I want to dual boot windows xp and mandriva. I have mandriva on my asus eeepc 1101ha now, and there is a spare partition. I have a windows iso(dont worry i have the real product key, i just deleted the recovery partition and cant reinstall windows from that). I cant buy an external cd drive right now, so my only option is to boot from usb. How do i make the iso bootable from usb?
View 5 RepliesI have Ubuntu 10.04. I used a Gparted live cd to partition it and installed Mandriva spring 2010 in unallocated space. It works fine but I can't get back to Ubuntu. How do I do it?
View 5 Replies View RelatedI recently made the move from windows to Linux and I am happy to having got rid off all the MS stuff. Trying out a few distros I decided on using Ubuntu and Mandriva (wife likes the flashier stuff, what can I say ).
My question is how can I partition my hard disk in such a way that my /home is separate from both the Ubuntu and Mandriva part but accessed by both as my default home folder.
Does anyone have any experience installing Mandriva to a dedicated partition, and configuring it for use with Grub2?
View 9 Replies View RelatedI have used ubuntu for som years now, I thought It could be nice to try a kde focused linux distro, so I installed mandriva spring.
The problem is that only the ubuntu LTS boots, and the mandriva part just stops after (and I don't know where to start, and what is relevant to write)
I would like to dual boot mepis 8.5 and mandriva 2010.1. How do I set up my partitions and how do I install the distros so I can go from one to the other. I have a 40GB hard drive, which has been wiped clean.
View 4 Replies View RelatedI had a dual boot machine with fedora 12 and windows vista and I could use grub boot-loader to switch between two. Few days ago windows got corrupt and I have to reinstall it. I put windows 7 now and as usual it erased grub. So to reinstall I put the fedora 12 installation CD on and followed some usual setup steps. When I got the command line I issued the command "grub-install /dev/sda" (sda not hda because It showed bunch of sda, sda1..) but surprisingly it said grub command not found. I remember doing it before while it worked fine.
View 4 Replies View RelatedI had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.This is my boot script output:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in [code].......
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
In some spooky way I managed to install Mandriva and have windows in all its flavours in working order, however Suse is still a challenge too far. I have one partition to spare, divided it up into one main and one for swap and tried to get the installer to understand that one should be / and the other swap and that they had to be formatted to ext4. I think I succeeded in doing that. However, I then want to get a working bootloader with working entries for Windows AND Mandriva. The installer wants to know all kinds of stuff and I have no clue what to tell it in order to have a working bootloader or GRUB or whatever.
View 6 Replies View RelatedI have a netbook running Windows XP as standard. There is also a recovery partition which came from the factory.
In the past I installed Ubuntu (I think 9.something) from USB key and all worked fine. However my XP became corrupted and I needed to do a repair on it. After this, Ubuntu became removed from the boot select menu.
Since then, Ubuntu has become updated to 10.04, which I now cannot install.
The Live CD tells me there is a "file IO error" and simply stops installation at around 70%.
I did manage to get into Ubuntu from a Live USB using Wubi. However when I chose to install Ubuntu to a Harddrive, the option to "install side by side" was missing.
After reading on the forums, I did a chkdsk /f on Windows and tried again. Now my liveUSB does not show a boot menu!
When I select to boot from USB stick, the screen goes blank with a flashing cursor. Ctrl+alt+dlt reboots.
I'm really lost here! It seems when I fix one problem, another problem arises!
Also when trying to instal Ubuntu within Windows, the process goes through to 100% and asks me to reboot. When I do so, the option for Ubuntu does show in the boot menu. However when I select it, I get an error "Windows boot failed: file wubildr.mbr and status: 0xc00000f - something is corrupt".
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
I have just installed Ubuntu 10.4 x64 onto a machine with Vista Ultimate x64. When I boot the machine, the Windows option comes up in the GRUB menu. However, when I attempt to boot Windows, I receive the following error: No such device: de80ab9f80ab7d21. error: No such partition. Press any key to continue...
