Ubuntu :: Installed 10.10 - Unremovable Watermark In The Bottom Right Corner That Says - AMD Unsupported Hardware
Mar 1, 2011
I've used ubuntu before, mostly because it works when windows doesn't and I just got a new amd fusion netbook. The acer aspire one 522.
I have a couple issues, 2 with grub, and one with an amd watermark.
1. There are two ubuntus and two ubuntu memory tests in the grub, I can't see any difference between them, after I booted the first time into ubuntu and updated, I restarted and the grub gave me two ubuntus.
Can I remove the second one from the list? (not an issue I just want to clean it up)
2. I need to make windows 7 the default operating system, I've looked at other guides and I can't figure it out. I've tried menu.lst, and when I try grub.cfg I can't change the default.
3. I installed the unofficial drivers for the wireless adapter and graphics card (6250 on fusion) and now everything is working fine with them, except I have the unremovable watermark in the bottom right corner that says "AMD Unsupported hardware"
How do I remove this?
BONUS question! How do I tell ubuntu, this is my netbook, stop denying me access to my own computer and let me in that folder!
I can't access the root folder, and I'd like to do install things without ubuntu asking me for my password every time. I'm not worried about other people being on this netbook, no super valuable info, and not really anyone else is on it anyway. Any way I could give it a master password and roam freely inside my netbook?
View 6 Replies
ADVERTISEMENT
Mar 12, 2011
How do we get rid of the "Unsupported Hardware" watermark? The best advice I've found is to download the video driver directly form AMD. So I got this file
ati-driver-installer-10-12-x86.x86_64.run
I've no idea how to install it, and after I double-click it seems Ubuntu doesn't know what to do with it either. Any ideas?
View 1 Replies
View Related
Aug 8, 2014
I recently installed debian 7.6 on my laptop and at first when I booted into the OS gnome went into fallback mode because the driver for my gpu wasn't installed so I went and installed the firmware-linux-nonfree .deb......everything is fine gnome3 works.....I do have a little "lag" when I switch from "windows" to "applications" in the activities menu, but other than that it works good other than the annoying AMD Unsupported Hardware watermark at the bottom right of my screen. I have tried a lot of "fixes" or workarounds, but to no avail.
Here is a little info of my gpu:
Code: Select all$ lspci | grep -i radeon
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Trinity [Radeon HD 7520G]
I just reinstalled Debian 7.6 and the first thing I did was install make, linux headers, and gcc. Then I installed the AMD catylist driver then I rebooted went into recovery mode and input:
Code: Select allaticonfig --initial then I rebooted and started Debian regularly and viola everything works perfect with no AMD watermark
View 0 Replies
View Related
Jul 14, 2011
Whenever I move my cursor to the bottom right corner of my screen it sticks there for a moment, but then lets me move it again. No issues as long as I don't go in the corner.The effect seems to affect an area 4cm long and 2cm tall regardless of what is showing on the screen. Changing to proprietary drivers has no effect.
System:
Ubuntu 11.04 - Gnome Shell
ATI HD-5770 GPU
View 5 Replies
View Related
Jul 25, 2011
This is a small screen shot of my problem: I've changed the default icon for eclipse but this problem existed before I've done that. I'm using AWN Dock. How I can get rid of it?
View 9 Replies
View Related
Jan 2, 2010
I have installed Mint8. I was using VPN connection before to be able to use skype (it's blocked in the Middle East...) but can't get it to work in Linux I've installed the network manager, added and configured the VPN connection but when I click on it to connect it doesn;t do anything. No window popping up, no error message... anyone has got an idea what else I should do in order making it work? or how else can I use skype without logging into private networks?
another "problem" we have got 2users on Linux and the other one cannot see the wifi icon in the bottom right corner on his desktop. after nm applet (or some command like that ) i got back that its been taken by another user. so can only one user see this icon on his desktop??
View 1 Replies
View Related
Apr 6, 2009
I might get harassed for making this windows/linux comparison, but i'm seriously wondering why i cant find any application that can display a quick little notification on the bottom right hand corner of my screen whenever there's some intrusion attempt.
