At the end of install I encountered a problem dealing with the disc reading too fast. Have any of you heard of or seen this before? Afterwards it wouldn't let me close it out of the install so I just did a hard shut down of my computer. What can I do to fix this?
View 1 RepliesI have AMD athlon 64 processor, Seagate 160GB SATA Hard Disk, ASUS A8VMX mother board.With this configuration, I can Install FC7 without any error. But all the latest releases after FC7 is not detecting my Hard disk. Is there any solution to solve this problem? Actually I'm searching for a solution when the FC8 released. Now I have all the later releases from FC8 to FC11 DVD except FC9. But none is working .
View 1 Replies View Relatedthis blew my mind today, because i've been using ubuntu for 2 and half years. Brasero 2.28.2 in Karmic does not have an option enable multisessions when burning disc or import a disc which has a multisession.
Seriously, wtf is going on? This is supposed to be Ubuntu's default CD authoring software.
I'm trying to install files and everytime I manage to install from the first disc I succeed. When I get the the second disc I just keep clicking the "OK" button instead of "Cancel" and it keeps neglecting it.
View 1 Replies View RelatedMy wireless seems to be fast for a good 30secs then bang takes good while to load the next page almost as if it's disconnecting and then reconnecting/scanning reconnecting. Why cant it stay connected. I have WAP PSK security here is my network setting please let me know if I should change any of them:(side not is there a way to fix this problem occuring so frequently it says on the wiki that it should only occur once in a whilce https:[url].....
View 2 Replies View Relatedi installed kernel 2.6.34 to fix my lid closing issue, and that went great. but now when i go to reinstall my broadcom i get this error. Code: Reading package lists... Done Building dependency tree Reading state information... Done bcmwl-kernel-source is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ... Removing old bcmwl-5.60.48.36+bdcom DKMS files...
[Code].....
I have just installed 11.3 x64. The installation went fine and worked for the first few hours. I ran the online update tool, and now it cannot find grub unless the installation disc is inserted and I select the "boot from hard disc" option.
I have read about the problem of the root partition being back, but not sure that's it.
sda1 - swap
sda2 - /
sda3 - /home
There used to be a repair tool in the installation disks. I could not find that in this media. Is that still available?
I don't understand the results of a simple performance test I ran using two basic scripts (running on a high end server):
perfVar.zsh :
#!/bin/zsh -f
MYVAR=`cat $1`
for i in {1..10}
[code]...
Performance test result:
> time ./perfVar.zsh BigTextFile > /dev/null
./perfVar.zsh FE > /dev/null 6.86s user 0.32s system 100% cpu 7.177 total
> time ./perfCat.zsh BigTextFile > /dev/null
./perfCat.zsh FE > /dev/null 0.01s user 0.10s system 91% cpu 0.118 total
I would have thought that accessing a VARIABLE was way faster than reading a FILE on the file system... Why this result ?Is there a way to optimize the perfCat.zsh script by reducing the number of accesses to the file system ?
I'm sorry for this stupid question, but I have nowhere found it.I need to access to my USB disc from text mode (In Fedora LiveCD I see it and i can access /media/New Volume). In F12 runlevel 3 in mc I see it in /dev/disc/by-label as @Newx20Volume. But I don't know what is the correct path.
View 2 Replies View RelatedUbuntu is a bit slow on this laptop, if this usually or is do i need to install a driver that helps the laptop getting fast with Ubuntu Netbook edition? I've got the Acer Aspire One AOA110, it had got a low HDD space.
View 9 Replies View RelatedBefore the other day, I'd copied a live CD to ramdisk and run it from there before, but the disk was INX (INX is not X), a live CD based on Ubuntu that runs entirely in the text mode, no GUI. INX is a terrific product: colorful, educational, light, agile, fun to use, and and often damned useful, but when an OS only uses text, you may not notice how much running from the RAM speeds up an OS. Previously, I'd assumed that the best reason to run a Live CD from the RAM was to free up the CD ROM drive. When I started running a full KDE 3.5.10 Desktop from the RAM, it didn't take me long to notice the awesome boost in speed and performance.
The computer has the fastest access to the data that's in the RAM. (The "A" in "RAM" stands for "access", right?) So the machine is faster. As the RAM gets larger, I'm sure more and more live CDs are going to offer the RAMdisk option. Right now both INX and SLAX share the characteristic of being exceptionally small CDs, and that makes them well suited for this kind of application. The "minimal" version of Slax, the basic CD without any modules added, is less than 200 mbs, which fits very nicely on my 1024MB RAM. I now use the minimal SLAX cd to initiate the system, and I keep a collection of the modules on my hard drive to copy to the RAM and activate at will.
