Ubuntu Installation :: Blank Screen After Update To 1104 / Get GUI Back?
Jun 20, 2011
.I am new to Ubuntu. Installed and got 10.10 working fine with wireless network. Tried to update to 11.04. Due to flakey wireless connection I only got a partial update downloaded. Tried to insatll what I had but that didn't finish either. On boot up I had a completely blank screen. Tried restore (multi boot system with WIN98SE Separate partitions) but don't know enough about command line tools to know what to do with what comes up. BTW, WIN98SE comes up fine. If I am understanding what the restore screen shows, it is coming up in TTY1. How do I get the GUI back?
I'm have much computer experience but am new to Ubuntu. I typed in sudo apt-get install ubuntu-desktop and it tells me it's already installed. Good. So it should work. I type sudo/etc/init.d/gdm start and the screen goes blank for 8 seconds three times in a row and then back to the command line. I have also tried gdm start without the path before and it says GDM already running. Aborting!
i have installed ubuntu 9.10 on my hp nx6325 notebook, and everything was working just fine, then it updated and problem started coming up. First the computer wouldn't reboot after the update, blank screen, then i manually reboted and now some programs don't work (ubuntu software center, update maneger, avant window navigator)
i assume the update did some damage, so how can i repair this, is there a recovery tool or something.
Upgraded online from 10.04 to 10.10 this morning....went OK I think! Was offered option to upgrade further to 11.04...and went for it!! Returned later to a blank screen.....unable to wake the machine....no disk activity Now have some function via a live CD......any thoughts on how I can proceed from here? I would like to persevere with the 'upgrade' route, as a fresh install will result in much loss of files
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
I have a dual-boot Ubuntu 10.10 & Windows 7 computer. I when choose "Ubuntu" on the boot menu, it just says something about no wubldr, then the screen goes blank, & it goes back to the boot menu. The last time I used Ubuntu I installed some updates, and it told me to restart the computer. I restarted the computer, and Ubuntu wouldn't start.
I have rented a server in a datawarehouse to host my mysql databases, subversion repositories, websites etc. I don't have physical access to this server (I don't even know the location of the data warehouse).
I connect over SSH (Putty) to this server.
When I login I get the message that new release "natty" is available (1104). Run "do-release-upgrade" to upgrade to it. I've never done an upgrade, so I'm afraid there has to be a reset during the upgrade process and a manual action on the machine itself to restart it.
Is it possible to do this upgrade without manual intervention, can somebody give me perhaps a pointer to a location of a good "howto"
For good understanding: I don't have a graphical user interface, just the command line through Putty. I've installed the utility "screen",
Yesterday I got an update in update-manager: gdm blabla 3.2... installed. restarted. And I see nothing after the boot screen (plymouth, default one) display stays blank, even caps-lock doesn't turn on its indicator on the keyboard. hdd activity indicator on the laptop doesn't blink, only power indicator is on... the only way is to press and hold power button to turn it off. restart and I see the same picture........
I thought that's hdd, because yesterday ubuntu froze completely on a ..... video (adobe I hate you!)
so I turned laptop off and started again (before it froze I installed that gdm "security-"update) and saw the blank screen for the first time.
then I booted into "single" mode, manually starting X OR GDM gives me the same blank screen with frozen/unusable keyboard, caps-, numlock do not word, I can't switch virtual terminals...
so I've reinstalled the whole system an hour ago. Everything went well!!!!I booted into clean 11.04 (except my configs, cuz I haven't formated /home partition). Then I restored my ppa's (/etc/apt) that I backed up from the 'single' mode... updated apt database, restored all of my backuped apps (dpkg --get-selections >... dpgk --set-selections <...)an hour to update everything. installed ati driver, RESTART, and what I see? BLANK SCREEN RIGHT AFTER PLYMOUTH.
startx from single mode = blank screen gdm start from single mode = blank screen
I can't use ubuntu, PLEASE HELP ME fixing that crap.
I downloaded yesterday gdm blabla3, blabla3.1 and blabla3.2
downgraded the crapped gdm-0ubuntu3.2 to 3 and to 3.1 NO DIFFERENCE. I JUST GET BLANK SCREEN.
before restoring the apps everything worked.
and yesterday THE ONLY INSTALLED UPDATE WAS gdm
there are absolutely NO ERRORS in /var/log/*I viewed every file from that dir, that was created at boot attempt...no errors, nothing, just blank screen
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
I go to install packages, or even updates. and it comes up with this..
Quote:
installArchives() failed: Setting up tzdata (2011g-0ubuntu0.11.04) ... Use of uninitialized value $reply in scalar chomp at /usr/share/perl5/Debconf/FrontEnd/Passthrough.pm line 66. Use of uninitialized value $reply in concatenation (.) or string at /usr/share/perl5/Debconf/FrontEnd/Passthrough.pm line 67.
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I've been running Ubuntu 10.10 very smoothly for a while now. Decided to upgrade to 11.04 - managed to corrupt the hard disk the first time by letting the laptop hibernate part of the way through but reinstalled from a live CD of 11.04 and it's now working except for this issue.
