Ubuntu Installation :: Can't Boot Into Any OS / Make It Possible?
Sep 16, 2010
The Error Message
"BOOTMGR is missing Press Ctrl+Alt+Del to restart"
The Setup
My computer has 3 HD's the first drive dual booted windows7/ubuntu10.4
The other HD's are NTFS slave drives will all my data on them.
After a lot of reading the fix I found was to use my windows7 repair disk, but I don't have a repair disk. I also cant torrent at my school so I cant install a repair disk via a torrent file.
What I Did
I reinstalled ubuntu 9.10 wiping clean my first HD (sda). I restarted my computer and still got this error.
View 5 Replies
ADVERTISEMENT
Jun 15, 2009
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
View 3 Replies
View Related
May 27, 2011
My old computer started randomly rebooting so I went out yesterday and bought a new one. It's a standard Intel 64 architecture with 2gb ram etc.The old computer was running Lenny however I'm happy to upgrade, so I just went to the main Debian download site and downloaded:debian-6.0.1a-ia64.netinst.iso (this didn't work, apparently ia64 is for itanium and my machine is definitely not that), so I downloaded: debian-6.0.1a-amd64-netinst.iso, burnt the CD and ran the install. First time through I had a power failure.
Second time through (a complete fresh start - new partition and everything) it went all the way through to completion and reboot.Clicked 'Continue' to reboot and the machine reset as it would normally and the Grub loader started okay, prompted for the "Debian amd64" standard boot image, selected that and the first 6 lines appeared normal, then the messages wizzed by so fast that only superman could read them. Then they stop - here is some of the content...
[3.816673] Kernel panic - not syncing: Attempted to killl init!
Call trace:
get_empty_filp
panic
[code].....
Running it again I get similar stack stuff but it's a different place: [3.541816], [3.427502] And sometimes if I wait for a minute or two it will continue on further but appear to crash again. Hardware details (everything is onboard - no added cards):
G41M-S3
Intel G41 + ICH7 chipsets
CPU: LGA 775 for Intel Core 2 Extreme
[code]......
Is the amd64 the wrong image? Should I try i386? Is it a blip and I should just rerun the entire install again?
View 14 Replies
View Related
Feb 1, 2010
I installed the alternate disc on my ibook G4, it finished the install ejectedtrf the didc then restarted , The writing came up I to boot to C for cd rom so ihit retirn as per nut then it just stayed at an empty black screen
View 4 Replies
View Related
Jan 3, 2010
New laptop with windows 7.Wanted to try kubuntu so created a live cd. Unable to boot from the CD - the machine gives splash screen then nothing else.No ttys available.I can hear the welcome tune from KDE. But nothing else.So I created a ubuntu cd with exactly the same result.These cds work ok on another HP box that I have which is running XP.
This is an advent roma 2000, the driver used by windows seems to be mobile intel 4 series express chipset family - hmm. not sure about that but that's all I could see. using oem2.inf file.This is not my machine so I can't go ahead and do a character based install and try to progress this - I need to run from the live cd to see if the owner likes KDE enough to ditch W7 for linux.
View 1 Replies
View Related
Apr 29, 2011
I just installed ubuntu 11.04 on a separate partition on my hard drive so i can have dual boot for window 7 and ubuntu. I have done this in the past with 10.10 and it use to work fine. But now after installing 11.04 I am not able to boot it. I have recorded a video of what happens. here is the link. http://www.......com/watch?v=oLr2LqS0cEQ
I have written my laptop spec in the description of the video.
View 5 Replies
View Related
May 20, 2011
I have a desktop pc with three hard drives:
160 gb with windows XP
500 gb used for data and archives
40 gb with Ubuntu 10.04 and Zorun 4
Grub currently defaults to boot Ubuntu I want to make changes to boot XP as default. What file(s) do I need to edit to make necessary changes? In the older distros I knew how to edit "menu.1st" to get this done. The newer distros must have a different structure because I can not find a menu.1st file.
