i have a 700GB ext4 partition for storage purposes. By default it has 5% of the space (35GB!) reserved for root, which does not make sense for this partition. how can i reduce this percentage? there is already a lot of data on the partition and i'm afraid that mke2fs would erase all the data. is there a way to change the percentage without touching the data?
View 1 RepliesToday I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
I have a rack of four 1TB drives all partitioned identically with three primary partitions. On each drive
- the first partition is only 64MB;
- the second is a large 900GB partition and
- the last holds all the remaining space
mdadm has been used to set up
/dev/md0 - RAID1, comprised of /dev/sda1 and /dev/sdb1
/dev/md1 - RAID5, comprised of /dev/sda2, /dev/sdb2, /dev/sdc2, /dev/sdd2
/dev/md2 - RAID5, comprised of /dev/sda3, /dev/sdb3, /dev/sdc3, /dev/sdd3
OK, so it was a silly mistake to make - but I am now need to increase the size of /dev/md0. My thinking is to reduce the size of md1 so that I can grow md0.
On md1 I have two logical volumes. I've successfully reduced the size of the volume so that I can reduce the size of md1. Now I'm at the nervous stage; I can find little written on the topic of shrinking RAID5 arrays - and even if I do this I'm unsure if I can move partitions around to regain the space I so desire.
so i have f12 installed on my hd with lvm using the whole extent of the HD , i want to reduce it so i can dual boot it with a windows system, i managed to reduce the logical volume to free some space, but i cant seem to reduce the physical volume, is this possible and how ?
View 2 Replies View RelatedI am using ubuntu 9.10...now I have created an USB startup disk in my 1gb pen drive with a persistence region of 200MB. But after I have booted into the live ubuntu version using the pen drive how will I access the reserved space?.. I have tried mounting the pen drive but still couldn't access the reserved space.
NB:-I have only one FAT32 partition in my pen drive...
I have some contiguous free space available next to where my root partition resides on the hard drive. I was thinking of resizing the root partition with gparted to take up this space, but it's kind of risky. I was wondering if there is another way to include this partition into my Linux partition without resizing? Like somehow link it in so that / will have more free space?
View 1 Replies View RelatedMy root partition seems to be full bur is wrong because I have a partition with 15Gb space and the data is arround 7.5Gb I have:
Quote:
~$
PHP Code:
sudo df -lha
S.ficheros Tama�o Usado Disp Uso% Montado en
/dev/sda5 15G 14G 660M 96% /
proc 0 0 0 - /proc
/sys 0 0 0 - /sys
[code]....
When I look for specific info about what is taking the space using du command I get that the space used by the root system is 7.2Gb. I get to the same conclusion when checking the space with Nautilus.
I'm not sure if I can even explain this properly! I'm attaching a hopefully self-explanatory screenshot of
(1) system monitor saying that 23.3 out of 24.6 GB of my root is used (!!!)
(2) diskanalyzer showing root should be 5.9+4+3.3+some small stuff = about 15 GB.
At startup I get a warning saying something along the lines of "you only have 50MB available on root file system.. you should delete unnecessary files.. " and that opens Disk Usage Analyzer.
Possible suspect - I had been trying out VirtualBox. On root. My virtual machine did have an 8gig hard drive, expandable I believe. But it never got past 1.7, and I've removed it, uninstalled VB and removed it from trash. (Is this weird: my trash is at /home/me/.local/share/Trash/files - took me a hell of a while to find it!)
With 100MB available on root I can barely do anything! My whole compiz/config setup even disappeared after a reboot!
Today I was notified on my netbook that my root folder is running out of space. When I ran the disk analyzer, it showed that most of the space is going towards the videos folder in /media/win7. My ~/Videos folder is symbolically linked to the videos folder on my Windows partition, which is mounted in my fstab using ntfs-3g under /media/win7. The question now is, shouldn't the videos only exist in the windows partition? /media/win7 usage shouldn't affect space usage in my root folder right?
