I am running 64bit 10.04 (Lucid) with Kernel 2.6.32.24-generic and I keep finding that Ubuntu keeps booting to command line. I have found that by typing "startx" I am able to load up the GUI. Is there a way I can get it to start like this every time?I used to get the GUI login screen but I don't anymore. Is there a way I can change this?
View 5 Replies
[Background: GDM was using a blocky gray windows-like theme, regardless of appearance settings. I decided to try lightDM, but that was a disaster - booted to a black screen. I managed to get into a console to change the dm back to gdm, but now it always boots to command line and I can't figure out how to have it boot to gdm again.] After logging in to the command line, I can type 'sudo service gdm start' to get the desktop going. When going into grub, I just have the options (in brief)
Ubuntu
Ubuntu - recovery
memtest1
memtest2
I pick the first and it always boots to command line. What can I do to get it to boot into the gdm login screen again?
I'm running Ubuntu 10.10 with Lilo as my boot loader instead of Grub. I want to boot, temporarily, to a command line prompt instead of X-windows. How do I do this? Is there a combination of keys to press when the Lilo screen appears?
View 2 Replies View RelatedI just installed Ubuntu (10.10) via USB. Installation went perfectly, and then I installed videocard drivers. I restarded and from then when I boot, some kind of command line pops up and wants me to login from there. I did, and ive also looked at this thread: [URL] and tried to restart GNOME but didnt work
View 6 Replies View RelatedI installed an older version of gdm and created a new XR1196 directory in /usr/bin and now my computer only boots into command line...
I can get to the GUI using startx, but in doing so I lose all audio output, and the option to shutdown or reboot from both CairoDock and the default panel...
I wanted to be able to have a boot option to just use a command line with no X running at all. What I did was remove the gdm3 link in rc5.d . Then in /boot/grub/grug.cfg I made a new menuentry that is exactly the same as the default but I changed this line:
linux /boot/vmlinuz-2.6.32-5-686 root=UUID=3e926e70-cb92-4847-997c-37aabda532ff ro quiet to this line: linux /boot/vmlinuz-2.6.32-5-686 root=UUID=3e926e70-cb92-4847-997c-37aabda532ff ro 5
This worked. It gave me a command line interface with no X running.
My question is is this the recommended way in Debian? If not what is?
I have been using Linux for a very long time but I used mostly Slackware. I tried Redhat for awhile but really hated bluecruve, shows how long I have been using Linux. I have played with other distros but I always went back to Slack. But I really dislike KDE4 so Slack is no longer an option. KDE4 reminds me of a 12 year old girl that got a big box of makeup and had to use every bit of it. I now am using Debian on my laptop. And as aside I gave my 16 year old daughter a laptop for her birthday. She used the included version of windows 7 for awhile but then asked me what would be a good Linux distro for her. I showed her distrowatch and told her to look at the top distros. She then asked me to help her put on Debian. She loves it. She is a very good musician and song righter, She actually gets paid for doing that at 16, and really likes the programs in Linux to work with sound files. She also does MIDI stuff with our Yamaha Clavinova.
Now we are trying to do things the Debian way and it is a little different then other distros. So did I do the command line thing they way it's recommended in Debian. I have looked on line but all I could find was working in a shell and that is not what I was looking for.
I need to be able to boot into the command line, instead of booting automatically into the GUI. I have Red Hat 5, Fedora 12, and also a Suse 11 box that I would like to do this in.
In addition, once at the command line, is there any way to change the command line resolution and refresh rate. I know how to do this in the GUI, but would like to view different resolutions/refresh rates at the command line screen as well.
I recently had to reinstall openSUSE 11.2 on my computer...
specifications
nx 6120 laptop
512 Ram
1.77 ghz processor
and i think i have intel 915 graphics chipset or something....
but now to the point. i had to make a fresh install on my computer. Before that it was working fine. I used a live usb for the installation process. there no GUI came up but i used yast2 to install the live usb. installation went smoothly with no hiccups....i restarted the computer and selected open SUSE 11.2 in the boot menu.
but after booting it again comes to this dark screen with a lot green 'dones' and then finally at the bottom i have my login space....so no desktop.
i've gotten my fedora 12 to the point where i can run python3 scripts from command line and can call up python 2.6.2 idle with the command 'idle' from command line. what command will call up python3 (3.1.2 to be exact) idle?
View 5 Replies View RelatedI am trying to run Ubuntu from a live USB, everything seems to be great until I get to the part where the GUI should come up. Then I get this screen. It's a little hard to see, but it's basically a white bar at the top and black underneath. The black is flickering a lot and the flickering can stay for a short while (30-120 seconds) even after I have rebooted into windows. Sometimes the bar at the top is another solid color (purple,blue, orange, usually white though), I think it is putting my monitor in a strange version of it's self test.
