I have a VMWARE machine, I have extended it from 20GB to 30GB for Linux box.How do I take the additional 10GB that it has and allocate it to -dev-mapper-VolGroup00-LogVol00 ?That way I can use the 10GB of available space in that file system.
View 1 RepliesI have decided that my partition table does not meet my needs Barrymore, and I want to shrink the "/" partition by 80GB, and then create another file system on that space. I did some research on-line, and I'm not sure which way is the easiest and more secure way to perform the change with out putting the "/" file system on risk.
View 1 Replies View RelatedI have a notebook with dual boot windows and Ubuntu 10.10 on a 80 Gig hard drive. The windows XP partition was initially installed and took up the whole drive (dev/sda1). I then freed up some space and created and installed Ubuntu (/dev/sda6) and swap (/dev/sda5) on an extended partition (/dev/sda2). Initially I only freed up 3.6 Gig which I thought would be more than enough but not any more. I cannot even install the updates as there is only 100 Meg left which is not enough. I then freed up more space (8 gig) from the windows partition to allocate to Ubuntu.
My problem is that I can't seem to find to now allocate this "freed-up" space to Ubuntu? I realise that I have to boot-up from a the Ubuntu live disk so that the hard drive is not mounted to allow changes but I'm still unable to change the partitions. I'm using GParted.
The drive looks like this currently:
[...NTFS] [...Unallocated] [...Extended{(ext4),(linux-swap)}]
i already make a copy of all my data and i already download the live cd of fedora 15
here is my computer specifications of my netbook
AMD SEMPRON SI-42 2.10 GHZ
2,00 GB OF RAM
32 BIT SYSTEM
ATI RADEON HD 3200 GRAPHICS
232 GBS OF FREE SPACE
DVD-RW
this pc works good in Fedora 15 ? I do not know how much space to allocate for the partitions to be created, and I do not know which partitions must be created. I need a very good performance, my computer is able to give it to me with Fedora 15?
I'm trying to install Fedora 13 on my HP dv6 laptop and when I try to use the Use Free Space installation type, I receive a Partitioning Error: Could not allocate requested partitions - not enough free space on disks. Before I started the install, I used the Disk Management utility in Windows 7 to shrink the volume of the C: drive down to 242 GB and leaving 210 GB Unallocated. Here is what the screen looks like when I select Create Custom Layout (also receive the not enough free space error):
Device (sda) Size Type
sda1 199 ntfs
sda2 248,018 ntfs
Free 215,175
sda3 13,443 ntfs
sda4 103 vfat
I have Dell Laptop 1545 which already installed windows 7 home premium which is also having two partitions one is reserved by the oem and another is for recovery partition and another 200gb i am using for windows 7 now i have left only 80gb hard disk. So I started to install the Fedora 12 in my laptop every thing is going fine but
at the time of creating the partitions iam unable to allocate the partitions the left 80gb i tried to select and tried for custom partition but to my surprise it is giving the following message "Could not allocate requested partitions: not enough free space on disks"
I've been having a problem updating for the last few days. Everytime I try "yum update" it downloads the packages I need and when it tries to install them it stops because of this errors:Quote:
installing package kernel-2.6.31.9-174.fc12.x86_64 needs 5MB on the /boot filesystem
installing package libuser-devel-0.56.13-1.fc12.x86_64 needs 5MB on the /boot filesystem
installing package compiz-0.8.2-21.fc12.x86_64 needs 5MB on the /boot filesystem
[code]...
My debian 5 is up and running smoothly and act as file-server in the middle of windows network jungle using samba the only problem is, after backup an external hdd (213 GB) to my /home partition, I end up with message say that I'm running out free space. Fyi my debian installed on 1TB SATA disk, and I separate my /home partition from system what happen to my free space ? here is screenshot of my disk, using disk usage analyzer: is there is a way to get my space back or something missing on my setup.or I have to reinstall my debian and use LVM when partitioning my disk?
View 8 Replies View RelatedMy fedora keeps popping up this message of Low disk space..the volume file system roots has only 200 MB remaining.Then it came to 150 MB and now to 100MB.I am using fedora 13 on vmware .I set my vmware hard disk to 20 GB... my file system is showing 100 MB free while my home has 12.3GB free. Is there a way increase the size of my file system. similar problem has been in ubuntu [URL] but I dont know what to do with fedora.Also can some one tell me the way I can increase the size of usr folder .so that I can get some more softwares.Right now I am just stuck.