View 5 Replies
View Related
May 29, 2011
I unplugged the Windows drive, during the installation of Ubuntu 9 (to make things easier). 2 separate drives. When installation was complete, I plugged the other drive back in (now both are plugged in). I went to the BIOS and made sure the Linux drive was the set to boot before the windows drive. The only thing that comes before that of course is the cd drive
CD-0
HDD-1 (linux)
HDD-0 (windows)
I booted into linux after this and ran 'sudo update-grub'. The cmd was successful. However, when rebooting it does not give me the option to boot to windows. Why not?
PS. If I go to Places (under GNOME bar), Then I can see (and mount) the windows drive. So it is accessible.
View 2 Replies
View Related
May 4, 2010
I upgraded my dual-boot (Vista/Ubuntu) system last night to 10.4. Everything had been working perfectly running karmic.
As I recall, during the upgrade process, something, I assume grub 2, asked for a list of boot devices and defaulted to selecting all devices, one of which was a non-bootable USB stick. I consented.
This returned some sort of error; I made a couple different choices selecting different drives until ultimately it accepted my choice and continued the upgrade process.
Once the upgrade completed, I could no longer boot into Vista. I now assume that one of the choices that I deselected was the dual-boot manager.
From what I can tell, all the Windows files remain intact, I just can't boot into Vista.
View 5 Replies
View Related
Aug 25, 2010
I have the issue of getting the Kubuntu getting booted first if I do not select manually in 7 sec. how to make that auto selection to XP so that, I can leave the computer and let it select Windows.
View 4 Replies
View Related
Nov 11, 2010
10.04 boasts a very quick boot time, but after upgrading, I've been having a much slower boot than in 9.10. It hangs at the screen when it says
Boot from (hd1, 0) ext3
Starting up...
It stays at this screen for a good 15 seconds before showing me the login screen. I've attached the results from a boot info script.
View 4 Replies
View Related
Jan 4, 2011
I have a eeepc netbook with 4 gig internal flash storage, no hard drive.I broke the GUI. The ONLY way I can access it now is through a terminal.It has barely enough space to get the ubuntu .iso image over to it.I have tried upwards of 10 times with 2 or 3 different distros to make a bootable usb drive with my macintosh. The process appears to complete without errors but the usb sticks are 100% unbootable every time (i.e. the netbook refuses to boot from them, as does my mac).
I get the SAME result using the SAME usb stick that I originally used to install ubuntu on the netbook, so I know it did work once. Regardless, I would like to try as a last hope to start from scratch making the bootable usb stick from my actual netbook.I do NOT have access to a GUI (see above).direct me to instructions to make a bootable usb drive from ubuntu 8.something?
View 5 Replies
View Related
Aug 8, 2010
Esteemed (K/X)Ubuntu'ers, I need some help. I had a Samsung HDD (Internal) that crashed, was a fault of the store that sold it to me and they went bankrupt. I thought I buy an external HDD (Western Digital Elements 1.5TB) and boot Kubuntu from there, so I still use the computer till I buy a super nice one after USB 3.0 hit the streets.
The problem I keep having by booting of the external HDD is that GRUB keeps saying Code: error: bad filename how to install Kubuntu on a external HDD and make it boot correctly?
View 6 Replies
View Related
May 26, 2011
I just want to ask if there is a way to make grub bootloader automatically boot to ubuntu every start up. And only make the bootloader appear when I press a certain key(ie. F7) so that I can boot to windows when I do not want to boot on Ubuntu.
View 2 Replies
View Related
Aug 16, 2010
I have a Redhat Enterprise Linux system and I want to re-make it as Debian. I downloaded the Debian netinst iso but can't seem to make a bootable CD out of it, and I haven't found any adequate explanations anywhere.
I tried burning the iso directly to a disk. i set up the boot order in my BIOS but when I restart the machine it spins the CD drive a few times and then moves on to the hard drive.
I tried expanding the iso into a directory, and then copying all those files into into the "Blank CD-R Disc" on my Gnome Desktop, burnt the CD, and still no boot.