If I shut the screen on my laptop (or press the screen off button) either the screen won't come back on or it will but frozen (I can move the mouse but not click on anything etc.) In this state music continues to play (from spotify under wine) and if I press my hibernate shortcut (power button) the computer hibernates, only to wake into the same situation. I've got a Dell Latitude D520, upgraded to a bigger hard disk and more ram - the ubuntu partition has 50gb. Windows is working fine.
Edit: I noticed a sticky thread which includes something about a blank screen but I think this is a different issue?
I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"
Then suddenly Ubuntu loads without showing any option to load windows 7.
So finally decided to upgrade the desktop (dual-booting with Windows 7 for games) from 9.10 (fresh install awhile ago, never did anything with it) to 10.04 - upgrade went fine, reboot, watch grub go by, and voila. Blank screen.
I was hoping to test out Windows 7 in a VM, see how far I could get for GPU acceleration there - I'd much rather not run Windows on the bare iron for that machine, but if I can't get this fixed I have no option :-/
I'm installing Koala here on a 250gb Sata drive. I am looking to dual boot with Win7. I've got a 80gb Win7 partition and the rest is unallocated so I can install Ubuntu on to it. If I try to install, I get to the manual partition screen and it's blank. From what I can tell, Ubuntu isn't recognizing my hard drive at all. When I boot into the liveCD and run gparted, it says no devices found. Also when I boot gparted from a cd I get the same thing. BIOS sees the drive fine and the drive boots into Windows fine.
When I run "sudo fdisk -l" I get nothing. I've tried several of the flags including all-generic-ide. Also tried removing dmraid.
I recently got a new laptop and am trying to install Ubuntu 9.10 on it. I have installed it on my two other computers without any problems, but there seems to be a hitch with my new one. So I boot up using the live CD and then am presented with the option to test Ubuntu or install it. If I choose either of these the screen just goes blank. If I go with the first option of testing Ubuntu before installing, I can hear the intro drumbeats but the screen is still blank.
I have searched in some forums and tried some people's advice, like pressing Ctrl+Alt+- or trl+Alt+Backspace to change the resolution and restart X windows, respectivley. But it doesn't seem to work. I'll list my laptops specs just in case my problem has anything to do with them:
MSi Windows 7 Home Premium 32 bit Intel Core i3 M 330 2.13GHz 4GB DDR3 RAM Intel Graphics Media Accelerator HD
Ok well this is my first post on the ubuntu forums and the problem I have is, hopefully, pretty simple to fix. When I am installing Ubuntu, I go through all of the steps and once it asks where to install and partitioning and all that I tell it to erase the entire windows thing and put in Ubuntu. So I click the Forward button and when it gets to 69% of copying files, the screen goes black. It sounds like its still running the install but I cant be sure. What should I do?
I've found similar posts to this but none seemed to be solved. I'm trying to install ubuntu 9.10 on my new laptop. Dual boot Win 7 Pro on first partition.Its a gateway nv79 laptop with an intel i3 330M processor.The problem occurs when I boot from the CD I get the first menu where you can choose to install, load ubuntu from CD, etc. No matter which option I choose, I get nothing but a blank screen. Then I can do nothing but power down by holding the power button.I've tried both 64 and 32 bit versions, same thing. The 32 bit disk works fine on another computer. I've also tried booting another version of Linux, Helix, from CD and that also works fine. I'm thinking ubuntu doesnt support my graphics card: Intel Graphics Media Accelerator HD
I'm trying to use the live cd on my HP Pavilion Entertatainment laptop, but I get a blank screen. The Ubuntu logo shows and I get to choose my language, but when I click on "Try Ubuntu without doing anything to your computer" (paraphrased) the screen goes blank. About a minute later I hear the Ubuntu music.
I did a fresh install of 8.04 alternate disk with LVM then updraded to 10.04 (due to lack of any spare CDs around).
Everything was working fine but wanted to try to get the nvidia-173 drivers installed (I have an old FX5200). Can't start into X now as my plasma says mode unsupported.
At one point I managed to boot into recovery mode then root terminal and removed all nvidia packages and reinstalled nvidia-173 only and followed the instructions listed on the 10.04 release candidate page. Still stuck with the unsupported modes error on my TV though. I have a 720p plasma display (1366x76, I usually run 1280x768 without issues. I'm guessing it is the refresh rate set in the new xorg.conf that is throwing me off, how to adjust this?
An issue that's complicating things however is that when I try to boot into recovery mode I get an error stating 'pcspkr' driver already registered, aborting... then it hangs there until I ctrl-alt-delete and force a restart. This is preventing me from getting to the point where I can select a a root terminal to try to fix my errors.
I have used 8.04 exclusively for a few years and wanted to try something new (still not all that adept at linux setup).
EDIT: I managed to get to root again and just removed the xorg.conf file and that seems to work somewhat. Except now I can't boot as I get a looping mountall: Plymouth command failed that hangs up the process.