View 5 Replies View RelatedCreated abt 16.4 gb free space using Disk Management in vista. I read the sticky on installing from the live cd and did accordingly. Whatever Partition i create first (boot or /), it gets done. However, when tryin to create the 2nd partition, i get "Could not allocate requested partitions:Not enough free space on disks." Cant proceed any further.
View 5 Replies View RelatedI have a messed up system, or so I think. I have all sorts of partition issues that I just don't understand. I may have installed Ubuntu multipe times (GRUB show 5+ copys) along side my copy of W7. GParted show two Unused partition spaces, one massive on that it cant read completely (ntfs), a LinuxSwap, something called (ext4) and something called (extended).
What is going on? I recently deleted a virtual machine, but it looked like this even before this. How can I allocate all of my space only to W7 and one Ubuntu OS? Pic of GParted is attached.
I have 500 MB of unallocated space on my hard drive. I would like to create a new partition with ext 3. Unfortunately, gparted gives an error so I am wondering if there is a way to do this without using gparted.
View 3 Replies View RelatedI just got a new SSD, and I'm looking for advice on how best to incorporate it into my existing LVM setup. I have the following logical volumes (mounted at the obvious places):
[Code]...
I've got 108.26g in the physical volumes associated with the new SSD. I'm going to use pvmove to migrate some of these LVs to the SSD. The question is, which LVs to move?
The machine in question is basically a home workstation. I do some light development (source code lives in home), run some very low-load server processes (apache, etc.), and do a bit of image and video editing from time to time. I run Gentoo on x86 if that makes a difference.
Is it possible to allocate more disk space to WINE's c: drive?
View 1 Replies View Relatedit is possible if i can have sub-users in my server and can i allocate a limited amount of space only. For example i am the root of server and now i can add another user with name john and he should be able to use only of 2GB out of my total hard-disk.
View 4 Replies View RelatedI have an Acer Aspire One that came with Windows 7 starter and 1GB of ram. I am currently trying to install Ubuntu 11.04 via USB drive. The problem that I am having is, whenever I get to the Allocate drive space screen it shows nothing. The box is pink with not text. If I click on Install now anyway I receive a No Root File System error. Currently the hard drive has NO partitions on it, including no file systems. It's completely blank and it is also showing up in my BIOS.
View 7 Replies View RelatedIn System Monitor, on the File Systems tab, the "Total", "Available" and "Used" columns don't seem to add up, and the "Used" percentage doesn't seem correct either.
My config:
/dev/sda1 = 80 GB SSD drive, / partition.
/dev/sdb1 = 50 GB FAT32 partition of an external 500 GB USB hard disk.
/dev/sdb2 = remainder of the 500 GB USB hard disk encrypted using luks.
Screenshot: The /dev/sda1 figures don't really add up well, but they're close at least (how you get "50% Used" from any of those figures I don't know!).
However, for /dev/sdb2, they're miles off:
"Free" = 146.2 GiB
"Total" = 409.7 GiB
"Available" = 125.4 GiB
"Used" = 263.5 GiB
[Code]...
I originally had an Ubuntu partition on my hard drive which occupied about half of it. I installed Windows 7 in the remaining unallocated space and I was planning on doing a grub update from a live cd afterwards. BUT when I looked at my partition table, the space where the ubuntu partition used to be is now unallocated space!
View 5 Replies View RelatedCan anyone tell me how to increase system file's partition size.I have ext3 type partition where FC11 is installed.Is it possible to increase the size of ext3 without lost of data?
View 2 Replies View RelatedWhat file system should I use to partition a slow and old hard drive? I know that ext2 was best for old computers which mine is not but I am using an old hard drive for extra storage and I was curious if anyone knew if using ext2 or ext4 would show any performance differences.
View 4 Replies View Relatedi just installed Fedora 12 (via vbox 3.1.4). stupidly i started with 8G and, of course, ran out of space on the / filesystem. i added 8G to the drive which now shows as 17G.based on the below outputs, it looks like i have 8G more space available on the drive. based on reading other posts it looks like i need to use parted to increase the size but not sure how to do that.
