I need to be able to boot into the command line, instead of booting automatically into the GUI. I have Red Hat 5, Fedora 12, and also a Suse 11 box that I would like to do this in.
In addition, once at the command line, is there any way to change the command line resolution and refresh rate. I know how to do this in the GUI, but would like to view different resolutions/refresh rates at the command line screen as well.
I installed an older version of gdm and created a new XR1196 directory in /usr/bin and now my computer only boots into command line...
I can get to the GUI using startx, but in doing so I lose all audio output, and the option to shutdown or reboot from both CairoDock and the default panel...
I have a number of computers which I do some distro hopping with now and again. Each time I manually configure GNOME to my liking.Ideally I want to create a script to do this (to stop me having to manually click around each time) but I can't find any information on this. I'm happy using sed to add/replace text in files if I could just find whichfiles need editing.o get me started, what file is edited when I add/remove a panel (or item in the panel) in GNOME
View 3 Replies View RelatedI am trying to install gnome from command line on red hat
View 2 Replies View RelatedI recently replaced (fresh install) Fedora 12 by 13. Surprisingly I noticed there is no log-in sound for Gnome and also when I use command line terminal there is no terminal bell in spite of the fact that I checked the "Terminal Bell" option in the EDIT --> Preferences menu! I checked the speakers are not mute, I can play music. Any idea how to fix it?
View 2 Replies View RelatedI'm studying Information Technology and doing Linux as part of it. One of the questions in my text book is: Describe three different ways to start a command line interpreter when using the Gnome desktop of openSUSE Linux. I can't for the life of me make sense out of it.
View 8 Replies View RelatedI have a virtual machine with SUSE Linux Entperise 10 SP2 (I586) installed. However, the default setting is using command line based interface.
Is it possible to change it to be GNOME or KDE based interface ?
[Background: GDM was using a blocky gray windows-like theme, regardless of appearance settings. I decided to try lightDM, but that was a disaster - booted to a black screen. I managed to get into a console to change the dm back to gdm, but now it always boots to command line and I can't figure out how to have it boot to gdm again.] After logging in to the command line, I can type 'sudo service gdm start' to get the desktop going. When going into grub, I just have the options (in brief)
Ubuntu
Ubuntu - recovery
memtest1
memtest2
I pick the first and it always boots to command line. What can I do to get it to boot into the gdm login screen again?
how to pass something more than a one-command startup for gnome-terminal. I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
[code]....
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I am trying to learn how to pass more than a one-command startup for gnome-terminal.
I will give an example of what I'm trying to do here:
Code:
#! /bin/bash
#
#TODO write this for gnome and xterm
USAGE="
${0##*/} [-x] [-g]
code....
However, running with the -g option to invoke gnome-terminal, I get a "There was an error creating the child process for this terminal" error.
This same error occurs if the gnome-terminal line is changed to
Code:
gnome-terminal -e mcTerm
Is there any way to pass more than one command on to gnome-terminal? I have tried various single and double quoting senarios and in a final attempt, I abstracted to an exported function all to no avail. Perhaps even though gnome-term is better at many things than xterm, xterm trumps it in this instance.
I wanted to be able to have a boot option to just use a command line with no X running at all. What I did was remove the gdm3 link in rc5.d . Then in /boot/grub/grug.cfg I made a new menuentry that is exactly the same as the default but I changed this line:
linux /boot/vmlinuz-2.6.32-5-686 root=UUID=3e926e70-cb92-4847-997c-37aabda532ff ro quiet to this line: linux /boot/vmlinuz-2.6.32-5-686 root=UUID=3e926e70-cb92-4847-997c-37aabda532ff ro 5
This worked. It gave me a command line interface with no X running.
My question is is this the recommended way in Debian? If not what is?