When it is unplugged the monitor while cycle through full screens of different colors. I have tried Ubuntu 10.10 Desktop AMD64, 10.10 i386, and the latest Fedora to see if another distro had different results. I have also tried 2 other USB drives. I am using Universal USB Installer 1.8.0.8 to make the drives. My own searches have found some problems with graphic drivers for the GeForce 8800 GTX, but they a bit dated. I have tried adding vga=vesa to the boot arguments, I am not sure if I did it right or not, but it resulted in a black screen with a blinking line instead and no flickering.
System specs:
AMD Phenom II 740BE (unlocked to Quad Core @ 3.4Ghz)
ASRock Extreme3 870
WD Caviar Black 640GB 7200RPM 6.0Gb/s
GSkill 4GB PC1600
GeForce 8800 GTX
Dell 3007WFP
just tried downloading the latest version of ubuntu and install it on my laptop got an error message at the end of the installation (an I/O error, dev sr0,sector something) now when booting i got grub rescue. the only command working are ls and set. commands such as 'linux' or 'boot' show 'unkown command'
typing
ls (hd0,1) or ls /boot/
results in
unknown filesystem
I tried to reinstall grub using the 3 different methods as in [URL] got no error message while doing so except when typing sudo grub-install --recheck /dev/sda it told me something about being unable to locate ubuntu or something along those lines - sorry i thought i'd remember .. running out of option is there a possibility to download the latest pre 10.04 stable version?
So I just partitioned my hard-drive, one side with windows the other to set free for ubuntu. It all worked fine. I put in the liveCD of ubuntu 9.10 and installed on to the partition. However, I have a problem. When it boots up it asks me to either boot into linux 2.6 or windows 7. Windows 7 works fine, but when I boot into ubuntu, the loading screen comes up and then it doesn't seem to boot into GDM. It's all command-line interface. I've tried sudo apt-get update and upgrade, but it isn't connected to my network yet so I can't do that. What can I do?
View 9 Replies View RelatedI just installed a fresh install of 9.10 on my amd64. when it starts it locks up right away. i know that this has to do with my nvidia card. i've had to do this in the past. but since it locks up i have no way to get into the command line. ctl-alt-F1 does not work. is there a way to just have it boot right to the command line without loading up gdm?
View 1 Replies View RelatedI clicked on the upgrade to LTS 10.04 option on my Asus 901 EEE PC and after completion it will only boot straight to command line...I would like to get back to the UNR Gui.
View 2 Replies View RelatedJust installed Lucid from CD ROM. I have 2 HDDs. When the install screen came to ask about partitions, it didn't seem to want me to install it onto the same HDD as my XP/Ubuntu 9.10 partitions, so I installed it onto my other HDD. After it finished, I restarted and it appeared on GRUB. It takes me to a command line where it asks me for my desktop login and then my password.
It allows me to type in my login, but the password isn't so easy. It won't let me type it in. It's as if the keyboard stops working apart from the return key. I have no understanding of command line. As soon as I'd entered my password, it went on to tell me that there were no packages to install, and then stayed on command line as if I'd just opened a terminal. How would I get it to take me to my desktop?
I've installed Karmimc Koala server edition, and I wanted the gui so I followed advice on a forum and did an apt get install gnome desktop etc. but don't know what to do next, all I see is a command line, no gui. I would even settle for just having web min so I could control my server from that, as I have read that servers are more vulnerable with a gui.....and my last ubuntu server got hacked, so I had to wipe out the hard drive and start all over.
View 3 Replies View RelatedI had problems with python stuff and so update manager did not work. Also many other problems, PiTiVi was installed but did not start eg... After many trials of this and that I removed python-gtk2 and so also ubuntu desktop. But was unable to get it back. Now I cannot even shut down. While it is not possible to install desktop or anything else, would it be possible to fix this by upgrading the whole system to 10.04 (10.10?)? Would it fix python installation. How could I do it. Some info tells to change sources.list and run apt-get upgrade, but some tell not to do so.
t@t:~$ update-manager
Traceback (most recent call last):
File "/usr/bin/update-manager", line 26, in <module>
[code]....
I have just installed ubuntu 10.04 via a netboot install.When my system reboots I only have the command line - no gui. Could someone kindly inform me what command I need to run in order to get a GUI
View 3 Replies View RelatedMy computer is a netbook with no optical drive. I had a friend bring over an external CD drive to burn the live CD, but I don't have that now. Since then, I've messed up my install beyond easy repair, so I was wondering if there was a simple (or perhaps not so simple) command that would reinstall every package from the software repositories (I do have access to the Internet, just no GUI). I'm talking about a clean install here.
View 3 Replies View RelatedKeep getting alert notification box, with close button. But get no response from keyboard or mouse. So I can't get past it. It seems that you do not have the hardware required to run Unity. Please choose Ubuntu Classic at the login screen and you will be using the traditional environment. (Late model Dell, probably less than 2 years old.) But since I can't use the mouse to activate the close button, or use the keyboard (alt + x, or enter), I can't get past that point. Is there some control sequence I can use during boot startup and get to single user mode and modify something?
