Ubuntu :: Installed Ubuntu Via Wubi - Limited To The Amount Of Space?
Feb 13, 2010I just tried adding my music from a portable hd and it says that there is not enough space in the destination. What gives? What can i do to fix this?
View 8 RepliesI just tried adding my music from a portable hd and it says that there is not enough space in the destination. What gives? What can i do to fix this?
View 8 Repliesit is possible if i can have sub-users in my server and can i allocate a limited amount of space only. For example i am the root of server and now i can add another user with name john and he should be able to use only of 2GB out of my total hard-disk.
View 4 Replies View Relatedi have a program for x64 and i need to complile it for x32 bits if somebody knows i will be happy to know!
Here it is:
/*
* timeout - run a command for a limited amount of time
*
* Uses POSIX process groups so that we do the right thing when the controlled
* command forks off child processes.
*
* Author: Wietse Venema.
[Code]...
OS: RHEL AS 5 64-bit
HDD:300 GB Hardware mirror (HP blade bl460c)
While installing OS, in partition window after OS file system structure I've left 277 GB. But after installation it shows Size - 255GB and available disk space is 242 GB.
Isn't it weired? How can I use the total amount of space in Linux? I need the whole 277GB exactly. What should be my workaround?
I have a eeePC 901, currently installed with 9.10, and pretty much fully updated. If I try and update to 10.04 using the package update, it fails due to lack of space, OS is in the 4GB SSD. Is there some way that I can perform the update without a re-install?
View 7 Replies View RelatedWhen I installed Ubuntu(with W.U.B.I) it gave a set amount of space, unfortunately I have come near the end of the set 15GB's I was just wondering if there was a way to increase the amount of space ubuntu can use
View 9 Replies View RelatedI installed Linux Mint 9 LTS onto the family computer last weekend, everything went okay apart from today when suddenly it displays a low disk space message.
The machine has a 250Gb HDD, and has the base install of Mint, plus Dropbox and Google Chrome. (Dropbox has about 500Mb in it). That's it.
The disk usage analyzer tells me that /home is 100% full, yet when I look into each dropdown there is barely enough to make 2Gb of usage. (The most being Dropbox).
I have a 250GB HD which has windows on 230GB and Ubuntu 10.04 on the other 20GB--Everything works 100% however i'd like to give Ubuntu some more of the free HD space that windows is using-Can that be done without formatting either OS?
View 1 Replies View RelatedI tried to install Portable VirtualBox using wine and even though I installed it on my /host/ folder (with 19 gb free) it downloaded some massive file on my Wubi installation (with 60 mb free) and now I am down to 3 mb left on Wubi and I can't find the massive file that it downloaded. Tried using the disk usage analyzer but nothing came up. Windows is unbootable so I can't use it.
Before this, Ubuntu would constantly decrease the amount of disk space I had free for no reason as well. It would jump from 120 mb one day to 50 mb.I moved my documents to my Windows folders but the disk space only stayed at 100 for another day or so before it went down again. apt-get auto/clean, localepurge, and deborphan are completely useless and there's something else going on behind the scenes here that I don't know about.Using Ubuntu Jaunty.
In gparted I have the following stats for my /home drive
size: 824 gb
used 75.51 gb
unused 748.59 gb
Now when I view this in nautilus it shows something else: remaining free space as 709 gb. My question is what happened to the 40gbs? the 75.51gb are my files, but where did the 40gbs go to? Because 709 (total remaining) + 75 (my files) + 40 (mysteriously lost gbs) = 824gb. When I first made the partiton, it was a 824gb partition and ubuntu had automatically at that point reserved about 40gb for something. Does anyone know why Ubuntu reserved this space?
I have a 500GB internal SATA and a 1TB external and i can't seem to determine what my free/available disk space amount is on my internal HD. External tells me when i right click on the drive...however, that doesn't work on the internal. I've tried using the Disk Utility app, but I can't seem to get that same data/read-out. Is there (preferable) CLI command that can be used to do this -specifically, by drive?
