Message 'The File Or Folder /.local/share/Trash/files/IMGP1676.DNG Does Not Exist'?

Feb 10, 2011

Every time I try to empty the waste bin I get dolphin error - 'The file or folder /.local/share/Trash/files/IMGP1676.DNG does not exist'I tried to recreate the file 'IMGP1676.DNG' , deleted it i.e. sent i to the waste bin and then tried the empty waste bin again, although this time it was there and deleted it still reported the same error.du -h .local/share/Trash/files/ 12K .local/share/Trash/files

View 2 Replies View Related

Server :: Deadlock In NFS4 / Shared Servers Suddenly Stop Responding And Cant List It From Debian 5 Server?

Jan 4, 2010

I am connecting servers using NFS4 the shared directories are on servers running Debian 4 while the one who read from them is Debian 5.0.3. The problem is one of these shared servers suddenly stop responding and you cannot list it from Debian 5 server, also df hang, and the web application that is using it does not respond to requests that use this shared directory since it is blocked. Then the load on the server start to increase until the server cannot respond (over 90). I have found many entries in the syslog that refer to this like:

ma25555 kernel: [1200285.732919] nfs: server 10.xxx.xxx.xxx not responding, still trying
Dec 31 08:16:33 ma25555 kernel: [1200289.815378] INFO: task java:9702 blocked for more than 120 seconds.
Dec 31 08:16:33 ma25555 kernel: [1200289.835249] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
code....

I have tried the connection between the 2 servers using ping for one day and all are OK (zero lost)

There are 3 other servers that are running Debian 4 and are working fine.

View 1 Replies View Related

Ubuntu :: Can't Remove Samba Share / Stop This?

Jan 26, 2010

I just set up a quick share to allow another computer to get some files. I then noticed I was already sharing another folder elsewhere that I had forgotten to stop sharing so I stopped it from sharing.

When I got the files I wanted on my other computer I went to stop the share I had just set up but it appeared to be unshared even though I can see and access it on the network.

Any ideas how to stop this share?

View 7 Replies View Related

Ubuntu Installation :: Stop Hoarding Everything And Share Boot Screen With Windows Xp?

Mar 18, 2010

I installed windows xp on my tobisha satellite l305, then installed ubuntu 9.10..my friend's laptop had vista and was SOOO bogged down from viruses, so he wanted to try ubuntu. We installed ubuntu, leaving the other half of his hard drive unallocated.Afterwards we installed xp, on the unallocated space, but it wouldn't let me dual boot... it would boot directly into xp, however, the ubuntu partition was still there because through the file system in xp we could find it.So then run gparted on a live CD, delete the ubuntu parition, leaving it unallocated, then installed it over that unallocated space.

now, when i dual boot it shows on the grub page the option to boot to ubuntu, ubuntu (recovery) and these two memory test things that when i ran it just shows a BIOS looking screen.testing my memory. However, on the desktop i have mounted 79gb which has all the windows files in it.so how do I tell ubuntu to stop hoarding everything and share the boot screen with windows xp?

View 2 Replies View Related

Ubuntu Servers :: NFSv4 Nogroup Nouser Permissions?

Dec 6, 2010

I've used the NFS how to on the Ubuntu Community wiki here to setup a shared directory between my Ubuntu 10.10 server, and two clients, one running 10.04, another 10.10. I can create and read files from both machines just fine but cannot modify a file created by the other machine.when viewing the permissions on machine A, that was created by machine B, the permissions say "nogroup, nouser". Both users are setup on the server with the same UID, and GID's.Also, both machines are setup to create files that by default are read/write possible for user and group, per the link here.

View 4 Replies View Related

OpenSUSE :: Does Zypper Support NFSv4

Jan 18, 2011

Is it possible to add repositories from NFSv4 to zypper? I have initiated automatic mounting network resources on NFSv4 and it works fine, but after adding repository from NFSv4 to zypper, I have problem on refreshing repository data:

Code:
omega:/distrib/repositories/1 # zypper refresh repo-update-1
Retrieving repository 'repo-update-1' metadata []

[code]....

View 2 Replies View Related

Server :: Using Active Directory As KDC For NFSv4?

Oct 23, 2010

I have AD DS installed on Windows Server 2008 R2. Also, I've got SLES 10.3 as NFSv4 server, which will allow remote users to mount their /home partitions. What I need, is NFSv4 w/Kerberos. As AD server already has integrated Kerberos server, I need SLES to authenticate in it.Everything works good, but when it comes to svcgssd service activation, I receive an error.Here's the log:

/usr/sbin/rpc.svcgssd -f
ERROR: GSS-API: error in gss_acquire_cred(): Miscellaneous failure - No principal in keytab matches desired name

[code]....

