I want to install GNOCHM to (application to view chm files) view .chm files on ubuntu. Now, as far as from what ive learnt, it isnt available as a complete package on the web and has to be compiled, etc.. I have no idea how its done..
So iwould be really grateful if someone taught me how to start from scratch.. For a start, ive downloaded the gnochm-0.9.11.tar.gz from the sourceforge site.
I tried installing System-->Administration-->Synaptics Package Manager and I got following error
Code:
gnochm: Depends: python-gtkhtml2 but it is not installable I am using Lucid 64 bit and in my sources.list multiverse ,partner ,universe ,restricted and backports are enabled.
I have an old computer I have setup as a backup computer / Linux practice computer. It is a Sun Ultra2 w/ 2x200MHz SPARC CPUs, 512MB RAM, 9.1GB SCSI HD, and Creator 3D video card. It is running Debian 6, by default with no GUI installed. But, I am wanting to try out several minimalistic GUIs with it. So, first thing I did was:
aptitude install icewm
aptitude install xserver-xorg-video-sunffb
aptitude install rcconf (used to disable X from automatically starting)
aptitude install xfe
startx
And well, it worked. Well, for some reason, I couldnt read any of the buttons in xfe, and it was stuck in the upper left corner of the screen. So then I tried PCManFM, which was better, but the icons were still all blank. However, upon trying other WMs, I have had very little success. I got dwm working, but didnt try it out for too long before removing it and trying others. I was able to get LXDE to work, and that was that last thing I got to work. Now Ive tried IceWM again, as well as jwm, and every time I end up with a black screen.
By the way, any suggestions on a WM/FM (and maybe panel) combo would be greatly appreciated as well. Even with IceWM and PCManFM, this system is pretty slow. Its really going to mostly be used as a backup internet machine. Whats the bare minimum setup to get icons on the desktop?
Since CloneZilla doesn't include the MBR when saving a partition into a file, I need to take care of this myself. With a working XP in /sda1, I'd like to...
1. Boot with a Linux live CD
2. replace the Windows MBR with Grub, ie. without any Linux already installed
3. save Grub's configuration files into /sda2 (which is ext2fs-formatted)
4. add XP to Grub
This is the error I get after executing gnochm :
Code:
Traceback (most recent call last):
File "/usr/bin/gnochm", line 1914, in <module>
recent_list = pickle.load(open(path_rec, 'r'))
File "/usr/lib/python2.5/pickle.py", line 1370, in load
[Code]....
EOFError
It was working properly until I issued this command :
Code:
gnochm book_name.chm 2>/dev/null &
When the install button is pressed an error sign says "metalink is missing".Is there a way around this or better still a way of removing windows altogether and start from scratch?
View 4 Replies View RelatedDoes anyone know how to start back from scratch? Im thinking Im just going to not do what did before and start all over *sigh*
View 9 Replies View Relatedi have just installed ubuntu 10.04 dvd version and ho and behold grub error 15 just amazing any way i enter the partition via live cd thinking i edit the menu.lst file and that it but the folder grub it completly empty what is going here and how can i fix this?
View 9 Replies View RelatedI want to reload windows xp + Ubuntu from scratch, I have no experience with dual-boot installation soNow we start with a blank 250GB harddrive in my Samsung N310 netbook, and then,Plan 1: partition the whole 250GB harddrive into 2 logical disk, namely drive c: and d:, both of them are NTFS, and then format them ==> install windows xp to Drive C: ==> boot from USB drive and run Ubuntu USB installer, and let the installer do its partition for Linux's EXT3Plan2:partition the whole 250GB harddrive into 3 logical disk, namely drive c:, d: and e:, with drive c: and d: being NTFS while drive e: being EXT3 ==> install windows xp to Drive c: ==> install Ubuntu directly to drive E:
The bottom line here is that 1) there must be 2 logical drives (both are NTFS) for windows xp; 2) I want a EXT3 partition where Ubuntu resides. Can any expert kindly advise me which plan mentioned above is more viable or feasible?
From what I have read around the net I should be able to set up my hard drive so that I have one small partition for Windows 7, one small partition for Ubuntu 10.04 and the remainder can be a third partition which contains all my files (accesible from both OS).irst question, is this possible?I tried to install Windows 7 first (I hear installing Ubuntu first creates havoc), then i tried to use the partition editor that comes with windows 7 and it wont let me shrink the partition any smaller than 700GB even though it is 98% free ( I have tried defragging thatdrive).Now Im wondering, can I use GParted to format my disk, then set up all the partition, and then install the OS's
View 9 Replies View RelatedI am dual booting Windows 7 and Ubuntu 10.10. When I am on Windows 7, I have no noise from the hard drive. When I use Ubuntu, every now and then I hear a short scratch noise from the hard drive. It didn't start doing it until installing Ubuntu when I was setting up the partitions.
