how do i get a minimal slackware install with the kde desktop? i have this 3gig dvd iso but i don't know what to install i don't want all those bloated stuff in it any help?
View 2 RepliesI am running Slackware64 v13.0 with XMonad as my window manager and dzen2 as my status bar. Sometimes I do my Spanish homework on this computer, and I would like to know the best way to get accented characters and other symbols. Normally, in desktop environments or proprietary OSs, there is a window I can open to select certain special characters. I don't have any of that on this system, and I need to know if there is a simple, minimal program that displays special characters like this or if there is another way to use them easily. I would prefer something light and without many dependencies (just because I prefer simpler software), but I'm open to other solutions if something like this is not available.
View 7 Replies View RelatedI am trying to setup my HTPC. I wanted to have the most minimal overhead possible so I installed Ubuntu 10.10 server from the mini.iso and just added the ssh option. I then used the following command to give me a desktop environment because I will want to run firefox and it apparently requires this to run.
Here is the command that I ran:apt-get install xorg gnome-core gdm gnome-applets gnome-system-tools gnome-utils ubuntu-artwork compiz-gnome firefox sysv-rc-conf.The desktop works fine and I can open fire fox, however, the remote desktop is missing from the preferences menu.How can I install this? I would like to add the remote desktop option from a command line.
Due to some CD burning/reading problems with the laptop I'm installing to, the only install disk that I have been able to get to work is a MinimalCD disk.Unfortunately this only works if I don't ask it to install any extras at all, so I can install Ubuntu, but it is bare bones, and boots to a shell, no GUI or anything like that.What packages do I need to apt-get to bring this minimal install up to the standard Ubuntu install? Does anyone have a list of packages, or a site that will tell me which packages to install?
View 6 Replies View RelatedI'm running Ubuntu 7.04 server on a low spec spare machine ( 500MHz, 128 RAM) but fancy a change. Basically would like a non-GUI, command line only interface, running SSH, Samba and a flavor of FTP. FTP must be set up so users only have access to their home directory and not to any other system dirs. In addition I may want to incorporate anonymous ftp login at some point. Any recommendations for both FTP and minimal server software ?
View 7 Replies View RelatedI want to install CentOS with only 250 MB Space.How can I do that?
What package can I select?I have been challenged by Manager to wants me to restrict < 250 MB for just OS installation.
I noticed that in Fedora 15 Beta when you choose a minimal install then add ONLY the defaults of the "GNOME Desktop" package, you will get this error: gnome-desktop3-3.0.1-2.fc15.x86_64 has a required package:
system-backgrounds-gnome
When I look for gnome-desktop3-3.0.1-2.fc15.x86_64 it is not on any installation menu list. I prefer gnome, but installed KDE and that worked. Any ideas of getting gnome to work?
I want to know which packages from "x" set (slack 13,.1) have to be installed for X server to work. Requirements are really minimalistic. Only English language, no X development, no hardware acceleration, etc.
View 6 Replies View RelatedWhat happened to kde-core? I have two choices of bloat, kde-standard or kde-full. I don't want stuff like konqueror or kmail. I don't want Gwenview, Okular, or Ksnapshot. I don't care for all the media players. I don't need Kaddressbook or Korganizer. Is there a way to do a normal, minimalistic install without this stuff or am I screwed? I want to reinstall on my laptop and the boss' laptop and would prefer not to have the extras,
View 6 Replies View RelatedI am running Slackware64-13.1 on my laptop. I need to install skype on it. Searching this forum suggests that I install Alien Bob's multilib [URL] However, skype is the only 32-bit package I need and I will not need to compile any 32-bit software. So what is the minimal multilib install (the minimal set of 32-bit libraries) that make it possible for the 32-bit Skype to run on a 64-bit system? Will running
Code:
ldd /usr/bin/skype
on my 32-bit desktop machine provide me that minimal list of 32-bit packages? Also, will the installation of these libraries somehow interefere with the original 64-bit system?
Here is what I have gotten my install down to with these packages:[url]
Just looking for suggestions on what packages I can still remove that are unnecessary for having firefox, fluxbox, pcmanfm, lxterminal, etc
And, I keep getting the error that the locale is not set, reverting to C? but I did set locale or thought I did, how to fix that?
After a long time I tried ubuntu(9.10) again on my fileserver, I have some remarks; why does a minimal server installation include X/openoffice? I don't need document conversion on a fileserver and I bet a lot of people don't. Wouldn't it be better to create a new server package and leave minimal minimal? low memory installs (64mb) don't work unless you configure swap by hand in between things, 64mb ram is a lot in my eyes. I mean, not to be rude but if I wanted all this I could've better installed Solaris.
That said it's stable and running fine. Since it's my home fileserver I tried to convert my previously created raid10 mirror on an adaptec 1200 card to a softraid 5 solution. This is wat I did:
[Code]...
