Ubuntu Installation :: Using A "reserved" IP Under DHCP For The Networked Printer?
Feb 23, 2011
Searched this forum and Brother's resources but still can't get the Brother HL-2070N to play on 10.04. Especially troubling since 10.04 is an LTS. Wether throught SPM or Brother's PreInstall followed by an RPM converson I still can't locate the correct drivers. Done it countlees ways and still have never seen HL-2070N show up on the driver screen. Still stuck with HL-2060 whose best match flags "out of paper".
BTW; using a "reserved" IP under DHCP for the networked printer. Essentially a fixed IP.
View 6 Replies
ADVERTISEMENT
Oct 13, 2010
Is there any way to make it so I can let my laptop go into standby that is connected to my printer and make it so that I can still see the printer from my other systems. Then if I print something it brings the networked printer/laptop out of standby and prints my job. I just ran a test and when my system went into standby the printer went "offline" and I couldn't print from it. I don't want to be forced to leave my computer fully on 24/7 to have a networked printer.
View 4 Replies
View Related
Oct 10, 2010
While I was setting up CentOS 5.5 for my first time I faced this problem which is connecting to a printer is not possible, my tutor told me you need to change from eth0 to eht1 or eth2, what does that mean? And if I do this, how can I connect a printer which I have its name and IP address.
View 4 Replies
View Related
May 10, 2010
I am using ubuntu 9.10...now I have created an USB startup disk in my 1gb pen drive with a persistence region of 200MB. But after I have booted into the live ubuntu version using the pen drive how will I access the reserved space?.. I have tried mounting the pen drive but still couldn't access the reserved space.
NB:-I have only one FAT32 partition in my pen drive...
View 3 Replies
View Related
Jan 3, 2011
I've bought a HP Photosmart printer, HP Photosmart wireless e-All-in-One printer - B110a and i've got a problem installing it properly. I'm using Debian 6.0 Squeeze. When i connect the printer, Debian doesn't recognize my printer as the Photosmart B109 printer for unknown reason. When i go to the site of HP and search for a driver, it directs me to this site:I've downloaded that latest hplip file as a .run file and installed it. My printer is recognized proparly, but when i try to print a colored image, it comes out black/white. Something is not crrect. Does anyone recognize this problem with this type HP printer?
View 7 Replies
View Related
Oct 14, 2010
will going from 10.04 desktop to 10.10 netbook mean i have to reinstall everything? also, does the netbook version support mounting of networked drives?
View 3 Replies
View Related
Aug 3, 2011
I'm setting up a netbook for somebody (in another country!) and one of the last hurdles is the printer setup. I only have the netbook and not the printer with me. I know that the printer is a HP PSC 1215 All-In-One Printer but there seems to be a Catch-22 that I need to have the printer connected in order to be able to set this up using the GUI tools. How do I work around this? As a minimum I just want to enable printing, although scanning would be a bonus.
View 1 Replies
View Related
May 19, 2010
i have a 700GB ext4 partition for storage purposes. By default it has 5% of the space (35GB!) reserved for root, which does not make sense for this partition. how can i reduce this percentage? there is already a lot of data on the partition and i'm afraid that mke2fs would erase all the data. is there a way to change the percentage without touching the data?
View 1 Replies
View Related
Nov 8, 2010
i'm running out of partitions, i was thinking if i could get rid of the windows system reserved partition without messing any of my windows 7 OS & the recovering partition. I'm currently using grub2 to boot ubuntu & win 7.
View 6 Replies
View Related
Dec 30, 2010
I'm trying to change the owner of a /var/www/example/var I've changed all the /var content (chown www-data /var instead of chown www-data var ). I tried executing chown root /var, but now I have problems with Postfix...
In my webpages I use different commands to send mails:
- The phpMailer class
- The mail() command
The phpmailer is working, but not mail()
When I try mail() I've these messages in /var/log/mail.log:
Code:
Dec 30 09:42:31 zeus postfix[3829]: error: to submit mail, use the Postfix sendmail command
Dec 30 09:42:31 zeus postfix[3829]: fatal: the postfix command is reserved for the superuser
Terminal mail command is not working either.
In my /etc/php5/apache2/php.ini I've this configuration:
Code:
[mail function]
; For Win32 only.
; [URL]
;SMTP = localhost
; http://php.net/smtp-port
;smtp_port = 25
; For Win32 only.
