Ubuntu Installation :: 10.10 - No Disks At "Allocate Drive Space"
Jan 29, 2011
I'm a Linux newbie but familiar with computers in general. I can install 9.4 64 bit (but no network to update from), but 10.4 and 10.10 both fail -- I cannot get the Allocate drive space screen to list the available drives. Just a blank panel. The drive is listed in the Boot loader panel. The LiveCD works. Disk utility and Gparted are both available. At one point I even managed to mount the 9.4 file system on the LiveCD, I think using "sudo mount"
View 2 Replies
ADVERTISEMENT
Jul 11, 2010
I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):
Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat
View 5 Replies
View Related
Apr 8, 2010
I have Dell Laptop 1545 which already installed windows 7 home premium which is also having two partitions one is reserved by the oem and another is for recovery partition and another 200gb i am using for windows 7 now i have left only 80gb hard disk. So I started to install the Fedora 12 in my laptop every thing is going fine but
at the time of creating the partitions iam unable to allocate the partitions the left 80gb i tried to select and tried for custom partition but to my surprise it is giving the following message "Could not allocate requested partitions: not enough free space on disks"
View 3 Replies
View Related
Oct 24, 2009
Created abt 16.4 gb free space using Disk Management in vista. I read the sticky on installing from the live cd and did accordingly. Whatever Partition i create first (boot or /), it gets done. However, when tryin to create the 2nd partition, i get "Could not allocate requested partitions:Not enough free space on disks." Cant proceed any further.
View 5 Replies
View Related
Jun 21, 2011
I have an Acer Aspire One that came with Windows 7 starter and 1GB of ram. I am currently trying to install Ubuntu 11.04 via USB drive. The problem that I am having is, whenever I get to the Allocate drive space screen it shows nothing. The box is pink with not text. If I click on Install now anyway I receive a No Root File System error. Currently the hard drive has NO partitions on it, including no file systems. It's completely blank and it is also showing up in my BIOS.
View 7 Replies
View Related
Apr 30, 2011
On the Ubuntu website, they have a screenshot of installing 11.04 from 10.04. The options are: Install 11.04 alongside 10.04, Upgrade 10.04 to 11.04, Erase 10.04 and reinstall, Something else. Erase 10.04 and reinstall is the option I want, but that is not an option when I actually try to install it. The installer detected that I have Ubuntu 10.04 and Windows XP, and gave me the following options: Install 11.04 alongside both, Erase both OSes and install 11.04, Something else. I want to install 11.04 over 10.04 and leave Windows alone. I guess I have to do the partition stuff, but I don't want to screw anything up. Here's how my partitions are currently set up.
/dev/sda1 ntfs 54303MB
/dev/sda3 ext3 19567MB
/dev/sda5 swap 896MB
/dev/sda2 fat32 5248MB
View 3 Replies
View Related
Apr 25, 2011
I am borrowing a friend's Eee PC 4G. Ubuntu eventually crashed because the hard drive filled up (even after all personal files had been removed). So now I'm trying to reinstall Ubuntu Netbook 10.10 from a bootable USB. Creating the USB worked fine and I managed to get all the way to the "Allocate drive space" screen. I opted to make no partitions and just use the entire disk space for the install. It tells me that 2 partitions will be deleted, which is fine. I then click Forward and it just hangs there endlessly, spinning its wheel. I suspect that the already-full hard drive may be causing problems. Is there any way around this so I can get the computer running again?
View 9 Replies
View Related
Feb 10, 2010
Is it possible to allocate more disk space to WINE's c: drive?
View 1 Replies
View Related
Jan 24, 2011
I have a notebook with dual boot windows and Ubuntu 10.10 on a 80 Gig hard drive. The windows XP partition was initially installed and took up the whole drive (dev/sda1). I then freed up some space and created and installed Ubuntu (/dev/sda6) and swap (/dev/sda5) on an extended partition (/dev/sda2). Initially I only freed up 3.6 Gig which I thought would be more than enough but not any more. I cannot even install the updates as there is only 100 Meg left which is not enough. I then freed up more space (8 gig) from the windows partition to allocate to Ubuntu.
My problem is that I can't seem to find to now allocate this "freed-up" space to Ubuntu? I realise that I have to boot-up from a the Ubuntu live disk so that the hard drive is not mounted to allow changes but I'm still unable to change the partitions. I'm using GParted.
