Ubuntu :: Installing Windows XP - NTSRP Missing
Mar 26, 2010
I have run into another situation where I need windows to run a program, The software that I am trying to use is Taxact. I have used this software for many years "BUT" I guess it just doesn't like my ubuntu 9.04. I have a 500gb hard drive installed that is empty and I thought I could just load the windows program onto that drive but I am getting a message NTSRP missing? I think thats what it said. What do I need to do to load this program onto this hard drive?
View 4 Replies
ADVERTISEMENT
Jun 30, 2010
So I have a single hard drive with two partitions, and I am trying to install a dual boot of Windows XP and Ubuntu. However, I am having an issue installing the Windows XP component.
I keep getting an error along the lines of a missing/corrupt hal.dll after the first restart in the install. This has happened every time I tried to install windows XP, from several different discs, all of which I have confirmed to work on another computer.
I have tried several things for fixing this, from repairing the MBR and boot.ini to replacing hal.dll from hal.dl_, and nothing works. However, Ubuntu 10.04 installs and boots properly.
What I can do to get Windows to install properly?
View 9 Replies
View Related
Oct 24, 2010
Installing from sources was always complicated to me, but biggest problem is installing when some strange dependencies are "missing". Let's do it on example - I am sure it will benefit lots of users.I have a unmodified ubuntu 9.10 (Karmic) on 64 bir architecture. I download latest Grisbi sources from official web page.I didn't modify any paths to system variables...and it's usually problem with glib or gtk with all other sources I try to install.
1) Could someone help me in this particular case with missing dependencies please?
2) What every User should do when trying to install from source and some libraries are missing?How to find them? How to install them ?
View 4 Replies
View Related
May 29, 2010
I got wine installed,.. about 1/4 in to the installation it says 'file missing' or something
View 3 Replies
View Related
Oct 16, 2010
I backed everything up and did a complete re-install of the system to 10.10. I had a widget layer with compiz before I did this and now it is not even an option in the preferences. Am I missing something?
I was running 10.10 before as well and it was there.
View 1 Replies
View Related
Feb 25, 2011
Ive been trying to install gparted (from source) but configure fails with the error
Code:
Which is odd because it looks like libuuid is installed, i think its installed as part of e2fsprogs which is installed (according to synaptic). Does anyone know how i might resolve this? or is it safe to compile anyway?
As a side question, i was going to install with synaptic, but the version of gparted there was 0.6.2 while the version on the website was 0.8.0. i tried apt-get update and apt-get upgrade but the package manager version was always 0.6.2. is it usual for the package manager version to be out of step like this, or is there something else i could have done to update it?
View 2 Replies
View Related
May 14, 2010
When I write the command "sudo apt-get install dialog". I get this:
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package dialog is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package dialog has no installation candidate
View 1 Replies
View Related
Feb 18, 2010
I tried to install globalmenu today, but gave up after. I am not sure if I removed the application accordingly, but the menubar for some applications is missing (attached pic of a terminal window without menubar).
View 9 Replies
View Related
Apr 11, 2010
I just installed Adobe Flash on my Ubuntu OS, and the audio disappeared. I hit an error on installing the adobe Flash, the first attempt I have, I mistakenly downloaded and installed the version for 8.x, and hit an error on installation. After that I installed the version for 9.x and video runs, but audio is missing.
View 1 Replies
View Related
Jun 8, 2010
I am running Lucid 64bit on my laptop and been trying to install a canon printer driver LBP3200 on it. There are some comprehensive tutorials that I have been following and they worked on my desktop. However the last thing I have to do is
Code:
sudo update-rc.d ccpd defaults 50
which gives me the error
Code:
update-rc.d: warning: /etc/init.d/ccpd missing LSB information
update-rc.d: see [URL]
System start/stop links for /etc/init.d/ccpd already exist.
I checked in /etc and I do not have the rc.d dir! I have rc0.d through to rc6.d and rcS.d dir, but no rc.d one. Is this normal? and if so how can I get the correct file to start/stop the ccpd daemon for the printer? At the moment the print command brings up the printer icon for about ten seconds and then it disappears and nothing happens.
View 2 Replies
View Related
Feb 3, 2011
I am keen to start using Ubuntu and have installed it on one of 4 partitions on my new 1 TB external HD. I got to the reboot stage where I was expecting a new boot screen where I could decide to use either XP or Ubuntu. But there is no mention of Ubuntu just XP and the volume I installed Ubuntu on has disappeared. I can find the other 3 volumes on My Computer.
