When I choose the manual partitioning scheme (the bottom radio button),I cannot specify mountpoints manually for some of my partitions.I have tried clicking in the mountpoint box, to no avail.The only choices I have are in the dropdown menu.My current partitions include ones for /data, /storage, and /art,in addition to/and /home.
View 4 RepliesI am trying to install ubuntu 9.10 alongside windows on my laptop's harddrive. When I was going through the procedure it gave me the option of a guided partition of my harddrive... however there was an error. At this stage I unplugged my external harddrive because it's sometimess a bit dodgy and restarted the installation process. However everytime since that I have tried to install, it only gives me the option of erasing the entire disk or specifying the partitions manually
View 6 Replies View RelatedI have figured out manually setting the swap partition and setting "/" as the mount point for the primary partition during install. If during install, I want to create another partition to keep the OS separate from installed programs and such, to be able to do a clean install every 6 months and not loose everything (or anything) I have done prior.
View 2 Replies View Relatedhow to partition. I was getting sick of having to backup my data every time I had to reinstall Ubuntu, so someone recommend that I partition my hard drive so that I could store all my personal files ( documents, music, and vidoes ) onto the seperate partition. However I don't know how to do this. Furthermore when a new version of Ubuntu is release I always pick the install on the entire hard drive so the partition i installed would end up being deleted. How do you install Ubuntu by manually specifying the partitions.
View 6 Replies View RelatedI have various drives and partitions that I have been mounting through fstab, but sometimes I had to do it manually, but now, I can't get them to mount at all. At first I thought it might be a disk failure, but booting to a Live CD shows all the drives working fine. when the entries are added into fstab, $mount -l shows them as mounted to their relevant mount points, but the data does't show in either terminal or dolphin?
Typing $umount /dev/drive always returns /dev/drive not mounted.
When I comment out the entries in fstab and reboot and try a manual mount, I always get /dev/drive already mounted or /mount/point busy. $mount -l does not show any mount entry points for the drive. My /home/user partition is now full as I can't save data on the other drives, so I don't know if this is an issue. Also I use a mixture of encrypted partitions and non encrypted partitions, but this wasn't an issue before. Checking some of the logs didn't show any errors. The problem seemed to start when gdd was saving data to a partition mount point I thought was mounted but wasn't. I have since removed that data and even created a new mount point.
I edited fstab file and added my hdd partitions to it. just wondering should i manually unmount my partitions everytime i shutdown or restart.
View 4 Replies View RelatedI'm opening this thread following the topic forum organization. The original thread are onAs above described, I changed all my system root to bind user and getting back to root. But a consequence of that are vary and maybe take some time to get resolved, but the topic of the thread is:I can't see the mount points on Places for all my drives (included HDD, CD/DVD and USB's). I doesn't use mkdir + mount strategies, because, I had some estrange troubles with, about that later, when I want to use the front end the drives don't mountEx.:Graphical: Click on Places > Filesystem 1GB = mounted on /media/MYBRANDon terminal: mount /dev/hda1 /media/usbstick = mounted on /media/usbsticGraphical: Click on Places > Filesystem 1GB = mounted randomly on /media/usbstick or /media/MYBRAND or doesn't mount.
View 3 Replies View RelatedI have an Acer Aspire One D150 with the following partition table:
I would like to free up a bit of space from the Win7 partition and install OpenSuse 11.2 KDE alongside my existing OS'es. Trouble is no matter what I do YAST wants to install OpenSuse in / and /home over the top of Ubuntu. It won't let me create any new mountpoints for / and /home. Furthermore, I've heard that even if I can successfully install OpenSuse I will face problems as Ubuntu uses Grub2 and OpenSuse still uses Grub-legacy.
actually some my windows ntfs partiitions are unable to mount at start up. the error msg is -'some of your partitions are unable to mount press 's' to skip or 'm' to manually mount.
View 14 Replies View Relatedgive me the sequence for manually mounting devices in "rescue mode" ? When I try "linux rescue" from the install disk, it eventually fails to mount my partitions with a generalized failure message, which tells me nothing. I then try mounting them myself on /mnt/sysimage. I have separate root, boot, and home partititions. Is the sequence:
Mount root partition at /mnt/sysimage
chroot /mnt/sysimage
Mount boot partition at /boot
Mount home partition at /home
What about tmpfs, devpts, sysfs ? Do they need to be manually mounted also ? The 'mount' command does not show them as mounted after I do my chroot.
