Ubuntu Installation :: Will Not Install To New Solid State Drive
Jun 12, 2010
Had a laptop with a Hardy install - my two year old knocked it on the floor and after that it no longer recognized the drive, and I could hear the hard drive read head hit the platter when it tried to read it.
I bought a new Kingston 128GB solid state drive to replace my old 40GB drive - figure it will be more robust.
I tried installing Lucid, and it stopped after partitioning the drive and was unable to format it. I attempted to use my old Hardy install disks, and had the same issue. I spent time with Kingston tech support, they had me try a few things, then RMA'd me a new drive. New drive still had the same error.
I figured something else must've broke and let it be for a while. Today, just for the heck of it, I attempted to install XP on it. Flawless. So, it's not a hardware issue.
Any known issues with the Ubuntu installer and Laptop SATA-2 Solid State Drives? (I'll put more details in a later post if needed, don't have them at this very moment)
View 4 Replies
ADVERTISEMENT
May 14, 2011
What should be done to completely wipe clean a solid state drive (before selling a computer)? What should be done for a regular drive, and what considerations apply to a SSD?
View 6 Replies
View Related
May 26, 2010
I'm having a particular problem trying to partition a solid state drive on a Dell Mini 9; I'd like to install Ubuntu Netbook on the computer. The machine came with MS Windows XP on it. When I try to use the automated installer, it fails and quits at the partitioning stage. I have tried both fdisk and parted but both of these also fail and quit with errors when they try to write to the disk. I've also tried using Fedora and Knoppix to install and they both fail as well. I did check in the BIOS that the drive, supervisor and user passwords are clear.
Some technical bits that fdisk chucks out;
[ 1913.488878] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 1913:494318] ata1.00: failed command: WRITE SECTOR(S)
[ 1913:500232] ata1.00: cmd 30/00:02:3f:00:00/00:00:00:00:00/e0 tag 0 pio 1024 out
res 51/05:02:3f:00:00/00:00:00:00:00/e0 Emask 0x1 (device error)
[ 1913.511226] ata1.00: status: { DRDY ERR }
[ 1913.517018] ata1.00: error: { ABRT }
can get access to partition the drive or diagnostics to tell what is the problem with the drive?
View 1 Replies
View Related
Aug 21, 2010
I was looking into getting some solid state drives for the 1st time. I have always used Seagate traditional SATA drives for my home systems but I think I would like to try something new and that has much better performance. Do you guys know if I will see any performance gains and or issues using SSD on Linux? I run Arch and Debian Linux in general...
View 14 Replies
View Related
Jun 25, 2010
I'd like to build a compact x86 host running off a CompactFlash or some equivalent solid-state memory instead of from a SATA disk, to reduce the risk of failure once they're deployed at customers' premises. Those are SOHO users, so performance is not an issue, but stability is (The less I have to drive to replace faulty hardware and restore data, the better.)
Do you know if the usual suspects (Ubuntu, CentOS, Gentoo, etc.) can easily be made to run from solid-state memory, and if yes, is there some good documentation to customize them thusly?
I assume it's just a matter of tweaking /etc/fstab, but it could be more involved.
View 7 Replies
View Related
Nov 16, 2010
60 gigabyte SSDs are down around US$100.
It seems like the optimal use would be as a cache for the regular hard drives in my computer. Eliminating the need for a fast hard drive, so I can just use a slow 2TB (~US$100) drive with a SSD cache.
Is there a good way to do this yet?
It seems like it would be nice to be able to exclude some files from caching, for things like bittorrent.
Reviews of some SSDs: [URL]
View 9 Replies
View Related
Jul 26, 2009
With the new Intel G2 SSDs coming out, I'm thinking about upgrading my hard drive. However, there seems to be an extra level of software support needed for SSD drives. From what I have read there can be performance degradation over time and other issues. Does anyone know how well SSD drives are supported in Linux and also if there is support for the TRIM command or if it is planned?
View 10 Replies
View Related
Jun 11, 2010
I use ubuntu on about 3 machines, have installed it many times, and run it virtually with software and been using Ubuntu and many other distros for about 8 months now. I am still pretty much a noob and when it comes to CLI I have no clue and need it all spelled out for me. So I'll cut to the problem. My problem is that about every 10-15 minutes my netbook (Samsung N130 1.6ghz atom 2GB 800mhz RAM 160GB HDD and 128mb GMA GPU). All of my other ubuntu or any other linux distro for that matter do not have this problem I am about to explain.