View 2 Replies View RelatedI examined the problem, and determined that a huge amount of disk space is being taken up by files in /var/log/ The following files:
Code:
/var/log/messages.1
/var/log/kern.log.1
/var/log/daemon.log.1
/var/log/messages
/var/log/kern.log
/var/log/daemon.log
/var/log/syslog
are all over 1 GB in size. The largest is 18 GB. Together, they total 48.3 GB. I restarted the system, forcing a fsck.
After a terrible problem I had with x-server, I decided to opt for a clean install. So, naturally I poped in the 10.10 LiveCD (from Canonical), deleted the Ubuntu Partiton (ext4) and swap, and entered the installer. I have a 40gb Vista partition, 90gb media partition, and 20gb unallocated free space. Once I get to allocate drive space in the installation, I get three options - Install alongside other operating systems, erase and use the entire disk, or specify partitions manually. If I click install alongside other operation systems, it tries to take space away from my media partition to install ubuntu. I'm not too advanced with Ubuntu, so I don't think I'm going to specify my own. I don't know how much to give swap etc, etc, etc.What ever happened to use the largest amount of continuous free space? I have 20gb free I would love ubuntu to use.
View 2 Replies View Related### update ####
Sorry to waste the groups time on this one, after killing that and biting fingers, I re-examined the ps list and saw the tar and bzip running fine (so even though I killed the backup .sh, it was still going along, so I simply removed those and all was well again.
Feel free to reply though with #3, if I have 30G of mail, I know gzip is faster but bzip is more compression from reading, should;
a) tarring that mail actually drop to 3G total!
b) est (I know it's tough) but backing up 30G, is 10 hours longer than expected? (I will run some tests on a smaller folder)
############### end update
this is on an old RH9 box and backing up mail. I started the job last night in a shell script, it's around 30G of mail, and it was a tar using bzip as there was only 20 or so gig 'free space'. The old backup script was in perl and just a tar mail folder and the total was 3G so I figured I was safe.
Well it started last night and this am it was still running. I did a kill -9 on the pid and ps now shows it as;
root 9143 0.0 0.0 0 0 ? Z Feb23 0:00 [backup.sh <defunct>]
Disk space was down to 1.3G free (so somewhere all that space is being held temp somewhere), but I removed the old backup (3G which gave me a little breathing room of 4.5G), but the backup is still running somehow as the 4.5 is now 4.3. I tried the pkill, kill -9 pid, read someone said re-start the job which I did, then killed but nothing.
I really can't reboot this production box, so in RH9, I need to both;
1.kill that defunct backup
2.remove the temp storage it has made
3.figure out why it's taken 10+ hours and not done.
1 and 2 being 'critical'
Does anyone know which distro does not need too much space.I have 4G and so far lubuntu and unbuntu both need 4 or more.
View 14 Replies View RelatedI just got a new SSD, and I'm looking for advice on how best to incorporate it into my existing LVM setup. I have the following logical volumes (mounted at the obvious places):
[Code]...
I've got 108.26g in the physical volumes associated with the new SSD. I'm going to use pvmove to migrate some of these LVs to the SSD. The question is, which LVs to move?
The machine in question is basically a home workstation. I do some light development (source code lives in home), run some very low-load server processes (apache, etc.), and do a bit of image and video editing from time to time. I run Gentoo on x86 if that makes a difference.
We use a SLES 10 SP2 file server. This file server has all type of files. We want to know what is the amount of space used by mp3 files. What we need to know is the total space in disk of mp3 files. I've been testing du command, and find command, but with no satisfactory results. Does anybody know how to do this?
View 11 Replies View RelatedCode...
but 'top' shows 2GB of swap...
top - 18:38:42 up 4:22, 5 users, load average: 0.54, 0.61, 0.64
Tasks: 369 total, 1 running, 368 sleeping, 0 stopped, 0 zombie
Cpu(s): 7.4%us, 1.4%sy, 0.0%ni, 86.9%id, 3.4%wa, 0.0%hi, 0.9%si, 0.0%st
Mem: 33265832k total, 24859468k used, 8406364k free, 379892k buffers
Swap: 2031608k total, 0k used, 2031608k free, 2030328k cached
Why is that?
