Ubuntu Installation :: Atleast 2.6GB Of Drive Space?
Jan 8, 2011
For some reason ubuntu will not install, as its saying that the 1.3gb of space is used up...yet there is a new 750gb seagate hooked up. bios reads the new hard drive. there are no other external/internal drives of any kind hooked up. here is a run down of what i have done...
disconnected old hard drive connected the new hard drive with the older cables put the 10.10 installation disc in boot drive it says i have the comp plugged into a power source and connected to the internet but it wont allow me to click the forward button because i dont have 2.6gb of drive space.
I downloaded the Ubuntu installer for windows and it gave me a pop-up saying: 256MB of memory are required for installation. Only 233MB are available. Installation may fail in such circumstances. Do you wish to continue anyway? This is an odd situation because when I finished installation of Ubuntu the first time (I uninstalled it,) it wasn't responsive and said my hard drive had 0 space on it. I still have about 23GB left on my disk. How do I clear out space so the installation can work properly?
I am attempting to install 10.10 over my 9.10 installation, but the installer says I don't have the required 2.6GB of free drive space. This problem only occurs with my 120GB SATA drive. If I plug in my old 80GB ATA drive (in a USB enclosure), there's no problem and I'm able to get past the installer's 3-point checklist.This is the first time I've encountered a problem like this and it seems as if no one else has encountered it yet. I can therefore not find this topic on any Linux forum, so I'm quite out in the cold.
My Ubuntu 11.04 installation took all 40GB of my hard drive space on my laptop, can GParted make a partition for extra space and make the installation smaller??
I have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
I've tried installing UNR on a 1GB flash drive in the past, and on two occasions it completely broke due to lack of disk space. When I say broke, it was when I was trying to install or upgrade packages, it said it ran out of disk space, everything slowed right down, and in the end I had to restart. I was put into a recovery shell and after poking around for about 30 minutes, gave up. Then reinstalled.
Now my shiny new 4GB flash drive is split into two sections, one for documents (1.9GB) and one for the installation+persistency file (1.9GB). I went about updating the UNR system, adding software I need (some of which is quite big, anti-virus software, lyx etc), and quickly found the old warning message: disk space low. hastily make some free space (apt-get clean, delete a big firefox cache), and post this message. My questions:how do I find out how much disk space is left on this 1.9GB partition - specifically the persistency file? I've tried disk usage analyzer, also du -h, but can't really understand it. I want to be able to see ahead of time when I am short of disk space. I would like to switch to using XFCE instead of gnome for speed and disk space. Is this possible? What is the best way to switch, without risking maxing-out disk space and crippling the system again? is there are way to take a snapshot of the whole partition? I would like to back it up in case it goes haywire again. Would I just want to copy the persistency file, that's it?
I've just downloaded 10.10, made install USB, removed the partition that used 10.04 (have home on an other partition), started the installation but the choice "install using free space" is removed from the installation. How can I install 10.10 using the free space on harddrive? WHY did they remove the choice "install using free space"
When I install and update software on Ubuntu, what is the location of those installation files. I'm going to install Ubuntu 10.04 LTS with 30 GB and wanna update huge collection of software. Is it enough or I need more space?
My plan is : boot = 130MB swap = 4096 MB / = 26000MB
Should I need separation of root(/). Like: /user, /tmp etc. If, then which media needs more space?? OR what should be the best choice?
i was using vista in my laptop, recently installed ubuntu in another drive partition which is 69 GB. but during ubuntu installation i gave only 16GB to ubuntu from this drive. i guess the remaining 69 GB - 16 GB = 53 GB is unused space now.. now how can i allocate all 69GB in that drive to ubuntu ?
when i first installed ubuntu i cut up 20 gb from one of my drives and put ubuntu in it, because i still had xp. Now i want to add extra space. can i do that ?
I want to install Ubuntu Karmic Koala using only 12gb of space for the os itself and the rest of my hard drive for free space. How do I do this? I do not have any other os on my computer at all and I do not have access to any other os.Right now my ubuntu installation is taking up 72gb of my hard drive. I have barely any free space.
I need to install Ubuntu inside of Windows XP, but the installer ask me to enter an (installation size) that should vary between 3 to 30GBs. I have an internal hard disk of 60GBs with 30GBs free. My question is if I allocated 30GBs for Ubuntu, would I be able to use this space in both Windows and Ubuntu? The only reason that I'm using the Wubi method is because I don't wand to lose space from portioning the hard drive.
I have just tried to install Ubuntu 10.10 and cannot find the facility to'install into the largest free space on the drive'Am I searching in vain? Is it somewhere I have missed or is it in a different form?
I have an Acer Aspire One that came with Windows 7 starter and 1GB of ram. I am currently trying to install Ubuntu 11.04 via USB drive. The problem that I am having is, whenever I get to the Allocate drive space screen it shows nothing. The box is pink with not text. If I click on Install now anyway I receive a No Root File System error. Currently the hard drive has NO partitions on it, including no file systems. It's completely blank and it is also showing up in my BIOS.
having trouble consolidating the free space on their Windows Vista partitions.
Most of the information you need is here: [URL]
The problem is that there may still be some system files running in the background that prevent all of your free space from consolidating. For some reason, I didn't find many partitioning guides that mention this.
If you find at Step 11 that your shrink space is still abnormally small, what you need to do is go back and open PerfectDisk. With "Consolidate Free Space" selected in the drop down box, click the "Boot Time" button. This allows PerfectDisk to consolidate free space while your hard drive is offline. Once this is done, go back to Step 10 and everything should work from there!