So it gives me a false signal that the HDD is in use. Like an example... I'll be browsing a web page and all of a sudden it stops... I'm not running anything else or downloading anything internet is there and just stops. I can move the mouse and when I hover over objects it highlights but a click is unresponsive. And I have noticed everytime it does this it lasts about 20 seconds and the HDD indicator light stays a solid color but when I listen the HDD is it's normal sound (no ripping of data or anything).
View 5 Replies
View Related
Jul 5, 2011
I have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
View 6 Replies
View Related
May 23, 2010
I have two computer systems at home (a laptop and a pc), one with ubuntu 9.10 and the other being windows 7. Since i recently discovered how awesome counter-strike:source runs on the latest edition of Wine, I no longer need Windows 7 on my system.
The question is, I have partitioned my laptop at least 5 times the last 6 months, and I want to find out if my hard drive could cope with repartitioning once more. Could you guys please give me the name of a tool for Windows to check the state of my hard drive?
View 3 Replies
View Related
Jan 1, 2011
I've picked up an HP Simplesave external drive. It comes with some fancy software that is of no use to me because I don't use Windows. Like many current consumer-targeted backup drives, the backup software is actually contained on the drive itself. I'd like to save the drive's initial state so that I can restore it if I decide to sell it.
The backup box itself is somewhat customized: in addition to the hard drive device, it presents a CDROM-like device on /dev/sr0. I gather that the purpose of this cdrom device is to bootstrap via Windows autoplay the backup application which lives on the disk itself. I wouldn't suppose any guarantees about how it does this, so it seems important to preserve the exact state of the disk.
The drive is formatted with a single 500GB NTFS partition. My initial thought was to use dd to dump the disk (/dev/sdb) itself, but this proved impractical, as the resulting file was not sparse. This seemed to be because the NTFS empty space is not filled with zeroes, but with a repeating series of 16 bytes.
I tried gzipping the output of dd. This reduced to the file to a manageable size — the first 18GB was compressed to 81MB, versus 47MB to tarball the contents of the mounted filesystem — but it was very slow on my admittedly somewhat derelict Pentium M processor. The time to do that first 18GB was about 30 minutes.
[Code]...
View 1 Replies
View Related
Mar 21, 2010
I was thinking of trying out the UEFI support that HP has in my laptop BIOS in the next few days. My reasons is that I get a custom boot logo... and (hopefully) a better boot-speed. What is the current state of affairs with the openSuSE UEFI/EFI install support on a empty hdd for x86_64 does anyone know? (badly worded I apologize) This may seem naive but I have struggled to answer this with most posts being about Mac's for obvious reasons.
Specifically, Do I have to have any custom knowledge on formatting the HDD with a GPT partitions or does the installer do this for you? Secondly, How well does the UEFI bootloader tie in with the config tools in YaST2? (I would like to have UEFI but if it turns into some headache in setting up the boot area by hand each time the kernel updates I will forget it.) I can safely say this will be a machine with only openSuSE installed as an OS, no need for any others or any dual-boot problems. This isn't overly urgent and I will dedicate (at least) a whole weekend to tweaking once I buy a new disk and install openSuSE on it. If nobody knows then I will dive in head first and report how I find it and any problems (and severity).
View 7 Replies
View Related
Aug 2, 2011
i did an install of squeeze without selecting anything during tasksel. after install i changed my sources to testing, updated, and did a dist-upgrade. i then installed xfce4 and xfce4 goodies. i noticed some of the xfce4 packages have the current state 'pa'. for example:
[Code]...
this makes me worry some things didn't install all the way, because if i did aptitude install xfce4-power-manager it would install it and leave make the current state 'i'.is there anyway to install all the packages labeled 'pi'?
View 3 Replies
View Related
Feb 26, 2011
I was in real doubt where to put this, so I hope I picked the right forum; otherwise, my apologies!
I want to build Roadsend PHP on my system. There seems to be no way to do this with the package manager, so I have to build it from source.
Turns out it depends on something called 'Bigloo'. Again no luck with the package manager, so I had to build this one from source too.
I took version 3.0c (Roadsend website recommends this version), did a
Code:
./configure && make && make install
, which did the job. Builing Roadsend worked, but I got a runtime error, which had to do with the Bigloo version.
