I have a 250GB HD which has windows on 230GB and Ubuntu 10.04 on the other 20GB--Everything works 100% however i'd like to give Ubuntu some more of the free HD space that windows is using-Can that be done without formatting either OS?
View 1 RepliesOS: RHEL AS 5 64-bit
HDD:300 GB Hardware mirror (HP blade bl460c)
While installing OS, in partition window after OS file system structure I've left 277 GB. But after installation it shows Size - 255GB and available disk space is 242 GB.
Isn't it weired? How can I use the total amount of space in Linux? I need the whole 277GB exactly. What should be my workaround?
When I installed Ubuntu(with W.U.B.I) it gave a set amount of space, unfortunately I have come near the end of the set 15GB's I was just wondering if there was a way to increase the amount of space ubuntu can use
View 9 Replies View RelatedI tried to install Portable VirtualBox using wine and even though I installed it on my /host/ folder (with 19 gb free) it downloaded some massive file on my Wubi installation (with 60 mb free) and now I am down to 3 mb left on Wubi and I can't find the massive file that it downloaded. Tried using the disk usage analyzer but nothing came up. Windows is unbootable so I can't use it.
Before this, Ubuntu would constantly decrease the amount of disk space I had free for no reason as well. It would jump from 120 mb one day to 50 mb.I moved my documents to my Windows folders but the disk space only stayed at 100 for another day or so before it went down again. apt-get auto/clean, localepurge, and deborphan are completely useless and there's something else going on behind the scenes here that I don't know about.Using Ubuntu Jaunty.
Does anyone know which distro does not need too much space.I have 4G and so far lubuntu and unbuntu both need 4 or more.
View 14 Replies View RelatedIn gparted I have the following stats for my /home drive
size: 824 gb
used 75.51 gb
unused 748.59 gb
Now when I view this in nautilus it shows something else: remaining free space as 709 gb. My question is what happened to the 40gbs? the 75.51gb are my files, but where did the 40gbs go to? Because 709 (total remaining) + 75 (my files) + 40 (mysteriously lost gbs) = 824gb. When I first made the partiton, it was a 824gb partition and ubuntu had automatically at that point reserved about 40gb for something. Does anyone know why Ubuntu reserved this space?
I have a 500GB internal SATA and a 1TB external and i can't seem to determine what my free/available disk space amount is on my internal HD. External tells me when i right click on the drive...however, that doesn't work on the internal. I've tried using the Disk Utility app, but I can't seem to get that same data/read-out. Is there (preferable) CLI command that can be used to do this -specifically, by drive?
View 2 Replies View RelatedI examined the problem, and determined that a huge amount of disk space is being taken up by files in /var/log/ The following files:
Code:
/var/log/messages.1
/var/log/kern.log.1
/var/log/daemon.log.1
/var/log/messages
/var/log/kern.log
/var/log/daemon.log
/var/log/syslog
are all over 1 GB in size. The largest is 18 GB. Together, they total 48.3 GB. I restarted the system, forcing a fsck.
it is possible if i can have sub-users in my server and can i allocate a limited amount of space only. For example i am the root of server and now i can add another user with name john and he should be able to use only of 2GB out of my total hard-disk.
View 4 Replies View RelatedAfter a terrible problem I had with x-server, I decided to opt for a clean install. So, naturally I poped in the 10.10 LiveCD (from Canonical), deleted the Ubuntu Partiton (ext4) and swap, and entered the installer. I have a 40gb Vista partition, 90gb media partition, and 20gb unallocated free space. Once I get to allocate drive space in the installation, I get three options - Install alongside other operating systems, erase and use the entire disk, or specify partitions manually. If I click install alongside other operation systems, it tries to take space away from my media partition to install ubuntu. I'm not too advanced with Ubuntu, so I don't think I'm going to specify my own. I don't know how much to give swap etc, etc, etc.What ever happened to use the largest amount of continuous free space? I have 20gb free I would love ubuntu to use.
View 2 Replies View RelatedWe use a SLES 10 SP2 file server. This file server has all type of files. We want to know what is the amount of space used by mp3 files. What we need to know is the total space in disk of mp3 files. I've been testing du command, and find command, but with no satisfactory results. Does anybody know how to do this?
View 11 Replies View RelatedCode...
but 'top' shows 2GB of swap...
top - 18:38:42 up 4:22, 5 users, load average: 0.54, 0.61, 0.64
Tasks: 369 total, 1 running, 368 sleeping, 0 stopped, 0 zombie
Cpu(s): 7.4%us, 1.4%sy, 0.0%ni, 86.9%id, 3.4%wa, 0.0%hi, 0.9%si, 0.0%st
Mem: 33265832k total, 24859468k used, 8406364k free, 379892k buffers
Swap: 2031608k total, 0k used, 2031608k free, 2030328k cached
Why is that?
What a good amount of disk space to have free? Is there a general rule of thumb? IE 70, 80 or 90%?