View 9 Replies View RelatedI'm running openSUSE 11.2 KDE 64 bit. I'd like to install everything required for the Android SDK. I don't have any of it installed atm. Can anyone recommend an existing how-to? All I find are Ubuntu-specific tutorials. I'll need to install java, eclipse, and the Android SDK. I have not used/installed any of this before, so I'm looking for a detailed, step-by-step guide for openSUSE 11.2 KDE.
View 6 Replies View RelatedI have a home computer that I bought to try Linux. first I want to reformat the HD so it is completely empty, it has xp now, then start from scratch. But I have not been able to format the HD. I have used all the tricks I know.
View 1 Replies View RelatedI was a Jaunty user and then updated to Karmic. Wireless went from being sporadic in Karmic to non-existent after I tried the wrong fixes. I've changed so many settings and tried so many fixes that I don't know which way is up with the wireless. I'd like to start from scratch. If I install from CD, will it just write over my current ubuntu partition? Will the contents of home stay intact or will everything disappear? Do I have to create a new partition?
View 2 Replies View RelatedI was wondering if anyone could provide resources on creating and installing keyboard layouts from scratch. I am a conlanger(I create languages), and I need to be able to map certain unicode characters to certain keys. I could do this via creating a font, however, It would be easier if I could just switch between layouts which is easier than switching between fonts. Especially, when I am using more than one program at once. I'm sorry because I have never used the Ubuntu forums before and I probably posted this in the wrong forum.
View 1 Replies View RelatedI have forgotten my user password and cannot get past the logon screen. Is there a way to recover beside reinstalling Ubuntu Studio from scratch? (I am new to Ubuntu Studio).
View 4 Replies View Relatedon my laptop, I have configured my power button to hibernate the system. It works, but once a while the system, after booting and while almost being where Gnome desktop appears, reboots itself from scratch.
Configuration:
- EeePC 1000HE
- Debian Squeeze up-to-date
- Hard-disk encryption via LVM installed while installing the system
Starting from what I would think is completely from scratch, maybe worse. A friend set up this computer on unix/linux when I expressed interest. Truthfully I don't have even the slightest clue where to start other than to offer my complete humility. If I could start with getting my dvd and cd functions to work that would be a good start.
View 15 Replies View RelatedWhile trying to upgrade from 9.10 to 10.04, I consistently get the error:
Failed to fetch http://ca.archive.ubuntu.com/ubuntu/...e_1.34_all.deb Hash Sum mismatch
I've tried on multiple computers and on virtual box, in all cases using alt-f2 typing 'update-manager -d' and following the instructions from there. I've also tried downloading the link separately but get the same error.
Any ideas? Should I just install it from scratch?
I noticed that every time I logged in my network icon always moved to the middle of the top panel. Getting tired of moving it back every time I decided to remove the panel and start from scratch. But I cannot find the me menu or the shutdown/logoff/switch user menu. So I cannot rebuild the panel the way it was. How can I find these items?
View 8 Replies View Relatedi tried my first linux installation with Fedora distro. using the live 64 usb boot version, everyhing looked fine. BUT i had issues with WINE so by recommendation, i went with Ubuntu and flushed Fedora. So, technicaly, the install works fine, during the process of installing from the live usb 64 bit 10.4 ubuntu. BUT at the end, when installing GRUB, it just simply failed! thats's a shame for me what i can tell you is the following. (thats what i think is my problem, but i need some expert help tho!)
my motherboard is a ASUS, im using 3 HDD 500GB sata2 drive, configured as a RAID in the bios, strip 0. so it presents to the OS one partition of 1.5 TB. Fedora detected it correctly, and was able to install grub on that now, during the Ubuntu install, i can chose to pick up a partition that was not used on my 1.5 TB ( i reduced my partition to 1TB and allowed 500GB to linux). Windows 7 reside on the first partition. on this disk, partition 1 is a 100MB windows bootmanager. partition 2 is windows 7 itself 1TB.
during the install of ubunto, i tell him to create a / partition, using 480GB as the third partition, and i created a 4th partition as a swap for linux. the install process the information, install the DATA on the third partition... BUT grub, can't !!! it failed... it keep looking for a /dev/sda disk... when installing GRUB, i can chose the drop down, for the 1.5TB disk, and when i press OK, he just simply try again to access /dev/sda disk... which is full of course and within a BIOS raid..........
setting up a web server and somehow searched the net for the best secured and optimized combination of packages. To focus on an example, let say you wanted to put up a website that's most likely similar to myspace / friendster / facebook or other related social network with high traffic. It would be nice to have a step-by-step guide on what are the requirements and best combination of packages to use. I'm sure this would be of best interest to everyone specially those who are just starting up. As we are going to focus on a webserver to host our own website lets assume we have the initial hardware/software resources for our server such as
A Core2 Dou 2.33Ghz CPU with 4Gb memory, 80Gb HD
Ubuntu 10.10 Server 64bit.
