Ubuntu Installation :: Partition Limitation For Multi-boot?

Apr 6, 2010

I have a 500G disk and want to setup it as a test machine with many partitions.

The first partition is for Windows XP. It works. I use USB disk to boot Ubuntu, so I can use Ubuntu's command dd to backup my XP partition.

Than I set more than 10 partitions. Then Ubuntu booted from USB does not always work. It always boots, but when I open a terminal, I get funny characters.. It seems the problem is something to do with number or size of partitions.

Is there a limit for number of partitions or size of partitions?

View 9 Replies


ADVERTISEMENT

Fedora Installation :: Reuse The /home Partition On Multi-boot Systems?

May 5, 2009

Having already borked my system once while deciding to nstall Fedora 10 under the influence of a false sense of bravado, alcohol induced, I thought I should ask for a little insight before trying things again. Once I get my system fixed and before consuming alcohol that is.Short version:I thought Id be smart and mount the /home partition I use for openSUSE as /home for Fedora, I mean that why I made /home it own partition right? Well, thatwhen the alcohol took over and I thought I be rilliant(not so much) and just use my SUSE username for Fedora too, since, you know,e already got all my files and settings stored there.

Thus my request for the answer on how to correctly use the same /home partition across multiple OS installations; with the preferred goal of retaining access to email folders, various files, games (WINE) and such no matter what distro I�m using. Would it really be as simple as just not using the same user name for more than one distro? What addtional issues does that solve/create

View 3 Replies View Related

General :: Ubuntu - How To Remove A Partition A Multi-boot Machine

Jun 11, 2011

I have 4 OSes installed:

Windows XP on sda1
Backtrack on sda5-6
Ubuntu 11.04 on sda7-8
Ubuntu 10.10 on sda9-10

I want to remove Ubuntu 11.04 (partitions sda7-8). I tried using GParted from Ubuntu 10.10, but it says that I have to unmount logical partitions with a number higher than the one being removed.

View 2 Replies View Related

Fedora Installation :: Multi Boot System - Set Up The Boot Loader ?

Mar 18, 2010

I'm trying to install Fedora onto a computer that has Windows XP on the first of two SATA drives. Windows 7 is on the second drive.

I installed Fedora no problems on a 14 gig free space I created on the first drive and told it where and what my other OS's were. Fine so far. I didn't tell it to overwrite the MBR on the XP (first) drive. I took the second option which I "think" put the boot loader on the fedora partition.

All good - till I rebooted and I just saw my Windows 7 loader with my options for XP and Windows 7 but no Fedora.

So, if I overwrite the MBR on the first drive, will that mean I can't access my Windows 7 installation?

How SHOULD I set up the boot loader?

View 4 Replies View Related

Ubuntu Installation :: How To Configure The Multi Boot

Aug 21, 2011

I want to install Ubuntu 11.04 along my current Windows XP installation and I am trying to figure out the following:

1. How to recognize the relationship between Windows disk drive letters and the Linux disk drive indicators like /dev/sda/

2. How to configure the multi boot?

3. Where to place the Linux swap file?

4. Which Linux filesystem is the best for general use?

The specifics:

Pair of identical Seagate SATA2 80GB drives partitioned in Windows as follows:

When looking through the Ubuntu installation to be configured, I assume that drive 0 is /dev/sda where I have 3 partitions sda1, sda5, sda3. Drive 1 would be /dev/sdb with partitions sdb1, sdb5, sdb3 and I am not sure which corresponds to the Windows drive letters.

I would like to dedicate the empty drive K: for the Linux installation, swap space & data, and use minimal amount of space of drive C: for the dual boot.

View 5 Replies View Related

Installation :: Creating A Multi Boot Dvd?

Jun 2, 2010

I would like to create a multi boot dvd with multiple distros on it. I just got a linux mag with 5 distros on it and all of them boot!! This is by far the coolest thing i've seen. How is this done? Is there a program that will let me select more than one iso image and then create a bootable disk with all the distros I want on it and create a menu that will boot to the different distros?

View 9 Replies View Related

Ubuntu Installation :: Multi Boot (5 OS's) Lost 2 Upon 9.10 Upgrade

Jan 1, 2010

I lost my FC10 and PCLinuxOS 2007. Ubuntu 9.10 64bit is good, as is XP and Vista. What's the repair procedure? My old menu.lst was this:

[code]...

Is it just a matter of editing partition numbers, as the old menu.lst?

View 9 Replies View Related

Ubuntu Installation :: Lost Multi Boot Options

Mar 17, 2011

Can some one point me in the right direction as to how to fix this.I have mint 10 gnome on /dev/sda1, then I have mint 10 kde on /dev/sda3, all working great. I have just installed ubuntu 10.10 on to /dev/sda4 all good after the first reboot (when asked to remove disc) there is a screen that shows all of my boot options (ie ubuntu 10.10 mint 10 gnome mint 10 kde) pick ubutnu do a full upgrade including new kernal reboot and at the screen it only shows ubuntu 10.10.result of boot info script below.