I have been using Linux for a very long time but I used mostly Slackware. I tried Redhat for awhile but really hated bluecruve, shows how long I have been using Linux. I have played with other distros but I always went back to Slack. But I really dislike KDE4 so Slack is no longer an option. KDE4 reminds me of a 12 year old girl that got a big box of makeup and had to use every bit of it. I now am using Debian on my laptop. And as aside I gave my 16 year old daughter a laptop for her birthday. She used the included version of windows 7 for awhile but then asked me what would be a good Linux distro for her. I showed her distrowatch and told her to look at the top distros. She then asked me to help her put on Debian. She loves it. She is a very good musician and song righter, She actually gets paid for doing that at 16, and really likes the programs in Linux to work with sound files. She also does MIDI stuff with our Yamaha Clavinova.
Now we are trying to do things the Debian way and it is a little different then other distros. So did I do the command line thing they way it's recommended in Debian. I have looked on line but all I could find was working in a shell and that is not what I was looking for.
I am running 64bit 10.04 (Lucid) with Kernel 2.6.32.24-generic and I keep finding that Ubuntu keeps booting to command line. I have found that by typing "startx" I am able to load up the GUI. Is there a way I can get it to start like this every time?I used to get the GUI login screen but I don't anymore. Is there a way I can change this?
View 5 Replies View RelatedI'm running Ubuntu 10.10 with Lilo as my boot loader instead of Grub. I want to boot, temporarily, to a command line prompt instead of X-windows. How do I do this? Is there a combination of keys to press when the Lilo screen appears?
View 2 Replies View RelatedI just installed Ubuntu (10.10) via USB. Installation went perfectly, and then I installed videocard drivers. I restarded and from then when I boot, some kind of command line pops up and wants me to login from there. I did, and ive also looked at this thread: [URL] and tried to restart GNOME but didnt work
View 6 Replies View RelatedI recently had to reinstall openSUSE 11.2 on my computer...
specifications
nx 6120 laptop
512 Ram
1.77 ghz processor
and i think i have intel 915 graphics chipset or something....
but now to the point. i had to make a fresh install on my computer. Before that it was working fine. I used a live usb for the installation process. there no GUI came up but i used yast2 to install the live usb. installation went smoothly with no hiccups....i restarted the computer and selected open SUSE 11.2 in the boot menu.
but after booting it again comes to this dark screen with a lot green 'dones' and then finally at the bottom i have my login space....so no desktop.
I would like to make all of the computers in our lab look/behave the same. I have messed around with some of gconftool-2 to change the desktop backgrounds, but I can't figure out the following:deleting the bottom paneladding the window list to the top paneladding the force-quite applet to the top panelremoving all menu items from the system/preferences menu but soundremoving all menu items from the system/administration menu but printing and system monitor
View 1 Replies View RelatedIt's a new install on a laptop, it looks like it installs fine, however after a boot I get login & password prompt and command line. I did choose GNOME desktop during the install.I know I will have problems to get 1080p resolution with my Intel integrated card Ironlake but at least I expect to have GNOME with min resolution 800x600.
View 5 Replies View RelatedI add a "command line" or "mini-commander" applet to the panel in gnome, but nothing happens.
If I launch "/usr/lib/mini_commander_applet" on a terminal, I get a dozen such applets, for all the times I tried, but then I have an xterm tied up.
If I launch the same from "alt-f2" it does not work, and gives no error.
Carlos E. R. (from 11.2 x86_64 "Emerald" at Telcontar)
Is there a way to reposition the Gnome panels from the command line?
View 9 Replies View RelatedIs there a way I can configure gnome-panel with the command line? I want to be able to write a shell script to switch between my AWN desktop setup and my gnome-panel one.
Also (this is less important) is there an easy way to switch between Gnome and KDE? I would assume no, but if there is that would be cool.
I have an Acer Aspire 5100 with Ubuntu 10.04 running. Recently I loaded from a storage drive all of my music library which happens to be in its orignal wav format. I was going to convert it to mp3 using lame or some other program. I worked with the files using the command line with some success. The files were there when I did this. No problem. I came back to the computer after several days absence and when I got to a commandline I entered "ls -l" no files. Yes I went to the right directory. I logged in as Root no help. The files are not there according to the command line as far as I can tell.Using Gnome the files are available and playable via the desktop. Are the files there or not?