No problem, I tought, then I'll just install Bigloo 3.1a. I did a "make uninstall" in the 3.0c dir, and tried to build 3.1a. This also worked, but now when I try to make Roadsend, I reports:
Code:
*** ERROR:bigloo.heap:
Release mismatch -- Heap is `3.0c', Bigloo is `3.1a'
So, somehow, there are still traces of 3.0c on my system. Maybe some file that didn't get deleted or some table entry that hasn't been undone?
My question is: How can I remove all traces of this version? Apparently, "make uninstall" is not thorough in this case.
And: Is there a general solution to remove everything when I did a "make install". So that my system is in the same state as it was before I ran the command?
View 4 Replies
View Related
May 6, 2010
So much for an LTS release being stable. I try to boot from a LiveCD and it hangs on "Checking battery state..." I searched the forum for a solution but didn't really find anything. This is an old desktop machine with Intel onboard graphics -- nothing too fancy and nothing it should have a problem with. Yet it's not working.
View 1 Replies
View Related
Jul 16, 2011
I ran the 11.04 upgrade. At the end, it reported a failure, implied a recovery would occur and the upgrade then finished. The recovery was supposed to have run sudo dpkg --configure -a. That does not appear to have happened. I am concerned that a reboot will render my system inoperative.Has anyone else experienced a similar issue or have any suggestions? What information should I provide. report.
View 2 Replies
View Related
Feb 9, 2011
I'm a bit perplexed on this issue. I searched through Google looking for similar issues and can't seem to find one that quite fits and I was wondering if someone else has heard of this happening.
I recently installed Ubuntu 10.10 (32 bit) on a friend's Dell Inspiron 1501 to replace the entirely screwed up Windows Vista that was on it. The install process went without flaw or issue. Everything worked perfectly out of the box. My issue comes when I try to copy files from my terabyte external onto the computer (the files she had backed up from her vista install). Files larger than about 300MB cause the computer to freeze up solid. The only thing that works is the power button to force shutdown. There's no mouse... nothing. This made me think there was a hardware issue but...
The external drive has no issues on any computer other than this one so I'm inclined to think the Dell is causing the issues. I ran Ubuntu's drive test and it reported no errors, and MemTest 86 comes up with no errors.
So, I'm looking for some educated guesses. If Ubuntu can handle installs and lengthy updates with no problem, but then connecting an external USB HDD and copying over files causes it to freeze up tighter than I've ever seen Ubuntu freeze before... could a faulty USB port cause this? Motherboard? Ubuntu itself? I'm installing Ubuntu from CD.
View 6 Replies
View Related
Jul 1, 2010
System Specs:
CPU: Intel Core2 Quad Extreme X9450
Memory: 4GB, Patriot DDR3 PC3-10666 1333Mhz
MoBo: ASUS P5E3 Delux
OpSys: Ubuntu 10.4 (64Bit)
Short Description: I wanted to see what would happen if I upgraded from Kubuntu 8.04 (32bit) to Ubuntu 10.4 (64bit) by copying my home directory then restoring it after the upgrade. It almost worked sans a few interesting problems that I'm hoping might teach me a bit more about how Ubuntu works.
Detailed Description:
1. I copied my home directory to another hard disk.
2. I let the installation disk for Ubuntu 10.4 (64bit) reformat and overwrite the disk that contained Kubuntu 8.04 (32bit) and chose to maintain the partition and swap size for that disk.
3. Once I worked out some bugs in the hardware and got the OS up and running smoothly, I "merged" my home directory with the backup I had created in step one. (Merge was an option given to me when I was attempting to paste the files copied from the backup disk.)
4. It should also be noted that I was trying for a while last night to install TrueCrypt. In order to do that I had to check its "sig" file. The GUI for the gpg installation was complaining that I didn't have gtk+-2.0 installed so I installed gtk (I think it might have been 2.4 or whatever the most recent one was) from source without any errors. It got late so I gave up on attempting to install TrueCrypt any further.
The Results: This morning the computer seemed to boot faster than it had been before, but I was left without a functioning Theme manager. It will open, and I can click on all of its features, but nothing seems to do anything. For example: If I right click on the desktop and choose "Change Desktop Background" Then select "Get more themes online", nothing happens. Also if I select the "theme" tab, there are only two themes listed when there used to be about 9 by default.