For example, sometimes I can see that in my /etc/logs/secure (or something like that) there's someone who's trying to attempt to connect to me using random usernames/passwords from different servers. The only time I know this has happened is when i actually open the file with gedit. Is there anything like (norton for windows) that can display little notifications (with or without eye candy)??
View 4 Replies
View Related
Mar 24, 2011
I am using Xubuntu 10.10 64bit . When I press the quit or logoff buttons on the desktop it takes me to the logon screen and then at the bottom right corner it allows me to shutdown or reboot. I would like to bypass this screen entirely,and just shutdown reboot from the desktop. Only I use this machine at home ,no none else needs to log on. Is there any way to do this?
View 3 Replies
View Related
Sep 1, 2011
Just installed Gnome 3 via UGR and the top and bottom of the screen wont render as it should,.
View 2 Replies
View Related
Apr 20, 2010
is there a way to have gnome open in the upper right or left corner instead of the lower left corner when i start it?
View 3 Replies
View Related
May 22, 2010
So about an hour ago I put my computer on standby. For whatever reason I couldn't bring it back so I restarted it. It works fine except now Ubuntu has pushed my display down. This means that the bottom of my tool-bar on the bottom of the screen is cut off, and there's a black bar on the top. I'm using a T.V. screen so there is no way I can manually adjust it. I also plugged my desktop back into an old monitor and it was off-center downward too.
View 1 Replies
View Related
Jan 5, 2011
I installed Phatch but I can not figure out how to use it. Documentation sucks. I want to watermark a ton of images. Can someone get me started? Or at least agree that with me that Phatch is not easy to figure out?
View 1 Replies
View Related
Feb 18, 2010
I met a guy who is going about with a thermal imaging device. He wants to remove the watermark from the images and tells me that the software developed by the company can do this using only the jpeg. Unfortunately it's only available for windows. I'm dubious that this is possible, but I have to admit I'm not extremely well versed in image manipulation. Is it possible to extract the unadulterated image from a copy with the watermark and other data on it?
View 4 Replies
View Related
Feb 25, 2011
I'm trying to find out how to add watermark to a video using a ffmpeg via console, because I have to do it quick. There is tutorial on ..... (other forums use also this video tutorial) for this but there is a small problem - in ffmpeg 6.1 there is no more vhook subsystem which is used in tutorial...
View 12 Replies
View Related
Jun 15, 2011
I have the following issue: I want to upload some documents on my site(mostly pdfs) with watermark and as far my status is: I have managed to get my watermark in:
transparent png
pdf format
>> When it is a text/pdf I use a script using pdftk, which merges the pdf version of watermark to the pdf document (success)
>> When it is a scanned document(pdf) if I use pdftk, it only works if I apply the watermark as stamp (foreground not background). But in this case the watermark overlaps the original document despite the fact that watermark has the right opacity.... (fail) So the only solution is to apply a transparent watermark. So the question is:How to make a pdf transparent Or how to apply watermark from png file I tried adobe acrobat with wine and it applies the pdf watermark as stamp(foreground) with right opacity so I suppose it was a kind of bug maybe from pdftk, but I would like a command like way to do it so that I can make a script.
View 3 Replies
View Related
Aug 7, 2010
I debootstrapped an install into an existing lvm and booted into it and everything is working great except that after initrd hands off to boot the real root, the text font changes and the resolution is unsupported by my old monitor. The box is up and running because I can ssh in. This is more of an annoyance than anything as I only use the console when something is broken, but it does need to be resolved.
I used dpkg-reconfigure console-setup as described in the debootstrap config guide but I don't see an option for changing the "vga" statement before it regenerates the initrd.
