I am trying to install Ubuntu on one partition on my hard drive. There is 100GB free. I've tried formatting with ext3 with a 2000mb swap file but it still does not work. I think I am not selecting a "mount point" - how do I do this?
View 3 RepliesI have a Pc with 2 hard drive, yesterday I installed ubuntu lucid but I forgot to set a mount point (let's say /datas) during partitioning, and now I have the hard drive icon on my Desktop. I would like to set the mount point during boot, what I can I do? Insert a fstab line? If I do that, the desktop icon si still there, so, what does ubuntu do when I configure a mount point on a secon har drive during installation?!
View 3 Replies View RelatedI've not got enough space on one partition so would like to install on to an empty partition, how do I do this? When I'm at the The allocate space screen do I select the partition I want to use then select mount point as / then ext 4?
View 1 Replies View Relatedi am trying to install new packages on ubuntu 10.04. the new packages are all on DVD's. I have loaded the DVD's as software repositories
Code:
# deb cdrom:[Ubuntu 10.04 LTS _Lucid Lynx_ - Release i386 (20100429)]/ lucid main restricted
# See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to
[code]....
i do so, then i get an error message from ubuntu saying that it failed to fetch several packages from the disc listed above.
when i check the mount point of the /cdrom/ it has now been changed to media/apt/ so i'm guessing synaptic is looking for media/cdrom/ but cannot find it. how do i get it to stop changing the name of the mount point and why is it doing this? could it have something to do with my modem? as i have noticed that for the first time since i have been using ubuntu (since ver 7.10, 8.04, 9.04) ubuntu 10.04 is listing my modem huawei e220 (usb hsdpa modem) as a disc drive.
I'm installing Ubuntu 11.04 beta and partitioning into 3 parts. One for root, one for home, and one for swap.In the partitioning utility you can go into during installation (at the beginning of installation actually) there is a drop down box for selecting the mount point of the partition. I'm good on the first two but am not sure what to select for swap. I'm searching on the Internet too but am not seeing what I need right off.
View 5 Replies View Relatedsir,i am a begginer so facing problem with installationa(ubuntu)with respect to mount point used and their size allocation.my system config. is 500gb hardisk,4gb ram with windows 7.
View 5 Replies View RelatedI am installing 11.04 on a test PC. My standard drive layout, developed over many years and many distros is as follows:
sda1 /
sda2 /home
sda3 swap
sda4 /data
/ and /home are relatively small. I put most data files on /data to facilitate hot backup of important data to another drive or machine.
/ and /home are periodically cold backed up with g4l. That said...I noticed that the install partitioner in 11.04 only allows me to select from a list of mount points. / home var etc. I can not type in a mount point of my liking as I have done since I started using Ubuntu about 6.4.Is this Canonical's idea of an improvement?Yes I can manually format the /data partition after install and add it to /etc/fstab. Still I would give Canonical three thumbs down on this enhancement.
p.s. The above seems to be a moot point as the installer refuses to install the boot loader. I have filed a bug report. It makes no difference if I partition the disk manually or allow the installer to partition it to its defaults. If it ain't broke, break it.
I attach a picture of my future disk partitioning,as I thought it should be. As you can see, the first two partitions are 2 different windows installations. At the end of the disk, I have specified a partition as ext3 104855 MB (sda9) and swap 8192 MB (sda. What should the the mount point of sda9 be? Should I specify a partition for /, /boot, /home, /tmp, ...etc? Or it is ok to make mount point '/'?
View 5 Replies View Relatedi am installing onto a serperate partition so that one is windows and the other is linux. im in the meddle of creating it right now but im stuck on the mount point. were should the mount point be? also should file system type be ext4? and under additional size options should it be fixed size, fill all space up to______, or fill to maximum allowable size?
View 1 Replies View RelatedHow do I configure my Debian installation to mount external USB drives to mount points based on the volume names of the drives? For instance, if I have a thumb drive with the volume name of "SWORDFISH," how do I have Linux mount it at /media/SWORDFISH? I'm aware that this can be setup in FSTAB, but that requires that I know the UUID of the device beforehand and that I take the time to set each external device up in FSTAB first. That does nothing for me when I have a thumb drive that has never been plugged into my computer before.
This seems to be setup by default in Ubuntu/Kubuntu, but is not working for me with a fresh installation of Debian Squeeze and KDE4. I've spent the past 2 hours Googling for a solution and have turned up nothing. UPDATE: My results are inconsistent. Sometimes Debian mounts devices to mount points based on the volume names, and other times it gives them generic mount points (e.g. /media/usb1).
