Ubuntu :: Installing SoXt To Get Open Inventor To Work?
Feb 8, 2010
I've been having trouble 'make installing' SoXt-1.2.2 on the server at work. I installed a fresh copy of Ubuntu 9.10 64 bit, I'm not sure what else to mention, besides the print out of the terminal, it's quite a lot. Also I tired to use Libtools, but then I stopped when I realised I had no idea what I was doing.
I can't upload it as "You are only allowed to post URLs to other sites after you have made 15 posts or more." I'm pretty certain there are no urls in it, so I've attached it.
View 10 Replies
ADVERTISEMENT
Dec 16, 2010
Everything looks fine except that for the life of me I can't figure out how to actually open the application. The package appeared to install the app in the right directory usr>google>appinventor.when I navigate there and go under "commands for app inventor" I see three items with diamond shaped gear icons: adb, emulator, mksdcard. but when I click on them nothing opens. I'm certain that i'm missing something simple... Is there a common way to run apps not in the software center? Is there a special way to correctly install apps or a way to not do it correctly but still have the files in the right location?
View 1 Replies
View Related
Feb 27, 2010
I am a rookie running Ubuntu, and would like to know how to install Inventor 2009 on this system
View 1 Replies
View Related
Jun 23, 2011
So I just downloaded Ubuntu to be put on my other partition(I have a C: and a D: drive) So stupid me had a brain fart and ended up not making a new partition and putting Ubuntu on the D: drive which was 3/4 of my total hard drive. So now I have 120 GB for Windows and 350 GB for Ubuntu. So I went to Gparter on Ubuntu and tried to open it and it had an error before it even opened. And when I first went in to Ubuntu it had like 2 things pop up with errors. So I went back to Windows 7 and tried to use the partitioner there and it wouldn't let me expand my C: drive. What am I supposed to do?
View 4 Replies
View Related
Jun 30, 2011
I m installing need for speed world under wine. so the setup goes fine but than when i try to open it it will not open if this is important i am running ubuntu 11.04 unity
View 5 Replies
View Related
Aug 26, 2010
I frequently do the progeamming especially in java.I have very slow internet connection and I want to access the java API - documentations offline .step by step procedure how to download or set up and where to open it after installing ....Since I have installed package called " gjdoc " but it I couldn;t find it after I installed it any where
View 1 Replies
View Related
Jan 12, 2011
I cannot open firefox after I installed an add-on in the next page
HTML Code:
https://addons.mozilla.org/en-US/firefox/search/?q=molecular+viewer&cat=all&x=0&y=0
I try to remove (didn't uninstalled the add-ons that show up in USC) and install firefox
[code]....
View 3 Replies
View Related
Jan 28, 2010
I keep getting sh can't open winetricks after inputting the code sh winetricks...
i have made the winetricks file able to run as an executable file, ive installed cabextract
What else do i need to do?
View 2 Replies
View Related
Jan 7, 2010
I'm taking a course in school on computer graphics and we are using Linux as the main operating system. I myself am more accustomed to using windows but have always wanted to give Linux a try. So the other day I dual-booted my laptop with Fedora 12 and so far I'm liking it. I do have one main question however. I need to install Mesa to do my OpenGL programming with but I'm not sure how to install it. I have downloaded a tar.gz file from the Mesa website and have tried running it from the terminal by using these commands: (note: the commands are from the Linux Newbie Guide i found on google)
cd /Tudor's Home/local
tar -xvzf /Tudor's Home/MESA/MesaLib-7.7.tar.gz
cd "the new directory it was extracted to" (gets changed to the actual extraction folder)
./configure
make
make install
Now, I'm not sure why this doesn't work. The extracting doesn't even work so I'm not sure whether these commands are the same in Fedora or what I am doing wrong? I have installed aMSN from an rpm file and it worked perfectly but I'm not sure how to install using makeFiles. Any good tutorials on makeFiles and how to install them? or a link to Mesa as an rpm file? So I can start learning OpenGL.
View 8 Replies
View Related
May 19, 2009
I have 1 Pentium IV 1.7 Ghz machine with 40 gb Seagate hdd which was previously running RedHat version4. Yes very old version running squid.
I am trying to format whole hdd and installing OpenSuSe but after installing it shows booting GRUB and show L letter thats it.
I tried manually creating partitions and 2nd time automatic lay out.
View 3 Replies
View Related
Jul 31, 2011
I m using Ubuntu 11.04. I have USB modem MMX 300C HSIA Rev.A (BSNL) I m getting problem in installing wvdial. I have done following steps :
1) I have installed following packages in that same order:
libxplc0.3.13
libwvstreams4.4-base
libwvstreams4.4-extras
libuniconf4.4
wvdial_1.60.1+nmu2_i386
2) Then I run wvdial command but getting following o/p
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
--> Cannot open /dev/modem: No such file or directory
[Code].....