Tried to install Gnome after the minimal server (console based) install.I would like to install a graphical GUI now What to do? wich packages? tried zypper gnome-desktop (or something similar) but it wasn't enough.
View 3 Replies View Relatedi am trying to install Slackware 13.1 64bit on my HP Desktop. right now i am writing from a debian.
on the installation they ask me if i want to setup network right now.. when i press "yes" they need: name, domain, proxy etc... what is that things? :S slackware create new connection that i am going to pay extra? (pay extra money for that connection slackware create?) if i press "No" after the log in my network is not working..
my Questioni is: while i am complete the boxes on network setup (name,domain etc) slack creates new internet line that its going to pay? or not?
i have DSL Internet Acccess.
I just installed a minimal version of Ubuntu 10.10 (with Openbox) over 10.04. Mainly everything's ok, but I have three problems:
1. When shutting down or rebooting, my speakers make a loud pop. Upon googling around, I found this topic on the Arch forums. Running
Code:
Before rebooting/shutting down works. I, however, would like to have this permanently fixed so I don't have to run these commands every time before rebooting/shutting down.
2. I can't install the ATi video card drivers. I downloaded the correct driver (10.9) from the ATi website and made sure I had the packages found here installed. I also made it executable by running
Code:
When I run the installer, using
Code:
I get this output:
Code:
3. When booting, I get a message saying something like "intel_ips can't find i915 symbols, so graphics turbo is disabled". When googling for this, I see this is a kernel related issue. Since I don't have any understandings of kernels, I thought this is a little too high up for me. What does it mean and how can I fix it, as it slows my boot down quite a bit?
I am running Debian testing with KDE via KVM.
I love GNOME to pieces but I also enjoy KDE, and I decided to try Debian with KDE. It was a positive experience but a pain in the rear to set up. I installed KDE, and then had to manually remove most GTK packages, as I had installed KDE-full and was overloaded with KDE and GNOME apps.
I would like to do a minimal, CLI-only installation of Debian testing and then install KDE. My machine accesses internet via wireless, which I read the Debian installer does not support. I'm assuming I will have to go with a netinstall...?
Furthermore, once I attain this CLI-only environment, how difficult will it be to get my hands on KDE? A simple apt-get install kde-full ?
I use CentOS as a host for VMWare virtual machines. I like the CentOS install to be as minimal as possible. However, if I try to remove stuff I don't want at the install stage, the install invariably crashes. So I just accept the defaults, and it works fine.
So I would like to know the best way to get rid all the stuff I don't want (which is pretty well everything except Gnome, vi, samba and an email reader).
I am building a minimized 6.2.2 linux kernel using slackware on a dinosaur of a computer: AMD Athlon +1700 Single Core processor, 1gig of DDR SDRAM. This is my first time compiling a linux kernel, so before I make any major mistakes, I could use some help in determining which filesystems I absolutely must enable support for. Ext2 is allready in.
View 4 Replies View RelatedRecently I tried to install Debian 8.3 from *netinst.iso as a VM on VmWare Worksation 12. I try this in my office where there is a windows proxy set, for some security measures. During the installation in order to download updated and install additional packages I need to choose a mirror and then a proxy. I try to set the proxy but all I receive was an error. Decide to continue with the minimal installation and when the system start just to enter the proxy in etc/profile the reboot and I was thinking that everything will work just fine and I will be able to install everything I need. When I try apt-get install I receive a message Ign cdrom:// Debian ... Then to remove that error I edit /etc/apt/source.list but even then nothing happened when I try to use apt-get install. I receive and error message "Unable to locate the package.
View 5 Replies View RelatedI would like to know if there is a way to install Ubuntu 8.04 with a minimal configuration. Just the desktop and the important programs needed to run/update ubuntu. I'm asking this for my current problem found in this thread URL... hasn't been solved yet, and if the said problem doesn't get solved I would have to downgrade to 8.04 for this is the only version of ubuntu that works with the monitor described in the linked thread. Also, I would like to know if there is a way of installing fonts in 8.04 as easy as adding fonts to 10.04?
View 2 Replies View RelatedA few days ago I tried to install Ubuntu 11.04 minimal CD 64 bit PC (amd64, x86_64), from [URL], but couldn't. The reason is that none of the Ubuntu mirrors were accepted. I don't know if the problem is that the laptop isn't 64-bit, I'll list the specs, or what and I don't want to burned another disk without advice on what to do.
The laptop's specs are:
Processor: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 (2 CPUs), ~1.8GHz
Operating System: Windows Vista Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.101014-0432)
System Model: HP Pavilion dv6500 Notebook PC
BIOS: PhoenixBIOS 4.0 Release 6.1
I basically just want to be able to run XFree86 on one of my clients and have networking support. Does anyone know what packages I need to add in my ks.cfg to meet this requirement?
View 4 Replies View RelatedI have recently acquired a micro-sized-PC (A Dell FX130) which comes with a VIA C7 processor, 1GB RAM and 1GB onboard flash. The only application I need is a web-browser, I will use the FX130 to access a (very limited) number of web applications and to download/print-html-to-PDF - putting files onto a USB thumb-drive. I want to encrypt the disk to guard against tampering, and to run a restrictive firewall.