View 2 Replies
View Related
Oct 21, 2010
I recently received an automatic update to my 10.04 system which included some kernel stuff. I am using vanilla repositories, I haven't added, removed, or altered any of the default repositories. I downloaded and installed the updates using the graphical Update Manager found in System->Administration
I'm running Ubuntu 10.04, and my kernel is listed as 2.6.32-25-generic. I haven't installed any new hardware whatsoever; my hard disk drive is the same as it has always been. When I go through System->Administration->Disk Utility, then view my hard drive, the line: SMART Status: reads with a grey circle and then "Not Supported" I am able to run the Benchmark application from Disk Utility and it completes without problem. This happened to me where I was unable to view SMART data after automatic updates involving the kernel when I was using Ubuntu 9.10.
View 1 Replies
View Related
Dec 26, 2010
I have installed Ubuntu 10.10 in my desktop, and network doesn't work, are nForce 7 network cards unsupported in Ubuntu?
View 1 Replies
View Related
Jun 14, 2010
I'm helping a friend set up his new pc and we're having a lot of trouble getting his second monitor to work.He has a GeForce GTS250 video card which has a HDMI output port as well as VGA. His main monitor is connected via the VGA and works fine. The second monitor is a Soniq QV320H TV which he wants to connect via HDMI. The nvidia settings configuration shows both monitors (set up as separate x-screens) but the only output on the Soniq is a black screen which flashes "unsupported" about every 2 seconds. Currently the resolution is set to auto (1280x1024) but we've also tried lower resolutions (down to 800x600) with no success.
View 3 Replies
View Related
Jun 25, 2010
I've searched all over the internet and have found numerous threads on this topic, none of which have helped me fix the problem. I'll post as much info I can about my setup.I have 3 hard drives... one is for ubuntu (9.10), one is for my data, and one is for Windows7. It looks like this:
1st drive (hda) = ubuntu
2nd drive (hdb) = data
3rd drive (hdc) = windows
[code]....
View 6 Replies
View Related
Mar 13, 2010
It's now working... if any of you have this problem:
I'm not sure but I think it's how it worked...
HTML Code:
Last night I updated system including kernel (2.6.32.9-70.fc12.x86-64), then my system couldn't start, I fixed it by booting into a previous version of kernel and:
Code:
Then I was able to boot in newest kernel, nothing blurry or so, but my Desktop Effects won't work ( want compiz to work :P )
When I try System->Preferences->Desktop Effects it says 3D isn't hardware supported.
WHen I tried "compiz --replace" it says:
Code:
I get this at boot.log:
Code:
I went to /etc/rc.d/init.d/functions and in line 520 I found some action() ( I suppose it is the same for everybody...
Now I look at my xorg.conf, and it has only this:
Code:
How could I have my effects working again ? I know a lot of people had problems with newest kernel and nvidia drivers but they all seem to be working after installing akmod ...
View 2 Replies
View Related
Feb 26, 2010
So I've been trying to convert .avi files to .mov using FFmpeg. I input something like this:
Code:
ffmpeg -i in.avi -b 1000 out.mov
And it says:
Code:
Unsupported codec for output stream #0.1
So I tried adding -acodec mp3 OR -acodec libmp3lame and it says unknown codec.
I went to install libmp3lame-dev using
Code:
sudo apt-get install libmp3lame-dev
And it comes up with this:
Code:
The following NEW packages will be installed:
libmp3lame-dev
The following packages will be REMOVED:
libdc1394-22{u} libfaac0{u} libxvidcore4{u} linux-headers-2.6.28-11{u}
linux-headers-2.6.28-11-generic{u}
I'm fairly sure I don't want those packages removed? Should mention I'm on Ubuntu 9.04 64-Bit.
View 9 Replies
View Related
May 16, 2010
I've been googling all afternoon to fix this error I get. The situation is as follows: I have multiple harddrives (3x320gb and 1x160gb) all on the SATA interface. One of these drives contains Windows, and the rest I use for programs and downloads. I've installed Ubuntu 9.04 from a USB-stick using the installer's partitioner to make some room for Ubuntu (Ext4 filesystem). I've tried Ubuntu and SUSE in the past.
View 1 Replies
View Related
May 21, 2010
I have a video - taken on my mobile phone. In totem, I get sound and video: lovely. However, in Openshot I don't get sounds, and in WinFF it tells me "Unsupported codec (id=7372" for the audio stream. Why, when both are using FFMpeg do the installed codecs work differently in different programs?