View 12 Replies View RelatedI've just added an application to load on startup in gnome.At first gnome loads properly,but after few seconds that application starts automatically and I can see its icon on taskbar , then gnome freezes and I can't do anything in gui.
How I can remove that application from starup of gnome using command line?
I'm wanting to be able to run the Open Suse start menu from the command line.king remotely, I have found that I have faster response time by only running specific X components instead of an entire desktop (particularly useful under Windows 7 Cygwin). Specifically, I'd like to invoke the start menu from a ssh command line.On Linux Mint,line command is:mintmenuWhat is the equivalent command to bring up the Slab Start Menu on Open Suse?
View 8 Replies View RelatedIs there a way to control the gnome sound preferences widget via the command line? I use optical digital out (IEC95. It works fine. but everytime I reboot there is no sound, I have to go to sound preferences, hardware tab, select my internal audio device, change it from digital stereo duplex to analog surround 5.1, then back to digital stereo duplex, and then the sound works again. I would like to be able to do this via command line so I can write a little startup script and not have to do that every time i reboot.
View 4 Replies View RelatedI'm trying to create a liveCD/USB for use of myself and my family. The idea is to set up the LiveCD to look like their used to seeing it. I know I can just copy the homedirectory but I wanted to do it via script so new user accounts could also have the common bells and whistles we use.So really I have two questions.1. Is it possible to add programs to the Gnome Tool Bar from command line? aka via a script2. Is it possible to modify the default panel template so new users get my changes?
View 1 Replies View Relateddebian 8 64bit
gnome classical gui
user is dd
psswd is word
adm psswd is adword
unlock crypt psswd is crypto
This is how I start debian. I can choose between debian gnulinux and advanced options. I select debian.
Then 'please unlock crypt' shoIws. I enter 'crypto'.
Then debian gui login screen shows. I enter 'dd' and 'word'.
Debian 8 gnome classical starts.
Can I login to debian 8 gnome classical by entering 'dd' and 'word' in a command line?
I do not want to login by debian gui login screen. But by command line.
If I select advanced options. Then recovery mode, I can get a command line. If I can login there, then I do not know how to.
I've got an install of CentOS 5.3 in a VM which was installed without X or Gnome.I've added X (yum groupinstall 'X Window System') and Gnome (yum groupinstall 'GNOME Desktop Environment) and can now run startx no problem.However on boot I get a command line login rather than the graphical login screen one normally gets if Gnome is included at install time.What do I need to do to get the graphical login after boot?
View 3 Replies View RelatedI'd like show a certain line or lines of a file with context, kind of like a unified diff, on the command line in Linux:
$ (something) -l 154 stuff.py
150: def foo(bar):
151: """
[code]....
How can I print Linux command line history without including the line numbers? I want to send it all to a text file like this:history >> history.txt
View 1 Replies View Relatedso the safest way to go about this is to assume I know nothing. I mean, I have a rough Idea of what a kernel is, no idea what a shell is, etc. I do consider myself computer savvy, but know NOTHING about linux and thats why I'm Diving in, hopefully not too much, this is just to give you an idea of what we're working with here.
After several install attempts I kept getting a blank screen. Whether it be black,white, or the default gnome desktop (without any icons, and simple things like ctrl+alt+backspace just doesn't work, or anything else for that matter) I was ending up with a blank screen. Driver for moniter....maybe....but I did succesfully install it once, and it worked like a charm...shutdown properly, and the next day after work...Boom, same thing after startup.today I started from scratch and re-installed....samething, until I hit the power button, went from the dvd(iso) and did a fail safe, now my resolution is much better than it was the first time..Actual questions.....what did I do to fix it when failsafe never worked before?
Is there a way to save these settings, so I don't run into the problem again, because I don't even want to turn of my computer at this point?If i'm trying to dive in and learn the command line actions, is there any substancial difference between gnome terminal or hitting "c" to bring up the command line?