Ubuntu Installation :: Upgraded To 10.04 And Now Brother HL-CDW4070 Does Not Work
Jun 22, 2010
I just upgraded to 10.04 from 8.04. My Brother laser printer HL-CDW4070 no longer prints. The printer did survive a previous upgrade. Several other users have had this problem for other printers, but the fixes look to be brand specific. I hesitate to reinstall the LPR and CUPS without first knowing whether there's an easier fix. Error message from evince on a pdf file: Print Error There was a problem processing document'R Graphics Output' Retried with another file ... and it hung. Retried from xpdf and it queued behind the one that hung.
Maybe related:
- flash plugins were in a bad state. I followed advice from another post and got it fixed.
- synaptic shows hl4070cdwcups and hl4070cdwlpr both installed with the latest version which is 1.0.0-7 .... but they're listed as size 0 B (properties says size is N/A)
- I reinstalled cups-pdf which was missing/broken and restarted the computer but still no luck
- power cycled the printer, tried again.
View 1 Replies
ADVERTISEMENT
Jul 12, 2010
Have a Brother MFC-9440CN the Scan function of which operated perfectly in Fedora 11. Have upgraded to Fedora 13, now when the Scanner Tool is activated (XSane .997) an error message is returned "Error during CMS conversion. Could Not open scanner ICM profile: (null)". Has anyone had and solved this problem, I have tried everything identified on the Brother web site. The scanner works perfectly when accessed through the Simple Scan application.
View 1 Replies
View Related
Jan 3, 2010
I am currently running 9.04 on an HP Mini 1033CL.When I first upgraded to 9.04, my sound card would not work. Finally, about 3 months ago, an update changed that. Now, I see that 9.10 is available, but I am nervous about installing it. Are there any foreseeable problems I need to know about? Keep in mind, I know little about Ubuntu and use it on my netbook (my fun computer) because it is free and I hate windows. Therefore, if there are buggy problems I have to adjust in bios or by tagging something, or whatever, I have no idea how to do it. 9.04 seems fine, so why upgrade?
View 4 Replies
View Related
May 13, 2010
My Mythweb is asking for authentication but none username/password will work. It just prompts for authentication over and over again. I've found few configurations regarding authentication:
in /etc/apache2/httpd.conf I have following lines:
<Directory "/var/www/mythweb">
Options Indexes FollowSymLinks
AuthType Basic
AuthName "MythTV"
AuthUserFile /etc/apache2/httpd-passwords
require user user1 user2
[Code]...
none of the username/paswd pairs in Authuserfile are working? Can there be yet another file / configuraton somewhere? How do I know which one apache is using right now?
View 1 Replies
View Related
Aug 18, 2010
I have read the threads and have downloaded the 4 drivers/files from the brothers site and installed them.. but still can not get my USB cabled printer to work what am I missing I am running Ubuntu 10.04 sounds like brother is not the printer to have in case their is no fix what brands of printers are best for compatibility?
View 1 Replies
View Related
Sep 27, 2010
I have a DCP 7030 multifunction printer. I have installed all proprietary drivers from Brother (printer an scanner drivers). [1] Printing works but unfortunately both Simple-scan and X-Sane do not recognize the scanner. Brother provides some scanner settings [2] - but unfortunately not for Fedora 13. I have tried the settings for Fedora 12 but they do not work. [URL]
View 1 Replies
View Related
Jun 6, 2011
After a fresh installation of F15, my Brother HL-2030 printer does not work anymore (means it worked fine with previous Fedora versions). As usual, I downloaded the proprietary drivers from the Brother home-page [1] and installed them. Then, I configured the driver in my browser ('localhost:631'). The printer was correctly recognised (connection via USB). Printing the test page worked fine, but now, as usual user and as root, too, I am not able to print for example with Abiword, Gedit, Sylpheed and other applications.
Strangely, using Firefox, I am able to print for example the Fedora forum or Distrowatch homepage, or some on-line newspaper articles, but I am not able to print a local HTML page (for example [2]). Furthermore, when trying to print a document in Abiword or Sylpheed, the printer warms up, but it does not print. I've attached '/var/log/cups/error_log' (LogLevel debug). (The 'HL2030' diver was added automatically, and I removed it because it did not find any PPD file. The correct printer is called 'brother_hl-2030'.)
View 5 Replies
View Related
Feb 9, 2011
I would like to know if anybody using Squeeze has gotten the DCP-8065 driver from the Brother website to work. I am running x64 and have followed the directions precisely (ia32-libs, etc.) but still no dice. I have been using the ubuntu version (brother-cups-wrapper-laser & its dependencies) and that works fine. I just want to know if anybody has gotten this to work and what they did that may have been different from the directions given.
View 2 Replies
View Related
Oct 8, 2015
I am trying to get the QL1060N to print and cut under Jessie.