HardwareWhat would be the advisable internet connection speed that can accommodate the type of website that we're putting up. (please consider that we are going to host this at our own home)I pressume the hardware mentioned above is more than enough but just incase, Do we need more hardware resources than the one mentioned? (considering the huge amount of photos that will be uploaded)Software What would be the best choice combination of packages for the following ?Http Server (ie. nginx, apache and etc)
Email Server (ie. postfix, courier and etc)
Email Client (ie. roundcube, squirell mail etc)
Database Server (ie. mysql, postresql and etc)
[code]....
I'm booting ubuntu from my android phone via USB and it works great, the thing is anything i install or do while using ubuntu isnt saved the next time i boot from the usb unless its saved in my phones storage. I want to be able to keep booting ubuntu the same way but keep the programs i install there for the next time instead ohttp://mac.bigresource.com/add/add.phpf starting from scratch everytime.
View 3 Replies View RelatedI am looking into creating my own terminal command from scratch. I researched online for some information on this subject was only able to view stuff related to OS X. I understand that they are both Unix based, are they both similar in creating these commands? Basically all I would like is for someone to point me towards the right direction to start or complete this task.
View 11 Replies View RelatedI recently installed CentOS 5.4 in my laptop. Initially I had difficulties in getting the machine up and running. So I went with the option of installing just the bare bones of CentOS 5.4. I did this by clearing all selections that are shown by default when you load CentOS 5.4 CD 1/6. This installed just the kernel and created only the root user. Right now, my laptop boots up in command line and I can login only as root. I would like to know if there is any document or any web URL that explains how to get a fully functional system from the scratch. Something like an installer manual or check list with instructions. Is there any document that you can refer to in situations where you have to manually install the drivers and configure the system because of some odd combination of hardware the machine has.
View 14 Replies View RelatedI have only a CD Drive and the system is stand alone. Do I use the 5 CD set or Do I use the "Live" CD Thing?
View 2 Replies View RelatedI have 13.0 installed, everthing works OKI installed 13.1 on a separate partition, and dualbootWhen I use 13.1, there is a problem with sound.It's like in the old days when yu played an LP with a scratch, the track keeps repeating.When I move the mouse, sound will continue OK for a few seconds, then same problem.There is no difference, if I use KDE, XFCE, or just boot in runlevel 3 and use the command lineOnly thing I can find in the logs:Quote: May 28 06:37:10 cannabis kernel: hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.In 13.0, there is not such a line in the logs.Some info:Quote:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Fujitsu Technology Solutions Device 1107
Flags: bus master, fast devsel, latency 0, IRQ 22
[code]....
I recently installed CentOS 5.4 in my laptop. Initially I had difficulties in getting the machine up and running. So I went with the option of installing just the bare bones of CentOS 5.4. I did this by clearing all selections that are shown by default when you load CentOS 5.4 CD 1/6. This installed just the kernel and created only the root user. Right now, my laptop boots up in command line and I can login only as root. I would like to know if there is any document or any web URL that explains how to get a fully functional system from the scratch. Something like an installer manual or check list with instructions. Is there any document that you can refer to in situations where you have to manually install the drivers and configure the system because of some odd combination of hardware the machine has.
View 2 Replies View RelatedI cant seem to find any new good working How to setup SFTP from scratch. Im running CentOS 5.4
View 2 Replies View RelatedI have a netbook with limited storage. 8GB internal and a 16GB SD card. Right now I have Ubuntu installed on the 8GB internal storage with a few directories mounted on the 16GB SD card. (/usr and /usr/local). This has worked out fairly well for me as having the entire installation on just the 8GB drive was too limiting. When I tried this I didn't know how big to make the partitions I was mounting in. These partitions are 7.06GB for the root (on internal storage) 2.8GB for /usr/local and another 2.8GB for /usr (both 2.8GB partitions are on the 16GB SD with the extra space being media storage for me). It seems I didn't make these partitions big enough because I can no longer perform updates. I'd like to redo all of this from scratch. how would you recommend I partition this next time around? Do I need individual partitions for the separate mount points that aren't root? Are those the directories I should be mounting on the SD card?
View 1 Replies View Related