I used Ubuntu before, without problems but since the 10.04 version it won't recognize my partitions. I formated my laptop and partitioned it, installed Windows 7 64bit, which I need for my work, and wanted now to install Ubuntu 10.04/10. I then used GParted to check my Harddisk and it is having troubles to recognize my partitions, too while Windows finds them. GParted is giving me an error message saying my partitions are oversized. I am still in the beginning of my Linux experiences and so I don't know what to do. I have two 250GB harddisks (how Windows recognizes them),
[Code]....
Xubuntu 9.04 installation CD not detecting any of the current partitions. This all started when I reinstalled windows XP a few days ago.After, the computer wouldn't boot into GRUB and would boot directly into windows.Other threads have dealt with a similar issue, that of overlapping partitions causing libparted/parted/gparted to detect the whole drive as unallocated space. The problem in these threads seemed to be a corrupted partition table, in which the partitions overlapped with each other. So of course I checked the output of fdisk -l for overlapping partitions, but I don't see any obvious overlapping partitions. I've noticed that the partition that used to be linux swap isn't showing up in the partition table at all. I might just be missing something simple here and would like another set of eyes to help me figure this one out. Does the problem have anything to do with the partition table being out of order (ie. not in order of what regions they cover on the drive)? From the liveCD I've run
Code:
sudo fdisk -lu
sudo sfdisk -d
sudo parted /dev/sda print
and have received the following output:
Code:
ubuntu@ubuntu:/mnt$ sudo fdisk -lu
omitting empty partition (5)
Disk /dev/sda: 60.0 GB, 60011642880 bytes
[code]....
I am installing Ubuntu on the same hard drive as Windows 7. The partitions of Windows 7 have already occupied the left part of the hard drive. From left to right, the Windows partitions are one partition for Windows booting, one for Windows OS and software installation, and one for data which is planned to mount on Ubuntu. I was wondering how to arrange the order of partitions of root, home and swap, i.e. which is on the left just besides one Windows partition, which is in the middle and which is on the far right?
View 1 Replies View RelatedIf I were to have a situation where I had installed the driver for a printer but when I went into printing on the control panel to "add" the printer the driver didn't show up - could I or should I consider manually editing some configuration file to get the printer recognized/ installed on the machine? If that were a good solution, how would I do it? What file would I look for? What would I edit in it? I know that first sentence is probably hard to read but I don't know how else to say it.
View 1 Replies View RelatedI know how to install VLC via terminal sudo aptitude install -vlc But i want to know how to install VLC manually by downloading package or something like that i googled but i didn't found anything ..
View 8 Replies View RelatedI am running a Dell Dimension 3000 and I intend to install Ubuntu on it. On it, there is a partition, Dell Utility Partition, which I am hesitant to overwrite. The main partition which I want to install Ubuntu on I formatted in ext4. I try to install Ubuntu from the live cd, but it won't allow me to strictly use the ext4 partition. It insists to either use the entire drive or to have me manually choose the partition. How would I go about doing that? I relatively new to Linux in general
View 2 Replies View RelatedHow can I set up an encrypted LVM without using the "Guided - Use entire disk" option of the alternate installer.
My drive is quite big and I would like to be able to have my encrypted LVM as well as an extra LUKS encrypted partition which I could mount whenever needed. Unfortunately the options in the alternate installer do not allow me to do this without using up the entire disk.
i am working off of this link https://help.ubuntu.com/community/EOLUpgrades/Feisty and when i try to follow the instructions below "download tarball manually" i get this. chown: cannot access '/tmp/tmpaIgInN' : No such file or directory
View 9 Replies View RelatedI want to install manually xcb_2.4 on Ubuntu 9.10. The problem is that the package neither contains a configure nor a install file so I cant use './configure' and 'make install'.
View 3 Replies View RelatedI am trying to install some software through wine, but unfortunately the cd is not auto-mounting, is there a way I can manually mount the cd and continue installation?