View 7 Replies View Relatedi want to add space to my file system, i want to slice some space from my home directory coz it has a lot of space...i am just adding applications, but im runnint ofspace....what shall i do, without reformating or reinstalling my ubuntu 10.10?
View 1 Replies View RelatedI have tried to automate the configuration of a usb drive with not much success.
The problem that I have is that I have a large amount of usb drives that have a partition table of type "loop" and I need to change them to "msdos". The size of the drives vary and I need to use FAT32 or FAT16 file system.
I've tried various partitioning commands and gui applications but cant find one that I can give a one line command to to set the partition table, maximum partition size and file system.
On the Ubuntu website, they have a screenshot of installing 11.04 from 10.04. The options are: Install 11.04 alongside 10.04, Upgrade 10.04 to 11.04, Erase 10.04 and reinstall, Something else. Erase 10.04 and reinstall is the option I want, but that is not an option when I actually try to install it. The installer detected that I have Ubuntu 10.04 and Windows XP, and gave me the following options: Install 11.04 alongside both, Erase both OSes and install 11.04, Something else. I want to install 11.04 over 10.04 and leave Windows alone. I guess I have to do the partition stuff, but I don't want to screw anything up. Here's how my partitions are currently set up.
/dev/sda1 ntfs 54303MB
/dev/sda3 ext3 19567MB
/dev/sda5 swap 896MB
/dev/sda2 fat32 5248MB
How do I allocate more space to the "/boot" directory?
I'm trying to upgrade from 9.10 to 10.04 and it says the "/boot" directory does not have enough free space, and that I need to free up 5mb more.
I checked my root dir, and I have 65Gb free.
I'm a Linux newbie but familiar with computers in general. I can install 9.4 64 bit (but no network to update from), but 10.4 and 10.10 both fail -- I cannot get the Allocate drive space screen to list the available drives. Just a blank panel. The drive is listed in the Boot loader panel. The LiveCD works. Disk utility and Gparted are both available. At one point I even managed to mount the 9.4 file system on the LiveCD, I think using "sudo mount"
View 2 Replies View RelatedSo I wanted to copy a copy-prod disk and decided to try dd after reading some information about it. after running dd for about a minute, I got a warning that I was low on disk space. I stopped dd and found I had only 200 MB left of 200 GB free space (originally having over 220 free). I deleted the 1/2 finished backups but cannot find the data which was written to the drive. It is hard to think that that much data could be written with my slow pc in under one minute.here are the commands I performed if that helps locate the data:
dd if=/dev/cdrom of=/mnt/disk/home/mark/pccheck.iso
dd if=/dev/cdrom of=/home/pccheck.iso
sudo dd if=/dev/cdrom of=/home/pccheck2.iso
i just installed ubuntu 9.10 onto my windows vista laptop. i ran ubuntu update manager but it tells me i'm low on disk space. system monitor tells me that i still have 50.2 GB of space but the problem is that i only have 68 MB left in my / File System. how can i increase disk space in / File System?
View 3 Replies View RelatedI've been trying to install ubuntu 11.04 64 bit on a partition next o windows 7 64 bit.When I use the default option (no matter how large I make the partition) I get the error message that not enough space could be created. I read this could e solved by defragmenting the hard drive which I did, but the problem persists.I next tried to partition manually but go the error message that there was "No root file system is de or something similar
View 4 Replies View RelatedWe have recently built some RAC (OS:RHEL55) servers and after the Oracle guys have installed their application, somehow the directory / is using the maximum space. I contacted the Oracle team & they say that their RAC installation doesn't create any files in the / directory. This is the o/p of '/' directory file system:
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/datavg-vol2 498M 382M 62M 88% /
Also, when I checked the file sizes, I found that the following files were taking more space:
/etc/selinux/targeted/modules/active/
-rw------ 1 root root 17M Nov1 base.linked
[code].....
I don't know what these files are doing there, when I did a cat and cheked, I found the files containing this data:
nf_tre--
stem_dbusd_var_run_t...and some stuff like this Unable to decide whether or not to remove these files. Also, is there any way to find out what files are taking more space and whether they can be deleted or not? in order to free up some space in the / direcoty. As there are 10 RACs that we've build, I got to do something to fix this for all of the 10 servers.