View 6 Replies View RelatedI am having an issue adding unallocated space to my root partition. Based on other threads I figured out that the unallocated space needs to be right next to the partition that one wants to extend. In my case, I would like to extend 'ext3' in attached screenshot of gparted. I carved out a 1002MB space and moved this unallocated space right under the ext3 partition (/dev/sda3). How do I add this unallocated space to /dev/sda3 please? When I run 'gparted' on bootup (using linux running on a usb stick), I don't get the option to increase the size of /dev/sda3. Basically the unallocated space is not being 'seen' when I try to resize /dev/sda3.
$df -l
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda3 3844152 2935868 713008 81% /
none 502400 260 502140 1% /dev
none 508008 248 507760 1% /dev/shm
[Code]....
I have serwer Debian with my website. My provider splited the disc into 5GB partition for / and 495GB partition for /var. Everything was going ok for over two years but now I don't have enough memory on /. I'd like to increase the partition but the problem is that /var is just next to it so I can't easily change the end of the first one. I need some safe solution. It might be even just shrinking partition for /var, adding new one after if it helps anyhow (I have about 450GB free memory).
Some outputs
Code: # df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/sda1 5201536 5173904 0 100% /
tmpfs 1023464 0 1023464 0% /lib/init/rw
udev 10240 2672 7568 27% /dev
tmpfs 1023464 0 1023464 0% /dev/shm
/dev/sda2 478812280 10336484 444345032 3% /var
overflow 1024 4 1020 1% /tmp
# parted print
GNU Parted 2.3
Using /dev/sda
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: ATA ST3500418AS (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
1 512B 5369MB 5369MB primary ext3 boot
2 5369MB 500GB 494GB primary ext3
3 500GB 500GB 538MB primary linux-swap(v1)
l my root (/) partition has 11G free space and my /home is only left with 5g around and /usr has around 8g in my fedora 13 .So is there any possibility to "resize" the root partition and add it to home partition bcoz i see the opposite in the threads(resize home to add space to root).My home has nothin more than a movie which is 700MB and i've installed some new application yesterday. But it shows half of the space is almost used!!!
/dev/sda7 12G 925M 11G 9% /
tmpfs 497M 2.6M 495M 1% /dev/shm
/dev/sda9 12G 5.0G 6.0G 46% /home
/dev/sda8 12G 4.1G 7.3G 36% /usr
i'm running out of partitions, i was thinking if i could get rid of the windows system reserved partition without messing any of my windows 7 OS & the recovering partition. I'm currently using grub2 to boot ubuntu & win 7.
View 6 Replies View RelatedSo, I wan't completely paying attention to the default partitioning that Red Hat Enterprise 6 does.
I was setting up a base image for VMWare and the disk was 200GB, but for some reason the default is for about 40% to go to the root partition and then the rest of it to go to /home (this doesn't include the 2GB or so in swap).
Is there an easy way to recover the space under /home and expand the root partition? Assume there are no user accounts created.
Is it true that I can safely set reserved blocks percentage to 0% on some ext4 partition which contains only my personal data but no OS files?
View 1 Replies View RelatedI installed 11.4 (64 bit) and all went amazingly smooth. I created three logical partitions (boot, swap and home in this order) and an extended partition with root and backup. Just prior to the installation, my external backup drive went belly up so I created a 40 gig partition to "fill in" the backup duties until I purchased a new one. I got it and set it up and then deleted the 40 gig backup partition thinking I would just add the now unallocated space to the root partition but alas it was not meant to be. I can't resize the root partition while it's mounted and I can't unmount it and have a working system. The 40 gigs of space is sitting right next to root (no having to jump or resize other partitions to combine the two). Is there a way to do this or did I just waste 40 gigs worth of real estate.
