I'm trying to upgrade a remote Ubuntu 8.04 server to a newer release. Following some tutorials, I tried:
root@linux18:/etc/apt# lsb_release -a
No LSB modules are available.
Distributor ID:Ubuntu
Description:Ubuntu 8.04.4 LTS
[code]....
I'm a pretty new ubuntu user and I've just upgraded from 10.10. It seems to be working pretty well, except that I can't figure out how to connect to the Internet. When I click the wireless icon to try to connect, the drop down menu is as follows:
Wired network (grey/unclickable)
Disconnected (grey)
JackET N8 (grey)
Disconnected (grey)
3 Internet (white/clickable)
[Code]...
Loss of internet connection after upgrade from 8.04 to 8.10 Like the title says, I lost my internet connection after upgrading my Ubuntu system from 8.04 to 8.10.I used the downloaded automated method. It appeared to work fine on its initial reboot into 8.10. But I noticed the internet icon indicated loss of connection. Even so, I was still able to browse the net through Firefox. But then when I rebooted the next day the opposite was true: the connection icon indicated connection, but Firefox would not actually connect, nor would update manager. It has been like this since. This is a dual boot machine, and the Windows XP Pro side still connects to the internet as usual, no problems.So how can I make my new 8.10 system connect to the internet?
I use a Motorola SB4200 cable modem
[code]....
I upgraded to ubuntu 10.04 lts yesterday. The upgrade went smoothly. but now I have a very slow internet connection. It is as if I am on a dial up when I have a broadband speed of 20 MB. What can I do to fix or perhaps roll-back the installation to the previous proper working state.
View 3 Replies View RelatedI use the CD upgrade method to upgrade my kubuntu 10.04 to 10.10.Not to mention,the ISO image of the CD is this one :kubuntu-10.10-alternate-i386.iso.At the first run I choose YES for the prompt asking for internet connection or whatever, but I immediately realise that I have chosen a wrong option, so I exit and restart the upgrade all over again.On the second run, I choose NO for the prompt , then the installation continues until it reaches the 'fetching files' stage. It pops up and says "The upgrade has aborted. Please check your internet connection or installation media and try again. All files downloaded so far are kept."
I don't want to reinstall the whole system again because I want my applications;I don't want to use the updater to upgrade because I have a low internet speed .
Can I upgrade from Fedora 9 to fedora 10 from a wireless connection? What I want is to upgrade without using a cd or usb device. I would like to use yum or packagekit. Can it be done? I just don't have any device or cd/dvd with me.
View 1 Replies View RelatedI had clicked on the upgrade notification in Update Manager. After 3 hours of downloading, it stopped abruptly. Now when I try, I get a message saying could not download, check internet connection. I am able to visit other sites, and am actually downloading the CD itself without any problem.
View 2 Replies View RelatedI keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
NOTE: My upgrade wasn't smooth. Now everything is extremely slow. However if I boot from the disc to try without installing, the connection problem is still there. There is an exclamation mark on the connection applet, right clicking shows that Enable Wireless is unchecked and unclickable. I've included outputs of common network commands which might prove to be useful.
Code:
[~] ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:33:60:f0:3c
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
[Code]...
Just updated to 11.04 Natty Narwhal on my Dell Inspiron 1501 this morning and I bumped into a problem. The DSL connection I used to connect to before the update doesn't work anymore. When I was running 10.10 I had this DSL connection set up via Network Manager (right-click on the network notification area=>edit connection=>add new, using PPPoE method and user name and pass from the ISP). Now I still get the AutoEth1 connection that is created (automatically), but when I try to connect to the DSL connection, it just doesn't connect. I tried deleting the connection and creating a new one, then rebooting, but still cannot connect. Another problem is that first time I ran 11.04, after beeing prompted to reboot at the end of the upgrade, I had my wireless on and while I was trying to get the DSL connection to work I switched it off (Fn+F2). Now if I try to turn it on again, it won't start. The network manager applet is looking also different now, wheter I left-click or right-click on it is the same (used to be different in previous releases), and this makes me even more confused.