; [URL]
;sendmail_from = dstreich.girona.ics@gencat.cat
; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
; [URL]
sendmail_path = /usr/sbin/postfix
I also tried sendmail -t -i without luck.
View 2 Replies
View Related
Nov 30, 2010
Is it true that I can safely set reserved blocks percentage to 0% on some ext4 partition which contains only my personal data but no OS files?
View 1 Replies
View Related
Jul 9, 2009
Is there anyone that can tell me what the above error is all about. When I beet my Centos5.3 server I get the error it doesnt effect the bootup and the system is working fine but the error I am assuming isnt a good thing.
View 3 Replies
View Related
Oct 22, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address. When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
iface vlan100 inet static
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 6 Replies
View Related
Jul 1, 2010
Back in April I set up a Ubuntu DHCP server and a multiple VLAN network [URL] to migrate our various servers, workstations, etc off the 192.168.1.1 /24 network that everything was on because we where running out of address space. I built out the new network and everything worked great except our AD server would never get an IP address from the DHCP server (static reservation) and even if I set the IP statically on the AD server it couldn't ping the gateway and noone could log in. After several attempts to resolve this, including bringing in outside help, we where never able to figure out what the problem was.
Now 6 months later I have time to revisit the issue without effecting the live network. I used Acronis and imaged the AD server last Friday, cloned it on to another box with the same hardware, and put it up on the new network that's been sitting unused for the last 6 months. Today when I statically set the IP on the AD server (which is what I want) it connects and I can ping it's gateway 192.168.1.1 and all the way across vlans to a test sales agent workstation at 192.168.8.xxx on vlan 800 but only if I statically assign the agents station an IP address.
When I try to get an IP address via DHCP it fails as destination unreachable. Nothing has changed in the last 6 months on the DHCP server but now it for some reason can't ping its default gateway 192.168.1.1. All of the config files are the same as they where left from the post linked above aside from the vlan id's used where changed from 1's to 100's (i.e. vlan 3 is now vlan 300) /etc/network/interfaces
Code:
auto lo
iface lo inet loopback
auto vlan100
[code]....
why it can't reach the gateway, when I do a tcpdump I can see the DHCP requests come in on eth0 but the server never responds and I'm pretty sure its because it isn't "seeing" them since it thinks there isn't a network connection but I don't know how to trouble shoot to find out where the problem lies.
View 2 Replies
View Related
Aug 2, 2011
I'd like to use pyRenamer to identify and rename files with reserved characters in the file name. The files came from windows where I'm guessing the characters didn't cause problems. For example, I want to replace the ? (question mark), ' (single quote), etc. I tried using the escape () character before the special character in the replace field on the substitutions tab, but for some reason I don't believe that method was identifying the special characters. What is the correct way to identify a special / reserved character within a file name and replace it?
View 1 Replies
View Related
Aug 8, 2010
On Windows, I used to be able to search for items on my home server quickly if it had indexing enabled by simpily typing a query in the search box when I was viewing one of its drives (i.e. samba shares).Since I moved the server to Ubuntu, I can find plenty of indexing software like tracker but I cant figure if any of them support querying them over the network. I need a fast way to search through all the files on the server with indexing without the hassle of having to VNC into it.
View 1 Replies
View Related
Nov 23, 2009
I just upgrade to Fedora 11.
I have problem in installing the printer, no matter add printer in local network or Windows Printer via Samba.
The summary is as follow:
I have download a printer driver and had installed but got error when I tried to printer a test page.
View 6 Replies
View Related
Mar 8, 2010
Currently I have my eth0 interface getting a DHCP address but at times the DHCP server will not be reachable. Sooo what I would like my server to do is if it cannot find a DHCP server assign a static address to eth0. Then start the DHCP service so it can then dish out some addresses.How can I do this? Surely it is possible
View 2 Replies
View Related
Aug 4, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices.My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server.One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network.
View 4 Replies
View Related
Jan 15, 2010
I'm running this command to increase the available storage area of my ext3 drive but It has no effect.
Code:
I would like to get more storage space out of this drive since it's only use is a backup mirror of the ntfs drive.
I think that drive size might be related to something else.
View 10 Replies
View Related
Sep 26, 2010
I have a problem after newly installation of rhel5. Actually i am not facing any problem by this but getting this message at system startup PCI: Bios Bug: MCFG area at e0000000 in not E820-Reserved.