[code]...

View 3 Replies View Related

Ubuntu Installation :: Grub Multi Boot With Raid 0

Mar 20, 2011

There have been many postings on doing Raid 0 setups, and it seems the best way looks like softRaid, but there were some arguments for fakeRaid in dual boot situations. I've seen some posts on dual boot windows/linux in Raid 0, but I was hoping to do a multi-boot using a grub partition, with several Linux distros and Windows 7. There will also be a storage disk for data, but not in the array. From what I gather, I'll need a grub partition which can only reside on one of the two disks, one swap partition on each disk, then the rest I can stripe.

I've got two 73GB WD raptor drives to use for the OS's and programs. I'm just getting my feet wet with the terminal in linux (Ubuntu makes it way too easy to stay in GUI), and the inner workings of the OS, so I have several questions:

Is this going to be worth the effort? Obviously I'm trying to boost performance in boot and run times, but with Grub on a single drive, will I see much gain?

Does this sound like the right methodology (softRAID)? I only have two spare PCI slot's, which don't seem like they would be condusive to hardware raid, but someone who knows more could convince me otherwise.

[Code]...

View 5 Replies View Related

Ubuntu Installation :: Multi Boot Clean Disk?

May 9, 2011

I have a new Hard Disk and i need to make a multi boot The idea is: a single home directory and clean installations of:

Ubuntu 11.04
OpenSuse
Fedora
BackTrack
Debian

The problem is:

Can anyone tell me what order its better to install?

Can I install systems of 32 and 64 bits (for example Ubuntu 64 Bits and BackTrack 32 Bits)?

What other operative system recommends?

The mission is simple: Help my family to use different Linux distros.

View 5 Replies View Related

Ubuntu Installation :: Does Windows 7 Install Remove Multi Boot

Mar 31, 2010

I plan to clean install Windows 7 on my system ( currently windows XP ). At the moment I have Windows XP professional together with Linux Ubuntu and I want to keep using Ubuntu. When I do the clean install for Windows 7 Professional, does it leave the multi-bootloader in place? If not, what should I do to bring the multiboot-loader back? I have a CD of Ubuntu 9.10.2.6.31.14. My installed Ubuntu is version 9.10.2.6.31.18.

View 6 Replies View Related

Debian Installation :: GRUB Missing OS On Multi Boot

Oct 29, 2010

I just netinstalled Squeeze to a netbook with Windows7. The installation went well without any problem. Linux is also working OK. When I boot now, grub does not show Windows7. I took default settings during installation. I mean I did not do anything special. What should i do to fix it? Should I run osprober and grub-update?

View 3 Replies View Related

Installation :: Multi-boot Grub Menu Does Not Link

Mar 5, 2009

I have a single hdd, on which I do not require windows OS, just (multiple) linux; it is just a dev mule, exploratory... Have read the saikee methods, and much more... almost there Initial installs were with mint linux 4, just used ml6

partitioned with parted magic
partition table:
Device Boot Start End Blocks Id System
/dev/hda1 * 1 64 514048+ 6 FAT16
/dev/hda2 65 2614 20482875 83 Linux

[Code]....

View 3 Replies View Related

Installation :: Fedora 13Beta, Windows 7 & XP Multi-boot?

May 17, 2010

So I'm new to modifying Grub, and I've recently setup my laptop to contain all of Windows 7, XP, and the Fedora 13 beta on a single drive.Grub is currently setup to boot to Fedora, and the Windows 7 boot loader, and from there I can boot to XP.I'd like to set it up however, to have XP boot "directly" (i.e. bypass the 7 bootloader and go straight for the XP loader).The current setup is:

Partition 1: 7 ntfs on sda1 (primary)
Partition 2: sda2 (extended containing sda5 XP ntfs)
Partition 3: sda3 ext4 containing /boot

[code]....

View 5 Replies View Related

Ubuntu Installation :: Partitions On Multi-boot--primary Versus Extended?

Jul 12, 2010

I'm setting up my laptop to dual boot (default Vista installation and Ubuntu). There's also a possibility I may add XP later as a triple boot.

My laptop came with two partitions already, the second one labelled "Recovery". I was planning on adding three partitions, one for the Ubuntu installation, one for Swap, and one for storing my files (accessible to both OSs). However, this would be five partitions (or six, if I add XP later).

I've never had to deal with this many partitions before and just learned about the maximum of four primary partitions.

View 3 Replies View Related

Ubuntu Installation :: Multi-boot Fail - Sytem Starts Straight To XP

Sep 1, 2010

I'm new to Ubuntu, downloaded the version to run on the same PC as windows XP. Sytem starts straight to XP, never gives the option to start in Ubuntu.

