Just installed Ubuntu 11.04 clean on a Dell Inspiron 1150 with a Broadcom BCM9430MPSG Rev. 4 Wireless Adapter - I have no wireless support. Checked for driver updates under System Administration Additional Drivers and Update Manager.
Networking works fine on a hard wire.
I decided to use the STA wireless driver in my Ubuntu 10.04, and my connection actually became faster! Only problem is that it keeps on asking for my wifi password. I didn't have this kind of problem when I was using the b43 wireless driver - it just automatically connects everytime I reboot. how I can make my laptop stop asking for my password everytime I reboot?
View 3 Replies View Relatedinstalling the Broadcom Wireless LAN driver. I am working from an HP Pavillion dv6-2 2150us (if that has any relevance). The problem seems to be with the installation method I have used. I burned the ISO file properly onto a CD, but I did not install through the disk boot-up method. The reason for this is because I couldn't partition my HDD correctly (I am trying to dual boot with the Windows 7 OS already installed). So, I installed Ubuntu via the option from the CD Installer through Windows 7. I am not sure how to go about getting and installing the Broadcom Wireless LAN driver onto Ubuntu.
View 1 Replies View RelatedI must be able to perform customized (non distribution-default) (re)installations of Linux fairly often. As such, I have been looking for a distribution which would allow me to automate the process. CentOS's usage of the Anaconda installer permitting the use of kickstart files, coupled with its stability, maturity, etc. seems to be what I have been looking for. I would like to be able to use the netinstall media in order to perform up-to-date kickstart installations (i.e. grab the 'latest' updates targeting CentOS 5, rather than installing the 5.4 versions and upgrading the system after the first boot).
The wiki seems to provide instructions on creating up-to-date media. However; this is less than ideal, because it would mean burning new media every time I need to (re)install. I realize that finding out if this is possible or not is a simple matter of grabbing the netinstall ISO, burning it and seeing if it supports a direct up-to-date install (or not). However, this is where I run into another problem. The machine in question uses a broadcom wireless card and, as such, would have to make use of it during the installation. I can get the card to work properly on an installed system via the bcm43xx kernel module + 3rd party firmware (extracted to /lib/firmware/ via bcm43xx-fwcutter).
I do not know if it is possible to modify the netinstall ISO so as to load this module (and the modules it depends on) automatically -and- somehow add the necessary files to /lib/firmware/. To summarize (in hopes of clarifying if the long version is confusing) :
1. Can the netinstall media be used to directly install an up-dated system?
2. Can the netinstall media be reworked in order to automatically load the bcm43xx module and can the firmware files be added to the /lib/firmware/ directory of the.. system booted from the media?
I have had trouble in nearly every linux distrobution cept for backtrack 3(heavily modified ubuntu which has a lot of wireless drivers on it. i know A LOT of people in the past have had trouble with these cards.
View 9 Replies View RelatedI just installed Ubuntu 10.10 on my new Acer Aspire 5551 notebook and for some reason Ubuntu does not want to install the Broadcom STA Wireless driver comes back with an error Sorry installation of this driver falied please look at the log file for details
/var/log/jockey.log
I computer literate but I'm new to the Ubuntu world.....I already know that this OS is far superior to any Windows based OS it is not even comparable.
I have kernel 2.6.26 and I think I need 2.6.27, but update manager says my system is up-to-date. How do I get an upgraded kernel? I have a wireless card but I cannot find anything in the UI to enable it, or connect to my home net. Would Debian come with a connection manager with an oddball name?
View 3 Replies View RelatedMy broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.
View 4 Replies View RelatedI just installed Lucid Lynx on my Dell Vostro 1000 laptop. The problem I'm having is that my wired network card has died on me prior to installation. I'm having the hardest time finding the required files to make my Broadcom BCM4311 wireless card work without being able to download any packages from the web. If anyone knows which files I need and which order I should use to install them that would be great.
View 5 Replies View RelatedI've been running Karmic since it was officially released on my Dell Studio 17 (specs are in my signature) with a Broadcom wireless half mini wireless card.hen I installed Karmic, it gave me the option to install proprietary drivers for my video card as well as 2 Broadcom drivers, STA and one of the BC43 drivers. I installed all of these, and the only problems I had were with the audio. I spent a few days troubleshooting the audio and finally got PulseAudio set up for my card.