View 9 Replies View Related1. Pentium 4 with 1.8 gh 2. 512 ram 3. 15 gb hard disk. installation specially regarding partition option (eg.. how much alloted should be for swap/ root/home etc)
View 1 Replies View RelatedI recently tried a frugal/poor mans install of knoppix that I placed in a folder in the root partition of /home (hda7) in opensuse 11.3. I decided to delete the folder and contents. The hard drive was busy for several minutes and after it was finished, I checked the disk usage and found that / was at 97% capacity, up from what was 10gig of free space. I could not find any traces of the deleted folder or its contents, so I used puppy linux and ran e2fsck on the / partition. Puppy linux reported 1.9gig free space and opensuse reported .5gig free space. My concern is if the deleted folder is taking up space in the root partition that I can not locate and why the difference in reported disk space usage in hda7. Also, if more packages are installed, where are they placed (/ or /home)?
View 3 Replies View RelatedMy laptop has 2Gb of ram, 4Gb of swap, 40Gb hdd and an intel pentium 1.40GHz cpu, even when compiling stuff or maxing out everything the 4Gb of swap is never touched, with such a small hdd I'd like to reduce the swap to about 2Gb (just in case) to free up some space, does anyone know what commands/tools are available to accomplish this?
View 3 Replies View RelatedI originally had an Ubuntu partition on my hard drive which occupied about half of it. I installed Windows 7 in the remaining unallocated space and I was planning on doing a grub update from a live cd afterwards. BUT when I looked at my partition table, the space where the ubuntu partition used to be is now unallocated space!
View 5 Replies View RelatedI have been installing Fedora 8 Linux with already having Windows Xp as my primary OS....
I have a total of 80GB Hard disk.Out of 80 GB,I have freed 8GB for Linux.But during Installation after "selecting language for keyboard" and then choosing "Create Custom Layout", while giving partitions I have alotted 4GB for '/' and 2GB for Swap.
Initially space was created for root(/)...but it is unable to create space for swap and all other boot,home etc...
It is showing the error msg as "Could not create partition as there is no space left for /(root)"...
Does anyone know how to delete the "System Reserved" partition ??
View 9 Replies View RelatedI have a server with 2 harddisks, configured a one logical LVM block. I would like to reduce the total footprint and remove the 2nd harddisk.
What is the best way to do this? I understand that Gparted has yet to support LVM.
My details as follows:
[root@localhost ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
282G 11G 257G 4% /
/dev/sda3 99M 12M 82M 13% /boot
[Code]....
i have /var mounted on /dev/sda4 which consists of 38 GB i want to get 8 GB from /dev/sda4 as this partion will remain of 30 GB.how can i get 8GB in such a way that my OS will not hurt.
View 2 Replies View Relatedmy home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..
So I transfered a few folders with videos in them to the public folder on an Ubuntu 10.04 laptop I have from my Ubuntu 10.04 64bit laptop. When I wanted to delete the folder I didn't have permission so I ran "gksudo nautilus" so I could delete it as root. So I deleted the folder but I did not get the space back!
I went to /.local/Shared/Trash and one of the folders I deleted was there but deleting it didn't get that space back either.
I did some searching but most of what I find doesn't help or tells me to look in the folder /.local/Shared/Trash folder but that didn't help any.
I have a home directory which is mounted on the LVM partition,How can i reduce the size of LVM partiotion without loosing the data on home directory...whenever i use lvreduce command it show me a warning mesg that the whole data will be lost...reducing the size of LVM partition without loosing my home directory data.
View 1 Replies View RelatedI have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?
View 4 Replies View RelatedCurrently, my partitions are set up as such:
83GB ext3 free space
~10GB ntfs HP/Vista Recovery Partition
~93GB Ubuntu (Hardy Heron)
I tried to just have two partitions (recovery and ubuntu), but because of the different file systems, and the placement of the hp recovery partition, it has to be right in the middle. This is basically what I want to do:
1) Reinstall Hardy Heron on a new (smaller) partition from the free space partition.
2) Once it's working properly, format the rest of the hard drive (getting rid of the recovery partition) and create a single ext3 partition.
3) Install another distro on this new partition.
Does anyone foresee any complications with all this slicing and dicing of my hard drive for which I should/could prepare?