View 8 Replies View RelatedI did a dist-upgrade this morning, and now every time I boot, it only goes to the command line login prompt.
Attempting to stop and restart gdm does nothing besides make the screen shake for a second, and I've installed all available video drivers from Available Drivers, and the ones from nvidia's website.
I am, however, able to boot into recovery mode and then select failsafe graphics mode, and get into the desktop.
Any ideas how I can get my normal boot to work?
i am trying to install upgrades for my ubuntu server via webmin, and i put in the command apt-get install imagemagick and when i do that i see the output and it asks me if i want to install, is there a command that will automatically force the installation so that way i dont have to hit yes or Y?
View 2 Replies View RelatedHow to installing ubuntu 9.10 server in command line mode?
View 1 Replies View RelatedI'm having problems with my Nvidia card. X doesn't work after installation (9.10), only command prompt. I've read the instructions at http://www.psychocats.net/ubuntu/nvidia on how to enable Nvidia drivers, but the instructions are only for GUI, which I don't have.
Anyone knows how to enable Nvidia drivers from command line ?
How to upgrade to lucid beta2 from the command line. When I try 'sudo do-release-upgrade' I get this:
Checking for a new ubuntu release
Done Upgrade tool signature
Done Upgrade tool
[100%] 86.3kB/s 0s
Reading cache
Checking package manager
Reading package lists: Done
Reading state information: Done
Reading state information: Done
Reading state information: Done
Done downloading
Reading package lists: Done
Reading state information: Done
Reading state information: Done
Reading state information: Done
Updating repository information
WARNING: Failed to read mirror file
Third party sources disabled
Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager.
Done downloading
Checking package manager
Reading package lists: Doneucid/main Packages: 90 ed Packages: 77
Reading state information: Done
Calculating the changes
Calculating the changes
Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade:
E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the
'update-manager' package and include the files in
/var/log/dist-upgrade/ in the bug report.
Restoring original system state
Aborting
Reading package lists: Donem lucid-updates/restricted Packages: 94
Reading state information: Done
Reading state information: Done
Reading state information: Done
The first 2 don't apply as I'm on 9.10. I can't really remember if I have installed any unofficial software packages.
I just installed Windows 7 and it erased my Grub bootloader. I followed this tutorial: URL...And now when my computer starts up it goes to the Grub prompt: Code: grub>I guess I did not do the right partition but I'm having a lot of trouble getting it back to how it was where my computer at least loaded the Windows 7 loader.
View 1 Replies View RelatedI have the suspicion that the latest gdm update (2.28.1-0ubuntu2.2) broke something because the login screen isn't displayed anymore on my desktop. My question is the following:How can I revert an update or force a package version via command line? It's pretty straight forward via Synaptic but I only have access to the recovery command line so that is not really an option.
View 1 Replies View RelatedIs there a complete mirror list you can choose from the command line. There is good way doing it from Administration > Software Sources. However.. if you don't have X.. is there an easy way to choose between different sources(mirrors) without editing the sources.lst manually, but choosing for example main mirror or some other faster one let's say in your region?
View 3 Replies View RelatedI made a live USB memory stick / pendrive with Ubuntu netbook remix 10.04 using my desktop computer. I want to install / update my netbook that has no network function yet. I booted the desktop with the pendrive & ran update manager. I want to update the kernel so I will have the driver that will operate my netbook ethernet.Acer AOD260 has Ethernet Controller: AR8151 v1.1 Fast Ethernet, Atheros Communications & Network Controller: Broadcom 4727 (rev 01)and will not work from the current release of 10.04 (too new) but there are supposed to be drivers in the newer kernels.
Running Update Manager I get a box labeled "Debconf on ubuntu" & says "Configuring grub-pc". There is an entry box that says "linux command line:" & is empty. When I press the help button I get the message "The following Linux command line was extracted from /etc/default/grub of the 'kopt' parameter in GRUB Legacy's menu.lst. Please verify that is correct, and modify it if necessary.The installer is hanging, Preconfiguring packages ..., probably waiting for a response, but I have no idea what to do.
I recently updated, and now when I boot it only goes as far as grub command line. There is no grub menu. The computer is a Dell Inspiron 8600 laptop with only Ubuntu installed -- no dual boot, no weird partition schemes. Originally installed Ubuntu 09.04 on this computer, upgraded a couple times and it currently has (had) 10.04.1 LTS running. The update should have upgraded from kernel 2.6.32-23 to 2.6.32-24. I can boot with a live CD and mount the hard drive. The drive seems fine, so it appears to be simply a grub config issue. I have to boot with live cd to get online to check for potential solutions. So I'm taking some notes on how to use grub.
View 4 Replies View Related
