Ubuntu Installation :: Cannot Find Operating System On Fuijtsu Amilo
Dec 30, 2010
I have just installed Ubuntu 10.04 on a Fujitsu Amilo. After removing the DVD the computer is not able to find the booting on the onboard hard-drive. I get the message "Operating system not found". My first try was from a USB stick, after that I installed from a DVD. I get the same result also after downloading again. What to do. I am confused. I have done the installation on 4 or 5 computers earlier.
I have a problem installing the oporating system, from a USB. I keep getting the error: Could not find Kernel: GFXboot. I have used a USB loader to put the ISO file on the flash drive as well as extracting the file using winrar. (separate occations) I have also tried both LIVE CD as well as the full DVD.
I have a serious problem with my computer. I had once shut down my windows forcefully( i.e. using the button) and now i am now not able to login to windows again. I tried installing linux from the booting cd but was not possible also. Now when I start my computer I get an error message. What to do?
I am trying to install Ubuntu 9.10 on an old IBM T21 laptop. It starts very happily, and I am able to partition the disk & copy the files to the HDD. However, when it loads the desktop there is an icon for the CD drive (and install disk). Everything appears to be fine, but I don't see any confirmation of the installation being completed. The CD drive does not open when the button is pressed. When I restart the laptop, I get the message 'operating system not found'. Starting the machine using the CD works fine. The disk shows that the partitions have been created, and I am told that Ubuntu 9.10 is installed.
I formatted my 2nd hard drive(IDE) inside of windows. So I had a clean 80 GIG HDD. I downloaded the wubi installer and allowed it to have 30 GIGs of the newly formatted hard drive. I restarted it and it just used my 250GIG SATA drive. I then restarted and pressed esc. to make it use the 80 GIG and it said operating system not found. I then deleted it and tried again. Same result. I then reformatted it marked it as active and installed Ubuntu again and it did boot the 80 but it said the NTLDR is missing.
I am trying to install ubuntu 10.04 and it say this computer does not have operating system on it, it wants to format the entire drive. here is the result of the fdisk. code...
after hours of formating C and windows XP and after hours of installing Ubuntu,I can see the desktop backround image, the grey bar on the top of the screen with the sound icon and the ON/OFF button and then my laptop becames unresponsive.Nothing moves, cant here anything... (the cd loading).So, If I restart the pc pressing ESC so I can change the boot order and have it boot from the Hard drive, I get this message: "Operating System not Found".I've tryed to install Ubuntu about 5 times now and both 5 times it goes up to the same point and then stops.
Initially I have installed microsoft windows 7 Ultimate and Ubuntu 10 in my notebook. microsoft windows and ubuntu are located in different partitions on my hard drive. then I reinstall microsoft windows by formatting the partition and not format the ubuntu partition. question: How to reactivate ubuntu without having to reinstall the operating system ubuntu 10?
I believe I have an old operating system of netbook Ubuntu and I am trying to upgrade to the latest 11 version. My netbook doesn't have a cd drive. I have tried using UNETBOOTIN with my usb drive (2GB) and have encountered problems with the install.
When I boot in it says" missin operating system". Sorry I don't have time to search I am on vacation and internet is sparse. Also i am loading unetbootin with a iso image of the latest version.
I have been trying to find an answer for the past 4 hours, and I am stressing out right now. I bought a IBM Thinkcentre Celeron 2.8ghz off ebay, and when I turn it on it had no operating system. It says: "1962: No operating system found. Press F1 to reboot." I press F1, and it just did they same thing. Came up with that message.
Then I searched on the net for some answers on how to install ubuntu onto a computer without an operating system, and they said to enter BIOS menu and boot the ubuntu from the USB. So I turned the comp back on, and I pressed every button on the Computer except F1, and it did nothing. I dont know how to get into the BIOS menu.
I am trying to install a linux distrobution on a laptop that can only boot off a cd or harddrive (or network? not sure), except that it has no cd drive and no operating system. That's right, no floppy no USB no CD. I read on the internet a chap installed Ubuntu with these conditions by taking out the harddrive and installing an old copy of Ubuntu on it on another computer with a disc drive, and then putting it back in his laptop and upgrading.
Now I have installed DOS 7.10 before on this laptop hard-drive and it worked, but it wasn't very useful, being a text based system. I have tried installing Windows XP (only because I am familiar with it) but my installation CD is OEM, and doesn't seem to like it. So I put the ubuntu 4.10 cd in my desktop with the CD drive after clearing all data off the laptop hard-drive (DOS 7.10). Then the cd boots and I am given the menu to install ubuntu. So I press Enter, it starts installing and then freezes at the language selection screen. So what is my problem? I have pressed lots of keys in order to get some response, but nothing. I waited 10min for something to happen, but nothing did.