View 1 Replies View Related

Server :: NFSv4 And Idmapd Working Only In One Direction?

Jul 25, 2010

I tried to set up NFSv4 with idmapd between two Debian/lenny installations. On the client, the user "xyz" has the UID 501 and on the server "1000". Changing UIDs and setting up NIS is not possible, Kerberos unwanted. I tried to set up NFSv4 with idmapd and it is only working from server to clienthen I list directories on the server, belonging to the user "xyz/1000", the owner is correctly displayed on the client as user "xyz/501". But when I create a file on the server, it is created with UID 501 (should be 1000). The configuration is quite standard, idmapd.conf was generated automatically, NEED_IDMAPD is set to "yes" and starting properly.

The main exporting directory has following options in /etc/exports:
rw,fsid=0,insecure,no_subtree_check,sync
and the mounted directory has:

[code]....

View 1 Replies View Related

CentOS 5 :: Mount Nfsv4 Permission Denied?

Apr 21, 2011

i have a big question about nfsv4, 2 mahine , 1 client 1 serverclient mount -t nfs4 nfs:/ /mnt/nfscd /mnt/nfs/1touch: cannot touch `123': Permission deniedmount -lnfs:/ on /mnt/nfs type nfs4rw,addr=192.168.1.5)this is my configclient & servervi /etc/hosts192.168.1.5 nfs nfs.test.com192.168.1.6 node1 node1.test.com

View 6 Replies View Related

Ubuntu :: Dconf - Inotify - NFSv4 Home Directory Mounts Don't Work In 10.10

Dec 16, 2010

I have noticed that when I have my home directory mounted over network with NFSv4 ==> applications that use dconf to save preferences do not work correctly.

If I try to save preferences they won't save and I'm getting "Unable to contact dconf service" errors with Evince, Empathy etc.

I was googling this issue and I figured out that Dconf uses inotify() ( [url] and [url]) and those notifys don't work with NFS at all so the whole "dconf thing" doesn't work!

Am I right that Ubuntu is moving from GConf to DConf? If that is true I think this issue will be a serious problem if most of the applications use mechanism to save settings that doesn't work with NFS mounted drives. It is quite common to use NFS to mount home directory in some schools, companies and LTSP-machines.

I've tried to reinstall dconf and libdconf0 packages with no working result. When I'm using my home directory locally there is no problems.

And with Ubuntu 10.04/9.10/9.04... there were no these problems.

Links:
[url]
[url]
[url]
[url]

View 2 Replies View Related

Debian Configuration :: Can Disable Client Mount As NFSv4?

Aug 7, 2015

I have Debian 7 running on RPi2 with Kodi. My NFS server is running on Slackware 14.1 which doesn't have full support for nfs4. I think this is causing some slowdowns/extra time when trying to stream video. Debian 7 by default mounts NFS as nfsv4, I would to like to disable this if possible. If so how?

View 1 Replies View Related

OpenSUSE Network :: Cannot Mount NFSv4 Exported Dirctories?

Oct 20, 2010

I am using OpenSuSE 11.3 (64 bit) and am trying to force my new server use NFSv4. Later, GSSAPI, sould be added, but for beginning, I want to configure without it for now. If I try using NFSv3, this works good, but I need NFSv4. I have exported my directory:

Code:
omega:/ # cat /etc/exports
/distrib *(ro,no_root_squash,sync,no_subtree_check)
After mount attempt I have a error:
Code:
omega:/ # exportfs -var

[Code]...

View 4 Replies View Related

Ubuntu Networking :: Nfsv4 - Mount.nfs4: Access Denied By Server While Mounting

Dec 2, 2010

i'm trying to setup a nfs4 server and client. i followed the instructions in [URL](nfsv4 quick start section) and [URL] The SERVER is on 192.168.89.1 running Xubuntu 10.04, and the CLIENT is on 192.168.89.128 running Ubuntu 10.10. Firewall is disabled on both the server and the client for testing purposes. /etc/default/nfs-kernel-server on the SERVER:

Code:

# Number of servers to start up
RPCNFSDCOUNT=8
# Runtime priority of server (see nice(1))

[code]....

On the [URL], i see some steps related to portmap on the "NFS Server" and "NFS Client" sections. Would i need those steps as well? There's also a list of steps on [URL] (linked from [URL]. Are those necessary?