I found some instructions using X3b, but X3b was giving me errors.
View 8 Replies
View Related
Jan 20, 2009
I'm trying to install Fedorad 9 on my windows Vista dell xps laptop in a seperate partition. I can't seem to make my laptop boot off of the DVD i'm burning the Fedora ISO to. I'm just using Windows, not Nero or anything like that. I've changed the boot options in setup, burned the ISO to the DVD and rebooted but I end up in Windows. By the way, should I just go ahead and use Fedora 10 as a new user or has it been "debugged"? I don't need any additional "new version" problems at this point.
View 2 Replies
View Related
Apr 7, 2009
I just searched the forum for ibex and nothing turned up - but I've recently had a surprising experience worthy of a thread (IMHO). Used to be an UBUNTU devotee, until this and working at netuxo.com which is taking me to debian...
Was making a dual boot laptop, and found that on THREE seperate attempts UBUNTU ibex, whilst it would of course make a near flawless laptop install replete with wi-fi it would NOT permit windoze to remain in the MBR or indeed on the drive. In a fashion reminiscent of M$ it took a fascist attitude and insisted on owning the machine, in one case actually stealing the partition, despite selecting option to only use free space. In the other two it just messed the MBR up.
View 6 Replies
View Related
Sep 7, 2010
I'm trying to make my own boot CD with different linux distros and tools. These are the things I'm going to include on the CD:Lucid Puppy 5.11 (Live)Damn Small Linux (Live)Gparted LiveArch linux net install(Total size: about 600 MB)I was thinking about using GRUB legacy as the boot manager on the CD, but I'm wondering how I can install GRUB to a CD. I've been experimenting with the live CD of Ubuntu, but when i start to delete the Ubuntu files (which I don't need) it messes up the filesystem manifest and I'm left with a non-bootable .iso. So I want to build GRUB from scratch and add all the entries to the menu.lst.
View 2 Replies
View Related
Apr 3, 2010
I installed Ubuntu a while ago now and I like it but when I installed it I removed windows and now its starting to annoy me. I cannot sync my ipod touch, I can't play some of my games because they are all meant for windows and wine does not work for then so what I want to do is uninstall ubuntu and reinstall windows xp, then I will reinstall ubuntu and this time around I will make a dual boot. Only one problem, I don't know how to uninstall ubuntu.
View 9 Replies
View Related
Apr 29, 2010
confirm or deny if 10.04 and Windows 7 cleanly dual boot? If Win7 is already installed and I plan on installing 10.04 after, do I need to make special changes to get them to dual boot properly?
View 9 Replies
View Related
Aug 31, 2010
I have Windows 7 and Ubuntu 10.04 dual-booted on my machine. grub was aautomaticlu installed as the primary loader. Soon i want to nuke my ubuntu partition but i know that will delete grub. Can i remove grub or at least make Windows boot loader default.
View 2 Replies
View Related
Jun 2, 2011
I have a Dell PowerEdge SC1425 with two SCSI-disks, that I have tried installing Debian Squeeze on. This machine has previously been running Lenny (with grub 1), and the upgrade was done by booting a live-cd, mounting the root partition and moving everything in / to /oldroot/, then booting the netinstall (from USB), selecting expert install and setting up everything (not formatting the partition).
Both disks have identical partition tables:
/dev/sda1 7 56196 de Dell Utility
/dev/sda2 8 250 1951897+ fd Linux raid autodetect
/dev/sda3 * 251 9726 76115970 fd Linux raid autodetect
/dev/sda1 and /dev/sdb1 contain a Dell Utility, that I have left in place.
/dev/sda2 and /dev/sdb2 are members of a Raid-1 for swap.
/dev/sda3 and /dev/sdb3 are members of a Raid-1 for / formatted with reiserfs.
After installation, grub loads, but fails with the following message:
GRUB loading.
Welcome to GRUB!
error: no such disk.