I looked around and found a similar issue at [URL] However, before trying to fix the issue by guesswork or via solutions that worked for a similar, though not necessarily identical problem. I've run the boot info script (see output below) mentioned several places on this site as a valuable input for boot problem tracking. how to get Windows to boot on my computer?
[Code]...
I'm trying to dual boot Win7 and Ubuntu WITHOUT using Grub. This is to support Bitlocker encryption.
I followed this guide, and now when I select Ubuntu I get a Grub> prompt and no ubuntu.
I feel like I'm halfway there, I just need to get Grub to load correctly or something.
if having a boot partition is recommended for dual boot installation of Ubuntu 10.04 and Windows 7 and why?
View 1 Replies View RelatedI just set up a dual boot on a system with fedora 12 and XP. XP in on one hard drive (sda) and Fedora on a second hard drive (sdb).
I installed grub on the Fedora disk so as to not touch the windows disk at all.
Prior to installation, in the bios, I set the Fedora disk (sdb) first in the boot sequence, and then XP (sda) so that the grub loader would boot up by default. (If I set the windows drive first then the system bypasses grub and loads straight into windows.)
My system can now boot up into Fedora fine, but if I select windows from the grub loader menu I just get a blinking cursor - windows will not boot.What do I have to do so that grub can boot into XP?
I am trying to install Ubuntu on a machine that already has Windows 7 on one partition. Obviously I intend to install it on the other free partition. So I downloaded the iso burnt it onto the disk and pop in the disk and the boot the machine. The installation screen comes up I selected the first option (Try Ubuntu without installation), I just see a prompt after a few seconds and then the screen goes blank and nothing happens. Unable to detect a signal, The monitor goes into standby. The same thing happens if I use "install Ubuntu" option as well. I downloaded minimal install version Ubuntu and tried to install with that. since its old school installation, the installation completed without any errors, but when I restart the grub come up and when I select to boot into Ubuntu, I see the same behavior i.e. the screen goes blank and never boots to anything. This is a machine on which I was using 10.4 until yesterday.
View 1 Replies View RelatedI just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen. I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
[code].....
I am trying to run a dual boot system with Windows 7 and an Ubuntu 9.10 installation from a live CD. I am running this on a Dell Inspiron M5030. Both operating systems have installed fine however whenever I run Windows the computer subsequently fails to run Grub upon rebooting and gives the following error message:
Grub loading
the symbol 'ob_bioslgrub?+E?U? Not found
Aborted press any key to exit
The unrecognised symbols are different each time. I have also had (' ') and ('ee*??S ') and ('un'). I cured this initially by reinstalling Ubuntu but after looking at the support documentation have now found that I can cure it temporarily by simply reinstalling Grub using the command:
sudo grub-setup -d /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub -m /media/dd5d6cd6-cb80-40e0-baf3-13ae1ebe17a4/boot/grub/device.map /dev/sda
I can then run Ubuntu fine, however upon running Windows again the problem reoccurs and Grub will not run.
I've successfully used Fedora 11 from a USB stick as a live cd iso. Everything seems to work on my netbook so i want to try installing it but I need it to be a dual boot with windows. How can i do this? And will it definitely work or are there issues (I've read that F11 has problems installing if not taking over the entire HD)?
View 3 Replies View RelatedI just installed Fedora and I love it but I can no longer boot Windows 7. I have two hard drives, sda and sdb.sda1 is my windows partition. sda2 is my /boot for Fedora. sdb1 is an ntfs partition for storage. sdb2 is swap. sdb3 is my 40 gig /root partition. Why can't I boot windows?
View 10 Replies View RelatedA while ago I used a friends computer with F11 installed on it. I definitely want to install F13 on my computer now. Please, can someone either tell me complete information from the beggining to the end, or simply direct me to a guide somewhere else on the internet. I have a F13 live cd and want Windows 7 to be in control of the boot (by I suppose LiveBCD).