View 9 Replies View RelatedI did a "dirty install" of Maverick over my existing Lucid system. That went very well and I am having no problems with Maverick. However, this morning, I decided to clean off the old Lucid kernels. In the past, after installing a new kernel on the same Ubuntu release, I have done this by running "aptitude search 2.6.32-24", for example, then running "sudo aptitude purge" for the kernel and header files it found.
Now that I have changed releases, aptitude no longer finds the Lucid kernels installed on my system, even though they still reside in the file system and show up on the grub2 menu. So, how do I manually find everything necessary to delete for the old Lucid kernels?
I want to set up ubuntu 10.10 on a computer WITHOUT Internet access.I also need to install a package on it but it has several dependant libraries (eg libX11-dev)If i just have the names of those libraries & the package, where can i find them, so that they can be downloaded onto a pendrive & then installed onto the comp? (What would a library file look like after download?)
Also after i have copied the files onto the other comp (assuming that it was possible), how do i install the library? Would synaptics recognise that i have installed this library if done manually by this method?
I'm just trying to install Ubuntu server 9.10 to a logical volume manager partition. I have two physical disks of 250GB - each has a 10GB primary partition and 240GB logical partition for LVM
I created partions using 'manual partitioning'.
It shows:
LVM VG grpA 240GB
LVM VG grpB 240GB
SCSI1 (sda) 250GB
#5 logical 240GB K lvm
[Code].....
I want '/' (i.e root) to be on a logical volume in the lvm 'grpA' (on disk sda).
But the installer does not offer creation of Logical Volumes or their format - only seems to go as low as volume group. If I try continuing installer complains that 'no root file system is defined'.
Does anyone know how I create the LV and install with root there?
(On another machine with 9.04 I used the guided partitioning with use entire disk and lvm - that just worked putting root in the lvm... but this current machine needs a specific layout).
Here any know how to compile the driver file manually?
For example i have been insert the Realtek Ethernet card in my customized kernel and kernel can't detect the card. I know the c file 8139too.c which going to use by the realtek Ethernet card.but i don't know to how to compile the file and make this as a kernel module..
When I try to install fedora 11 from the Live CD I get the hwaddress error and cannot continue. As far as I know there is no fix for that other than installing from the full DVD, but I don't have the facility to do that.What I would like to know is if it is possible to install fedora manually for eg. create the partitions with something like fdisk and copy all the files over from the live disc to the hdd and then install grub to start fedora and use it as if it had been installed normally.
Sorry if this is a stupid question. In my head I have this idea that anaconda is some helper program to install fedora and that it should be possible to do it yourself with the right commands.
After updating to Karmic, Synaptic shows almost all of my installed packages in the category "Installed (manual)", including about half of the packages that belong to a clean Ubuntu installation (e.g. apparmor, apt and hundreds of others). As a result, I can't easily get a list of those packages that I did indeed install manually and may want to remove. Is there a way of removing the "Installed (manual)" flag from all packages?
If I could do this, all packages that do not belong to the core Ubuntu system should show up as "Installed (auto removable)" and I could individually mark only those as manually installed that I really still need and let apt/synaptic uninstall everything else. I know that with today's hard disks, disk usage of installed packages is not an issue. But those packages accumulate over time and need to be updated with every security update and every ubuntu dist-upgrade, wasting time and bandwidth.
I am trying to install Ubuntu 9.1 on an existing xp op. It is prompting to replace xp.how to install manually the dual boot with out replacing xp
View 1 Replies View RelatedI am a total noob for Linux / Ubuntu. I have been using windows all my life and I decided to get rid of Bill finally. I want to install Ubuntu by Manually partitioning my HD. I have a 500GB HDD. optimal partition scheme. I repeat i am a total Noob. please let me know details for each partition like
1. Primary or Logical
2. type
3. mount point
4. size
I am having no other OS in the pc. just planning to have ubuntu. no dual boot needed.
going through synaptic and noticed that a ton of packages are marked as being manually installed when they most definitly did NOT installed them, is there a command i can use to reset all the dependencies?
View 2 Replies View RelatedIf you manually partition Ubuntu Linux; how much do you allot to your root directory? If someone installs many games and software, should they use a very large root directory such as 30GB or more?
View 6 Replies View Related