Ubuntu Installation :: Upgrade Or Reinstall From 8.09?
Apr 10, 2010Should I upgrade from 8.09 to 9.10 or does this require a clean reinstall? If the latter, then how do I go about doing this as I dual boot Win XP and Ubuntu?
View 1 RepliesShould I upgrade from 8.09 to 9.10 or does this require a clean reinstall? If the latter, then how do I go about doing this as I dual boot Win XP and Ubuntu?
View 1 RepliesI wanted to upgrade qbittorrent to the newest version. So I went to the official website and followed the steps of typing some commands in the terminal. However, it said missing libtorrent-rasterbar5. I went to Synaptic and checked, showing "libtorrent-rasterbar6". Does this mean my version of libtorrent-rasterbar is too new?
And I've removed something regarding qbittorrent because I wanted to install rasterbar5. I searched for rasterbar5 in the Net and downloaded it. It connected to the Ubuntu Software Centre automatically but it showed unable to install.
So I thought I failed to upgrade qbittorrent. I just wanted to install the original version (v2.4.0). I did it like the first time I downloaded qbittorrent. Open the Ubuntu Software Centre and search for it and press "install". It failed! Because a type of repositories named "qbittorrent" showing conflict.
I've dealt with a similar problem regarding GIMP successfully before. But I can't remember.
I upgrade to fedora 9 from fedora 8. After upgrading I still gets F8 modules appear when I used system update. It seem that my Fedora 8 installation has a know bug that updates are halted, and this problem is not resolved during OS update. Since I have not install any other software yet I would like to make a clean installation of fedora 9. How can I remove the fedora 9 from my hard drive and make a fresh installation?
I use GRUB as a boot loader and have window install as well.
when i try to upgrade my system via apt i get the following error:
Quote:
user@user-desktop:~$ sudo apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
Had a working WinXp/Karmic dual boot system. Tried to upgrade Karmic to Lucid and my daughter rebooted the system during the upgrade. I decided to do a fresh install of ubuntu, leaving Windows in place and it succeeded until the end when it said it could install the bootloader, so I proceeded without. I meant to say "it said it couldn't install the bootloader, so I proceeded without.
On booting, Grub drops to the command line.
I get grub>, not grub-rescue>
I did ls in grub and it showed the partitions I expected
/sda5 is /boot
/sda6 is /swap
/sda7 is /
/sda8 is /home
I tried to follow the grub2 command line manual by entering
Code:
set root=(hd0,7) (success)
linux /boot/vmlinuz-2.6.32-24-generic root=/dev/sda7 ro (failed - couldn't find file)
so I'm now a bit stuck.
Here are my bootinfo_script results (by the way, sdb is just an e-SATA hard disc with nothing installed on it, I don't know why bootinfo thinks Windows is there. Windows is on /sda2 with some sort of backup/recovery partition on /sda1)
Code:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #7 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb .....
I will be version-upgrading a friends (Ubuntu only) laptop very soon. It is 9.04 now and the new version will be (ideally) 10.04.1 The machine has a large unused area on the hard drive and who has known this situation was to use the uncommitted area to do a complete new install of 10.04.1, leaving the 9.04 unchanged (useful insurance). Then, copy, paste (?) the /home directory from the 9.04 into the newly completed installed 10.04.1 overwriting the installed directory.
Opinions seem to support the notion that such a paste into 10.04.1 is likely to be successful and trouble free as long as the 10.04.1 installing username is the same as the 9.04 username with same privilege level. I would be grateful for comments here, particularly with any details, gotchas, you can see.
So I was messing around trying to uninstall Nibbles and reinstall since I have an issue starting that game and something happened and removed the submenu under Games called "Logic", which had another whole list of games.
Is it possible to reinstall the games package or reinstall the update?I'm thinking more of the lines of a system restore or something so back 2 days from today.
obviously natty is flawed. I upgraded as an option in ubuntu studio's update manager. not sure if studio was ment to be upgraded to natty but it was in the manager, as studio is still 10.10 maverick. regardless the results have been disastrous. i am running into problem after problem as apparently many users are.
i had recently done a fresh install of ubuntu studio maverick which seemed perfect. as i was still setting up and restoring until i noticed the option for natty. so while i'm still at it i think i'm going to reinstall 10.10 this is the first imperfect ubuntu upgrade i've experienced but linux still rules.
Can I 'upgrade' from 10.4 32bit to 64bit without reinstall?
View 4 Replies View RelatedThis may actually (likely is) be two issues. But since both are happening since I did a reinstall (my term I think you all call it a upgrade 11.04-11.04) I thought I'd lump them together first.
My dell Inspiron mini has (of course) a touchpad and the wireless adapter is AR9285. The touchpad is not being recognized (although in a brief boot up into windows 7 it is fine there). I've tried adding backports, as I found in the documentation, but I'm lost. The wireless adaptor is being identified but the network is being shown as unclaimed. It too worked in Windows, so I'm fairly sure that although both worked fine after initial install, something was lost in the recent upgrade.