Entering rescue mode...
grub rescue>
Doing "ls" shows:
(md0) (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1)
I can do the following to get grub to boot:
set root=(hd0,3)
set prefix=(hd0,3)/boot/grub
insmod normal
normal
This will bring me to the grub menu, and the system boots.
It appears that grub has only found md0, which I believe is the swap partition, because ls (md0)/ returns error: unknown filesystem. I have installed grub to both sda, sdb and md1, and tried dpkg-reconfigure grub-pc and dpkg-reconfigure mdadm, as well as update-grub.
I manually added (md1) /dev/md1
to /boot/grub/device.map, but still no result.
I have run the boot_info_script.sh, but unfortunately I cannot attach the RESULTS.txt, because the forum aparently does not allow the txt-extension. Instead I have placed it here: [URL]. I am tempted to go back to grub-legacy, but it seems I am quite close to getting the system working with grub2.
View 6 Replies
View Related
Jun 26, 2009
I actually have a Suse running on a partitioned harddisk of 27GB but I prefer Fedore anyway. I would like to install Linus Fedora on my computer to make a dual boot system (Vista and Linus) by overwriting the previous Suse. My question is
Will I be in OS booting trouble (i.e unable to resurect the previous boot screens, windows might possibly be deleted, or not be present in the boot options) if this is done ?
Also, because I have only one disk (the first disk of Fedora 11 downloaded), will it be fine with just one first disk ? (there are several to download but I think I assume I am not going to use all of them during installation, right ?)
View 6 Replies
View Related
Jan 9, 2010
I currently using Ubuntu 9.10 last update formated with on a ext3 format. I have been a very happy ubuntu user for about 1 year. I have a win7 but I really do not see the point in installing it any more (only when I feel like playing a game).
Any my question: Some time ago I read somewhere that it is possible to make a customised boot "disk/DVD" so the programs etc. is intallled/deleted like you what from the beginning. ex. late week one of my harddrives crasched - and therefore I created a new and had to go find everything again. (codecs - program - visulizations and so on) I more or less use the same basic thing everytime for everything to work probably to my liking, but this takes me about a day (more or less) and this time wasted.
View 5 Replies
View Related
Aug 17, 2011
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
View 4 Replies
View Related
Jun 14, 2010
I installed ubuntu using wubi and then I tried installing grub 2 but it failed. I need a way to reinstall the mbr sp it will load the windows 7 loader from the first partition.
View 1 Replies
View Related
Aug 13, 2010
I use Ubuntu 10.04 and after installing the driver for my onboard video card, I can no long boot into Ubuntu. I'm thinking that if I was somehow able to remove it, this might fix the problem. Is there a way to do this, possibly from the boot cd?
View 4 Replies
View Related
Dec 31, 2010
I'm trying to make a boot-able CD from a downloaded 10.04 (amd64) iso file. I downloaded the iso file and burned the CD according to the instructions on the ubuntu site. The CD would not boot and the only message was ISOLINUX .... then the computer shut down. Re-downloaded the iso file, re-burned CD, same result. Installed new CD drive, re-burned, same result. What I'm I missing? I'm fairly new to Linux but have been using 8.04-10.04 for about six months. I'm trying to make a boot-able Live CD so I can do a clean install on a new HD.
View 2 Replies
View Related
Apr 19, 2011
First off how do i make a live cd boot up on a usb key?
Secondly does a ubuntu usb key retain logs after you turn it off?
Thirdly how do i know if my laptop supports booting from usb-would that be in the bios screen options?
View 4 Replies
View Related
May 8, 2010
I'm sorry to post so much, but every time I solve one problem another comes up! xD
Anyways, I created an install CD for the newest Ubuntu, and the CD works. I used it to install Ubuntu, but when I went to reboot to complete the setup, it just went back to Windows normally. Then when I booted from the CD directly, bypassing Windows entirely, my monitor displayed "No sync" and refused to display anything until I turned off all power to the computer and restarted into Windows normally.
How can I make it so that it will boot to Ubuntu?
View 2 Replies
View Related