View 1 Replies
View Related
Oct 19, 2010
I've been using 10.04 for some time, but now Update Manager won't open, nor will Ubuntu Software. With all the apparent problems, I don't plan to upgrade to 10.10, but I do like to keep my OS updated and current.
View 9 Replies
View Related
Jan 28, 2011
Strange. After a recent update, I can no longer right click on a folder and open it as Administrator. I get this error message:
Unable to determine the program to run.
The item you selected cannot be open with administrator powers because the correct application cannot be determined.
I don't quite get this but why is it looking for a program to run? I only want to open a folder, not run a program. Anyway, I have done an uninstall and re-install of nautilus-gksu but that did not solve the problem. I have googled but no answers I could use.
Again, all I want to do is open a folder as Administrator so I can perform other operations that require root permission on files in that folder.
using: 10.04 LTS fully updated
View 4 Replies
View Related
Oct 9, 2014
VirtualBox 4.3.14
Windows 7
Debian 7.6
I'm trying to create a new VM with Debian 7.6. I downloaded the 3 install iso discs and tried to install. When I begin the installation it seems to take control of the CDROM and I am no longer able to eject it by either pressing the eject button or trying to eject through Windows. The installation goes fine until it asks if I have any other discs to install (which I do ... I have 2 more). At this point I say "Yes" but I cannot get the CDROM to open up at all since it doesn't automatically eject for another disc and as I mentioned before ... I can't do it manually or in Windows.
- I cannot do an installation over the internet because this is a government computer which is requires to be hooked to a government network. There are certain certificates required to access the network which are not available to my newly made (or in the process of making) Linux system but rather only to my host Windows system.
- I cannot use a newer version of VirtualBox because that opens up a whole new set of issues dealing with WinVerifyTrust getting CERT_E_REVOCATION_FAILURE most likely due to our symantec security software.
So my Storage Settings in VirtualBox are as follows for my CDROM drive:
- Controller: IDE Controller
- Type: PIIX4
- "Use Host I/O Cache" is checked
- Host Drive D:
- CD/DVD Drive: IDE Secondary Master
- "Passthrough" is checked
I cannot install the Debian 7.6 OS because I cannot eject each disc and put in the next disc. The only way I can eject the disc is if I reboot my entire system (host windows system) which obviously leaves me at an unfinished point in my install and therefore I have to restart the install and end up right where I was 30 minutes earlier.
View 6 Replies
View Related
Mar 1, 2016
I just set up a computer with debian (im no linux expert) and now i have trouble with getting the packages for my graphics card (its an RV635)
Im tried to do it like this page says: [URL]....
However when i try to Code: Select allapt-get update he throws an error:
W: Fehlschlag beim Holen von http://httpredir.debian.org/debian/dists/jessie/Release Erwarteter Eintrag »nonfree/binary-amd64/Packages« konnte in Release-Datei nicht gefunden werden (falscher Eintrag in sources.list oder missgebildete Datei)
View 1 Replies
View Related
Feb 16, 2011
I like to select one or two appz then install once a time.But each time when YAST finishes an installation it close without asking.If I want to install another appz in a few seconds,another refreshing repositories is needed.I have to wait a minute.It's quite annoying.Anyway to remain YAST open and let me close it manully?
View 4 Replies
View Related
Mar 7, 2011
after installing agentj in ns2.34, when i try to run tcl file iget the following error.Error: Cannot open shared library: libagentj.so: cannot open shared object file: No such file or directory is it a prob with setting the class path??
View 1 Replies
View Related
Jan 10, 2010
how to install ms office in open suse kde3.5 ,i need the procedure to get it done, i have a problem with updating and extraction of wine 1.1.35 while playonlinux is trying to instal msoffice can anybody sugest a soln fr it.
View 2 Replies
View Related
Oct 10, 2010
How do I open opera in slackware after installing it from slackbuild.
View 3 Replies
View Related
Mar 10, 2010
I am planning to install any Open-Source ( LINUX ) web browser having all dependencies/plugin-ins on one single location [DIR] and share it over NFS to all other users; So all users can run the executable to start browsing local files (Flash Tutorials) without the need of installing a web browser on every single workstation. In my case I am using Red Hat Linux 4 update 7 WS all over my work place.
View 11 Replies
View Related
Jun 28, 2011
I start up the computer, I get the Grub menu, I see the user menu, I select the user and enter password, and then it just keeps loading forever and nothing else happens...
No gnome3 or any proper interface for that matter, just the wallpaper.
What's bothering me is that it happened for no apparent reason at all, one day it's good, the next it went bonkers.
I use Fedora 15 and gnome 3, my computer is HP Pavilion dv6736nr, I have a dual boot with Win7.
View 7 Replies
View Related
Jun 27, 2010
I use Ubuntu Lucid Lynx. Sopcast player used to work properly, but from yesterday it does not open at all. It doesnt open when I click a link or even when I try to open from the menu.