My problem is I don't know what to do for either issue next. Most of the documentation is on earlier Ubuntu releases (not 11.04) and I am not ready to backup in order to do a clean install right now. I have a new install I'm cleaning up and a clean reinstall that I just finished and am reloading backed up files onto. I'm hoping I'm missing something simple on this one...just once that would be really nice! So any quick answers? Do I need to split them into 2 issues and post elsewhere?
I recently upgraded Ubuntu 9.10 to 10.04 and my wireless stopped working. It can detect that there are networks around, what their signal strength is, and then try to connect to one, but it just keeps connecting. After around 5 minutes, this stops and nm-applet says no network connection.
After I try to connect, dmesg is spammed with hundreds of the same message. I can not post these here, as I am writing from a different computer and I have no internet access from my main computer.Also, there is nothing in interfaces.conf other than lo. For some reason, my card is referred to as both wlan0 and wmaster0, with this changing depending upon where I look.Most interesting of all is that, even after I reinstalled 9.10, wireless is still broken, even though it wasn't before. It also used to work under liveCD.
I have a home server running Ubuntu 10.04. I want to replace the motherboard and CPU without reinstalling the OS. I read a long time ago that this would sort of work on Windows XP, but with stability issues. However, I have a hunch that on a modern Linux there shouldn't be any problems.
View 5 Replies View RelatedI want to Upgrade a Virtual machine running on RHEL5U1 to RHEL5U5. Should I go for clean install again or, is there a way I can upgrade retaining the data.
If it can be upgraded without re-install, at which point will I get that option after booting up the machine.
I have a Fedora Core 6 web server I've been testing. Everything was working fine(http, mysql, etc) until I installed Shorewall. After a reboot, now I get "(NONE): LOGIN" From what I've googled on this, this isn't an uncommon error, but I don't see any consistent way to correct this issue. Everyone just says boot single user and change roots pw. But thats where I run into problems. When I log in single user mode and try to run "passwd" to change root pw, I get "module not found". I've tried running vi(vim) to edit /etc/passwd but I also get an error about a library file missing. So, I'm at the point of thinking about reinstalling FC6. I'm assuming I should upgrade to a new version of FC. If I do this, will it "break" http and mysql? What version would be safest to upgrade to from FC6? Would it be better to just reinstall FC6 on top of whats there?
View 1 Replies View RelatedI want to run Ubuntu Server Edition just at home, however to avoid having to reinstall it in the future when i upgrade hardware, I was thinking of virtualizing it first. Are there any minimalistic virtualisation solutions available at the moment for this sort of purpose? Or even better a linux distro just for this?
View 3 Replies View RelatedA week or so ago I ran an aptitude safe-upgrade and while it was updating mysql I suffered a power-failure. Now, this never really happens in Holland but of course this once it happened at the worst possible time.
I've tried a lot of different things to get mysql working again, but am running into all kinds of problems. First mysql won't shut off properly (it does startup with the computer but I can't connect to it at all) during an aptitude purge. If I kill the process mysql seems to purge properly, but I guess this is not the case because I wasn't able to install it then.
Things seem to have gone a bit more smoothly this time, however:
Code:
snek@snek-server:~$ sudo aptitude install mysql-server
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code].....
how do I retrieve/reinstall Grub without having to reinstall Ubuntu?
View 1 Replies View RelatedI recently installed opensuse 11.2 on my laptop which also had windows vista and windows 7, i created a new partition and the installation went smoothly, after i went to boot back into windows 7 i got a blue screen of death, strangely vista boots perfectly.I could just reinstall windows 7 but its a pain to reinstall all my programs and such
View 6 Replies View RelatedThis is partly a note to myself for the future and a guide to anyone who experiences similar issues.
So, I had to reinstall Windows XP since my previous installation gave me a blue screen error due to reasons unfathomable. Naturally, this deleted the GNU Grub and I could not login to my Fedora.
I read that apparently booting from a DVD installation offers an option to enter the rescue mode. I did not have a DVD, I only had the LiveCD so I had to figure out a way to reinstall Grub from the LiveCD. The following method seemed to do the trick.
Run the LiveCD and open Terminal.