I know I probably shouldn't have rushed into upgrading without getting aquainted with the changes and the possible issues, but to be honest I wouldn't want to downgrade now to 10.10 (unity looks kind of interesting and I am looking forward to see it improved in the future) and I really need to fix this DSL connection problem on my laptop (using my desktop now)
i have a wired connection thru a netgear router wgr614, i am running a window machine fine , but ubuntu machine say no connection . i have look around seems to be a common problem . but no simple fix . Network manager is bad , do i uninstall or change thru terminal or .....
View 12 Replies View RelatedWhile upgrading to a newer version of Ubuntu I noticed a warning saying that the installation/upgrade should not be interupted. Unfortunately though, during this process my computer froze up and I had to shut it down. Ubuntu no longer starts on my computer. I still have Windows though, which is what I'm using now.
View 3 Replies View RelatedI've got an old Compaq Armada E500 laptop (850mhz PIII, 512mb RAM, 30GB HD) that I've been running OpenSUSE 11.1 w/Gnome desktop. My wireless adapter (Linksys Wireless-G, model WPC54G ver. 2 w/acx-111 chipset) worked well with this setup, but no that I've upgraded to OpenSUSE 11.2 w/KDE, I've got to start all over. I tried doing what I did before, which was to copy the firmware file into /lib/firmware.
View 9 Replies View RelatedI am trying to upgrade from 9.10 to 10.04 beta. I tried ALT-F2 & ``update - manager -d'' but when Upate Manager opened, it did not give me the option of upgrading to 10.04 beta.
View 2 Replies View RelatedI'm running 10.04 and for several days now I get two packages that are grayed out and do not upgrade in upgrade-manager.
If I use the shell and apt-get I get the following message: The following packages have been kept back: firefox-gnome-support update-manager
The system is functioning well, but these 2 packages just linger as I process probably hundreds of lucid upgraded packages.
I tried to upgrade ubuntu from 9.10 to 10.04. It is almost complete downloading packages,but i get this error:Failed to fetch http://archive.ubuntu.com/ubuntu/poo...untu2_i386.deb The HTTP server sent an invalid Content-Range header [IP: 91.189.88.30 80]I tried to change from main server to US server, but I still get this error.
View 1 Replies View RelatedI have an odd problem in that my wireless connection is okay until I close the laptop. When I open it back up, I'm unable to reconnect. This problem first occurred after upgrading to 9.10. I can reconnect after restarting. I tried several things before breaking down and reinstalling 9.04. After installing 9.04, everything works great. Any suggestions on what is going on before I try upgrading to 9.10 again? I have a Dell D600.
View 8 Replies View RelatedSince I upgrade to Ubuntu 10.04 my wireless connection is very unstable. I install the needed wireless drivers from 'Hardware Drivers' (Broadcom STA wireless driver) and I got wireless connection, but it randomly disconnect, and also connection is very slow.
I think that the problem are the drivers which are not very compatible with this version of Ubuntu, which means we need to wait for update? I have HP ProBook 4510s laptop, Intel PRO/Wireless 5100 AGN network card & Gembird NSW-R2 router. I'm only having this problem on Ubuntu 10.04, on other OS's the internet is fine.
I am begining on Ubuntu Server Management I would like to receive your on this doubt In order to have my Ubuntu Server up to date and with the last security patches, is it enough to do:
sudo apt-get update
sudo apt-get upgrade?
If not, please where I can find an easy guide in order to keep or mantain my server OK? Also, what are the risks when we do: sudo apt-get dist-upgrade?
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
When I tried to upgrade to Ubuntu 10.10 using commandsudo apt-get dist-upgrade the following error is thrown:Setting up netbase (4.35ubuntu3) Installing new version of config file /etc/services.
[Code]...