Here's a couple of screenshots: [URL] I'm using Wine here to run my one and only favorite Windows program, a text to speech program called READ PLEASE. Note that I am also running KTorrent, which is uploading from and downloading to my external MyBook hard drive. [URL]. Here's a shot of yakuake, which is sort of like Konsole with superpowers. I just upgraded my hard drive KDE system to 4.2.3, and they still haven't fixed Yakuake yet. I know it's been reported, so I'm sure it'll be taken care of.
Installing 11.2 from KDE LiveCD on an IBM ThinkCenter with 3.2Gb CPU and 1Gb RAM. Ubuntu 9.04 on first two partitions. I go through the configuration, click to 'install': Install display bars remain blank. After 2-3 minutes, black screen with scroll of attempted installation pieces and the error message: "Respawning too fast. Disabled for 5 min." Freeze.
Other posts mention problem with init. But this is happening with the install so not able to address that. No apparent md5chksum for LiveCDs. No mention of this problem in installation help guide. Does anyone know how to deal with this? If you need more info, I will provide. Though it seems this is not an unusual problem when booting an installed system, there's no mention of it happening during installation.
The cd starts up fine screen shows ubuntu logo and five dots then after it goes blank and screen goes to sleep. Also after install within windows i startup into ubuntu it then asks me which to boot into; windows 7, ubuntu, or ubuntu (debug mode or sumthing like the).
View 1 Replies View RelatedI'm a complete novice who installed ubuntu 10.10 this morning, which seemed like it worked great until I noticed that I had to connect to the wireless network manually each time I re-started etc. I did some research into this and found that if you disable the network manager via the terminal section by replacing certain lines with 'deny' instead of accept or something. I did this however the nm was unable to connect anymore! I've been tearing my hair out searching the net, and this forum for a solution but to no avail. Ive since removed network manager while trying one (of many) ways I found online, so need to install it once more. I even tried to install the whole os again from the disc that I did so with initially, but it doesn't work either!Ill be more than happy to connect every time I turn on if it means I can access the net once more!
View 1 Replies View RelatedIs it possible/easy to create my own install disc based on the install that I have now? I just got finished setting up ubuntu on a new computer and I want to make an install disc that has everything that I have set up ALREADY set up right after installation.
View 2 Replies View RelatedI've had some problems with my ubuntu lately (>.<) and would like to use my Windows 7 disc to install windows side by side with ubuntu (for compatibility reasons). The problem is, my computer won't boot the disc on startup, won't read it at all, and thus I can't install it. How can I make Ubuntu read the Windows 7 disc? All other discs work fine.
Its not just my disc- I've used this disc on other computers no problem, and my Ubuntu reads other discs without any problems.
I've tried to boot my Ubuntu 10.04 from my disc drive, and installing it in Windows like an app, but every time I do my screen looks like it went bad. The top two inches are the way it should be but the rest is white, and I can't see anything. Is there some setting on my comp I need to adjust or did I just get a bad disc? The disc doesn't have a scratch on it and I've cleaned twice now.
View 6 Replies View RelatedHardware: Laptop 6735b from HP
Source of problem: ATI graphic driver not installed
Problem:
1. Freeze Operating system when power unplug (in Gnome)
2. Can not start any Operating system with full or just part of KDE (Kubuntu, Linux mint). Thus i have to stuck with pure Gnome like Ubuntu. ==> install Ubuntu ==> install ATI graphic driver ==> install KDE ==> swap to Kubuntu in Ubuntu.
I tried a lot of OS and none will work. I think the only way for me is create a install version of Kubuntu with ATI driver already build in so at least i can start my OS.
Thus could somebody feel free guide me in step by step to build a install disc for Kubuntu. All i need is add up in setup process ATI driver install.
Here is the link for ATI driver from ATI
Quote: [URL]
I have downloaded imgburn, then downloaded ubundo from hippo site. somehow sonic was also downloaded. I did not know what choice to make when it came time to burn a cd....now I can't get back to those choices....I am trying to make a bootable cd to install in a sonic laptop without an operating system. If by downloading ubuntu on my c/drive have I changed my os in any way...I have a hp compaq desktop computer using windows os..I am on a network with my husband
View 3 Replies View RelatedAfter happily running a persistent install from a USB stick for a week I decided to delete my Windows install and replace with Ubuntu.
I did the install from the USB stick, selecting the option to use the whole drive.
When the install finished I was prompted to restart. I removed the USB stick and did so. The machine rebooted... and nothing. Just a flashing cursor top left of a black screen.
I've booted the USB stick version and looked at the hard drive. Stuff has been installed sure enough, but it will not boot.
Machine is Acer Aspire 5920 laptop. Running Ubuntu from USB stick has been smooth as silk with no issues.
I'm not technically minded, so I'm afraid that any assistance (for which I would be eternally grateful) may need to be n00b-style dumbed-down.
I'm trying to boot into the Live CD on my Ubuntu installation disc. I changed the BIOS to boot from my disc drive, and I can hear it read the disc, but then my computer just boots into the Ubuntu installed on my hard drive. How can I boot the Live CD?