The drive looks like this currently:
[...NTFS] [...Unallocated] [...Extended{(ext4),(linux-swap)}]
View 2 Replies
View Related
Jun 4, 2011
i already make a copy of all my data and i already download the live cd of fedora 15
here is my computer specifications of my netbook
AMD SEMPRON SI-42 2.10 GHZ
2,00 GB OF RAM
32 BIT SYSTEM
ATI RADEON HD 3200 GRAPHICS
232 GBS OF FREE SPACE
DVD-RW
this pc works good in Fedora 15 ? I do not know how much space to allocate for the partitions to be created, and I do not know which partitions must be created. I need a very good performance, my computer is able to give it to me with Fedora 15?
View 3 Replies
View Related
Apr 30, 2010
How do I allocate more space to the "/boot" directory?
I'm trying to upgrade from 9.10 to 10.04 and it says the "/boot" directory does not have enough free space, and that I need to free up 5mb more.
I checked my root dir, and I have 65Gb free.
View 1 Replies
View Related
Mar 16, 2010
I have a messed up system, or so I think. I have all sorts of partition issues that I just don't understand. I may have installed Ubuntu multipe times (GRUB show 5+ copys) along side my copy of W7. GParted show two Unused partition spaces, one massive on that it cant read completely (ntfs), a LinuxSwap, something called (ext4) and something called (extended).
What is going on? I recently deleted a virtual machine, but it looked like this even before this. How can I allocate all of my space only to W7 and one Ubuntu OS? Pic of GParted is attached.
View 8 Replies
View Related
Aug 14, 2009
I got a new computer (core i7, 6gb ram, 500gb hdd).I first installed Windows 7, because I remembered how Fedora 9 created a dual-boot screen nicely, while if I installed XP on a system with Fedora 9 it would just take over the boot and boot to XP.Anyway, so Windows 7 is installed, and I got the Fedora 11 DVD install.I partitioned the hdd as thus (on win7 installation): 93gb windows system, 300gb media partition, 90gb unformatted.When I boot the installation and select the "use free space" I get an error that there isn't enough free space on the disks to create the layout.I also tried to create a custom layout, but after a few errors I gave up on that what should I do to get Fedora 11 installed?
View 9 Replies
View Related
Feb 1, 2011
I have 500 MB of unallocated space on my hard drive. I would like to create a new partition with ext 3. Unfortunately, gparted gives an error so I am wondering if there is a way to do this without using gparted.
View 3 Replies
View Related
May 6, 2009
I'm trying to install Fedora 3 Core on an old hard drive I had lying around. The problem I'm having is that when I go to manually repartition the hard drive with Disk Druid I get this error: Could not allocate requested partitions: Partitioninf Failed: Could not allocate partitions as primary partitions. I can't view the contents of the hard drive to delete stuff.
View 6 Replies
View Related
Oct 1, 2010
it is possible if i can have sub-users in my server and can i allocate a limited amount of space only. For example i am the root of server and now i can add another user with name john and he should be able to use only of 2GB out of my total hard-disk.
View 4 Replies
View Related
Jan 20, 2011
I just got a new SSD, and I'm looking for advice on how best to incorporate it into my existing LVM setup. I have the following logical volumes (mounted at the obvious places):
[Code]...
I've got 108.26g in the physical volumes associated with the new SSD. I'm going to use pvmove to migrate some of these LVs to the SSD. The question is, which LVs to move?
The machine in question is basically a home workstation. I do some light development (source code lives in home), run some very low-load server processes (apache, etc.), and do a bit of image and video editing from time to time. I run Gentoo on x86 if that makes a difference.
View 3 Replies
View Related
Sep 7, 2010
I have a VMWARE machine, I have extended it from 20GB to 30GB for Linux box.How do I take the additional 10GB that it has and allocate it to -dev-mapper-VolGroup00-LogVol00 ?That way I can use the 10GB of available space in that file system.
View 1 Replies
View Related
Jun 13, 2011
I have no hard drives in my computer, so I have been trying to boot Ubuntu 11.04 from an 8GB usb flash drive. Is this possible? So far the best result i have gotten is it will sit on the loading screen for a while then dump. I was only able to get the last little bit which reads mount. mounting /dev on /root/dev failed: no such file or directory. mounting /sys on /root/sys filed: no such file or directory. mounting /proc on /root/proc failed: no such file or dirctory. target file system doesn't have requested /sbin/init
View 4 Replies
View Related
Mar 31, 2010
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
View 2 Replies
View Related
Jan 13, 2011
I recently followed this guide to create a RAID1 [URL]... First I partitioned the disks with fdisk. I made the RAID array with
mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1. Then I created the filesystem with mkfs.ext3 /dev/md0.
I then mounted md0 at /Video with mount /dev/md0 /Video/ All according to the guide.. Today I made a samba-share out of /Video/Rorschach to easily put files in there from my windows7-machine (the plan is to steam from my CentOS-server to my HTPC which hasn't arrived yet). I started to put movies in there. It went just fine for a while but then I got this message: [URL]... How is that even possible when df -h looks like this?:
[code]...
