I was using Karmic Koala on my Asus 1005HA and everything was working ok. After upgrading to Lucid Lynx I have no network access anymore.
Pinging to my router returns "Network is unreachable".
I upgraded to 10.04 from 9.10.
Network accesses are now dramatically slower.
I upgraded a copy of my previous 9.10 installation so I can still use 9.10.
Network does work with 10.04 but is extremely slow. Website loading is initially quite fast but then slows to a crawl. Second and third tabs appear to stall completely, waiting for the first tab to finish.
All of this works just fine under 9.04.
Toshiba M45-S165
1.5 GB RAM
This is my fourth on-line upgrade from Gutsy (started with Dapper ...) all the previous one went without a hitch !
So I was pretty confident this afternoon upgrading my Lenovo laptop from 9.04 to 9.10.
At one point during the install, I got error messages and was offer to do a "Partial Install". I accepted, different things happened, rebooted. Update manager came on with again the partial update pop-up. Accepted it again, it downloaded more files, rebooted, partial upgrade window again but it failed immediately.
The network connection was gone, clicking on the network icon I got a message that the network manager is not running.
I cannot check or uncheck the "network unabled" choice.
However, 9.10 is running, slow and weird, but no network connection so I cannot try to finish the "partial upgrade"
Every time I reboot the Update manager pops up.
Trying to boot any previous version in "grub" fails right away saying it is unable to mount the drives ...
Is there a way to start the Network Manager from a terminal ?
I have a Dell D420 that I successfully upgraded to Ubuntu 10.10. Everything looks fine except there is no LAN or wireless working. I upgraded the BIOS to the latest version (A06) and there are no proprietary drivers listed under System/Administration/Additional drivers.
when I plug the LAN cable into the 420, the indicator cycles for a long time but eventually displays the red exclamation mark.
I was running Ubuntu 9.10 on my HP G70 laptop and did an upgrade using upgrade manager to Ubuntu 10.04.
Since I haven't been able to get wifi connection or wired working. The Network Manager applet is missing from the notification area and if I try to run nm-applet manually it says it is already running. I tried killing the process and then running it manually in the terminal and although the process appears to be running it is missing from the panel.
Booting into the live cd has the applet working fine so something in the upgrade process must have failed.
I tried changing the theme to see if it displays in other themes but had no luck.
I also tried to log into kde but kde seems to be broken. When I log into it after the splash screen all I get is a black screen with only my mouse pointer.
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
I'm having a problem since my last upgrade from 11.2 to 11.3 (Gnome).
Before the upgrade NetworkManager would run just fine at start up, now I have to explicitly run the command from a console using the root user to start it.
(My problem is the same as this one, only in gnome instead of kde)
After an online upgrade from f11 to f13, on rebooting the setup attempts to configure the wireless connection and fails with a not very illuminating "error configuring your network interface" notice, offering no option but to go back and try again, which of course fails again with the same error.
Wireless card is a D-link that works fine with the ath5k driver in f11.
how I can get out of this vicious cycle and proceed with booting the upgrade?
While upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedI am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies View RelatedI'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies View RelatedMay be there is an answer in some other topics but i'm sure which particular one is really the answer. The problem is the following. I've updated my OpenSuse 10.2 to 11.3 using this site and boot from DVD. But after I'd successfully completed the update I've not succeded to use Internet or local network more. Even I can't ping the gateway, I get just a message that network is unreachable. But I've set all IPs and the firewall is turned off. I already don't know what can I do to make the network working. As you see under Windows I have the Internet access ('cause I'm writing this message). And I had it before OpenSuse upgrade.
View 4 Replies View RelatedI am begining on Ubuntu Server Management I would like to receive your on this doubt In order to have my Ubuntu Server up to date and with the last security patches, is it enough to do:
sudo apt-get update
sudo apt-get upgrade?
If not, please where I can find an easy guide in order to keep or mantain my server OK? Also, what are the risks when we do: sudo apt-get dist-upgrade?
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
When I tried to upgrade to Ubuntu 10.10 using commandsudo apt-get dist-upgrade the following error is thrown:Setting up netbase (4.35ubuntu3) Installing new version of config file /etc/services.
[Code]...
I am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View RelatedI'm running Ubuntu 10.10 and 2.6.35-27-generic. When I run the Upgrade Manager, the 'Distribution Upgrade' window pops up and in bold letters reads 'Running partial upgrade'.