Almost 3 months later, I was making use of my wireless network at home, as I had done plenty of times over the previous 3 months, when I closed the lid (thus putting the computer into sleep mode) and took it to the hospital to stay with my fiancé¥ after her surgery. When I got to the hospital, I couldn't get their network to show up. Network Manager didn't even recognize the network. We had also brought my fianc饧s laptop (same machine with a slightly less powerful CPU and only 4 GB of RAM). She is running Windows 7, which detected the hospital's network with no problems.After trying to ad-hoc the hospital network with no success, I finally just gave up and played Sudoku and toyed with some graphics stuff in GIMP until we came home. Upon returning home, however, I was shocked that my card didn't even detect our home network.
I have been unsuccessful for the past 3 days in getting Network Manager to identify our wireless network. The wired network connects without issue and I am able to make use of a USB Belkin adapter, which identifies all 7 of the various wireless networks in my neighborhood, including our home network.While I would be able to simply carry my Belkin adapter with me in order to make use of wireless networks, I would really like to solve this problem with my Broadcom adapter. I've gone through the Ubuntu Wireless Network Troubleshooting guide, but I still can't get it to workOutput of lshw -C network:
Code:
*-network
description: Wireless interface
[code]...
I am running FC13 on a Compaq Presario 2100 using a Broadcom BCM4306. I was able to get it running thanks to Fedora Unity Project. But It's a very unstable connection. I don't know what settings to adjust or enable or disable. It's not my router, this is the only wireless connection in the house that I have trouble with.
View 1 Replies View Relatedwhen it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
View 7 Replies View RelatedI'm happily using OpenSuse 11.2/KDE on my laptop equipped with a Broadcom BCM4311 WLAN chip, but today, after a restart, WLAN ceased to work. I mean that Network Connection doesn't show anymore available WLANs. Two things that seem strange to me are that the
[Code]...
I have this problem with my wifi for 2 weeks now.It used to work great and after some updates the Network Manager keeps rejecting my wpa passwords. The wifi card is working (tested with other OS's) and the wifi light on my HP laptop is on. I have installed broadcom drivers.The problem is similar with this one here but changing from default kernel to desktop didn't work in my case. have already read through Getting your Wireless to work and Broadcom instructions
View 7 Replies View Relateddell laptop and went out on thenet looking for a solution for my failed wireless interface. i downloaded the firmware but then my interface still fails to come on after a reboot.
wlan0 IEEE 802.11bg ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=0 dBm
[code]...
I recently bought Dell Studio 15 laptop, installed OpenSUSE11.2/64 in addition to Win7 64 bit. I am trying to connect it to my wireless network at home and at work, but without much luck.
1)Found out that Dell 1520 WLAN adapter has Broadcom 4353 chipset.
2)saw that b43-fwcutter installed
3)installed broadcom-wl and broadcom-wl-kmp-desktop
After that can see many wireless Access Points at home,selected one via NetworkManager (eth1), configured it (incl. security same as in Win7), it goes from Activating to Active, but I still can not connect - I mean, in the FireFox - "page not found"
iwlist scan (for my desired AP):
Cell 03 - Address: 00:E0:98:FA:5D:1A
ESSID:"Blackhawk"
Mode:Managed
[code]....
I can easily connect to WLAN at home and at work in Win7.
I can't get the wireless to work on my laptop its a hp Pavilion dv9700 it has a Broadcom 4321AG 802.11a/b/ g/draft-n Wi-Fi Adapter i cant seem to get it set up.
View 6 Replies View RelatedWhen I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies View RelatedMy wireless isnt working on my HP 6735s Notebook.Theres no drivers in the driver manager nor does it find my network.The wireless indicator on my laptop also shows my wireless is turned off even when i press the button to turn it on.
lspci:
michael@ubuntu:~$ lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS780 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3)
00:09.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 4)
code....
Has anyone heard of this Ubuntu Tweak program? Is it safe? Its for changing login screens and customizing that kind of stuff. how do i get the firmware for broadcom wireless? Its not in the "additional drivers" like it was in v. 10.10. Im running Ubuntu 11.04 but using Ubuntu Classic on boot (dont care for the new style that much) 1.7ghz Intel Gateway, only 512 mb of RAM
View 5 Replies View Relatedthe wlan card is boadcom 802.11b/g WLAN its on HP 6000 laptop it connect im a total newb to so that dosnt help me very much i see a lot of kernel stuff wich i have no idea what that means but it connects on XP but not on ubuntu i just installed it as a dual OS on XP and im lost i have treid a few things that others have posted on other sites but with no success HELP i am running a Linksys wireless G router the WRT54G model and everything i have tried has not ever enabled the wireless for ubuntu so far anybody got answers please help a newb i can get what ever you ask me to type i bet but i have no Exereince on linux /ubuntu
View 1 Replies View RelatedAfter some serious trouble with Plasma, I decided to re-install 9.10. When booting up, I noticed that the wireless indicator light stayed on orange which usually means that the driver is not loaded.