Questions: 1.) Is there a way to restore the files that are important for correct system operation (possibly all the files starting with a dot ".*") in my home directory to there default state like they would have been from a fresh install, but without doing a fresh install and without loosing any of the documents or archives in my home file?
2.) Is this even the correct approach or might this cause more problems? For example, if your computer had this problem would you try and restore the home directory, or would you troubleshoot each problem as it arises one at a time until everything became stable?
3.) What could I do next to continue troubleshooting the theme manager?
I'll keep researching and trying to find some links that can help while I wait for your responses. If I find anything that helps I'll post the fix here.
View 1 Replies
View Related
Apr 14, 2011
I am having a hard time installing Edubuntu 10.10 on a Toshiba L30
System specifications:
Toshiba L30-140
Intel Celeron M CPU 410 1,46 GHz
ATI Radeon XPress 200M Series
MATSHITA DVD-RAM UJ-841S
Bootable with CD/DVD only
While installing Edubuntu, I encounter two problems:
Can not mount...
I will reach to the screen to select to install Edubuntu and it will even show the green leds. I push F1 to get more detailed messages. After 2 minutes or so I will have this error message:
Code:
This error appears randomly. Out of ten attempts to boot, 6 times I will get this error message. 4 times I will get to...
Checking battery state ... [OK]
This will advance up to "Checking battery state... [OK]" which will freeze there with no DVD or HDD-Activity visible.
I encountered very many threads on the "checking battery state" issue, but they seemed obsolete to me, since most of them referred to Ibex. Also this is the Edubuntu LiveCD, it has not yet been installed on the HDD.
Nonetheless, for the Checking Battery State problem I have tried solutions for Ibex such as "acpi=force pci=noacpi" and "acpi=off". But it wouldn't work. Some people also suggested changing the graphic configurations, this is ATI however, not Nvidia and the BIOS does not offer the option to change it.
Strangely, the installation has worked brilliantly (with the same dvd) on another computer (some Laptop Toshiba L30), so I don't believe it might be a damaged disk.
View 1 Replies
View Related
Jul 12, 2010
Dell Optiplex GX260 (w/onboard Intel graphics) Original install was Ubuntu 9.04. Upgraded twice, first to 9.10, and 2 months or so ago to 10.04. Problem never occurred before version 10.04.
BUG HISTORY: Googling on this problem reveals that it has been around since at least Ubuntu 8.10.
I'll be working away and all of a sudden the entire desktop blows off the screen and is replaced with a console stuck in a loop. The last message I always see in the console is "Checking battery state", then the endless looping begins.
The only way out is CTRL+ALT+SYSRQ+K (kills Xserver, I think) followed by CTRL+ALT+SYSRQ+B (reboots system).
NOTE: If I attempt to restart Xserver, Ubuntu goes into an endless console loop with the same "Checking battery state" message. Does that help anyone figure out what's going on?
I have tried to remove any laptop program that manages power and they uninstall ubuntu-desktop. What gives with Ubuntu's GNOME being dependent on laptop utilities? I'm running a desktop and have no need of laptop utilities.
I have gone to the extreme of starting Ubuntu in Recovery Mode, dropping to a root shell with networking, then removing GNOME and Xserver completely and re-installing them both. The problem STILL occurs.
I have used the following commands to accomplish this:
This problem has made Ubuntu extremely unreliable, as it can crash at any time and DOES... MANY TIMES in a day!
View 5 Replies
View Related
Apr 21, 2011
I just installed ubuntu on my m11x and am completely new to ubuntu. After installing the latest driver for the 335m I am stuck at checking battery state and there is no way I can get to the gui anymore. The only access I have to are the tty's and I don't know what to do. I have already tried finding a solution for a couple of hours, but cannot find any. Please help me solve this problem, I do not want to reinstall again.
View 2 Replies
View Related
Jul 27, 2011
I have a setup with 3 hard drives. The first hard drive has windows 7 and is a solid state, for my fast computing needs. The second hard drive has another copy of windows 7 on one partition and Ubuntu 11.04 on another (and SWAP space).The third hard drive is just storage.Grub is installed on the first(SSD) hard drive, as well as the MBR (master boot record) for the two windows installs (select win7 in grub, then it lets me select which windows install to boot).Now I want to get rid of my solid state drive, and just run from the second hard drive with dual boot.How can I install a new MBR on the second hard drive without having to re-install both OS's?I've tried removing the first hard drive and using bootrec.exe to re-write the MBR and it will not work.I can install grub, and it boots to ubuntu but when I try windows 7 it says there is no MBR.