View 2 Replies
View Related
Jul 18, 2011
suddenly after upgrade
2.6.38-10-generic-pae ===> Error 16: Incosistent filesystem structure
2.6.38-10-generic-pae (recovery mode) ===> Error 13: Invalid or unsupported executable format
2.6.38-10-generic ===> Error 13: Invalid or unsupported executable format
[code]....
b08e48b7-1194-49c1-a743-91e7ee90334e is a link to /dev/dm-2 which is my root partition on nvidia raid
PS: At first it did not boot at all dropping out to grub shell, but I managed to boot it with gparted live usb stick and chroot to Ubuntu and re-install grub, but now 2.6.38-8 kernel works and 2.6.38-10 is not
View 1 Replies
View Related
Jul 22, 2010
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too
Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]....
View 7 Replies
View Related
May 29, 2010
My setup is: Debian Lenny 5.0.4 I have an ATI Radeon X1200 series (embedded in the motherboard).What version of the ATI official drivers do i need? I recall that i was having troubles with the latest drivers, because ati has dropped support for these products. Another question is: Does Lenny 5.0.4 will work with the previously mentioned graphics card, or they had upgraded the version of Xorg to an unsupported one?
View 14 Replies
View Related
Sep 14, 2010
I recently did upgrade from F12 to F13 using preupgrade, and I was following the guide from the Fedora project website [URL]
On the section Removing unsupported packages it shows how to find orphaned packages and sugest you remove them. I tried that, found a bunch of packages that I promptly erased. But then I
came across
ModemManager-0.4-5.git20100720.fc12.x86_64
I thought "well I don't use a Modem" so I tried to yum erase it. I stopped when I saw that it was trying
to also remove the dependencies, a bunch of NetworkManager packages.
My question is, why is ModemManager flagged as an orphan if it has packages depending on it, isn't that wrong?
And also, the recommendation on the guide to remove these packages can be dangerous to people who don't pay attention (imagine someone accidentally removing NetworkManager, no internet).
I will keep the "orphaned" package out of necessity, but something is wrong in this whole deal.
View 3 Replies
View Related
Feb 11, 2010
I have ripped quite a few movies onto my server and I play them on my PS3 with mediatomb. I haven't changed any of the settings in handbrake except I was playing around with the quality meter on the video tab. Some of my movies will play and others won't. The ones that do not play say something about an unsupported file type. They also will not play in Movie Player.
View 3 Replies
View Related
May 6, 2010
I have an nc8000 that gives a "104 unsupported wireless network device detected" error when I plug in my Intel wifi card that I acquired recently. Based on reading, this is a common HP problem due to non-native HP hardware. If I insert the Intel Pro card after the HP boot screen, 10.04 loads just fine and Ubuntu detects the card.
1) Machine Brand and Model (PC/Laptop): HP/Compaq nc8000
2) Wireless Brand, Model and Wireless Chipset: 02:04.0 Network controller: Intel Corporation PRO/Wireless 2915ABG [Calexico2] Network Connection (rev 05)
3) Check interface:
lo no wireless extensions.
eth0 no wireless extensions.
irda0 no wireless extensions.
eth1 unassociated ESSIDff/any
4) Check for modules:
Code:
Module Size Used by
binfmt_misc 6587 1
snd_intel8x0 25588 2
snd_ac97_codec 100646 1 snd_intel8x0
ac97_bus 1002 1 snd_ac97_codec
fbcon 35102 71 .....
5) Network configuration
Code:
$ *-network:0
description: Wireless interface
product: PRO/Wireless 2915ABG [Calexico2] Network Connection
vendor: Intel Corporation
physical id: 4 .....
6) Scan for networks:
Code:
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
irda0 Interface doesn't support scanning.
eth1 No scan results
7) Ubuntu Version:
Code:
Ubuntu 10.04 LTS
8 ) Kernel/architecture (including 32 vs. 64 bit):
Code: 2.6.32-21-generic i686
View 2 Replies
View Related