The next line reads '>Preparing to upgrade' and sits there. Mean while, the process begins to perform a great deal of constant hard drive activity. The window's horizontal activity bar reads 'Calculating the changes' at the bottom of the 'Distribution Upgrade' window.
I'm trying to upgrade from 9.10 to 10.04 LTS I've followed [URL] Everything is updated. But, i don't receive the message "New Ubuntu release..." Will I have to download the entire DVD?
View 7 Replies View RelatedI would like to install 10.10 preferably right now.But I'm having issues, dist-upgrade won't upgrade me for 10.04 to 10.10.I tried to go into my Update Manager, but it's not recognizing any new Ubuntu versions.I don't particularly want to wipe my system, so what should i do?
View 4 Replies View RelatedI tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies View Relatedcan some one familair with this issue pls help, i am using a router with wire not wls. here is some info that maybe will help you tell me what i need to do. I am a beginner but im can learn quick. dhclientInternet Systems Consortium DHCP Client V3.1.2Copyright 2004-2008 Internet Systems Consortium.All rights reserved.For info, please visit http://www.isc.org/sw/dhcp/
can't create /var/lib/dhcp3/dhclient.leases: Permission denied
SIOCSIFADDR: Permission denied
SIOCSIFFLAGS: Permission denied
[code]....
i have a wired connection thru a netgear router wgr614, i am running a window machine fine , but ubuntu machine say no connection . i have look around seems to be a common problem . but no simple fix . Network manager is bad , do i uninstall or change thru terminal or .....
View 12 Replies View RelatedI recently upgraded to 10.04 and now my wired network no longer works. I am unsure if it worked at all since the upgrade as that computer is rarely used, but it was definitely working prior to the upgrade. It is some sort of Realtec card, I believe. Does anyone have any suggestions? I'm running 32 bit 10.04 on a 2 GHz P4.
View 3 Replies View RelatedI connect to internet using GSM modem Huawei EC1262. I need to use wvdial to connect internet. I am using Lucid Lynx 64bit on this laptop. On my desktop I have upgraded to Ubuntu 10.10 64bit and my Modem is automatically Identified by Network Manager and after giving username and password I can automatically to internet without dialing throung wvdial.
Now I just want to know that how can I upgrade my network manager in Lucid to the version in Maverick. Is this even possible to do without breaking my system?
I have two laptops, both with broadcom drivers and in both it's working pretty well with my university network but I can't find my home network on the list (I can see my neighbours network). It was working perfectly before the upgrade, and of course, I can connect on windows to my home network.
View 2 Replies View RelatedOn ubuntu 10.4, I upgraded my laptop from a fluky Broadcom 4322 wireless card to a yummy Intel 5300. The system recognized the card as far as lspci and lshw were concerned, but it was disabled. I used "sudo ifconfig wlan0 up" to get it active, removed wicd and installed nmanager, and I could access the internet via web browser and mail.
The issue is that other programs (kismet, wireshark, zenmap, anything that I use at my job) do not recognize the new wlan0 interface at all. I've uninstalled completely from synaptic then reinstalled things like wireshark, but under interfaces I get nothing, not even eth0. Nothing looks askew in syslog or the relevant lshw/lspci searches. Does anyone have an idea on this? The Intel 5300 is rolling along without a hiccup so I doubt the issue is there
Does jexec need to be modified? Not clear from the error messages which jexec is
involved.
Result of zypper update...
The following package is going to be upgraded:
dhcpcd
1 package to upgrade.
There are some running programs that use files deleted by recent upgrade. You may wish to restart some of them. Run 'zypper ps' to list these programs.
The following running processes use deleted files:
You may wish to restart these processes. See 'man zypper' for information about the meaning of values in the above table.
Trying to do the upgrade through "Software Updates", however because there are no current updates, I cannot click on the "Upgrade" button to begin the upgrade process to FC14.
Is there any other way to do this besides downloading the DVD and installing?
I'm now using Ubuntu 9.04 and I think of upgrading it to version 10.04 (when it shall be "stable").I'd like to know if I am supposed to modify /etc/apt/sources.list with the name of the new version even though I upgrade by "update-manager-core" with the command sudo do-release-upgrade
View 1 Replies View Related