I have a Broadcom 4312 in a HP Pavilion dv6. I checked the repository but no driver shows up. I seem to remember that it used to be there. Or am I mistaken and do I need to install the vendor driver from the Broadcom site?
I've added the output of lspci and dmesg | gre b43
HTML Code:
HTML Code:
I've got a Dell Inspiron mini 10 that has the Broadcom 4322 wireless chipset in it. I have NEVER got this thing to work satisfactorily despite the numerous tutorials online about getting this damned card to work. I thought everything would finally be fixed with 10.04 but no luck at all. I've tried the b43 diver (which isn't supposed to support the 4322) with no luck.
I also tried the restricted STA driver, which seems like it will work as it identifies networks and even connects to them! However, the speed is excruciatingly slow and connections drop like flies. This netbook is actually a friends that I convinced to let me put Ubuntu on and have them try it out, but they are most surely not going to be impressed if the wireless never works.
I installed Ubuntu Netbook on my windows xp machine, a HP Mini 110 with a broadcom wireless card, I installed using Wubi. The wireless on the ubuntu side isn't working and I can't plug into a physical line, how do I fix this?
View 3 Replies View Relatedwith some troubles, i finally installed the broadcom wireless driver. it says it's installed and activated, the blue light on the laptop is on saying the wireless is activated, but for the life of me i can't figure out how to make it connect. the only network connection icon i have is the wired one. it's not showing the wireless, or available wireless signals or whatever.
this is my first time using wireless with linux (thought i've been using linux for about 4 years now), so maybe there's some stupid little box somewhere i didn't check or something. any ideas?
the laptop is an HP Pavilion dv9000, the distro is Ubuntu Studio 10.4, and the wireless card is a broadcom, and is installed/active according to the hardware drivers window. i've seen some posters having a problem in 10.10 with everything appearing to work, but just... doesn't. haven't seen a solution for that particular problem though
I have a Dell Vostro 1400 with a BCM4311 Broadcom wireless card that I just reinstalled with 11.04 from 10.04. I have the drives installed and it seams to be working when i run the 'Additional Drives', but I can't get the wireless adapter broadcasting. I followed the instructions given in the knowledge base on installing Broadcom Wireless, to see if I could get it running and that is where I saw the difference between the example and my computer when writing the 'sudo lshw -C network' command. In the example it said it was broadcasting under configuration (just like my wired networks below) and in mine it does not (see below for copy past).
I can't find a tickbox in the systemtray to enable the wirless networking that I had before the update to 11.04 (the 'Enable Networking' tickbox is still there and the wired network works fine - that is how I got online to do this post). I have the hardware switch turned on and I have been in the BIOS and made sure that the Wireless is enabled.Anyone who knows what could be wrong? Where could I go from here?Quote:
morgan@morgan-Vostro-1400:~$ sudo lshw -C network
[sudo] password for morgan:
*-network UNCLAIMED
[code]....
ive installed ubuntu 11.04 and my broadcom wireless is not recognized.
View 8 Replies View RelatedMy Broadcom STA wireless driver has failed to installed. The error report says that "PLEASE HAVE A LOOK AT THE LOG FILE FOR DETAILS: /var/log/jockey.log WHAT SHOULD BE DONE TO GET THE WIRELESS STA driver functional.? Gotta see it functiioning back!
View 5 Replies View RelatedUbuntu 10.04 fresh install 64bit. Wireless was working in 9.10, now does not even show up in restricted drivers. Installed bcwl-kernel-source, and b43-fwcutter. ifconfig, iwconfig only show eth0 and lo - no wlan
Other restricted drivers show up - using NVIDIA driver with Compiz running better than ever on 2 screens
Here is the output from the collectNWData script found at [url]
I do notice that in the firmware section that both b43 and b43legacy are listed. Somewhere I reads that I should be using b43 - not the legacy version. Should it be blacklisted?
I'm working on Lucid, in HP Pavilion 9730us laptop.
My wireless broadcom card was working just fine until now as i installed it with the Hardware Devices manager, Today i put a new ALFA AWUS036H usb card to work with aircrack. both cards were working together for a while, but as i started playing around with aircrack the broadcom card of the HP has stopped working.
I made a mistake and followed the aircrack tutorial for R8187 / ieee80211 stacks driver, while i'm using RTL 8187 / mac80211 stack drivers, and blacklisted the RTL8187 , rebooted and then both card didn't work. I un-blacklisted it, and the ALFA is working but the broadcom not!
iwconfig shows me only one wireless card on wlan0 the blue light showing activity in the HP card doesn't go on.
Tried to uninstall and reinstall broadcom drivers, still no change.