View 2 Replies
View Related
Jan 13, 2011
I recently followed this guide to create a RAID1 [URL]First I partitioned the disks with fdiskI made the RAID array with
mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sdb1 /dev/sdc1
Then I created the filesystem with
mkfs.ext3 /dev/md0
I then mounted md0 at /Video with
mount /dev/md0 /Video/
Today I made a samba-share out of /Video/Rorschach to easily put files in there from my windows7-machine (the plan is to steam from my CentOS-server to my HTPC which hasn't arrived yet).I started to put movies in there. It went just fine for a while but then I got this message:
[URL]
How is that even possible when df -h looks like this?:
[root@Rorschach Rorschach]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
446G 70G 354G 17% /
[code]...
View 2 Replies
View Related
Jan 24, 2010
I downloaded the Ubuntu installer for windows and it gave me a pop-up saying:
256MB of memory are required for installation. Only 233MB are available. Installation may fail in such circumstances. Do you wish to continue anyway?
This is an odd situation because when I finished installation of Ubuntu the first time (I uninstalled it,) it wasn't responsive and said my hard drive had 0 space on it. I still have about 23GB left on my disk. How do I clear out space so the installation can work properly?
View 1 Replies
View Related
Oct 18, 2010
I am attempting to install 10.10 over my 9.10 installation, but the installer says I don't have the required 2.6GB of free drive space. This problem only occurs with my 120GB SATA drive. If I plug in my old 80GB ATA drive (in a USB enclosure), there's no problem and I'm able to get past the installer's 3-point checklist.This is the first time I've encountered a problem like this and it seems as if no one else has encountered it yet. I can therefore not find this topic on any Linux forum, so I'm quite out in the cold.
View 9 Replies
View Related
Jan 8, 2011
For some reason ubuntu will not install, as its saying that the 1.3gb of space is used up...yet there is a new 750gb seagate hooked up. bios reads the new hard drive. there are no other external/internal drives of any kind hooked up. here is a run down of what i have done...
disconnected old hard drive connected the new hard drive with the older cables put the 10.10 installation disc in boot drive it says i have the comp plugged into a power source and connected to the internet but it wont allow me to click the forward button because i dont have 2.6gb of drive space.
View 9 Replies
View Related
Aug 6, 2011
My Ubuntu 11.04 installation took all 40GB of my hard drive space on my laptop, can GParted make a partition for extra space and make the installation smaller??
View 9 Replies
View Related
Mar 6, 2010
I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies
View Related
Jan 20, 2010
I've tried installing UNR on a 1GB flash drive in the past, and on two occasions it completely broke due to lack of disk space. When I say broke, it was when I was trying to install or upgrade packages, it said it ran out of disk space, everything slowed right down, and in the end I had to restart. I was put into a recovery shell and after poking around for about 30 minutes, gave up. Then reinstalled.
Now my shiny new 4GB flash drive is split into two sections, one for documents (1.9GB) and one for the installation+persistency file (1.9GB). I went about updating the UNR system, adding software I need (some of which is quite big, anti-virus software, lyx etc), and quickly found the old warning message: disk space low. hastily make some free space (apt-get clean, delete a big firefox cache), and post this message. My questions:how do I find out how much disk space is left on this 1.9GB partition - specifically the persistency file? I've tried disk usage analyzer, also du -h, but can't really understand it. I want to be able to see ahead of time when I am short of disk space. I would like to switch to using XFCE instead of gnome for speed and disk space. Is this possible? What is the best way to switch, without risking maxing-out disk space and crippling the system again? is there are way to take a snapshot of the whole partition? I would like to back it up in case it goes haywire again. Would I just want to copy the persistency file, that's it?
View 5 Replies
View Related
Oct 10, 2010
I've just downloaded 10.10, made install USB, removed the partition that used 10.04 (have home on an other partition), started the installation but the choice "install using free space" is removed from the installation. How can I install 10.10 using the free space on harddrive? WHY did they remove the choice "install using free space"
View 9 Replies
View Related
Oct 16, 2010
When I install and update software on Ubuntu, what is the location of those installation files. I'm going to install Ubuntu 10.04 LTS with 30 GB and wanna update huge collection of software. Is it enough or I need more space?
My plan is :
boot = 130MB
swap = 4096 MB
/ = 26000MB
Should I need separation of root(/). Like: /user, /tmp etc. If, then which media needs more space?? OR what should be the best choice?
View 1 Replies
View Related