View 3 Replies View Related

Ubuntu Installation :: Multi HDD Dual Boot - Vista + Lucid Lynx - GRUB ?

Apr 27, 2010

I've got a machine that I'd got 9.10 on, that I've now upgraded to Lucid Lynx - and I'm having the same problem with dual boot (or lack thereof) that I was having previously.

Rough scenario is:

(Original Vista machine had)

C: Windows Vista OS + Windows software, etc.: 500GB - single NTFS partition - SATA drive

D: General dumping ground for data. 500GB SATA drive. Was single NTFS partition, now shrunk to install Ubuntu.

So is now:
- NTFS partition (containing general rubbish)
- Ubuntu / partition
- Ubuntu swap partition

... and then 3 x 1TB SATA drives making up an (Intel ICH9R) FakeRaid RAID5 array - that Windows can happily 'see' and use, but I don't care about Ubuntu having access to it or even seeing it.

Lucid Lynx is installed to /dev/sde6 (IIRC) - but when I boot the machine just boots straight into Vista.

I've done what I can to try and get GRUB correctly installed - to the point that right now I probably have it splattered just about anywhere and everywhere.

So - now - the machine boots and simply presents me with "GRUB Hard Disk Error" and stops...

I can fix this by running the Vista repair, with a fixmbr etc. and putting the MBR back to 'normal' on the first boot disk (/dev/sdd in this case). The machine then just boots straight into Vista.

...or I can boot into Ubuntu (or Vista) by booting off a Super Grub Disk (CD) and selecting "Boot Linux" (or whatever it is) - and it correctly boots Lucid Lynx from /dev/sde6

Ideally I want a proper GRUB dual boot menu - but I just seem to be getting into more and more of a mess!

Bootlog below will show what sort of mess I'm in:

Code:

Boot Info Summary:

View 2 Replies View Related

Debian Installation :: GRUB Multi-boot Config Does Not Work On Physical Machines

Mar 26, 2016

I wrote a GRUB multi-boot configuration so I can boot multiple distributions and have storage space on one 32GB flash drive.

set imgdevpath="/dev/disk/by-label/multiboot"

Code: Select allmenuentry 'Debian Jessie amd64' {
        set isofile='/iso/debian-8.0.0-amd64-DVD-1.iso'
        loopback loop $isofile
        linux (loop)/install.amd/vmlinuz
        initrd (loop)/install.amd/initrd.gz
}

This works in virt-manager when I boot the physical usb device a virtual disk with a usb bus and it works flawlessly, but when I plug it into a physical machine the cdrom detects fails to mount /dev/sdb1 as fstype=iso9660.

View 14 Replies View Related

Ubuntu Installation :: Add Unallocated Space To Storage Partition And Not Boot Partition?

Apr 20, 2011

using onboard windows disk management i have made 75gb unallocated to add to the aforementioned ntfs data partition. but, after resizing extended partition, will i need to fix grub even though i will be adding the unallocated space to a storage partition and not the ubuntu boot partition?

View 4 Replies View Related

Fedora Installation :: Installation - Creating A Swap Partition Or A Boot Partition?

Jul 27, 2009

I have a brand new thinkpad X301 with 4GB of RAM and thinking of getting fedora 11 on it. The plan is to have it triple boot with vista/seven and hopefully OSx86. I am aware of the 4 primary partitions limit on an MBR disk. I was thinking of having a swap file instead of swap partition and not creating a boot partition as well. If I install the boot loader(GRUB?) on the root partition will I be able to boot it without any problems by using vista's boot loader?

Or Maybe I should install GRUB on the MBR and add all the other operating systems on it? Does anyone have any objections for not creating a swap partition or a boot partition? When comes to desktop environment I've been using KDE in the past, is there any major advantage of using Gnome over it? KDE seems to look really nice on fedora where Gnome is maybe more stable?

View 4 Replies View Related

Ubuntu Servers :: Multi-partition 10.04 Management?

Aug 12, 2010

I have 2 partitions, 1 for OS and 1 for data. The OS 1 is going to be imaged with every Ubuntu OS update so that this image can be taken from the testing server to the live server. However, the data must stay on the live server, so the imaging it will not erase the data. Therefore, I divided the live server into 2 partitions: OS and data.

I want to be able to save all of my customizations and data on the live server to the data partition. This includes (but is definitely not limited to) MySQL databases, Apache configurations, my /var/www/ folder, etc. How would I go about doing this? As in how do I set MySQL/Apache/etc. to save their configuration files on the data partition? Or is there a totally better way to achieve what I want?

View 1 Replies View Related

General :: Best Way To Do A Multi-partition OS?

