Is there any easy way to remove 23mb from my installation I am trying to make a live cd. I have tried the cleanup post as listed...URL...What about removing the themes that I dont use? All I need is to remove 23mb?
View 1 RepliesI installed ubuntu 10.4 on a lenovo T500 yesterday.
Today I am almost sure to have a problem with the fglrx package.
Today I installed the graphics card accelleration driver - I think it is the fglrx, but I am not shure, because I used the gnome fancy gimmick offering this driver. Now the computer starts neither in normal mode nor in recovery mode. In the latter it displays very fast about two screens of the usual lines and changes then something with the display. Trying to use boot=/bin/bash as an additional boot parameter didn't work either. I even tried typing blind a login and something like "apt-get remove fglrx <return><return>".
Booting from CD works.
Here my questions: When I have booted from CD, can I see the synaptic history to verify that it actually is the package named above? When I have booted from CD, can I remove packages from the installed version?
I had Kubuntu 9.04 and Windows XP on a Dual Boot. I upgraded using the update manager to 9.10. (I know, I'm a fool.) The Kubuntu install stated freezing hard on startup, just after the GRUB OS selection screen, at a blinking cursor and otherwise blank screen. I'm pretty sure 9.10 will work great from a fresh install, but the live cd freezes after main Kubuntu boot screen and even Windows live cd only shows Windows partition. fixmb, fixboot, bootcfg etc. do NOT replace the grub as desired.
View 1 Replies View RelatedI used Ubuntu customization kit to "build" my own Ubuntu. It works as a charm. Completely recommended.
I install that custom ubuntu 10.04 on a 2gb pendrive, using usb-creator-gtk and it worked also good.
The only thing is bodering me, is when I boot that pendrive, it appear a window asking if I want to install the OS or if I want to use it live.
How can I remove that window on boot?
I want to boot directly on desktop...that way will be perfect!
I've created live squeeze usb-hdd and if I boot first time the udev system writes the MAC address of the network interfaces into /etc/udev/rules.d/70-persistent-net.rules.Because I use full persistence, the file is there on the next boot and I don't get network running automatically on other computers. My problem is, howto remove 70-persistent-net.rules every time during the startup?
View 5 Replies View RelatedBefore I start, I have searched everywhere I can for help with this, tried everything suggested and still cant do this.
The annoying thing is ive done it before but cant replicate it.
I have ubuntu installed on my usb stick using lili usb creator.
I want to remove live session user (username ubuntu).
Ive created my own account with privileges etc.
Ubuntu is 9.10.
I recently installed Fedora 14 and things were going fine. Until I installed Java SDK (or is it JDK). When I rebooted immediatedly after installing, startup is hanging up on starting; jexec services.
I've tried booting from a live CD, thinking I could edit /etc/init.d/jexec, but so far, I haven't been able to make changed to the local file system. How do I remove jexec from startup from a Live CD?
A friend of mine was complaining about his Windows computer being slow here lately.
I told him he is probably full of malware that slipped past his anti-virus program.
I've heard that one can use a live Linux cd to remove malware from a windows computer. How would I go about doing this?
Is it as simple as booting the cd, then using zypper to install an anti-virus program to the ram file system and mounting/scanning the hard drive. If so what program is the best to use for this purpose?
I've done a good few ubuntu installations for friends and colleagues and now my Dad wants in on the action. His PC is more than capable of running ubuntu 32 bit BUT I've hit a brick wall I've never come across before. I've burnt a CD image of the 10.04 iso from [URL] on my ubuntu box and for some reason, his PC just won't boot from it. If I select the option to manually select the boot source, all I see is the hardware monitor telling me things like CPU temperature. As for the Live USB - nothing whatsoever. Is it possible that I've managed to corrupt the iso file somehow?
View 3 Replies View RelatedLive CD: I dowloaded the ISO, burned it to CD, booted from this CD. It starts to load and I can see the purple background with the loading icons. Everything seems normal. But instead of ending up with the login screen, it ends up with a screen that says 'Please remove all bootup media and hit ENTER' or something like this. So I hit enter and then it shuts off my computer. That's it.
Live Stick: So I tried another option and created a stick with 'usb-creator.exe' that is on the CD. Then I start from that stick, but all I end up is a line of 'Syslinux bla bla copyright 20xx-2011'. That's it. Then it does nothing anymore. The cursor is blinking, but no prompt or whatsoever and keyboard input doesn't do anything.
Now something weird: When I insert Live CD and Live Stick at the same time and then boot my computer, then it boots into Ubuntu. Obviously it loads the first parts from CD and then the rest from stick. Because when I'm then in Ubuntu and try to format the stick, it says it can't do so, because there's system files from that stick in use.