1. Find the partition where the Grub Stage1 is code...
i have ubuntu 10.04 64 bit installed and configured and working sweet. I have reinstalled windows 7 and now i can't boot ubuntu i've tried easybcd to add ubuntu to win boot loader which failed and tried to follow the instructions to reinstall grub through a live cd which i am in at the moment. i go to a terminal and type sudo grub and it brings up the grub prompt. i have mounted all discs and entered the command find /boot/grub/stage1 and it keeps spitting this back at me Error 15: File not found
my hd is a 80gb with partions like this
/dev/sda1 105mb ntfs system reserved
/dev/sda2 45gb ntfs win 7 home premium 64 bit
/dev/sda3 34gb ext4 ubuntu 10.04 64 bit
/dev/sda4 1.5gb linux swap
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
My buddy passed me a CD of W7 I installed & everything was o.k. But then I activate it and reboot it.! It gave me some stinkin error BOOT MSG some like that.! and that I had to press ctrl,alt & delete. Now I cant access or enter it. I wonder if I can install or reinstall from ubuntu 9.10. Cause I cant do it from the bios cause it asks me a password. Which I never had before. Any suggestions linux pros. One more thing I tried recovering it form the win7 repair disc but nothing.
View 3 Replies View RelatedBackground: So i am running ubuntu 10.04 on a amd computer, and this is the second time i have run into this problem. last time i was playing around with os's, trying to get around some annoyances, and i did a reinstall and it worked just fine, but since i have my computer the way i want it and i really don't want to go through the hassle of a reinstall.problem: when i boot up my computer i get a no grldr. exact print out:Try (hd0,0) Fat16: No GRLDR
Try (hd0,1): invalid or null
Try (hd0,2): invalid or null
Try (hd0,3): invalid or null
Try (hd1,0): EXT2: _
I have already tried once to reinstall grub, but i rebooted without unmounting the hd, though i don't think thats the problem, but since that first attempt, i have been unable to boot into live CD mode.
I had recently upgraded my 9.0.4 ubuntu to the latest version, but something must have gone horribly wrong during the upgrade. On boot, it says it has problems and errors loading stuff and when it gets to the desktop, it gets no input from the keyboard or the mouse. Same goes for recovery mode. When trying to run from a live CD the keyboard and mouse work just fine. I have the CD and I wanted to simply reinstall but problem is I don't know how to reinstall over the current installation.
View 1 Replies View RelatedI upgraded from 8.04 to 10.04, and most things appear to be fine. However, after a day or two of inactivity (apart from remotely logging in for SSH), the computer goes into a state where the screen is blank and it is unresponsive (and no longer allows access by SSH, FTP, or SVN server access). I have to reboot the computer to use it again, which I can't always do when I'm traveling. I inquired about this previously -but I'm convinced the solution may be more complicated than suggested because I don't have compiz turned on and the computer's power management is already set so that it's never supposed to sleep. I tried to install 10.04 fresh from a Live CD, but it freezes where it asks me how I want to use my partitions so I can't even reinstall
View 2 Replies View RelatedThat second 320GB HDD that I'm not authorized to mount is where my backups are. Now that I've reinstalled over the Lucid that I trashed on my first HDD I need those. The drive appears under "Places" in the side pane of Nautilus, but not sudo Nautilus. If I could see it under sudo Nautilus I think I could just right click and change permissions.
View 1 Replies View RelatedI would like to reformat my hard drive and reinstall 10.10 desktop from a stick. However when I try and boot from the stick it comes up with the SysLinux 4.0... one liner and hangs. I have tried:
- different usb sticks
- running as ISO
- mounting ISO using Startup disk creator
- finding the known Bug re something similar and deleting the first two letters in the last line of a certain file wihtin the syslinux folder
I am currently running 10.10 - is this why it ignores it? I'm not understanding something,
i just did a reinstall of 9.10 and am having a few problems.
1. hardware drivers for the wireless modem are updated, but not functioning. the driver screen says it's activated, though.
2. when i do to install java (following the instructions at http://sites.google.com/site/easylinuxtipsproject/java), i get the following error: "mv: cannot stat"<file info and move to directory>"
I have recently found out (also in this forum), that my motherboard is simply put: "junk" (as it fails to see the 8Gigs of ram i have). So i will buy another mobo and would like to hear from you if I should reinstall my ubuntu from scratch or try to just run the same OS as i have now (I know, in the MS world this would mean utter chaos and mobo/processor/ram/everything damage - smoke from the machine etc. So: How safe is it to "hot swap" hardware under Ubuntu?
View 2 Replies View RelatedI have Ubuntu 10.10 and Windows 7 on my computer. After not booting into my Ubuntu partition for a while, I noticed that grub had disappeared, being replaced by the windows bootloader. I followed the steps here under "reinstalling from liveCD" and I was able to get a grub command line when I rebooted, but no boot menu. So I booted into Ubuntu and ran update-grub like the instructions say, and the output indicated that Ubuntu and Windows had both been successfully found and added to grub.cfg. But when I rebooted, I still only got the grub command line.
When the instructions had steps for if you had a separate boot partition, I used /dev/sda1 because it is marked by fdisk as being the boot partition. I thought that maybe update-grub was only seeing /boot on the Ubuntu partition and wasn't touching the boot partition, so I tried mounting /dev/sda1 as /boot, but after that grub didn't boot at all, it just goes straight to Windows and I haven't been able to reinstall grub even after following the steps again several times. How can I get grub back?