I used the Ql1060N on wheezy (cups 1.5.3) with the standard Brother driver and the ptouch/foomatic driver of the QL550. They both worked out of the box.
Configuration for Brother QL1060N Driver:
Description:ql1060n
Location:
Driver:Brother QL-1060N CUPS v1.1 (grayscale, 2-sided printing)
Connection:socket://XXX:9100
[Code] ....
On Jessie (cups 1.7.5):
I first tried the standard Brother driver from here: [URL] ....It didn't work at all. When I print, Cups tells me that the job has been completed, even though nothing has been done. Sometimes I also got the error "job canceled, filter failed", but I can't reproduce this error...
The foomatic/ptouch driver for the QL550 prints like it did before, but doesn't cut the lables automatically like it used to in wheezy. (I'm using the same printing file/picture as in wheezy and also the same configuration.)
View 1 Replies
View Related
Dec 10, 2010
Only place where i need midi is mainly when using Tuxguitar. I tried tuxguitars settings, but it shows only tuxguitar sequencer and midi-through port 0. Haven't done this before so i really don't know where to start from..?
View 2 Replies
View Related
Jun 18, 2010
I have recently upgraded to 10.04 and try as i will I cannot get Skype to work. Sound is very patchy and hence unintelligable. Worked fine in 8.04 usung alsa.
View 1 Replies
View Related
Jun 23, 2010
I've been using an old modem from 2007, which my ISP calls Type I. It didn't have wireless connectivity and I used pppoeconf to setup my connection - username and password and set it to connect at boot time and everything was fine till today. I bought a Type II modem from my ISP and had to return the type I modem to them. Since the technician had no knowledge of Ubuntu (or Linux in general), he configured the modem in Windows 7, tested that the connection was working, tested the wireless connection in my netbook running XP and then he left.
Now I can't connect through pppoeconf in Ubuntu (running 9.10). The terminal says eth0 is listed but the 'access concentrator' or something like that isn't responding (no other process was running at that time). I feel very vulnerable while browsing in Windows so I want to get back to Ubuntu ASAP. Oh, and here's the output when I run "dhclient eth0"
Code:
Listening on LPF/eth0/00:16:76:33:d2:70
Sending on LPF/eth0/00:16:76:33:d2:70
Sending on Socket/fallback
DHCPDISCOER on eth0 to 255.255.255.255 port 67 interval 7
DHCPOFFER of 192.168.1.5 from 192.168.1.1
[Code]....
View 9 Replies
View Related
May 24, 2010
Previously (on Lenny) I would boot my computer and it would happily boot through to the Gnome login page (the pretty graphical one). Now (on Squeeze) I get the plain old text login prompt. So I login normally and try running "startx". It comes up with a black screen and a mouse pointer. Nothing else. Ctrl+shift commands seem to work so I am able to get to another terminal. When I switch back to the first terminal there are just come Gnome startup messages.
I really need to have this working in order to do some "work". give me a sure fire way of either fixing this, even if it means instructions on re-installing Gnome? Normally I could copy log files from my Linux machine to my email computer but with no desktop I find this too difficult and really don't have the time to spend working out how to do it. (I have "work" to do as well). So, just briefly I will summarise the Xorg.0.log file:
[Code]....
View 6 Replies
View Related
Apr 19, 2011
Recently I upgraded my Fedora 13 to its latest (stable) version Fedora 14 Laughlin. Things seemed to have gone well until I noticed that my evolution mail client stopped working. When I clicked to open Evolution, it loaded but immediately it got hanged, and every time I did I didn't work. I posted this question in fedora forum it self many views and no response. Can anyone in this form guide me as to why this is happening and how to rectify it?
View 2 Replies
View Related
Apr 20, 2010
I upgraded from Karmic to Lucid RC a couple of days ago and have been trying to work through a few problems since. One of these problems is printing with my Brother DCP506CN printer which was working in Karmic. However, I just can't seem to get it going in Lucid. I have followed the Brother linux install procedure, which worked for the the last few Ubuntu releases, but not for this one it seems.
View 3 Replies
View Related
Apr 14, 2010
That the Linux bridge configuration does not work afer I upgraded the kernel to 2.6.33.2. Why I can't find the device vmbr0?
[Code]...
View 10 Replies
View Related
Feb 18, 2010
I do not know much about Ubintu...My bro put it on my computer. I'm trying to connect a new Brother MFC-7340 to the computer but cannot get the drivers to install, as I do not understand how to even check the version of Ubuntu that I have.
View 1 Replies
View Related
Jul 16, 2010
I have just installed Ubuntu 10.04 LTS on my AMD 64 bit desktop. I have a usb connection for my Brother MFC 8860DN printer. I used the synaptic package manager to install the printer drivers ubuntu already had in their repository for my printer model. When I connect my printer to the computer Ubuntu recognizes the model, but cannot detect the printer drivers I have already installed. The printer drivers were installed to /usr where a Brother folder was created. the Cupswrapper and lpd files are in the Brother folder. How can I get the system to detect its own files so I can get the printer to work?