I've been using Ubuntu off and on since 6.10, but I am definitely a noob when it comes to troubleshooting this kind of stuff. All of my previous installs went flawlessly, so I guess I've been lucky so far. I finally decided that I would bite the bullet, and remove Windows altogether. No more dual-boot with XP or 7 for me.I've been attempting to install the 10.04 RC all weekend, and it's been pretty frustrating. I decided I would start with my aging laptop, a HP Pavilion ze8500 that I custom-ordered way back in 2003. A few specs I know off the top of my head:
P4 (2.30 GHz) 512MB RAM 40GB SATA HDD
I burned the ISO to CD-R and started the install. When I boot from the CD, I get a purple screen which is blank other than two symbols at the very bottom. IIRC, one looked like a ruler or something, and the other looked sort of like a star in a circle? I think they were separated by an equal sign.I have no idea what that meant, but I knew enough to hit F6 and that got the install menu to appear onscreen. The only way I could get through the installer without losing video was to use 'nomodeset'
I installed over top of Windows 7 RC with the default partition table settings and after the install finished, I got the dialog box telling me that a restart is necessary. I hit Continue, the CD tray ejected, and my laptop restarted.So, assuming that the installation was a success, I see the BIOS screen, and then that goes blank, and where I would expect to see a boot screen or a Grub dialog, I see nothing at all.After the first install attempt, I would hear a drum sound after the screen went blank.I tried hitting 'Esc', along with 'Ctrl+Alt+F1', 'Ctrl + Alt + F2' or whatever else I could think of, and nothing seems to work.I updated my BIOS, remembering that I forgot to do that, and then I reinstalled Ubuntu. Again, no display when Ubuntu boots. And now, I hear no drum sound at all.
So I tried to install ubuntu 10.04 on my 5 year old gateway laptop but the screen kept going blank when ubuntu was booting up. I was able to get to the menu screen and add "i915.modeset=1" after "quiet splash", which allowed ubuntu to load. I installed it on the hard drive successfully, but when I restarted the computer, it won't load again. I don't know how to fix this so I can run it from the hard drive.
I'm attempting to install Ubuntu Netbook remix (however I have tried others) on a 32 bit laptop but after it goes through that ubuntu loading thing, it goes blank after that and I've determined that it's not the cd and it's something to do with the hardware after looking at other posts with similar issues. I do not have an operating system on this laptop.
I've searched the forums and all the problems seem to be getting a blank screen after the first menu or first splash screen.My problem is that I'm getting a blank screen straight away without seeing anything. As soon as the system says that it's booting from CD the screen goes blank and nothing happens.I've done the md5sum on the disc successfully (and the iso). It's an old system (P4) and I'm using the integrated graphics.I've tried Ubuntu Server 10.04, UNE 10.04 and Ubuntu 9.04, all have the same problem.
I have an HP computer nvidia and AMD stickers on it and 1GB RAM. HDD is Parallel ATA. I downloaded both Ubuntu & Kubuntu Live CD. Both live CD's boot to a blank screen. After a (seemingly) successful install of kubuntu, the screen goes blank after GRUB.
Here are the details: With this HP, when i boot from ubuntu live CD the screen goes blank. It does not give any option about trying ubuntu, install, ubuntu, mem test. I just get a blank screen. On my ASUS laptop the ubuntu live CD goes straight into ubuntu live (without having to choose an option). It is not the CD When I boot from kubuntu live cd i get to the screen where i have an option to try kubuntu, install kubunt, memtest..
If I choose either try or install, my screen just goes blank & never progresses. Again, this live CD works on my ASUS laptop. At the bottom of the boot screen for the kubuntu live CD i noticed f1-f6 configurations. I was unable to change any other than language and f6 options. If I press f6 i get options which i can mark with an x. I don't know what any of these mean but I checked all of them and then on the boot menu popped up
BOOT **a whole bunch of text** I went onto install kubuntu and it no longer went to a blank screen. Rather it was a fuzzy grainy splash with the word KUBUNTU and loading dots underneath. Atlas it seemed to prevail, the installation process started (fuzziness went away). The installation screen now looks just as it did on my ASUS laptop. I continued through the steps with an installing on the entire HDD. The installation completed (with no signs of error). Screen said take out disc press enter.
I did so and my computer turned off. I power up the computer and the GRUB loads up. I have option of regular and fail safe. Both lead up to a blank screen. My monitor seems to think there is no signal and goes into standby mode. Perhaps the video card is not rendering correctly or not compatible.
ive tried to update my test-laptop (thinkpad t43) to the actual beta. the dist-upgrade worked whitout problems, but after rebooting the x-server seems to work, but screen is empty...it seems that the xserver is crashing:
Quote: Caught signal 11 (Segmentation fault). Server aborting here the full log: Quote: [ 181.280] X.Org X Server 1.9.0
I have a blank screen on boot up. Has happened since 10.04.It's this problem[URL]I tired their three solutions did not work however clicking F6 and slecting nomodeset before booting got farther then ever and then saidI have tried different images, betas RCS full versions, netbook, derivatives and its all the same.hats going on? Can it be fixed and is this always going to happen now or is it just a two cycle bug?