View 3 Replies
View Related
Feb 22, 2009
When I am installing it always happen
7:kdegraphics-4.0.3-3.fc9.i386 from fedora has depsolving problems
--> Missing Dependency: kdegraphics-libs = 7:4.0.3-3.fc9 is needed by package 7:kdegraphics-4.0.3-3.fc9.i386 (fedora)
7:kdenetwork-4.0.3-6.fc9.i386 from fedora has depsolving problems
--> Missing Dependency: libkopete_oscar.so.4.0.0 is needed by package 7:kdenetwork-4.0.3-6.fc9.i386 (fedora)
digikam-0.9.3-2.fc9.i386 from fedora has depsolving problems
--> Missing Dependency: libkdcraw.so.2 is needed by package digikam-0.9.3-2.fc9.i386 (fedora)
7:kdegraphics-4.0.3-3.fc9.i386 from fedora has depsolving problems
--> Missing Dependency: libkolourpaint4_lgpl.so.4 is needed by package 7:kdegraphics-4.0.3-3.fc9.i386 (fedora)
kdeedu-4.0.3-3.fc9.i386 from fedora has depsolving problems
--> Missing Dependency: libopenbabel.so.2 is needed by package kdeedu-4.0.3-3.fc9.i386 (fedora) .....
View 3 Replies
View Related
May 30, 2010
When I try to install opensuse 11.2 from my usb hdd it says Bootmgr is missing.I installed other distros before without any problem. Now I have windows7 installed on my pc.
View 5 Replies
View Related
Dec 12, 2010
I tried
yum install kchmviewer-5.2-1.i586.rpm
then I got:
Loaded plugins: rhnplugin, security
This system is not registered with RHN.
RHN support will be disabled.
Setting up Install Process
Parsing package install arguments
Examining kchmviewer-5.2-1.i586.rpm: kchmviewer-5.2-1.i586
code....
View 3 Replies
View Related
Mar 11, 2010
installing ubuntu onto a windows system without erasing windows. I know there is wubi, but I ask you whether also with the ubuntu live cd I am able to install ubuntu, into a separate partition, without erasing windows.
View 4 Replies
View Related
Feb 1, 2010
When trying to get wine I do got this error.
Missing Dependency: kernel >= 2.6.29.1-52.fc11 is needed by package libdrm-2.4.11-2.fc11.i586 (updates)
As I understand I must update my kernel before I can move on. How do I do that? I would want a RPM package if that's available.
View 3 Replies
View Related
Oct 31, 2010
I recently switched from Windows to Linux (using Fedora 13 at the moment). I managed to get most things working, but there is one last thing that I'd love to get working: amBX (more info: here). After some searching I found a few guides on how to install it (like this guide: link) I know that one is for Ubuntu, but I can't find any for Fedora, so I used that one as a general guideline. This guide (and the others that I found) require installing Boblight (website here). Compiling Boblight requires several dependencies, but I can only get two of the required dependencies. I used the following code to install the dependencies:
Code:
sudo yum install gcc libusb-dev ruby ruby-dev libportaudio-dev libavdevice-dev libswscale-dev libavformat-dev libavcodec-dev libxrender-dev libsdl1.2-dev libc6-dev-i386 libx11-dev
This returned the following:
Code:
Loaded plugins: presto, refresh-packagekit
code....
View 14 Replies
View Related
May 6, 2010
I want to install mysql50-server and when I write make install clean. I receive this error:
Makefile:34: *** missing separator. Stop.
Here is the code :
# New ports collection makefile for:MySQL-server
# Date created:Fri Apr 11 10:06:26 CET 2003
# Whom:Alex Dupre <sysadmin@alexdupre.com>
#
# $FreeBSD: ports/databases/mysql50-server/Makefile,v 1.251 2010/02/16 11:03:02 ale Exp $
#
PORTNAME?=mysql
PORTVERSION=5.0.90
PORTREVISION?=0
CATEGORIES=databases
MASTER_SITES=${MASTER_SITE_MYSQL}
MASTER_SITE_SUBDIR=MySQL-5.0
PKGNAMESUFFIX?=-server .....
".ifdef USE_MYSQL
.error You have 'USE_MYSQL' variable defined either in environment or in make(1) arguments. Please undefine and try again.
.endif"
View 14 Replies
View Related
Jan 27, 2010
I tried installing virtualbox on a redhat 5.3 (32 bit) on an intel box. It cannot find prereq libSDL-1.2.so.0 while trying to install the rpm with yum. I have looked for someplace to download the prereq and cannot find it. Does anyone know where I can find the prereq?
View 3 Replies
View Related
Oct 8, 2010
I'm trying to install the nautilus-dropbox plugin for dropbox on my CentOS 5.5; while configuring, there is the following error message:
checking pkg-config is at least version 0.9.0... yes
checking for NAUTILUS... yes
checking for GLIB... yes
checking for python... /usr/bin/python
[code]....