On SUSE 11.2 when a CD or DVD is automounted (in the /media directory) it appears that the mount point chosen for the disk always has extra blanks at the end of the mount.
For example, if the label on the CD was DISK-001, the mount point chosen by SUSE is
/media/DISK-001 /
In 11.1 (and earlier) the mount point would have been
/media/DISK-001/
I'm assuming that the trailing blanks are filling in unused or blank chars at the end of the CD label.
Is there any way to change this annoying behavior? I much prefer NOT to have trailing blanks in the mount point.
I have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies View RelatedLast night I let the automatic updating of packages ran on my Fedora 10 installation. It has been a few months since I ran the updating and so it took quite long. I did not monitor it closely so I am not sure which packages were updated. After the update was completed, when I restarted my computer it halted during the boot up process at the point when it was trying to mount the root file system. The error message is "mount: missing mount point".
I booted the computer using the F10 DVD and used the rescue mode to look into the /boot directory. The kernel that was booting by default was 2.6.27.25-170.2.72.fc10.x86_64.There were two older F10 kernels in /boot and so I tried booting with them. The boot process went further but I was still not able to boot up F10 successfully. There were many error messages about not being able to touch files in /var/lock/subsys as it is a read-only file system.
I recently installed Squeeze and it was simple and is running great. I have a usb fat32 drive that shares data on 3 partitions with winxp. None are listed in fstab. They all are mounted in /media.2 partitions, Video and Music, are shown in gparted as mounted by their volume labels, which is what I want; eg /media/MUSIC. The DATA volume is mounted by its' uuid. This is how it is displayed on my desktop. The other 2 volumes display the way I want: MUSIC and VIDEO. I have changed the mount point in /media to the label name:/media/DATA but it returns to its' uuid after reboot. How can I change it to display the label name? It works fine, but I have a need to "tidy up" my desktop.
View 5 Replies View RelatedI am dual-bootng Ubuntu 9.10 and Mint 8, both of which use GRUB2. The Mint 8 GRUB sets the initial menu since Mint was loaded after Ubuuntu 9.10. Since both use GRUB2 I was not concerned about this.
Both before the installation of Mint and afterward I see a series of messages fly by on the screen when Ubuntu is booted. These come right after the initial presentation of the Ubuntu logo.
By restarting several times I can read the first several lines. They are:
Mount: Mount Point 0 does not exist
Mount 0 terminated with status 32
Mountall: Filesystem could not be mounted
Further lines follow but I would have to reboot umpteen times to have any chance of copying those.
I have looked in the various Ubuntu GRUB2 files for "Mount Point 0". I do not see any reference to it.
GParted, BKID and etc/fstab all agree on the UUIDs set for my Ubuntu/, Ubuntu Home and Ubuntu swap file.
I see nothing like this when I boot Mint 8.
My questions:
What is the point to error messages (I assume that is what they are) that fly by too quickly to be read? Are they saved to a logfile somewhere?
What is "Mount Point 0"?
What does it mean in this context to say "Filesystem could not be mounted"?
This is all very curious because Ubuntu proceeds to mount and run just fine.
What is Ubuntu trying to do as it starts up that it cannot do?
How do I repair whatever has to be repaired in order to turn off these messages?
I have looked through such GRUB2 dcumentation as I can find without seeing any reference to this.
I have a folder shared over NFS that contains three sub folders:
(Machine A)
/usr/nfsshare/a
/usr/nfsshare/b
/usr/nfsshare/c
I can see these three folders just fine on machine B via nfs.
sudo mount machineA:/usr/nfsshare /mnt/ShareMountOnB
Now I want to mount a second drive in machine A, and mount it as a fourth shared folder:
mkdir /usr/nfsshare/d
sudo mount /dev/sdb1 /usr/nfsshare/d
I can see and access all four folders on machine A just fine. I can see all four folders on machine B in /mnt/ShareMountOnB, but when I descend into folder d, it is empty! Bizarrely I can create files in this empty folder d on machine B, but I have no idea where they are being held. They are certainly not in machine A. What I have to do to access the real contents of folder d. I have already changed all permissions and owners to be identical to the other folders.Sharing it over samba to a Windows PC works fine.
I just installed 11.04 beta yesterday and was following along with this article so I could setup a "Storage" partition and always have access to the same files in win 7 or ubuntu. [URL]
The problem happens when you try to install and use ntfs-config and run it. Here is the description from the article:
Quote:
Originally Posted by lifhacker article
Finally! Head to the Applications menu and pick the Ubuntu Software Center. In there, search for "ntfs-config," and double-click on the NTFS Configuration Tool that's the first result. Install it, then close the Software Center. If you've got the "Storage" or Windows 7 partitions mounted, head to any location in Places and then click the eject icon next to those drives in the left-hand sidebar. Now head to the System->Administration menu and pick the NTFS Configuration Tool.
You'll see a few partitions listed, likely as /dev/sda1, /dev/sda2, and the like. If you only want your storage drive, it should be listed as /dev/sda3 or something similar--just not the first or second options. Check the box for "Add," click in the "Mount point" column to give it a name (Storage, perhaps?), and hit "Apply." Check both boxes on the next window to allow read/write access, and hit OK, and you're done. Now the drive with all your stuff is accessible to Windows and Linux at all times.
When I try to run the ntfs-config, I get the following.
However, in the software center there is a note below the ntfs-config download saying:
Quote:
Originally Posted by Software Center
It just so happens that this program is a newer and improved version, but very few people know about it. It's better to install the disk-manager.
I've just formatted a new USB drive to ext4. After creating a mountpoint (/media/Vids) and mounting it I changed permissions so my user owned the filesystem. I added the filesystem to /etc/fstab.
However, when unmounting the drive the mountpoint directory disappeared and I have to manually recreate the mountpoint everytime I want to remount the drive. What's going on?
Been trying to find out the mount point for an external usb hub. I can find information with lsusb :
Bus 001 Device 002: ID 05e3:0608
and dmesg:
[0.924293] hub 1-0:1.0: 4 ports detected
But can't seem to find where the hub is mounted. I've tried / dev and /etc/fstab and mtab and /media. BTW what does [0.924293] signify?
Where are the mount points for smb shares connected via "Places -> Connect to Server"? I assumed them in one of the usual places like
/mnt
or
/media
but these folders are both empty. There are a couple of applications which are not capable of accessing my shares because i can't navigate to the right location...
I just removed ubuntu and installed kubuntu, just for something different. i had my home and / folders partitioned separately for ease of upgrade, now during the update process i forgot to make sure the home directory would mount the right partition. for fear of loosing data, so my question is, is there any way of changing the mount point of the drive one the OS is installed.
View 9 Replies View RelatedI have a bad mount point, I had some mounting problems before, and made this wrong entry, when I mount the volume it works but then the system tells me the hard drive is empty, which is wrong and some kind of error.
My problem here is pretty simple, this point is in /media, but it disappears when the volume is unmounted. I want to delete it and re-mount using the storage device manager, which hopefully will solve the problem.
So how can I delete this entry when it disappears? I don't really want to delete it while the volume is attached and mounted.
when i test errors by "sudo mount -a" i got this
mount: mount point swap does not exist
after writing this command "sudo gedit /etc/fstab" ,,,, i got this
UUID=5148630128FE30C4 /media/Collection401 ntfs-3g defaults 0 0
UUID=FE4C11644C1118CB /media/Collection402 ntfs-3g defaults 0 0
UUID=6e73cf26-edcd-42b0-884c-e2686dd70d15 / ext3 defaults 0 1
UUID= swap swap sw 0 0
UUID=7DF3923D63A29C0E /media/Eng ntfs-3g defaults 0 0
UUID=492905577CF6BDDF /media/Software ntfs-3g defaults 0 0
/dev/sr0 swap udf,iso9660 defaults 0 0
I am trying to add my natty Live Cd as a repository, by issuing apt-cdrom add, but even autodetecting the mount point fails.
Code:
apt-cdrom --auto-detect add
How do I determine the mount point for the cdrom in order to tell apt-cdrom where to look?
Output:
Code:
Using CD-ROM mount point /media/apt/
Identifying..
E: Unable to stat the mount point /media/Ubuntu-4011.04-40amd64/ - stat (2: No such file or directory)
E: Unable to stat the mount point /media/apt/ - stat (2: No such file or directory)
W: Failed to mount '/dev/sr0' to '/media/apt/'
E: Unable to change to /media/apt/ - chdir (2: No such file or directory)
E: Unable to stat the mount point /media/Ubuntu-4011.04-40amd64/ - stat (2: No such file or directory)
I'm developing a little script that automatically detects the insertion of a usb device and tries to open the directory of this device in nautilus. I am using Python
So far I was able to sample and compare the changes that occur in the output of 'lsusb' command and get information pertaining to the addition and removal of usb devices.