View 1 Replies
View Related
Jul 21, 2010
Installed fedora/configued samba, shared printer and i am not able to access shared printer from any of the fedora machine. I am able to access the printer /shared folder from windows machine. I dont know the process of cups installation.
View 1 Replies
View Related
Oct 31, 2010
I have an embedded device for which I've created an html configuration page. This page allows you to set static IPs, dhcp, and can scan for wireless devices. My problem is that in order to access the device it requires that it runs as a dhcp server otherwise people are not assigned an IP and so can not access the embedded devices static IP. (This config page is for the laymen and so they are not the type who are able to set up their own static IPs). One of the potential options is to have the device connect to the network on eth0 acting as a dhcp client. However this prevents me from running a dhcp server. One solution I can think of is running a dhcp server only if it doesn't detect another dhcp server running on the network. However I have no idea how this could be setup.
View 2 Replies
View Related
Sep 2, 2010
I will be running a network of +- 35 Ubuntu pc's from next year on. I have already started setting up remote desktop viewing utilities, but I now need a way to remotely shut down all the pc's at the same time, with a simple command as Admin. Setting up scripts to execute at a certain time is not gonna help, as the online time wont be the same all the time. I want to avoid having to remotely shut down each and every pc, as this will take quite a lot of time.
View 3 Replies
View Related
Dec 6, 2010
I have installed Tomcat on one machine and MySQL on another. When I run tomcat on the same machine as Mysql and use 'localhost' in the jdbc url, I have no problem accessing mysql through jdbc. So my problem is accessing a remote mysql instance. I have granted privileges in the following way from the MySQL prompt:GRANT ALL PRIVILEGES ON mydatabase.* TO myusername @192.168.0.103 IDENTIFIED BY 'mypassword';
FLUSH PRIVILEGES;
Still I get :
com.mysql.jdbc.exceptions.jdbc4.MySQLSyntaxErrorEx ception: Access denied for user 'myusername'@'192.168.0.103' to database 'mydatabase'
sun.reflect.NativeConstructorAccessorImpl.newInsta nce0(Native Method)
sun.reflect.NativeConstructorAccessorImpl.newInsta nce(NativeConstructorAccessorImpl.java:57)
[Code]....
I have no idea whether this is a problem at the operating system level i.e. allowing networked hosts, or whether it is something to do with MySQL. I have commented out bindaddress and, on this version, there is no 'skip-networking' line to comment out.
View 4 Replies
View Related
Dec 11, 2010
Ok here is the deal, I am allowing my neighbor access to some networked folders on my ubuntu file server in exchange for access to their washer & dryer. I have already created mapped drives on their xp machines but now I want to only allow them "read only" access so they don't accidentally delete anything?
View 6 Replies
View Related
Feb 8, 2010
first: PXE flawless bind to dhcp address but put next binding state to free second: when installer calls init script to reinit ethernet driver (e1000 (vmware)) binding fails 11.2 opensuse fail to reinit dhcp with log entry "no free leases" third: when manual set network install works how to preserve dhcp lease on reinit of driver?
View 1 Replies
View Related
Jan 14, 2010
If I DL something from the Internet It askes were to save. This is normal however even though my 2 computers are nicely networked I can't seem to navigate to the network to save onto the other computer.
View 6 Replies
View Related
Jan 23, 2010
So having recently set up my server (including some disk space and ushare, and an additional laserjet printer) I was wondering if anyone had any experience of putting a multifunction printer into an ubuntu server and adding it locally (to the server) then to the networked computers....I know this printer works perfectly (the scan too!) when plugged directly into a machine's USB....I suppose my real question is....does anyone know anything about the scanner side of it?? is this going to work?? I reckon the printer side will (/should - i know the printer works and i know the server can share printers.....lol) but the scanner side is relatively new (when put into the context of shared from my HS.Please note:My server is just running vanilla (plain) ubuntu 9.10....and my compo's are 10.04 and 9.10....ubuntu ONLY network...
View 1 Replies
View Related
Aug 8, 2011
I have developed a site in localhost in my laptop. Here are the specs: Ubuntu 11.04, Joomla! 1.7, Db Ver: 5.1.54-1ubuntu4, PHP Ver: 5.3.5, Web Server Apache/2.2.17
This laptop is connected to a wi-fi network. Task: I like to see this local site from my laptop to other desktop computers in the same network. I understand that I need to do some changes in /etc/hosts what changes I need to do to be able to see my localhost site in the network.
View 2 Replies
View Related