When I try to install the i386 debian-7.7.0 image - I run into the snag that it won't let me use guided configuration for the 1GB flash drive... and - when I guess at a sensible partitioning... I find that I run out of space during the standard installs. I note, however, that a whole bunch of significant applications (which I don't need) are being installed.
I am sure I'm missing something - is there an easy way to do a "minimal" GUI install that would make it easy to fit (just) a web browser (Chrome - ideally) and dependencies onto a 1GB bootable flash drive in a 'Debian-standard' fashion?
I want to install two Linux in my P.C. two partitions mounted to /(one for linux1 e one for linux 2). one partitions mounted to /home (for linux 1 e linux 2 the same time). Two partitions mounted to swap (one for linux1 e one for linux 2). One partitions for BackUP (with the size of 20gb). I have an HD of 80gb. My memory is 256mb. I want to know: The minimal size of swap. (i think that 300mb is enough) the minimum size of partitions mounted in / (will install a lot of programs in both). If i encrypt one partition, what is the difference? I can install two Desktops in the same O.S? I want to install minimum requirements, these programs that come in KDE or Gnome desktop, i don't wanna install they, i can remove from instalation from DVD? I can install Gnome and KDE in the Same time, from the instalation from DVD?
View 4 Replies View RelatedIs it possible to install the opensuse minimal using gnome/kde live cd or the DVD or with the netinstall?
View 8 Replies View RelatedI've been playing with Ubuntu for severla years, although I've been a casual user, always just installing from the live disc. I'm comfortable with apt-get, and not scared to format, reformat, get angry, calm down, reinstall, etc.
I'd like to upgrade my Dell Mini 9 netbook wti 9.10. one of my problems with 9.04 is space. with the standard install I'm using 3.7 of my 4 Gb of HD and want to try and streamline that. I've starting have problems upgrading my apps because of space to downlod the upgrade to.
I plan on formating and starting from scratch with the minimal CD (transfered to USB), but I want a clear recipe of steps.
Main goals:
- Standard gnome interface (not remix)
- Open office writer, calc, and impress
- Chromium
I know once I get started to type "cli" to install the basics, but then what? Many of the guides I've seen online are several years old. I can handle chromium and Open Office once I'm all up and running, but I don't want to install and then uninstall firefox, gimp, etc.
So I go to install the Minimal Ubuntu edition and get to the ethernet driver selection part and it can't figure out what driver I have (Odd since Ubuntu regular can).
View 8 Replies View RelatedI have a minimal lucid install to run XBMC with only xinit x11-xserver-utils installed no GUI. I'm trying to get my Logitech Dinovo Edge working via bluetooth. I've install bluez-utils and can do an hcitool dev and see my bluetooth dongle, and I if I use hcitool scan, and press the connect button on my keyboard, the keyboard shows up with it mac address. It won't connect at this point though, so I have to issue a sudo hidd --connec00:11:22:AA:BB:CC and get it to connect.Unfortunately, if I reboot or turn off the keyboard, it doesn't work again without SSHing in and redoing the steps above. Does anyone have an idea to get my keyboard working at startup?
View 2 Replies View RelatedI'm moving a homebrew arcade cabinet I have in my sitting room over from Gentoo to Ubuntu. Gentoo's served me well for a couple of years, but it refuses to recognise a touchscreen I recently installed on the cab, so I thought I'd give Ubuntu a try.
There is very little space on the SATA DOM inside the board in the cab, so I try and put as little OS on there as possible. To that end, I installed the minimal iso, and then apt-got X. I manually configured xorg.conf to make both monitors attached to the cab work, and I can enter X fine from the command line.
But what I need to do is have X start on powerup and automatically run my game. In Gentoo this is as simple as putting "xinit [GAME]" into /etc/init.d/local.start (the equivalent of rc.local). No login required, the prompt didn't even come up until I'd exited the game.
However, if I try and do this in Ubuntu, X can't find any devices, even though rc.local is at position 99. I've tried putting the lines in rc.local as well as manually update-rc.d-ing my own files, but no luck. X refuses to start until after the login.
So what seem to need is some way of automatically logging in as root on the command line, starting X, then running my game.
I recently downloaded the latest minimal Ubuntu ISO from the official download page.
Is it possible to do a minimal install if I do not have Ethernet capable internet?
I use one of those 3G (cellular) USB modems from companies like Verizon. Basically, it's a cell-phone, with the phone component taken out.
I did something similar with Debian recently, but I had to install the kernel along with the 'dpkg' package, to the HDD. From there, I had to reboot into the core system, install the packages like ppp, wvdial, etc, and then continue with a fresh install of the rest of the system.
There doesn't seem to be a way for me to either install the core files to HDD, or install the internet connectivity packages in the live environment for my modem.