I regret to see the lack of facility for Guided install into the 'largest unpartitioned space on the drive'. I cannot find it either in the Desktop CD, or the Alternate CD. It seemed to disappear in Ubuntu 10.04 Desktop CD but did stay in the Alternate CD. But in 10.10 it seems to have gone completely.I found it a really *very* useful facility for myself, and also when helping others - when all I had to say to them was - 'delete the existing partition/s, do nothing more expect then, install using the facility 'Install into the largest unpartitioned space on the drive'.
I installed Ubuntu 9.04 on my latop. I have an older 80 gig HP laptop with Windows XP. Currently, i have XP as the NTFS drive and it takes up about 72 gigs of space, the swap drive for ubuntu is about 256 MB and the ext-3 drive is 2.5 gigs. However, i have no more hard drive space to run or instal any programs on Ubuntu. So what i need to do is decrease the NTFS drive as i still have over 30 gigs of free space on my laptop and increase the ext3 drive to about 10 or 15 gigs and increase the swap drive?
I've dual booted Ubuntu and Windows for years now and I've installed OSx86 on a separate drive which Grub2 picked up automagically and everything has been working great -- except I'm out of space. So I bought a 1.5 TB drive and installed win7 into sda1 (100MB NTFS bootloader for windows) and sda2 (50 GB NTFS windows drive). I now want to install two or three flavors of Linux. I'm thinking Ubuntu 10.04, Debian 5.05, and (if I'm bold enough) gentoo. each in 50GB partitions. I've already partitioned the drive a bit putting a 1.2 TB shared NTFS partition at the end (sda10), and a 2 GB swap parition just before that(sda9) My questions are:
(1) can all my linux distro's share that 2GB swap, or does each need it's own dedicated swap partition (installers generally assume you do)?
(2) can I re-partition space in the middle of the drive without messing with windows(sda1&2) and the shared part. (sda10)?
When I need to type in the password to get on a wifi network, the "connect" button is grayed out and unclickable until I've typed in 8 characters for the password, making it impossible to connect to networks with shorter passwords. I'm not sure if this problem is unique to 10.10 or not, I've been using linux for a couple years now and I've never tried to connect to a network with such a short password before until last weekend, after my friend figured out how to change his password from the one his ISP set for him.
I'm running Xubuntu 10.10 on an IBM T42 laptop, here's the relevant hardware from the lspci command, 02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03) 02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
I just bought a new HP desktop, and I want to install Debian on the hard drive. I ran the Windows program on the Debian CD to start the install.
I selected Manual drive setting, and resized the large C: partition to 50 GB. I want to install Debian in some of the free space, only their isn''t any free space! The 400+ GB I took out of the C: partition is labeled "unusable" instead of "free space."
If I double click the unusable space, I am just given the cylinder/head/sector numbers. How I can make that space usable?
I would boot my Gparted CD, but I don't know how to get to the BIOS. The boot screen goes right to Windows without showing me the key to get to the BIOS. I tried hitting DEL, but to no effect. Do you know what the HP computers use to interrupt the boot?
I am borrowing a friend's Eee PC 4G. Ubuntu eventually crashed because the hard drive filled up (even after all personal files had been removed). So now I'm trying to reinstall Ubuntu Netbook 10.10 from a bootable USB. Creating the USB worked fine and I managed to get all the way to the "Allocate drive space" screen. I opted to make no partitions and just use the entire disk space for the install. It tells me that 2 partitions will be deleted, which is fine. I then click Forward and it just hangs there endlessly, spinning its wheel. I suspect that the already-full hard drive may be causing problems. Is there any way around this so I can get the computer running again?
I have just installed Xubuntu and suprisingly it did not ask me to create a partition within its installer like Ubuntu does. So now, I am left with 150mb of free space. I want to expand that amount. The problem is, I do not know where it has been installed on. I have a C and an E drive. Currently, the C drive is mounted and the E drive will not mount even if i press the mount button. Does anyone have a solution?
I have about 128 GiB of unallocated space on /dev/sdb (which is a physical hard drive). I want to take 60 GiB of this space and add it to an lvm2 partition of /dev/sda.
#1. Is there a way to have a partition span two drives? If so, please explain.
#2. LVM2 IS NOT SUPPORTED BY GPARTED. DON'T ASK.
#3. If the answer to question 1 is yes, is is easy (or possible) to do it to an lvm2 partition?
On the Ubuntu website, they have a screenshot of installing 11.04 from 10.04. The options are: Install 11.04 alongside 10.04, Upgrade 10.04 to 11.04, Erase 10.04 and reinstall, Something else. Erase 10.04 and reinstall is the option I want, but that is not an option when I actually try to install it. The installer detected that I have Ubuntu 10.04 and Windows XP, and gave me the following options: Install 11.04 alongside both, Erase both OSes and install 11.04, Something else. I want to install 11.04 over 10.04 and leave Windows alone. I guess I have to do the partition stuff, but I don't want to screw anything up. Here's how my partitions are currently set up.
I'm a Linux newbie but familiar with computers in general. I can install 9.4 64 bit (but no network to update from), but 10.4 and 10.10 both fail -- I cannot get the Allocate drive space screen to list the available drives. Just a blank panel. The drive is listed in the Boot loader panel. The LiveCD works. Disk utility and Gparted are both available. At one point I even managed to mount the 9.4 file system on the LiveCD, I think using "sudo mount"
is the a way to compress the 699mb ubuntu iso to atleast 50mb -120mb. If its possible is there anyone holy enough to do it and upload it. I badly need 10.04 and since my last downloaded iso failed to install grrr and now have ran out of data bundles.
i made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
I was trying to install Fedora 13, on to my laptop. I have 30 GB of unallocated space in extended partition. When trying to install Fedora 13, I got stuck, as the installer says that there is no free space for installation.can convert the unallocated space into free space.
How do I get to take over some free space on my hard drive with ubuntu. Kparted let's me delete some partitions, but not take some over from existing partitions.