Dec 29, 2010

I-ve just bought a new hard disk and i wonder what is the best way to do a multi-partition

So my set of drives is:
120Gb - sata
1Tb - sata2
I was thinking to do like this:
1st partition - Slackware Main OS
2nd partition - Arch Linux
3rd partition - /home
4rd partition - swap
5th partition - wind0ws Gaming only

the 120Gb hard drive i intend to do a /home2 for movies, etc. Is that order above the best or i could make swap as 2nd partition

View 10 Replies View Related

Ubuntu :: Hiding Boot Menu On Multi-boot System?

Apr 15, 2011

I have 4 OS's on a publicly used pc. I want to hide the boot menu on GRUB2 and have it appear only when I press and hold the SHIFT key during boot. Will changing in /etc/default/grub GRUB_HIDDEN_TIMEOUT to 0 safely accomplish this goal? Also, what is the command for deleting all of the former kernel upgrades from the boot menu?

View 8 Replies View Related

General :: Mounting A Multi-partition Disk Image?

Nov 16, 2010

I downloaded an raw SD card image that has two partitions. It caused some file system errors when I tried to dd it directly into an SD card. I am not sure if the card is defective or the image. Is there a way to examine this image without writing it to a physical card? Like trying to mount the partitions separately or checking the tables?

View 2 Replies View Related

General :: Multi Boot Grub - All Systems Recognized But 10.10 Will Not Boot - Cannot Locate The UUID Specified

Dec 20, 2010

Problem: I have installed two Ubuntu servers, 10.04 32-bit and 10.10 64-bit, in a multi-boot environment (also have FDOS and WinXPsp3). The 64-bit will not boot because grub can't find the UUID for the disk with the 64-bit system.

Brief Background: Installed 10.04 LTS two months ago with no problems. 10.04 is in a primary partition on hda with FDOS.

Installed 10.10 (64-bit) in a new primary partition on the same hd. The install seemed to go ok, but the MBR and the fs on the 10.04 were corrupted; could not boot. Restored drive, and rebuilt grub.

Installed 10.10 on separate hd (hdb). In grub step all OS's were recognized so I pointed the grub to hda. Grub failed to boot.

Rebuilt grub from 10.04 on hda. All systems recognized but 10.10 will not boot because it says it cannot locate the UUID specified.

Compared the grub.cfg for both systems, the UUID specified for hdb is the same. Also, when I mount the drive for 10.10 on the 10.04 system the drive UUID is consistent.

I know I must be missing some thing, but I know not what. Have searched and can't find any clues. All other OS's boot ok.

Hardware: AMD64 4GB, 2 internal IDE drives (hda and hdb), 1 internal SATA (hdc WinXP), various USB and Firewire Drives (no bootable systems).

View 6 Replies View Related

Ubuntu Installation :: Grow Boot Sector. Delete Swap Partition. Can't Boot Afterwards.

Mar 7, 2010

I'm running 9.10 off of a 4 GiB CF card. I keep running into space issues with updates, so I purchased an 8 GiB replacement card. I've cloned the 4 GiB card to a .IMG file using DD.I've then copied the 4 GiB image back to the 8 GiB card using the Ubuntu startup disk creator program. Once done, I'm able to properly boot off of the new 8 GiB clone.Unfortunately, the clone ends up with 3.67 GiB of unallocated space at the end *see attached). I tried deleting the "extended" partition that the swap is located at after booting from a Live CD and the system was unable to boot after this. I was thinking that I would delete the swap entirely and create a swap file after I merged the existing partitions, but I was unable to do this.

best way to do this (e.g. get one large 8 GiB partition with my old image on it)? I still have the original untouched 4 GiB card and also have an external CF drive if I need to redo the cloning. I've also used Clonezilla before, so perhaps there's a way to do this that allow me to grow the image as it's being cloned.

View 1 Replies View Related

Ubuntu Installation :: Boot A 10.04 Desktop Live From An Iso Image In /boot Partition?

Nov 9, 2010

My laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list

Code:
# =========== GRUB4GOS ===================================
title == Use grub4dos for the following entries: ==

[code]....

View 3 Replies View Related

Ubuntu Installation :: Why Boot Partition Is Recommended For Dual Boot Of 10.04 And Windows 7?

Jan 5, 2011

if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?

View 1 Replies View Related

Ubuntu Installation :: Separate Boot Partition - Doesn't Care About The Boot Flag On The Disk

Feb 14, 2010

GNU GRUB 0.97
Ubuntu 8.04.4
2.6.24-26

Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.

However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel

From grub:

Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.

Disk /dev/sda:

what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).

The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.

Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.

View 9 Replies View Related

Ubuntu Installation :: Grub2 - Dual Boot Karmic / Unable To Boot Into Archlinux Partition

Feb 15, 2010

After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-

[Code]....

Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-

[Code]....

But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved