Debian Installation :: Mixed Wheezy With Sid Now Have Broken Packages
May 6, 2015
Without knowing the consequences I added the Sid repository to Wheezy (installed version) in order to install some software. Only much later I discovered that this generated me some mess which does not allow now to install additional software due to library conflicts.
I tried to install some packages needed to build the PhantomJS but here is what I got:
Code: Select allReading package lists...
Building dependency tree...
Reading state information...
build-essential is already the newest version.
g++ is already the newest version.
g++ set to manually installed.
[Code] ....
Is there a way to clean up the mess that Sid introduced and revert back to the Wheezy versions?
I have an old backup, so it would take me much more time to reinstall/reconfigure certain software, so I am looking to alternatives.
Is there a way to check all the packages and find all the potential conflicts and then a way to restore the original Wheezy content?
View 1 Replies
ADVERTISEMENT
Jun 2, 2015
I've changed my /etc/apt/sources.lst file to use "jessie" repositories instead of "wheezy". I then ran synaptic and updated everything (there were loads of packages, something like 2000 to update).
After this I rebooted. The grub menu shows as usual with the background image I'd set and the operating systems as usual (including Windows 7) however there is no longer a 5 second countdown and when I select *any* menu option, it asks for a username and password.
I don't know what username and password it's asking for as I never used to have one set!!! I did have a username and password set up so that if you wanted to edit a grub menu option so I tried that but to no avail.
I'm using MBR/BIOS not EFI.
View 3 Replies
View Related
Apr 24, 2010
I've been trying to fix this problem for quite a few days now and have done a lot of searching on these forums, Linux Mint Forums and some others Google lead me to and have has some success, but am now stuck.I have posted a thread on this same topic on the Linux Mint Forums, but have had no success (if you want check it out at:URL...Originally I received error messages when trying to update involving certain repositories which couldn't be accessed (because they either didn't exist or had been moved) and I hunted these down and changed or removed them.
I have done much searching, etc. and cannot find any broken packages. I have tried many many different commands which have mostly done nothing.I seem to be in a similar boat to this person: URL...
View 2 Replies
View Related
Apr 13, 2015
Something within the group of updates which I installed last week (April 6 to 10 or so) has impaired the functionality of my mouse's scroll wheel. It will no longer scroll pages on Iceweasel, Midori, some PDF readers, PCManFM, and others. The "up arrow" and "down arrow" seem also to have been compromised. I suspect the culprit might be libx11. This is an amd64 system with the nvidia video driver.
View 2 Replies
View Related
Feb 24, 2011
After the updating the synaptics driver in wheezy, I can no longer tap to click. This includes single-finger taps in the center and corners. Here is the relevant section from my xorg.conf
[Code]...
View 4 Replies
View Related
Aug 27, 2015
seems like after a recent upgrade of stretch, i get a message (in italian)
Code: Select all
$ sudo apt-get install kde-full
Lettura elenco dei pacchetti... Fatto
Generazione albero delle dipendenze
Lettura informazioni sullo stato... Fatto
Alcuni pacchetti non possono essere installati. Questo può voler dire
che è stata richiesta una situazione impossibile oppure, se si sta
usando una distribuzione in sviluppo, che alcuni pacchetti richiesti
non sono ancora stati creati o sono stati rimossi da Incoming.
Le seguenti informazioni possono aiutare a risolvere la situazione:
[CODE]..
View 2 Replies
View Related
Apr 21, 2011
what should not be mentioned:
*disabling "Automatically fix broken packages before installing or removing" in aptitude -- because it does not work
*editing /var/lib/dkpg/status -- not related to apt-get really
* -m or -f options of apt-get -- because they do not help me in any way
* downloading the package manually and using dpkg --force-depends-version -i <package> -- again, not apt-get
I need the --just shut the fuck up and dl&install the darn package option immediately.
View 14 Replies
View Related
Jul 26, 2010
I am just too tired and am missing something in the man pages for aptitude and not getting my search terms right but I can't seem to find a way to make aptitude ignore a couple of supposed broken packages (they work just fine by the way). The only way I can find to remidy the situation is to remove those couple of packages or upgrade several things to their Squeeze counter parts. I really don't want to try and do the upgrade as at home I am stuck on a 56k connection. Removing the broken packages I guess won't be too bad if I can find the debs again after I install a couple of things I want to add to my system. I would however just like to make aptitude ignore the state of my system and try to install what I want anyway.
View 14 Replies
View Related
Aug 25, 2011
I have Lenny in a multi-boot system on a HP Pavilion DV-1000 laptop, and yesterday when I logged in, noticed the red (-) icon on the right of the top panel. Mouse over it gave the message: "An error occurred, please run Package Manager from the right-click menu to see what is ". On doing so, Synaptic came up with "You have 3 broken packages on your system! Use the "Broken" filter to locate them". Selecting "Broken dependencies" resulted in the "base-files", base-passwd", and "dpkg" being listed. All three had "Installed Version" the same as "Latest Version", but marked in red in the check boxes.
Did "Edit"->"Fix Broken Packages" which marked the packages green. Clicking "Apply" gave a summary list: coreutils, gawk, gcc-4.3-base, libacl1, libattr1, libc6, libgcc1, libselinux1, libstdc++6, and izma as the packages that needed to be installed. Clicked "Apply" and got: "E: Internal Error, Could not perform immediate configuration (2) on libc6" A Google search indicated several people had run into this problem, but I could not find one consistent solution that seemed to address the problem completely.
View 2 Replies
View Related
Jun 4, 2015
I've been trying to install a few programs with the basic Debian repositories on my Jessie edition, but I keep getting a "broken packages" error and "cannot be installed" error, and the programs won't install.
I went to other repositories, e.g. Mint and Ubuntu, and with these included in my sources.list file, I was able to install the desired programs.
If the programs are listed in Debian and the dependecies as well, why would they not install?
View 9 Replies
View Related
Oct 23, 2015
I am attempting to setup an ftp server as a first project to get me going in the world of Linux however when I run the command apt-get install proftpd-basic ....
View 14 Replies
View Related
Sep 12, 2015
I'm on Debian testing and every time I try to install Gnome I get this:
Code: Select all# alexandernst at stupidbox in ~ [18:51:07]
$ LC_ALL=C sudo tasksel install gnome-desktop --new-install
tasksel: apt-get failed (100)
I tried installing it manually:
Code: Select all# alexandernst at stupidbox in ~ [18:51:35]
$ LC_ALL=C sudo apt-get install gnome
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] ....
Is this a problem in Debian repos (held packages) or I'm actually doing something wrong?
View 13 Replies
View Related
Apr 11, 2010
I have a broken package and can't seem to fix it. Now, nothing can be downloaded from synaptic. I get the following error message:
Processing triggers for software-center Setting up courier-mta (0.61.2-lubuntu3) * Starting Courier mail server. Starting Courier mail server. invoke-rc.d: initscript courier-mta, action "start" failed. dpkg: error processing courier-mta (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: courier-mta E: Sub-process /usr/bin/dpkg returned an error code (1) How do I fix this?
View 1 Replies
View Related
Dec 13, 2010
I am trying run an update but I get an error "Fix broken package first".I then went into synaptic and fixed the broken packages and tried to the update but I had the same problem still.
View 9 Replies
View Related
May 7, 2010
During my recent upgrade from 8.04 to 10.04, I got a few error messages concerning the flashplugin-nonfree not installing correctly. A user named carlee helped me get flash working over on the absolute beginner forum, but I've got a related problem still unresolved.Update manager is convinced that my perfectly working flash installation is broken, and insists I update it.However, the update fails every time, telling me E: flashplugin-nonfree: Package is in a very bad inconsistent state - you should reinstall it before attempting a removal.
Opening synaptic, I cannot select the reinstall option for the plugin. Removal and complete removal are my only options, and both give the above error. More problematic, I cannot de-select the flash plugin entirely. It MUST be part of any other package update through synaptic (if I wanted to re-install avant window navigator, for example). And since the flash removal operation fails, synaptic is effectively non-operational.How can I convince my update manager that my fully operational flash is just fine the way it is?
View 5 Replies
View Related
May 16, 2010
Am trying to upgrade from karmic 9.1 to lucid 10.04 and have the problem that as part of the upgrade I get a report that some packages are broken. As suggested posting the relevant files APT and MAIN Logs from the /var/log/dist-upgrade below.
View 4 Replies
View Related
Mar 22, 2010
I installed java and my computer went off in the middle of the process and some packages didn't install correctly. I decided to reinstall them but it doesn't let me. I have tried to remove them using the synaptic manager, I also tried to remove them manually. I've tried: apt-get -f install also. I tried to re-install it using:
sudo apt-get install sun-java6-jre sun-java6-plugin sun-java6-fonts
but this error comes up
Errors were encountered while processing:
sun-java6-jdk
sun-java6-fonts
E: Sub-process /usr/bin/dpkg returned an error code (1)
View 7 Replies
View Related
Aug 23, 2010
I am tried to install Sopcast for Ubuntu Netbook remix but keep being told I have broken packages but I can't find any in synaptic or ubuntu tweak. I think I had a failed install before I found the frontend package on ubuntu tweak but I cannot find where the problem is.
I am running ubuntu on an Acer Aspire One as my sole operating system.
View 1 Replies
View Related
Oct 12, 2010
Here is the apt.log from running 'do-release-upgrade'. apt-get upgrade runs without issue and I have disabled all of the extra repos I had (opera, tor, lucid-propsed, chromium). My system is otherwise 100% up to date with apt-get dist-upgrade and apt-get upgrade. I have already purged all of my PPAs using 'ppa-purge', but it looks like there are remnants of xorg-edgers in there somewhere: [URL]
View 4 Replies
View Related
Jan 7, 2011
When I try to update my packages, or install new packages, I get this error:"E: /var/cache/apt/archives/libglib2.0-0_2.26.1-0ubuntu1_amd64.deb: subprocess new post-removal script returned error exit status 1"I tried the "sudo apt-get install -f" but it didn't work.I'm running 10.10, on a Asus laptop
View 3 Replies
View Related
Feb 5, 2011
Update Manager tells me it has updates. So I close what I am doing with VirtualBox and a Windows Client and I tell the Update Manager to go ahead. But it stops, says I've got OpenOffice and QuickStarter both running. Not so, at last not to my knowledge. I try again, and it tells me I have a broken package, and to use the 'Broken' filter to find it. Where is the 'Broken' filter? And even if I work that out, what should I do about a "broken" package? So I look online. Only references to "Broken" packages are with respect to Windows. Windows is a shut down client, and VirtualBox has been shut down.
So I try the recovery mode on a reboot. This reports I have 15 broken packages, all to do with OpenOffice. I select Fix Broken Packages, and it keep stopping to tell me that OpenOffice and QuickStarter are both running, and I need to deal with that. How? A restart and effort to fix broken packages did no good. I look online again, and this time I run down where someone writes you can follow a link, and what you get there will do the trick. Only the link goes nowhere, so it has been moved or deleted.
View 2 Replies
View Related
Feb 27, 2011
I have been upgrading 10.4 to 10.10, but in the middle of the new package download my computer turned off (outage). Now Ubuntu won't restart the upgrade or install the packages already downloaded; it tells me it "Could not determine the upgrade" and that unresolvable problems occurred, caused by held packages. How can I reset things to restart the upgrade?
View 4 Replies
View Related
Mar 21, 2011
I keep on getting this red " - " icon on my panel and I try to perform the upgrade it prompts me to do. But it says that there are 3 broken packages i need to fix with the "broken filter". How do I fix this so I can upgrade?
View 2 Replies
View Related
Apr 23, 2011
I want to install aptitude using apt-get, but some problems happen like this:
The following packages have unmet dependencies:
aptitude : Depends: libapt-pkg-libc6.10-6-4.8
Depends: libept0 (>= 0.5.30) but it is not going to be installed
E: Broken packages
(before do this, I have used command apt-get update and apt-get upgrade)
View 6 Replies
View Related
Jun 3, 2011
I was installing some packages using the generate download script in synaptic and 'sudo dpkg -i -R ...' because I don't have my own internet connection at home but somewhere else. I think I got carried away a little and installed some packages that have some dependency issues. Now I have three broken packages that need to be removed, but I don't want them to affect (remove) other packages which would be marked whenever I try to mark them for removal, for fear that their removal might affect other functions. I think my machine was just fine before I started to fumble with individual dependencies; that's why I don't what the other dependencies removed. My question is how do I remove those dependencies only using the terminal without removing the others?
View 3 Replies
View Related
May 10, 2010
I tried to upgrade to 10.04, but did not succeed. Error: You have held broken packages.
View 2 Replies
View Related
Jan 6, 2013
Just re-installed Wheezy to ssd-drive and noticed that everything works much faster than before. For the older install I made some changes to /etc/fstab (I think) which I found from the web. I don't remember exactly what changes.
Question is: what's the situatation with Wheezys beta4-release and ssd-drive? Do I have to edit something at the moment, or does the installer notice ssd-drive and make everything needed?
View 7 Replies
View Related
Jun 15, 2011
I searched the forum about installing the liquorix kernel but I cannot understand why the file /etc/apt/sources.list is not mentioned to invoke the liquorix repository.
Instead, I found: Alternative Performance Kernel for Debian wrote:For anyone interested, just add the following to a sources file (/etc/apt/sources.list.d/liquorix.list): deb [url] or for you scripters, echo "deb [url]
View 2 Replies
View Related
Jun 20, 2015
I already have a Notebook with windows (for some reason it needs 3 partitions..) and wheezy. When I installed wheezy I create 2 logical partition inside a primary one: one logical for /home and the other one for filesystem. Now I would like to overwrite wheezy and get get jessie, but without touching windows and home.
I already try to upgrading and it went wrong, so I prefer overwrite, what I have to do during "manual installation" phase?
View 11 Replies
View Related
Apr 2, 2011
I'm wondering I've read in some places that if people would like to move from a stable branch of Debian to the testing you can usually just replace the lines in sources.list with the testing release and update and then dist-upgrade. Is this true...and if so is it safe?
View 1 Replies
View Related