EDIT: Running showmount on the client seemed to show that NOTHING is shared on the server:

Code:

$ showmount -a 192.168.89.1

All mount points on 192.168.89.1:

View 3 Replies View Related

OpenSUSE Network :: Fundamental Difference In Using NFSv4 Instead Of NFS While Mounting Drives?

Jan 19, 2010

Is there are fundamental difference in using NFSv4 instead of NFS while mounting drives?What advantages NFSv4 has versus NFS mounting?

View 1 Replies View Related

OpenSUSE Network :: NFSv4 Oddity On 4 Servers - Directory Export?

Jan 27, 2011

I'm running OpenSuSE 11.3 (64 bit) with the latest kernel update as of yesterday. I've recently moved from NFSv3 to NFSv4 on 4 servers. Between the 4 servers there are 9 exported directories. All of them work except 1 on 1 of the 4 servers.

/etc/exports
# NFSv4 fsid=0 for the top level directory
/export *(rw,fsid=0,async,no_subtree_check,insecure)
# End

# NFSv3
/export/apps/oracle *(rw,async,fsid=7,no_subtree_check,insecure)
/export/ftpserver *(rw,async,fsid=6,no_subtree_check,insecure)
# End

I had to keep the NFSv3 entry as I need that as the mount doesn't work with v4.
/export directory listing
/export:
total 5
drwxr-xr-x 4 root root 104 2002-08-08 16:47 .
drwxr-xr-x 33 root root 944 2011-01-25 17:28 ..
drwxr-xr-x 10 root root 232 2010-01-26 10:01 apps
drwxr-xr-x 8 root root 4096 2010-12-13 12:31 ftpserver

/export/apps:
total 0
drwxr-xr-x 10 root root 232 2010-01-26 10:01 .
drwxr-xr-x 4 root root 104 2002-08-08 16:47 ..
drwx------ 3 root root 72 2008-08-06 16:40 etc
drwxr-xr-x 2 root root 240 2011-01-24 03:00 htdig
drwx------ 3 root root 72 2008-08-06 16:40 lib
drwx------ 2 root root 48 2002-07-02 13:18 lost+found
drwxr-xr-x 4 oracle oinstall 104 2009-01-07 09:59 oracle
drwx------ 5 root root 120 2008-08-06 16:40 usr

Now on any of the 4 servers if I do:
# mount -t nfs4 machinename:/apps/oracle /mnt
mount.nfs4: mounting lister:/apps/oracle failed, reason given by server:
No such file or directory

But the other sub-dir of /export is fine:
# mount -t nfs4 machinename:/apps/ftpserver /mnt

If I mount the pseudo root:
# mount -t nfs4 machinename:/ /mnt
# ls -l /mnt
total 4
drwxr-xr-x 2 root root 48 2002-08-08 15:20 apps
drwxr-xr-x 8 root root 4096 2010-12-13 12:31 ftpserver

But the apps sub-dir is empty
# ls -l /mnt/apps
total 0

On the server:
# ls -l /export/apps
total 0
drwx------ 3 root root 72 2008-08-06 16:40 etc
drwxr-xr-x 2 root root 240 2011-01-24 03:00 htdig
drwx------ 3 root root 72 2008-08-06 16:40 lib
drwx------ 2 root root 48 2002-07-02 13:18 lost+found
drwxr-xr-x 4 oracle oinstall 104 2009-01-07 09:59 oracle
drwx------ 5 root root 120 2008-08-06 16:40 usr

Well that explains why the NFSv4 mount of /apps/oracle fails because for some reason it can't "see" any files below that, but as I say the ftpserver sub-dir & mount are fine.

View 9 Replies View Related

Server :: NFSv4 And Kerberos - Access Denied By Server

Mar 28, 2011

I am attempting to Kerborize an NFS server on a RHEL6 machine, but I cannot get it quite right. The error message I receive when executing the following command (as myself, not as root) is:

Code:

I have a keytab generated from the KDC for both NFS server and NFS client (both RHEL6 hosts) placed in /etc, and I have configured PAM/Kerberos so I can login via SSH and see I have a valid ticket with klist.

I can login to both NFS server and NFS client via SSH and get a ticket, but I don't know where the problematic NFS permissions reside.

The /etc/exports file on the NFS server looks like:

Code:

I have disabled IP Tables on both client and server, and hosts.allow and hosts.deny are not blocking traffic at the moment. On the NFS server.

Here is the output of rpcinfo:

On the NFS client, here is the output of that same command:

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved