I have a dell 1735 with vista with viruses do you know of a disc or software I could use to deletem/s vista so the laptop can be clean before installing ubuntu
View 2 RepliesI've never tried installing any other operating system on my desktop so I'm not sure if it's a 9.10 bug (probably not), but whenever I choose any of the options after the ubuntu cd has been loaded at startup it goes to a black screen with the underscore at the top, and promptly reboots. At this point in time I can just boot back into windows or get to the same selection screen off of the cd.I've tried burning 3 seperate cd's and at the moment and trying to boot them on my laptop (but not working... hrm). I'm thinking about redownloading the iso in a couple minutes.
View 2 Replies View RelatedI am on Ubuntu 9.04. I have a Vista disc which I have slipstreamed some drivers onto. (Basically, you copy them into the "upgrades" or "updates" folder)
I have copied all the files from the Vista disc onto my local Ubuntu drive. I have copied in the new files.
Then, I used Brasero to burn from the local Ubuntu drive to a blank DVD.
So, I checked, and all the files are there.
But when I start up the computer, it does not boot. It boots straight into GRUB, then Ubuntu. Wheras, when I stick in the original Vista disc, it does boot.
How do I get the new disc to boot? It has, surely, exactly the same files as the original....
I am trying to recover my compaq vista after a BSOD error. I have Ubuntu running and can see both my main hard drive and the factory image. I am trying to create a recovery disc that will allow me to boot back into windows.
View 1 Replies View Relatedwant to delete and ISO I've burned on to a disc. is there any software out there that will allow me to do this?
View 5 Replies View Relatedi just got ubantu and want to delete vista btw ubantu only has 3.57gb how do i increase that to the full harddrive? also g parted doesnt allow me to delete vista???
View 10 Replies View RelatedIm using linux mint Julia and i wanted to know how to delete viruses using this..I have further knowledge about this specifically using clamAV but no idea how to use it
View 3 Replies View RelatedI was dual-booting Vista Business and Fedora 12 on the same hard drive. I deleted the Fedora partition and expanded the Vista partition to use this space.
I figured that because GRUB was on the Fedora partition (at least, I thought it was), I'd just be able to load up Vista as usual.
When I turn the computer on, a GRUB command-line comes up, and to be completely honest, I have absolutely no idea what to do at this point. I'd quite like to just get rid of GRUB entirely and boot straight into Vista, but again, I don't know how.
I've tried using a Vista recovery disc to sort out startup problems, but it doesn't do anything because the problem occurs before control is passed over to Vista.
What can I do to fix this problem? Can I get delete GRUB and boot straight into Vista? How?
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies View RelatedI installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
View 6 Replies View RelatedI have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View Relatedi have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
View 7 Replies View Relatedthis blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies View RelatedI have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
I'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies View RelatedThe cd starts up fine screen shows ubuntu logo and five dots then after it goes blank and screen goes to sleep. Also after install within windows i startup into ubuntu it then asks me which to boot into; windows 7, ubuntu, or ubuntu (debug mode or sumthing like the).
View 1 Replies View RelatedI'm a complete novice who installed ubuntu 10.10 this morning, which seemed like it worked great until I noticed that I had to connect to the wireless network manually each time I re-started etc. I did some research into this and found that if you disable the network manager via the terminal section by replacing certain lines with 'deny' instead of accept or something. I did this however the nm was unable to connect anymore! I've been tearing my hair out searching the net, and this forum for a solution but to no avail. Ive since removed network manager while trying one (of many) ways I found online, so need to install it once more. I even tried to install the whole os again from the disc that I did so with initially, but it doesn't work either!Ill be more than happy to connect every time I turn on if it means I can access the net once more!
View 1 Replies View RelatedIs it possible/easy to create my own install disc based on the install that I have now? I just got finished setting up ubuntu on a new computer and I want to make an install disc that has everything that I have set up ALREADY set up right after installation.
View 2 Replies View RelatedI've had some problems with my ubuntu lately (>.<) and would like to use my Windows 7 disc to install windows side by side with ubuntu (for compatibility reasons). The problem is, my computer won't boot the disc on startup, won't read it at all, and thus I can't install it. How can I make Ubuntu read the Windows 7 disc? All other discs work fine.
Its not just my disc- I've used this disc on other computers no problem, and my Ubuntu reads other discs without any problems.
I've tried to boot my Ubuntu 10.04 from my disc drive, and installing it in Windows like an app, but every time I do my screen looks like it went bad. The top two inches are the way it should be but the rest is white, and I can't see anything. Is there some setting on my comp I need to adjust or did I just get a bad disc? The disc doesn't have a scratch on it and I've cleaned twice now.
View 6 Replies View RelatedHardware: Laptop 6735b from HP
Source of problem: ATI graphic driver not installed
Problem:
1. Freeze Operating system when power unplug (in Gnome)
2. Can not start any Operating system with full or just part of KDE (Kubuntu, Linux mint). Thus i have to stuck with pure Gnome like Ubuntu. ==> install Ubuntu ==> install ATI graphic driver ==> install KDE ==> swap to Kubuntu in Ubuntu.
I tried a lot of OS and none will work. I think the only way for me is create a install version of Kubuntu with ATI driver already build in so at least i can start my OS.
Thus could somebody feel free guide me in step by step to build a install disc for Kubuntu. All i need is add up in setup process ATI driver install.
Here is the link for ATI driver from ATI
Quote: [URL]
I have downloaded imgburn, then downloaded ubundo from hippo site. somehow sonic was also downloaded. I did not know what choice to make when it came time to burn a cd....now I can't get back to those choices....I am trying to make a bootable cd to install in a sonic laptop without an operating system. If by downloading ubuntu on my c/drive have I changed my os in any way...I have a hp compaq desktop computer using windows os..I am on a network with my husband
View 3 Replies View RelatedAfter happily running a persistent install from a USB stick for a week I decided to delete my Windows install and replace with Ubuntu.
I did the install from the USB stick, selecting the option to use the whole drive.
When the install finished I was prompted to restart. I removed the USB stick and did so. The machine rebooted... and nothing. Just a flashing cursor top left of a black screen.
I've booted the USB stick version and looked at the hard drive. Stuff has been installed sure enough, but it will not boot.
Machine is Acer Aspire 5920 laptop. Running Ubuntu from USB stick has been smooth as silk with no issues.
I'm not technically minded, so I'm afraid that any assistance (for which I would be eternally grateful) may need to be n00b-style dumbed-down.
At the end of install I encountered a problem dealing with the disc reading too fast. Have any of you heard of or seen this before? Afterwards it wouldn't let me close it out of the install so I just did a hard shut down of my computer. What can I do to fix this?
View 1 Replies View RelatedI'm trying to boot into the Live CD on my Ubuntu installation disc. I changed the BIOS to boot from my disc drive, and I can hear it read the disc, but then my computer just boots into the Ubuntu installed on my hard drive. How can I boot the Live CD?
View 9 Replies View RelatedI can't get Kubuntu to install. I put the disk in the drive and the Kubuntu Menu is displayed. I selected the Demo and Full Installation option. This sent me to another menu that asked if I wanted to reboot now or later. I chose now but instead of rebooting it went back to the Kubuntu menu. I then went to the start menu and selected Restart. When the computer restarted it didn't recognize the Kubuntu disc. I'm running Windows 7 in a 64-bit machine.
View 5 Replies View RelatedMy friend just installed Ubuntu from cd on a computer without Internet connection. She hoped to be able to open some video and music files there, but it turns out there were no proprietary libs in the installer. And since the majority of the files were avi, mp3 and mp4, they couldn't be read.I am an experienced Linux user, but I have mainly dealt with Gentoo, plus I'm used to be able to download and install programs directly through a package manager. However since my friend's computer isn't connected we don't have that possibility.
how can I install proprietary libs (like for the formats mentioned) to this computer? Could they be available from the installation disc, and if so how do I get them? Can I transfer packages with a memory stick? (And is there some easy way to find all dependencies?) Or any other solution?I do have a 3G mobile modem dongle which perhaps we could use. However I have bad impressions of those and Linux. Will it work without a great deal of configuring (or extra software)? Otherwise, this method would mean an extra step.
I've downloaded the ISO file but not sure if we need an 800 MB because i am trying with active ISO burner and it can not burn the disc.
Please tell me, this is the first time i am planning to use linux. I am a windows user.
I DLed 10.10 iso and burned it to cd. When I try to boot with cd, it starts up fine, I get the Ubuntu logo with rolling dots, but after a few mins it freezes (with logo still on screen). I have been running Ubuntu on this comp for years
View 9 Replies View Related