Now I want to know if we can use that information (or some other info present in the usb sybsyste --/sys/bus/usb folder) to determine exactly where this device has been mounted.
I know you might recommend using 'mount' as a quick way to do the same. I have already done that, but the limitation is that mount only gives u the mountpoint information. How does one (using a program/logic) determine which mount point corresponds to which device.
If I were to plug in two devices together, and both were automatically mounted, how will I be able to tell which mountpoint corresponded to which device? the output of lsusb provides no information whatsoever about where the device is mounted. So its kind of a deadlock
from lsusb ive been able to gather : Device name, serial and bus number and device number
Another thing i've noticed is the 'autoplay'. Whenever I insert a my music player into my computer, it gets mounted automatically and I'm presented with options about simply opening the file or playing it with rhythmbox... now if all that was being done was polling the output of mount, they would not be able to know that the device inserted was a music player (that info u can get from the /sys/bus/usb folder only using the device class and subclass info). So obviously the two are linked somewhere...
I have just updated to karmic, and I found that my external hard disk partitions, previously mounted under /media/disk and /media/fat are now referenced by something looking like a UUID, namely /media/7b096ea4-60ee-46b1-95cd-1851b051c40d and /media/4951-95D9.
Is there a way to revert to the old settings? Any application relying on the files on the external hard disk has now stopped working. While I certainly could just change reference (assuming the UUID does not change every session), I'd rather use the old names if possible.
We have 4 HDs on our server. One of them broke last night. I could see a message on the server and after restarting the S.M.A.R.T. on the BIOS was recognizing one HD as bad. After removing the failing HD, the server is now up and running. I do not remember how I configured the HDs. During the installation I had a few problems and I change a few times what I wanted to do. I am sure I had at least a RAID0 with 2 disks but I could have put all the 4 disk in the RAID having 2 disks as spare drives or I may have created another volume for the other 2....
dmraid return: No raid disks
Code:
$ sudo dmraid -ay -vvv -d
WARN: locking /var/lock/dmraid/.lock
NOTICE: /dev/sdc: asr discovering
NOTICE: /dev/sdc: ddf1 discovering
NOTICE: /dev/sdc: hpt37x discovering
NOTICE: /dev/sdc: hpt45x discovering
NOTICE: /dev/sdc: isw discovering
DEBUG: not isw at 500107860992
DEBUG: isw trying hard coded -2115 offset.
DEBUG: not isw at 500106779136 .....
no raid disks
WARN: unlocking /var/lock/dmraid/.lock
MountManager seems to report that sda and sdb belong to linux_raid_member.
However there is no mount point.
Questions:
1-How do I find how the disk were and are configured?
2-How can I find what was on the disk that died? (Was it a spare drive or one of the 2 in mirror)?
3-What do I need to do now to be sure that the mirroring is working OK? (considering that there is a spare drive). Do I need to use a command to let ubuntu mirror the drive on the new one?
4-What do I need to do when I get a replacement of the broken disk?
5-What is an utility that can show me easily how the disks are configured and eventually makes a change.
I have made a clean install number of times. At the point where you (I always do this) manually select the partition where you want Ubuntu to be installed there is a option where you want the Mount Point. The options are / /boot /home /tmp /usr etc. up to now I have always used / but I'm not sure effect choosing some of the options would be.
View 1 Replies View Relatedi just installed the new vision of Ubuntu 11.04 , i created 3 partitions 1 for swap, the other one for / and the last one for /home, but by mistake instead of selecting /home i chose /boot, and i want to change it now, i already tried changing my FSTAB and i ended up with a corrupted Desktop when i restarted. i had to change my FSTAB using VI command here you have a copy of my fstab:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
[code]....
i tied to plug my ipod in just now and it says connected on the ipod but is not mounting on my ubuntu desktop or with gtkpod. i also have a g1 plugged in via usb with an 8gb mem card mounted on the phone but that wont mount on the computer either. Oddly my usb flash drive will mount. i forgot where i seen the message but it says that my ipod is blocked from being mounted. I ran mount on the commandline and it said nothing about an ipod or android phone at all. i can see the devices in /dev/disk/by-label/. And it shows iPod my g1 and my live cd. btw i am running a live cd because of my faulty hard drive
View 3 Replies View Related