View 14 Replies View RelatedIn fact, I put it on my PC of RedHat when it was free, and it didn't work.Are there any such tutorials to dual boot Windows 7 with Fedora 15 (latest version), or would someone be kind enough to walk me through the process? I have tons of music on Windows that I don't want to get lost.What are the chances that my Windows hardware will recognize in Fedora? I was bypassing to get to this forum, and I saw Nvidia drivers are difficult to get configured. Those are the drivers my PC runs on. I'm not sure of my hardware. How difficult would it to setup, and configure hardware?
View 2 Replies View RelatedI have a 160 GB hard disk with three partitions (All NTFS):
C: (30 GB) (WINDOWS XP system partition)
D: (60 GB)
E: (60 GB)
I want to install Ubuntu on another drive (D: in this case). I have backed up all my data on D: drive. What are the steps in doing so and does Ubuntu support NTFS? If it does then will I be able to read and move data between all the drives without any problem (while running either of operating systems)?
I tried to set up a dual boot system on two separate hard drives. I installed Windows XP first (because doing so in past experience has made it easier) on the PATA 20 GB hard drive configured as slave on the first IDE channel. Then I installed Ubuntu 9.10 on the PATA 80 GB hard drive configured as master on the first IDE channel along with an NTFS partition on this drive:
[Code]...
I can't for the life of me get my GRUB whatever version I have to dual boot these. I've spent over 3 weeks on it and then finally gave up.
But It would be really nice since I have so much software that is solely devoted to windows. Not to mention with my photography stuff it's just a whole lot easier to run everything through windows. But for the general census I do prefer Linux.
I'm running these two operating systems. (although I can't access my Windows 7 because of the boot menu problem) I think that's all that needs fixed but I'm not sure.
Ubuntu 9.10 ( I believe it's 64bit although the "about" doesn't specify) Windows 7 64bit is installed. Currently I only have access to Ubuntu.
I have ubuntu 9.10 installed and working on a Pangolin Performance system 76 laptop with a 120 gb hard drive. The ubuntu install has 65 GB free at the end of hard drive (done using Fdisk). It is STATA II hard drive. I got a dual boot to work on a upgrade for an HP desktop for my mom so I know the basics. Using the windows 7 OEM home premium I go the first steps i.e. time ect. Then it shows partitions (as 4 seperat objects 1 primary and 3 logical). The 2nd and 3rd are swap and more ubuntu space. The free space also comes up as logical and is the 4th partition. I try to install and says can not use this partition on the hard drive.I press the format and in changes to extention but still gives the same error (error log is not viewable in the install). All a can do is press a formate button in the install no menu. I formatted as NTFS in gparted and it still would not work. I saw posts about bios and XP but they were old.
View 5 Replies View RelatedI am newbie to linux os.I want to dual boot ubuntu 9.04 with windows 7 which is already running on my pc.When i tried to do it with live cd i am getting an error message "Permission denied" while extracting files from cd drive.The log file shows the information given below.My system specifications are code...
How to do proceed with it?Any body know about the error in the log file?
For a couple of years I have wanted to use a version of Linux rather than Windows. I currently use XP and regard myself as a reasonably experienced Windows user. My current system has two SATA HDDs - roughly 500Gb, the 'D' drive, and 140Gb, the 'C' drive, and I have 1Gb RAM. So I decided to try Ubuntu 9.10. I downloaded the installation file, created the disk and ran it live for a time. Then I decided to take the plunge and install properly.
I created free space on the C drive, around 17 Gb, in which to install ubuntu. The installation into 'the highest amount of free space' seemed to go well but when I rebooted I was given no opportunity to select Ubuntu - it booted straight into XP. So I tried again. This time I chose to 'install them side by side'. Again the installation went well but again, on the reboot, the system went straight into XP. I guess I must be missing something - can anyone tell me how to install so that I can boot to either XP or Ubuntu?
Question in title. I just wanted to know if anyone has tried it and if they were successful. And, if successful, any tips to make it easier.
View 4 Replies View Related