I am trying to upgrade from 10.4 to 10.10. I have never had a problem upgrading before with the Update Manager. Now I get an error message when using the Update Manager. The message says, "Could not calculate the upgrade". See screenshots. I also checked the package manager for broken packages and came up with nothing.
View 2 Replies View RelatedI'm running Ubuntu 10.10 and 2.6.35-27-generic. When I run the Upgrade Manager, the 'Distribution Upgrade' window pops up and in bold letters reads 'Running partial upgrade'.
The next line reads '>Preparing to upgrade' and sits there. Mean while, the process begins to perform a great deal of constant hard drive activity. The window's horizontal activity bar reads 'Calculating the changes' at the bottom of the 'Distribution Upgrade' window.
I have a Dell Mini 9 with a Broadcom wireless adapter. I've had it working for months on Debian Sid, but recently I updated the entire OS to get KDE 4.4 (I also went from a 2.6.30 to a 2.6.32 kernel). Something in that upgrade caused wireless to cease to work properly. The problem is similar to the one described in this thread, but no resolution is mentioned there: viewtopic.php?f=5&t=50892 I've gone through all the steps to install the STA drivers/wl module for it, and it basically appears to be working. Using wicd, I can see all the wireless networks in the area.
The problem occurs when trying to connect. When I try to connect to my WPA wireless network, it eventually fails claiming a bad password. When I turned the wireless network into an unsecured network, it eventually fails claiming it's unable to get an IP. I've also tried at the command line with wpa_supplicant and it initially appears to work but in fact it hasn't. I've also got Kubuntu 10.04 installed on this machine, and it can connect without issue (using the proprietary driver that Ubuntu's hardware driver manager allows one to use).Does anyone know what has caused this? I even tried the earlier kernel, so that's not it.
Wifi network operated perfectly with f13. Upgrading f13 to f14 did not show any problems except for networking. It seems that the wlan0-link is not ready. Consequently no network information about adresses can be obtained. Tried with network tools to activate wlan0. No reaction Tried to deactivate Networkmanager and bring network up with
service NetworkManager stop
ifconfig -a
Then
ifconfig wlan0 up
dhclient wlan0
No reaction on network. The NetworkManager icon disappears which is understandable.
After having updated unconditionally all packages in Kde-desktop-factory-repository to get the latest version 4.4.4, I can no longer connect to the Internet through Knetworkmanager. I receive the the following message from a pop-up window when clicking on the Knetworkmanager icon
Code: KNetworkManager cannot start because the installation is misconfigured.System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution.KNetworkManager will not start automatically in future.I tried opening Knetworkmanager in a terminal as root user through 'su' but received the following message:
Code:# knetworkmanager knetworkmanager(2331): KUniqueApplication: Cannot find the D-Bus session server:"Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken."
Ok, so I upgraded my acer aspire one to the new Ubuntu 10, and at first everything was working fine, except the audio. Now, for some reason, my wireless and ethernet ports have died. I can't get online by either method. I can do ifconfig <device> up and it will show up if i do iwconfig or ifconfig, but the wireless isn't associated with the AP. Currently I'm trying to load some drivers for my atheros card, and we'll see how that works outReally I was wondering, how come the modules don't load at boot time, and how can I fix this? I've been a Linux user for quite sometime, however I've been more of end user
View 1 Replies View RelatedI'm trying to upgrade from 9.10 to 10.04 LTS I've followed [URL] Everything is updated. But, i don't receive the message "New Ubuntu release..." Will I have to download the entire DVD?
View 7 Replies View RelatedI would like to install 10.10 preferably right now.But I'm having issues, dist-upgrade won't upgrade me for 10.04 to 10.10.I tried to go into my Update Manager, but it's not recognizing any new Ubuntu versions.I don't particularly want to wipe my system, so what should i do?
View 4 Replies View RelatedI tried to upgrade from Fedora 8 to Fedora 12, but after preupgrade got everything ready I rebooted. Anaconda searched for storage devices and then said "No upgrade root found". What can i do to continue the upgrade manually?
View 1 Replies View Related