What a good amount of disk space to have free? Is there a general rule of thumb? IE 70, 80 or 90%?
View 2 Replies View RelatedI am using LVM2 and have shrinked my /home partition and extended my / partition but I'm not sure if I used all the free space when growing my / partition. How can I find out? I prefer using the terminal if there is a graphical way to do this but I would like to know both ways if there are two ways.
View 3 Replies View RelatedI have just purchased a 2TB drive for my server and I was trying to get an idea of the differences between these file systems or other file systems out there. What is the amount of space after formatting for ext4, ext3, and ntfs?
View 4 Replies View Relatedclarify me with ulimit output and memory limit?
ulimit -a output:
core file size (blocks, -c) unlimited
data seg size (kbytes, -d) 1572864
[code]...
I want to find all users shown in the /home/ directory whose disk consumption is more than 500MB. The following command works as expected.
cd /home/ && du */ -hs
68K ajay/
902M john/
250M websites/
From the above example, only 902M john/ should be returned.
How can I make the find command output the same results?
I recently tried a frugal/poor mans install of knoppix that I placed in a folder in the root partition of /home (hda7) in opensuse 11.3. I decided to delete the folder and contents. The hard drive was busy for several minutes and after it was finished, I checked the disk usage and found that / was at 97% capacity, up from what was 10gig of free space. I could not find any traces of the deleted folder or its contents, so I used puppy linux and ran e2fsck on the / partition. Puppy linux reported 1.9gig free space and opensuse reported .5gig free space. My concern is if the deleted folder is taking up space in the root partition that I can not locate and why the difference in reported disk space usage in hda7. Also, if more packages are installed, where are they placed (/ or /home)?
View 3 Replies View RelatedAfter using wubi, it's taken around 80GB off of an NTFS drive. The drive is now in an external USB enclosure, how do I reclaim the space? Windows XP's partition software, Partition Magic, and even Mount Manager on my laptop running Leeenux all see the drive as being smaller than it started out, the partitions created by wubi are invisible to them.
View 1 Replies View RelatedI have installed Ubuntu 9.10 using Wubi. During the install I allocated 100Gb to Ubuntu, is there any way without reinstalling of extending this, I want to give Ubuntu another 50Gb.
View 2 Replies View RelatedI installed Wubi 9.10 on my windows 7 net-book and it failed to install, so I found a tutorial and tried again to install Wubi. My problem now is it failed a second time now because I did two attempts of 30 gig installs I am missing 60 gigs hard drive space and cant figure out how to recover the lost space. I have uninstalled Wubi / Ubuntu from programs but still no recovery. It needs to be recovered so I can dual boot properly given that I use Ubuntu and Windows
View 4 Replies View RelatedThe wubi install of Ubuntu is saying it only has 125 MB left. I gave the install 10 GB to start with. I know the OS takes about 3 GB and I didn't install 7 GB worth applications. I'm thinking some how it confused itself. I've done run the Disk Analysis And it's rather confusing, but it seems to be looking at more then its alloted 10 GB.
View 6 Replies View RelatedI am trying to write a script to calculate the total amount of installed memory to use during an anaconda kickscript, so the swap file is created at 2 x the installed memory. I so far have the amount of installed RAM DIMMS but need a way to total them up and produce a varible I can use in the pre section of the install.
Code:
dmidecode -t 17 | grep Size | awk ' { print $2 }'
Output:
2048
2048
Note: on some servers there could be from 1 DIMM up to 16 DIMMS installed so the script needs to be able to handle this. I also can not use bc as it does not exist during the install stage. I am guessing I need a while loop to do this and use expr but do not know where to start for this logic.
How to get output of text file containing account number, debit amount, credit amount,date using shell script?
View 1 Replies View Related