I installed using USB, I formated the hard drive that has Windows because I want Ubuntu my main operating system. I can boot from USB, but when booting after installation it said
I recently upgraded to the newest version of Ubuntu. I dual boot with Windows 7.
All was going fine the first few times I used my system after the upgrade but I have now run into a serious problem. I'm not that technical so will explain this as best i can.
Basically, when I switch my computer on, I can not get to the screen that allows me to choose an operating system. Before it gets there it just restarts.
I guess its a problem with the GNU GRUB software. It just seems like the computer can't find it and restarts itself. So I can't get into either Ubuntu or Windows at the moment.
I'm new to Linux and wanted to get experience with Ubuntu Server for my new build NAS, because just a NAS OS wouldn't be enough for me. I wanted a server so I can also setup a PDC and webserver.So currently I'm installing ubuntu server 10.04 onto my newly assembled server via usb stick(didn't build in dvd rom drive) I checked the BIOS before loading the OS onto the computer and everything is detected.
there's 1 thing that keeps bugging me. After installation i get a message that the install is complete and usb sticks and all devices should be removed to prevent it from booting the install again.However when i remove the usb stick and I reboot the server I get the following message on the screen:
missing operating system
or
can't find operating system
When I do let the usb stick in, it boots into Ubuntu Server and i can see all my configurations that I made eventhough during install I chose to install it on the HD and paid attention to it I wouldn't touch the usb stick.From here on i could configure the rest, like samba, and give my server an static ip address via the command line.Back to my problem: what can i do to make my server boot from HD without that I have the usb stick in?
I'm new at Centos, although I am familiar with Redhat.I have a laptop that has Windows XP installed on it, and I want this to run Centos 5.3 instead.I read some tutorials online, where I found the download "CentOS-5.3-i386-LiveCD". I burned this to a DVD-RW. When I put the disk in my drive and look my my D: Drive it reads: DVD RW Drive (D:) CentOS-5.3-i386-LiveCD.>I am burning with Nero 7 Essentials.I place this in the laptop disk drive, bring up the BIOS, set it to boot from CD, and when I boot it up I get the message "No Operating System Found".I also tried this from another computer, Windows Vista Home Premium, and it skipped the priority boot (which I set to CD) and went right to the hard disk, booting up to Vista like normal.I hope I'm just doing something wrong.. When I go into the DVD, I first of all see a folder labeled "LiveOS" - Then inside -> -osmin - IMG File - 12.0 KB-squashfs - IMG File - 677 MB
On my laptop I dual boot Ubuntu 8.04 and Windows XP. During the last upgrade of my Ubuntu distro something went wrong and now I get a messed up GUI. In the meanwhile I got a new laptop on which I only run Ubuntu 9.10. So my question is: I want to delete the linux partition on my old laptop and use only Windows XP but since I use grub to dual boot, I'm afraid that deleting the linux partition and extending the Windows partition will cause problems to boot my computer. Here's a screenshot of my partitions:
I try installing Ubuntu 9.10 in my computer On reaching the prepare disk section it shows me that there is no operating system installed yet i have XP installed. it is also not showing the partitions in my computer yet i have 4 partitions. i cant do without ubuntu in my machine.
i tried to install ubuntu on my company notebook, where already xp is installed and I have to work with on monday again ;(I have to partitions 60+60GB with XP and Data. I tried to resize the Boot one to 50 to gain some space for ubuntu. Gparted rezided and moved partition (10unallocated+50boot+60data). I guess thats when the bootloader was destroyed. Now I can not start XP anymore. JaiiXXX! But i have to.
Question now is:
-Would it help to resize again with gparted so that i have 60+60 again and can start working?
-Should i continue installing ubuntu from usb. It is recognizing all partitions correctly and asking to install in dualboot. howeber i guess, when bootloader for xp is not working now, will it work after installation of ubuntu on the 10gb or will it make things more complicated?
-My tummy says first to repair windows xp an then install ubuntu. I have no xp cd since it is company computer. will repair morde work with another xp cd? i would prefer that. i saw that there is another way b reinstalling the xp by bootloader, but it sounds to complicated to me and i am little nervous now.p.s. i recognized that now data partition is flagged with boot . dont know why but put it back to the right partition, nothing changed.