View 9 Replies
View Related
Jan 22, 2011
Tonight I replaced Ubuntu 10.04 with Kubuntu 10.10. While running Ubuntu 10.04 wireless worked fine and I had no problems. However, now with Kubuntu 10.10 I seem to be having a bit of a problem with the wireless. It will only connect to a wireless network that is 'open' (no security). It sees the network i want to connect to, but when i go to put in the correct security values it does nothing. Never seems to try to connect again. I've edited both the local Kubuntu wireless settings, as well as change settings on my router (went from WPA to WEP just to see if I could get it to work. It didnt).
So im wondering if there is any other software I could use to try to manage the local wireless hardware to see if different software will connect? Here is my iwlist, not that it helps but at least it proves my hardware sees the wireless i want to connect to.
[Code]...
View 1 Replies
View Related
Sep 11, 2015
The ATI/AMD graphics hardware is:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Oland [Radeon HD 8570 / R7 240 OEM]
I installed "AMD/ATI Open Source Drivers" according to: "[URL] ....":
Reboot after "apt-get install firmware-linux-nonfree", the system automaticly reboot after grub, then went black screen forever (no tty1,tty2.., seems cannot booting). I reinstalled serveral times but same problem (having tried both cd/live dvd, debian8.1/8.2).
It seems that "firmware-linux-nonfree" is the cause, since debian crashed once firmware-linux-nonfree installed.
The problem went away by installing ATIProprietary driver("[URL] ....").
PC is dell 9020, i7
View 6 Replies
View Related
Jun 19, 2009
I have been only using the free vmware server thus far for my virtualization I have recently installed Fedora 11 and am currently looking at using the XEN virtualization software. I am currently running and upgrade from F10 to Fedora 11 with the PAE kernel. Also I am using KDE 4 with kmod-nivida drivers. Now here is what I have done
To install Virtualization requirements I did the following: sudo yum groupinstall 'Virtualization'
I then also did: sudo yum install kvm qemu libvirt python-virtinst
I then installed xen:
sudo yum install xen*
Now, I read that i needed "kernel-xen" but it doesn't appear to exists a "yum list kernel*' only displays kernel packages and the kernel PAE pakages so I figured I don't need it I then started all the xen services and libvirtd service Opened virt-manager and added a new connection: hupervisor: Xen and connection: local
I get the following error: Unable to open connection to hypervisor URI 'xen:///': <class 'libvirt.libvirtError'> unable to connect to 'localhost:8000': Connection refused
None
I guess my question now is... what is the difference between the hypervisor: QEMU/KVM and XEN. Because I seem to be able to create a VM using this. My VM is an XP vm for work purposes to run some windows only software I would like to use XEN as I just have my mind set on it but I might just be ignorant and on the wrong track is there a how to guide for fedora 11 and xen? the fedora 7 guide i found needs the kernel-xen installed.
View 13 Replies
View Related
Sep 8, 2011
I am trying to install matlab R2011a student edition in Fedora 15, 64 bits system. This version of matlab do not support 64 bits linux out of the box, but can be installed by adding -glnx86 as an argumenof the installing script.
However after running the installation script I receive the following error message:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/mathworks_32316/java/jre/glnx86/jre/lib/i386/xawt/libmawt.so: libXext.so.6: cannot open shared object file: No such file or directory
It seems to be a problem with libXext.so.6, however, I do have libXext library installed in my computer. The name of the package I have installed is:
X.Org X11 libXext runtime library
libXext-1.2.0-2.fc15 (x86_64)
View 2 Replies
View Related
Aug 17, 2011
I would like to be able to make the Yast package manager stay open after installing or removing packages.
View 9 Replies
View Related
Feb 24, 2010
My question to the community is should I preform a fresh install of OpenSuSe 11.2 or upgrade my current version of OpenSuSe 11.1? As of current I just use my system to surf the web check, email and Basic Business needs. The specs of my Laptop are:
OS Information
OS: Linux 2.6.25.20-0.4-default i686
Current user: jraglin@Jada
System: openSUSE 11.1 (i586)
KDE: 3.5.9 "release 49.1"
[Code]...
View 9 Replies
View Related
Aug 17, 2010
I have a 250 gig usb hard drive, my bios allows me to boot from it. What I would like to do is install the above 2 o/s so I can dual boot from either one.
View 1 Replies
View Related
Jul 23, 2011
I know this has got to be a beginners question but I can not find the answer. I have searched the forum, the wiki, and the reference. I have used google and found the answer as it applies to red hat but doesn't work in debian. Found a couple of more but they didn't work either. I need to open a port for ssh to work. I have it working on 3 computers but the 4th has the port closed and I can't open it. I have openssh client and server installed and running. I am using Wheezy/testing on an acer laptop.
View 4 Replies
View Related