But I think I have already installed pygtk2, as shown by yum:
Installed Packages
pygtk2.x86_64 2.10.1-12.el5 installed
pygtk2-codegen.x86_64 2.10.1-12.el5 installed
[code]....
So does the error message means that it requires pygtk rather than pygtk2?
View 5 Replies
View Related
Nov 6, 2010
As a premise let me say I'm a debian guy so I'm not really an expert on every aspect of how Centos work and if the following questioms seem dumb, I'm sorry :D What I have to for a school project is to use Xen. After two days of cursing I've managed to install it correctly and so I've installed a domU Centos 5.5.
Now I need to install sysbench on this domU and run some tests. I've found this guide: [URL].. But I can't find some commands. Basically this is what I have to do
# tar -xvzf sysbench-0.4.12.tar.gz
# cd sysbench-0.4.12
# libtoolize --force --copy
# ./autogen.sh
# ./configure
# make
# make install
the problem is it doens't find libtoolize. I've tried to search it with 'yum search" but with no luck.Where can I find this package? Or is it a command include in some other package? In that case how can I solve this problem? Next problem is autogen.sh. It says I don't have aclocal but automake in installed as a package.
View 3 Replies
View Related
Nov 28, 2009
After installing Fedora 12, all of my programs are missing the top menus such as File, Edit, and like wise I haven't been able to figure out why this is, since it has never happened before.
View 5 Replies
View Related
Dec 30, 2009
I am trying to install the intel compiler onto my 64 bit machine to compile fortran and I cannot get past this error.
When I run the install package it looks for the neccesary pre requisites tell me that I need
I was trying to follow this guide [url] and the only library that installed correctly was the last one, the 64 bit one.
When i type yum install (one of the above libraries) it comes back and says that it is already present which cannot be correct since the install program asks for them.
View 1 Replies
View Related
May 29, 2011
I would like to run Blender (3D modelling software) on RedHat Enterprise. I have a problem with missing libraries (libavutil50.so). Second problem is that I have no root access so I cannot install rpm package with libavutil50.so. Does anybody knows how can I manage this? Is it possible to install somehow libavutil50.so in my /home folder, that Blender will have an access to this library ?
View 1 Replies
View Related
Jun 3, 2010
I'm using 32 bit ubuntu and from time to time when I boot up every window I open is missing the tool bar up top that contains the minimize, expand and close buttons. usually a reboot or 2 fixes it but it hasn't worked. how do I fix this bug?
View 6 Replies
View Related
Feb 8, 2011
When I download something on ubuntu, I sometimes copy it over to my mounted Windows drive. When I then reboot into Windows, the files aren't there. They're missing. (It used to work before - now it's strangely stopped). When I log back into Ubuntu, the files are gone again!
View 4 Replies
View Related
Apr 29, 2011
I just installed Ubuntu 11.04 (gnome flavor ) on my notebook.Everything installed fine except that I'm seeing three problems I'm hoping someone can help me with (or point me in the right direction).
1. When I open any window (gcalc or Firefox for example), the 3 little buttons which are used to maximize, close, etc...) are missing. So basically in order to exit any app, I have to do it through the application rather than clicking the close button. If you go to Themes, you can see what I'm talking about. For example, the theme 'ClearLook' show's the buttons. If I choose this, these buttons are not there.Any ideas why this is happening or how I can fix it?
2. When I open any application, it positions itself in the upper left hand corner of my screen. The menu of the application is tucked under the Gnome menu bar, so basically to use any application requires me to move it first.so I can get to the app menu.
3. When I open any application, I'm unable to position the mouse such that I can resize the window. Its like the mouse cursor can't find the the fine line where it changes so that I can grab the screen to increase or decrease it.
View 9 Replies
View Related
Aug 18, 2011
In virtualBox I'm running Edubuntu 11.04. Everything worked fine until a couple of days ago, when the top section, containing the close, minimise and maximise buttons, of all windows vanished and don't appear when I re-open them . At the recommendation of TL I ran
Code:
metacity --replace
Which restored the tops while I ran the command but the command never finished and if I stopped the command I lost the tops. Also at TL's recommendation I also ran
Code:
compiz --replace
but that didn't do anything. How to restore bar permanently.
View 2 Replies
View Related
Sep 17, 2010
While i'm installing few rpm packages using yum i got missing dependency error. So how can i clear that error and how install successfullly.
View 3 Replies
View Related
Apr 18, 2010
I have a dual boot machine, and I made the windows partition 13 GB on a 120 GB hard drive.I was testing out a program on the windows partition, and I deleted it and installed a different version, now I'm trying to install the first version I was using. The problem is that its now telling me there's not enough space on the hard drive.why does the program not remove everything when I try to uninstall?if I install a program and then remove it , I should and up with the same amount of free hard drive space shouldn't I?
View 6 Replies
View Related