So I was installing 10.10 to be my only operating system on my 3 year old custom built computer and all of a sudden it stopped working at the point of "whenever you are ready" but not letting me go forward because it still was loading. I waited a long time and it was frozen so I restarted my computer and now I don't have anything on it. No operating system at all. Except the symbol " _ " blinking rapidly. Nothing is working and I just want to run 10 on my desktop
I am unable to install 10.0 over a Windows XP operating system. I receive the error "Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on//filesystem.ashfs
I have a fresh install of Maverick on a Toshiba r700 laptop PT310A-05N011. I am experiencing constant freezing. The computer will without warning completely freeze. Can not move the mouse or even drop to a tty shell. After about 5 seconds the fan will spin up to full speed. I then have to do a hard shutdown. Every time this has happened i have been connected up to a wireless network with firefox open while actively surfing the net. This issue did not happen before I installed the wireless driver (Broadcomm proprietary, downloaded through ubuntu Additional Drivers).
I'm not sure how relevant that is though as 90% of what i do on this laptop is surfing and i installed the driver a few hours after install. This freezing does not happen in windows 7 and I have left it running prime95 overnight once in both 7 and ubuntu without error. Does anyone know what this may be, how i might resolve it or steps I can take to diagnose it, logs i can check?
i ordered an AsuS Eee PC 1215T netbook off of Newegg:[URL].. i was confused and surprised to discover it didn't have an operating system, only the Express Gate Cloud. it was advertised as running on windows 7, but it's not installed. i called the ASUS tech support not once, but TWICE and they didn't know diddly squat. would anyone be able to walk me through how to install linux on it? the express cloud is a very basis system. there isn't a "my computer" function so i don't know how i would go about installing anything on it. from what i understand this little netbook has great potential, i just don't know how to harness it.
I've decided to move to Debian because I have noticed Ubuntu releases getting progressively more unstable.I am following the official Debian installation guide. Just did this with the Debian 6.0 Net install .iso: 4.3.1. Preparing a USB stick using a hybrid CD or DVD image. Debian CD and DVD images can now be written directly a USB stick, which is a very easy way to make a bootable USB stick. Simply choose a CD or DVD image that will fit on your USB stick. See Section 4.1,Official Debian GNU/Linux CD-ROM Sets to get a CD or DVD image.
Alternatively, for very small USB sticks, only a few megabytes in size, you can download the mini.iso image from the netboot directory (at the location mentioned in Section 4.2.1,Where to Find Installation Image).The CD or DVD image you choose should be written directly to the USB stick, overwriting its current contents.
I was wondering if i can remote desktop with my blackberry if i could install a program on my computer that would allow me to monitor a operating system install or even use my blackberry to install the operating system.
I have a dual boot windows XP/ubuntu 9.10 set up on one hard drive. Everything was working fine. The 9.10 install had been updated from 9.04. I recently had problems with the XP partition (XP basically collapsed) so I re-installed XP on the same partition it was on before. I then attempted to reinstall Ubuntu ( I decided I wanted a new 'clean' installation of Ubuntu as well). When I got to the partition function it refused to recognize that there is a Windows partition, or a previous ubuntu partition, but states 'No operating system installed' or similar, and offers the entire hard drive for installation. When I look at the partitions using Windows partition software the Windows and the ubuntu partitions are clearly in evidence. I have also tried to reinstall GRUB but it doesn't appear to exist.
I'm trying to install Ubuntu 10.04 (32 bit)on my laptop (where currently is installed the amd64 version of Ubuntu 10.04 that I've decided to remove because of some small issues).I've tried using the installation CD (the same I've used to install it on my desktop, so I know that is a working copy),but at boot, although I select to boot from CD, the Live version doesn't start and Ubuntu 64 is run as usual.I've tried to create a startup diskon a usb pen,there the live version seems to start but then Busybox 1.3 is loaded and there is an error with initfrm saying that no operating system can be found.I've been told to download the alternate edition, but I'm still downloading it,
I am new to linux and have searched over a period of days on the internet for any reference to installing XUBUNTU 10.10 onto a brand new hard drive that has no operating system on it I have successfuly made the CD using this PC I am on now and Nero Burning Rom from my Nero 9 aplication but I have built a new PC that I wish to put XUMBUTU onto
I have Windows XP on one drive "C" drive, Windows 7 on another "E" drive and want to install Ubuntu on another drive "G" drive. How do I when installing Ubuntu select the "G" drive to install to?
Then how to select the operating system required from a cold boot?