View 2 Replies View RelatedI installed Ubuntu 9.04 on my latop. I have an older 80 gig HP laptop with Windows XP. Currently, i have XP as the NTFS drive and it takes up about 72 gigs of space, the swap drive for ubuntu is about 256 MB and the ext-3 drive is 2.5 gigs. However, i have no more hard drive space to run or instal any programs on Ubuntu. So what i need to do is decrease the NTFS drive as i still have over 30 gigs of free space on my laptop and increase the ext3 drive to about 10 or 15 gigs and increase the swap drive?
View 3 Replies View RelatedI am using LVM2 and have shrinked my /home partition and extended my / partition but I'm not sure if I used all the free space when growing my / partition. How can I find out? I prefer using the terminal if there is a graphical way to do this but I would like to know both ways if there are two ways.
View 3 Replies View RelatedI have just purchased a 2TB drive for my server and I was trying to get an idea of the differences between these file systems or other file systems out there. What is the amount of space after formatting for ext4, ext3, and ntfs?
View 4 Replies View RelatedI want to find all users shown in the /home/ directory whose disk consumption is more than 500MB. The following command works as expected.
cd /home/ && du */ -hs
68K ajay/
902M john/
250M websites/
From the above example, only 902M john/ should be returned.
How can I make the find command output the same results?
I recently tried a frugal/poor mans install of knoppix that I placed in a folder in the root partition of /home (hda7) in opensuse 11.3. I decided to delete the folder and contents. The hard drive was busy for several minutes and after it was finished, I checked the disk usage and found that / was at 97% capacity, up from what was 10gig of free space. I could not find any traces of the deleted folder or its contents, so I used puppy linux and ran e2fsck on the / partition. Puppy linux reported 1.9gig free space and opensuse reported .5gig free space. My concern is if the deleted folder is taking up space in the root partition that I can not locate and why the difference in reported disk space usage in hda7. Also, if more packages are installed, where are they placed (/ or /home)?
View 3 Replies View RelatedI just tried adding my music from a portable hd and it says that there is not enough space in the destination. What gives? What can i do to fix this?
View 8 Replies View RelatedHow to get output of text file containing account number, debit amount, credit amount,date using shell script?
View 1 Replies View RelatedMy laptop has a 60GB hard drive, which my ex-husband set up with a 20GB partition for Windows XP and a 40GB partition with Suse 11, which suited me fine at the time. However, I'm now finding that I need to install a whole bunch of extra Windows programs relating to my work, and the 20GB partition is no longer sufficient, while I'm hardly using any space at all under Linux.
how I might go about redistributing the space between the two partitions (any other solutions to my lack of space problem also welcome)? Please bear in mind that I'm pretty clueless when it comes to this kind of thing!
What is the Max supported amount of Ram for Ubuntu? 4gig, 6gig ....
View 1 Replies View RelatedMy ATI card which has 512 MB only shows up as being 256 in Ubuntu-- what's up with this -- and -- how do you now tweak your xorg setting in ubuntu 10.10
View 2 Replies View Relatedi made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
View 1 Replies View RelatedI was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
View 1 Replies View Relatedive been trying to install 10.4 as a fresh install from a LiveCD. I downloaded the 64 bit ISO (I use Win7x64 normally, my processer is a core2 duo 2.2ghz or something along those lines), booted it up, and it starts loading. after a while, the screen chantges to a massive amount of coloured static. I tried reburning the disc, but it made no difference. Im now redownloading the file and the 32bit version too. Is this a problem anyone else has had, and if it is, is there any way to solve it? I would really like to use the 64 bit version.
View 9 Replies View RelatedI would like to upgrade my linux distro, since I'm using Karmic Koala and it is no longer supported anymore. However, upgrading via the updater always breaks my system, so I want to do a clean install. However, I have a LOT of programs installed in this machine, including a good number of games. Otherwise I think most of my data is neatly confined to my home folder, which I can easily transfer via external hard drive.
How do I get all my programs over, however? Like my PDF printer, for example, or all my games, or Inkscape, or Skype, or any number of things that I have installed. Especially WICD. I can never get my wireless internet to work without WICD. I will make a list of my programs beforehand, just in case something goes wrong, but is there any kind of less painful and time-consuming way to do this than going back and installing every program all over again from scratch?
Logical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
df -h [URL] I did the following command to find everything is in /usr or /var, then tracked it down to /usr/lib and /usr/share as the main offenders, but out of all the directories none are more than 1mb or so.
du -sh /* | sort -gr | head -n 5
I tried to uninstall firefox, which is what got me in this mess in the first place, the log claims it will remove ~240 mb but failes on a "E: Write error - write (28 No space left on device)" [URL] If I could juggle something onto an external hard drive so I can uninstall firefox I would be out of the wood. Failing that I believe a new install is in order.
I have Ubuntu 10.04 installed in my laptop through a windows installation and I want to make a new, complete, install so I can boot directly in Ubuntu (and change some configuration choices I didn't get right in the first place). Is there any (as simple as posible) way to save my actual data (users, software installed, personal files...) as a whole so I can "install" all that back to the "new" Ubuntu installation?
View 4 Replies View Related