To make Unity useful for me I need to make some changes. I wonder if it's possible to:
1. Hide the top panel or (better) remove it completely (I can live without global menu).
2. Make the Unity Launcher work like a panel - so it won't be possible to move windows behind it.
Just got back to attempting to play with 10.04 using its Live CD. It consistently goes to the "Log In" page and not the Live CD page on running. I saw a Post specifying a F key to be pressed on boot-up to get to the desired starting point some time ago, but did not write it down. Some advice did say press Any Key but this does not seem to do the job. Tried to use the search function here but no joy. Can anyone remember which F key? Note that as a check, I tried to use 9.10 Live CD and this worked fine, so it is not a machine problem.
View 2 Replies View RelatedBeing a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
I downloaded Ubuntu 10.10 2 days ago and tried to instal it on my:HP EliteBook 8540wIntel Core i7 740QMIntel QM57 Express8GB RAMnVidia Quadro FX 1800 with CUDA (1GB)Of course I went 64bit, but the Live CD wouldn't start. Instead I get some weird artifacts on my screen.I can see bits of my Windows-background with taskbar and some of the windows I was using earlier before restarting, like the download manager. If cold boot my PC I see black and white boxes with coloured dots on them.
Thus I thought of an issue with the 64bit architecture and possibly the grafics card too (the artifacts are clearly remnants of data from the VRAM)I tried the same with the 32bit version and got the same issue (indicating NO issue with 64bit, at least not directly).In the end, I installed Ubuntu from the alternate 64bit CD and now am stuck with a non-working installation of Ubuntu.I get some kind of error concerning pcieport (probably PCI Express).When I install Ubuntu on Virtualbox through Windows 7 however, I don't get any kind of issue (I'd still like to be able to run Ubuntu natively)Any idea on how to fix the problem?PS: I'm not very experienced with Linux, so if you ask me to go into console mode, please be detailed on what command I should input.
Ive managed to get myself in a bit of a hole through fears of destroying my WinXP on a new dual boot installation. I�ve been using Ubuntu (10.04 lts) alone on an old machine which died, so I thought I�d just move the hdd to my main machine & dual boot it with XP.
I booted from the 10.04 lts CD to set this up, I let it do as it suggested & assumed it would see the existing Ubuntu installation & modify it to dual boot with Win XP. Which it did except I now have two instances of 10.04 on the second hdd as it added a second partition for the new. Leaving the already installed 10.04 alone. I saw no options other than the advanced partitioning which I did not look at.
How please can I correct this & go back to having just one instance of 10.04 on the Ubuntu disk to dual boot to � I am sure there must be an easy way. I have nothing on the Ubuntu disk I need to preserve. I know nothing about Linux command line.
I have never had to do this before But I'm giving my laptop to my mother when my new one arrives and I need to remove the ubuntu installation and get the disk space back.
A few months ago the install stopped working. I can't remember what the error said... and tbh I can't be bothered to reboot twice to read it, but it has to be removed now anyways.
Had a look in windows to see if I can do anything in the disk manager, but it appears I can't. Oh wise ones, please, which path should one take?
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
I downloaded the .ISO for Fedora Core 14 Live, with the intention of installing it to my HDD.
I burn the .ISO with no reported problems.
I boot to the installation CD and can get to the point where it asks me to Login (a timer is also going down for Automated Login).
Once I click "Login", nothing else ever happens.
I can hear the disc spinning in the drive and it's trying to load something, but it never does.
I thought that maybe my older (2003) laptop might just be slow, so I allowed it to do whatever it seemed to be doing overnight while I slept.
Well, I woke up this morning and it was still doing the same exact thing with no results.
---------- Post added at 05:54 PM ---------- Previous post was at 05:51 PM ----------
Oh, and I intend to dual-boot. I have already made a partition using Norton Partition Magic. It's NTFS filesystem for now, but I figured the Fedora Installation would give me an option to use that partition anyway - NTFS or not (meaning, it would wipe the NTFS file system and use whatever it is that Fedora Core uses). Am I mistaken in assuming this?
I decided to do a clean install of 10.04, the machine was previously running 10.04 from being upgraded day by day from a beta install.I used checked good 10.04 live CD as live and gparted to delete a partition on sdb. My intention was to install into the largest free space on the drive, (which I ultimately did). There are two HDs on the machine, Windows on a partiton and a couple of installs of ubuntu on the first drive, the second drive had unpartitioned space and ext4 data partition and a swap.
I then restarted and after a space bar press, used the menu second option to install Ubuntu.I subsequently saw an error window:Installation failedThe installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again.Just in case, I did the whole thing a second time, but same result.I continued, using the subsequent desktop session. I chose the desktop Icon to install Ubuntu, which all then seemed to go okI am an experienced user, so I have confidence in Ubuntu, however, I believe new users would be suffering a loss of confidence at such situations.
I'd like to install Ubuntu 10.04 32 bit, over my Ubuntu 10.04 Amd64.
When I insert the live CD (that is working, I've used it yesterday to
install on my desktop at work),
the Boot from CD is skipped (but is configured properly
in the BIOS, in fact when I installed the 64bit version I had no trouble
at all) and the existing OS is loaded instead.