View 9 Replies
View Related
Jan 27, 2009
I installed F9 for a friend. She wasn't getting any sound. I ran aplay -l, but got no sound card listed. I ran lspci -v, but got no sound card listed. However,the output of lspci -v said the computer had a particular motherboard. I Googled for it and was told it had an onboard sound card. That led me to the package called realtek-linux-audiopack-4.06a, which I installed. It included an installation script, which I ran.
The script didn't work to compile various files it was supposed to, but it did work to delete various files from my friend's system. Here are the bits of the script that removed files:
echo "Remove old sound driver"
if [ -d /lib/modules/$KERNEL_VER/kernel/sound ]; then
rm -rf /lib/modules/$KERNEL_VER/kernel/sound/pci > /dev/null 2>&1
[code]....
In the result, the failure of the compilation didn't matter, because lspci -v lied. She didn't have the motherboard shown, but a different one without an onboard sound card. Of the files deleted by the script.
I was able to reinstall libasound.so.2 and libasound.so.2.0.0, but I haven't yet tried to reinstall the other ones deleted by the script. Now, I want her to buy a sound card, but I'm afraid it won't work unless all the deleted files are reinstalled. I'm looking for guidance as to how I can reinstall the files deleted by the bits of the script I set out above, without completely reinstalling Fedora.
View 4 Replies
View Related
Nov 6, 2010
How do I make the panel solid and not transparent as seen in the attached image.
View 2 Replies
View Related
Apr 24, 2009
I was just wondering if there is a way to capture current state on a machine and create live cd from it?
If not - what is the best way to create Live CD with optimazied system updates and configuration packages.
View 1 Replies
View Related
Dec 10, 2009
I don't have a working DVD burner. I'd like to transfer the FC12 install DVD image to a USB thumb drive, and install from there. Is that reasonably easy to do?ow would I transfer the .iso file for the install image to the USB thumb drive in such a way that I could boot from i
View 1 Replies
View Related
Mar 17, 2010
I was trying to fix my audio driver so that my speakers would work after installing Linux Mint 8. I rebooted it to see if it worked but the computer won't boot up. It gets past the toshiba screen and the mint logo shows up like normal, but then I get what I think is an error message. I can't be sure though because the screen is not showing a solid picture. If I hit escape, I get another similar screen. If I hit escape again the screen goes blank and I can no longer get it to do anything. I'm new to Linux and not much of a computer wiz.
View 5 Replies
View Related
Jun 9, 2010
System spec:
Core 2 Quad, Q6600, 2.4GHz OC'd to 3GHz
Asus Rampage Formula m/b
2x WD RE2 500GB HDDs ("linux boot" and "winxp boot")
1x Seagate Barracuda HDD ("boneyard")
4GB DDR2-800 RAM
Ubuntu 10.04 LTS
I'm having a really annoying problem with disc activity on my desktop system. Basically, if anything is writing a large amount of data to the hard drive (say, 10MB or over), the machine basically freezes solid. The mouse goes jittery (you move it and it takes a second then moves in one big leap).
For instance, if I try to image a USB hard drive to a file:
# dd if=/dev/sdh of=usbdrive_dump bs=1G
Effectively this works in two portions: it reads 1GB of data to RAM, then blats it out into a file. The machine is perfectly responsive while the USB drive is getting thrashed, but locks solid when the internal SATA drives are in use. Writing to USB HDDs doesn't seem to have the same effect -- I can copy 1GB files to/from them all day long and the machine is perfectly happy.
View 2 Replies
View Related
Jun 29, 2011
I installed Ubuntu 10.10 last night, it worked fine, installed my graphics drivers, worked fine, and then I ran "sudo apt-get update" and then "sudo apt-get upgrade". There was about 240MB of packages to be downloaded, and since I was going to be on for a while, I did. I didn't restart after it finished, I just turned off my computer and went to bed.
Well now, when I turn on my computer and boot to Ubuntu, after the boot screen, my monitors stay on, but show a blank screen. There is no boot up sound, the HDD light is solid on, and I can't access terminal through Alt + Ctrl + F1.
View 2 Replies
View Related
Feb 5, 2010
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies
View Related