View 9 Replies
View Related
Aug 7, 2010
I recently re-installed lucid on a computer which had a working ethernet printer queue, to a Brother MFC-5490cn. I installed the drivers from the ubuntu package archive and set up two printer queues, one for "dnssd://<ip-address>" and the other "lpd://<ip-address>/BINARY_P1". The first appears to recognize that the printer color ink is low, so perhaps there is some communication, but nothing ever comes out of the printer. The second queue appears to fail completely.
I vaguely recall that for my previous installation I used the package supplied by Brother, but that it was very difficult, since the package no longer matched the Ubuntu file layout and locations.
View 4 Replies
View Related
Nov 7, 2010
I just used a Brothers script to install driver for my new printer MFC-9840cdw and now Synaptic will not open at all, giving following error message:QUOTEE: The package mfc9840cdwlpr needs to be reinstalled, but I can't find an archive for it.E: Internal error opening cache (1). Please report.END QUOTEWhat can I do to get Synaptic to work again, because I read it is the best way to install these drivers. I would like to uninstall the printer and start over using Synaptic.
View 4 Replies
View Related
Mar 24, 2011
I've installed drivers for Brother HL-1030 printer (LPT port), according to instructions provided in this site,...
[URL]
Although the printer is ok (because it works in other OS like windows) when i try to print a document, the printer gets alive, shows that is receiving data with "data" led and i even see a progress bar showing how the data is being sent but, in the end, data led turns off and the printer does not even load the paper. This are the commands i've used for installing the driver:
ln -s /etc/init.d/cups /etc/init.d/lpd
mkdir /var/spool/lpd
mkdir /var/spool/lpd/HL1030
dpkg -i --force-all hl1030lpr-1.1.2-1.i386.deb
[code]....
View 2 Replies
View Related
Oct 21, 2010
I upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies
View Related
Nov 12, 2010
The software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
View 9 Replies
View Related
Apr 29, 2010
I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
View 3 Replies
View Related
May 11, 2010
I have a 10.04 installation upgraded from 9.10 somewhere around the first beta.However, since a couple weeks I have the problem that I cannot use nano anymore.
Code:
mypc:~$ nano
Segmentation fault
I've tried to do apt-get remove nano then installed but stil the same,Even tried apt-get purge but with no avail.
View 2 Replies
View Related
May 27, 2010
I upgraded 9.10 to 10.04 and now it won't boot. The way 9.10 used to boot was after turning on the computer it would go through the bios screen and then a screen would come up and list both operating systems, Windows Xp and Ubuntu. XP would be highlighted and would normally boot if I did not change the highlighted area. If I changed the highlighted area to Ubuntu it would boot into Ubuntu 9.10. Now after doing the upgrade, it gets to the same screen with the two operating systems listed.
When I change the highlighted to Ubuntu an error message is briefly displayed and then it goes back to the screen that lists both operating systems. I think the error message says something like couldn't find Ubuntu, or something similiar to that. Windows XP runs fine when I highlight Windows XP in that first screen, but I want to be able to run Ubuntu. I have Ubuntu on a secondary drive, but shouldn't it have rewritten the upgraded files on that same drive that had 9.10 on it?
View 9 Replies
View Related
May 30, 2010
I upgraded the Ubuntu 10.04, and afterwards I can't print. Cups won't detect printers, hp-setup won't, hp-probe won't. Tried rebooting, reinstalling HPLIP, & CUPS. Installed latest version of HPLIP. did a purge of HPLIP and CUPS, and reinstalled, rebooted.
View 4 Replies
View Related
Jun 20, 2010
I had upgraded to 10.04 but can not use kernel 2.6.32-22.32+, I had to go back to kernel 2.6.31-21. because of the default video driver had change from the one kernel to the other, and I do not know how the correct it. In 2.6.32-22 the font would change and to a smaller size and I can barely view anything because it looks like some two year old puke a box of crayons all over the screen.
Second issue is it does not matter what power-saving mode I am in, in 5 minutes time it with go into suspension. Or right after coming out of hibernate, it will go into suspension indefinitely and no coming out of it and must to a hard boot.
View 6 Replies
View Related
Jun 24, 2010
i just upgraded from 9.10 to 10.04 and now i cant get win xp to boot. win xp will show up on the grub list but when i select it all i get is a blank screen with a cursor flashing in the top left corner. i dunno whats happend, i have never had many problems with dual boot.
View 6 Replies
View Related
Oct 17, 2010
Upgraded to MM and it boots, desktop and apps run but cannot access synaptic - gives brief error message. In terminal, ran "sudo apt-get update" and got this message:
Reading package lists... Error!
E: Problem parsing dependency Depends
E: Error occurred while processing gsfonts (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.
View 1 Replies
View Related