It seems to me to read some error related with the device (but
is fast and can't be sure what the message says).
After Ubuntu has been loaded, I can read and explore the CD.
I'd like to know how to solve this issue, any advice?
I'd want to boot from cd again, but if you know how to start
live installation when Ubuntu is already running, may you please let me know?
I'm thinking of installing Ubuntu, but before I do that I'd like to know if installing it removes your copy of Windows. If it does, is there any way I can work around that?
View 1 Replies View RelatedDownloaded few minutes ago Fedora 15 live x64 and used Fedora live usb creator to make my usb drive bootable.Once configured correctly my bios Syslinux starts but it hangs on the startup message
View 5 Replies View RelatedI've finished the installation of Debian Squeeze using Installer loader from Windows. But the Installer menu is still appear on Windows Boot Manager.
I've try to uninstall the "Installer Loader" from Windows and I got an error message about BCDEDIT (if I'm not wrong), during uninstallation process.
I ignore it, and continue the uninstallation process until complete. But, After I reboot my computer, the Installer menu is still appear on Windows Boot Manager.
I'm using Windows Vista Business SP2.
I am using 6.06 live CD and I'm trying to load ubuntu on a G4/1Ghz laptop with 1GB of memory and a 50~60GB harddrive. I want to use it to write simple programs (c++ and fortran, but I can't get it to compile -- it doesn't have g++!) I cannot connect it to the internet, so how can I get it to install with g++? I thought there'd be a more involved long list of things to include/exclude, but there isn't. I ordered a CD/DVD version of 9.10, but that won't be here for an estimated 4~6 weeks. How can I get this to work. I've tried using my dual core mac running 10.4.11 to download the image and burn it to a DVD, but it won't do it... but that's a second issue. What I need is c++ in the G4 running ubuntu.
View 1 Replies View Relatedlooking for the live CD ISO for 8.04. Looked all over the ubuntu down loads but no banana. Where can i find it? TIA
View 1 Replies View RelatedYesterday I wanted to check out the new Ubuntu version (10.04) but unfortunately this failed. I downloaded as usual the Ubuntu live CD image and burnt it on a RW-CD I had. I used Nero's software under Win XP Pro... The creation of the CD was fine... It booted from the CD, I choose the language, the try Ubuntu without installing. After this point nothing went as it should... I got a lot of error messages, the screen was in text mode it finaly stoped with a text mode ubuntu command line.The errors were mostly I/O errors I tried to use the check disk option but also failed same kind of errors and at the end somthing like trying to connect to plymouth connection refused. My computer configuration is the following:
AMD Athlon 2800+ (sk. 754)
2.5GB RAM (1x 512MB, 2x1GB, all different modules)
Epox 8KDA3i nForce3 250 motherboard
ATI Radeon 9550, 256 MB video card
A realtek based NIC, PCI slot
[Code]...
I downloaded the cd and burned it and checked it and all that
I start the computer and the press f6 when that picture of the guy and the keyboard comes up and then I choose try ubuntu without installing
Then I can se a white small line blinking in the upper left corner then it goes black, my monitor switches off and then nothing happens
I had the same problem trying to run 10.04 and 9.10
And I have had many different monitor so it is of course not that
I dont know why it wont work just that it dose not work, so will Ubuntu never work on this specific computer or will the next version work?
System Information
------------------
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100618-1621)
System Manufacturer: FUJITSU
System Model: ESPRIMO P1500
[Code].....
Hey I have a laptop thats being stubborn and refuses to boot the xubuntu live cd like it cannot read the disc, while it will boot a FreeDos live cd. I can put the xubuntu CD in while in freedos and view it in as the X directory, is there anyway that I can try and boot the live CD from the FreeDOS interface
View 2 Replies View RelatedI tried installing Ubuntu 9.10 on an older computer. I figured since it was not that powerful, I'd try running it from the Live CD to see if it was acceptably fast. Of course, I forgot that I had put in a pair of unformatted 40 GB hard drives, so the Live CD didn't like those because there were no file systems to access. So I figured I would just reboot and install it. One problem: my PC acted as if there were no CD in the drive. So I tried a Windows XP CD, but I got the same result.
I reset the configuration data in my BIOS and I set the drives up correctly in there, made sure the boot order was right, and all of that. I was wondering if anyone has experienced something like this before, and if there's anything I can do before I try replacing the CD-ROM drive with another one. Computer info: Gigabyte 7IXE4 mobo with Athlon 1.2 GHz, 512 MB RAM, 2x 40 GB Seagate Barracuda HDs, not sure what the video card is (I'll worry about that one when I get there)
I cannot get past the login screen. I tried entering through it but that fails, it keeps returning me to the login. Is there a generic login for the Live CD to test drive UBUNTU?
View 4 Replies View Related