View 9 Replies View RelatedThe follwing message appears when i start my computer (loaded with ubuntu 9.10 and windows) "grub loading error reading". i am not able to proceed further. and the part that baffles me the most is that i am not able to boot from the live cd as well.
View 4 Replies View RelatedI decided to install Maverick on another PC in the house. I downloaded and burnt the 10:10 live CD three weeks ago and installed it on my laptop without problem.
Now when try to install on this it read the CD as first boot device, goes to the language selection, and then the "try without installing/Install/check disk" etc. I select either "install" or "try without installing" and after s few seconds the drive spins down and thats it...nothing more happens.
I know the CD's fine as I already installed with it and the PC in question currently has a working version of Karmic on it. PC is an Acer L100 and the CD is the 32 bit version.
Update: After posting this I've played around a bit more. It seems most attempts it doesnt want to read the Live CD at all. After trying to boot from it and displaying the copyright line "isolinux..." it jump straight GRUB and boots my present OS. I've just tried the Karmic CD too and the same thing is happening. So maybe points to a problem with the CD drive??
I created a boot disc (USB drive) with Ubuntu 11.04 and tried to install it on my Gateway GT5012 desktop running Windows XP. It gets to the part where I can "Run Ubuntu from this USB," and I select it. The screen shows "loading vm/linuz..." or something like that, and then the entire screen turns into dots.
One time, when trying to boot from the drive, it brought up
"CHS: Error 0201 reading sector 1418005 (88/68/3)
EDD: Error 4200 reading sector 1418006"
I ran this same USB drive on another computer (also running XP), and it worked just fine, so I really have no idea what's going on. If it matters, the computer it worked on had Internet access, this one didn't. It says "Loading /casper/vmlinuz..." and then goes to the screen of flashing dots.
I can't get Kubuntu to install. I put the disk in the drive and the Kubuntu Menu is displayed. I selected the Demo and Full Installation option. This sent me to another menu that asked if I wanted to reboot now or later. I chose now but instead of rebooting it went back to the Kubuntu menu. I then went to the start menu and selected Restart. When the computer restarted it didn't recognize the Kubuntu disc. I'm running Windows 7 in a 64-bit machine.
View 5 Replies View RelatedMy friend just installed Ubuntu from cd on a computer without Internet connection. She hoped to be able to open some video and music files there, but it turns out there were no proprietary libs in the installer. And since the majority of the files were avi, mp3 and mp4, they couldn't be read.I am an experienced Linux user, but I have mainly dealt with Gentoo, plus I'm used to be able to download and install programs directly through a package manager. However since my friend's computer isn't connected we don't have that possibility.
how can I install proprietary libs (like for the formats mentioned) to this computer? Could they be available from the installation disc, and if so how do I get them? Can I transfer packages with a memory stick? (And is there some easy way to find all dependencies?) Or any other solution?I do have a 3G mobile modem dongle which perhaps we could use. However I have bad impressions of those and Linux. Will it work without a great deal of configuring (or extra software)? Otherwise, this method would mean an extra step.
I've downloaded the ISO file but not sure if we need an 800 MB because i am trying with active ISO burner and it can not burn the disc.
Please tell me, this is the first time i am planning to use linux. I am a windows user.
I have a dell 1735 with vista with viruses do you know of a disc or software I could use to deletem/s vista so the laptop can be clean before installing ubuntu
View 2 Replies View RelatedI DLed 10.10 iso and burned it to cd. When I try to boot with cd, it starts up fine, I get the Ubuntu logo with rolling dots, but after a few mins it freezes (with logo still on screen). I have been running Ubuntu on this comp for years
View 9 Replies View RelatedI have an ASUS G51J notebook with Windows 7 installed. I was following This Guide. I set aside about 100GB for the Unallocated partition. When I started my laptop, I chose to boot from CD (which has an Ubuntu 10.10 ISO on it). I saw a purple background with two icons at the bottom of the screen, and eventually "Ubuntu" appeared in the center with a few dots underneath it. These dots would change color from left to right like a loading bar.
This is where my issue comes up. My friend was using this same CD on his Dell laptop and his desktop which has a XFX motherboard, Q6600 processor, and Invidia 470 graphics card. After this "loading bar" was done, he would be asked if he wanted to boot or install Ubuntu.
This didn't happen for me. What happened instead was that I saw what looked like my Windows desktop after having gone through a meat grinder. There were various icons randomly in pieces all over the place. The only icon that was in one piece (by chance) was my shortcut to Skype.
Has anyone seen this before? Am I doing something wrong? My friend was saying that maybe I should try with a fresh reinstall of Windows and try again. I wasn't even given the choice to just boot from disc. It got to the point where I expected it to give me the options to do so, but instead the Kansas version of my desktop shows up after being hit by an F5