I just installed server 10.10 64 bit edition on my server and I'm not able to boot from the hard drive. It just sits with a blinking cursor. Does anyone know what's going on or heard of this before? If I screwed something up during the install I can redo it, but I did ask it to install the boot loader. I know I have the correct hard drive selected as the boot device in the bios as well.
View 9 RepliesYet another "dual XP+Ubuntu" boot problem for everyone.
My neighbor wanted to try out Linux as he did not want to pay for Windows 7, so I offered to install Ubuntu as a dual boot. Ubuntu 9.10 boots and works fine, but now Windows XP will not boot. It just sits in a blank screen with flashing cursor after selecting Windows in Grub.
So, it is a Dell, originally with two partitions, one large one with Windows XP and a small one with HP's recovery partition. Here are my steps.
1. Using a Ubuntu 9.10 64-bit CD, I booted into a Live Ubuntu session.
2. Using GParted, I resized the Windows partition.
3. Installed / on the free space, did updates.
4. Delivered to neighbors house, showed them Ubuntu, and when I tried to restart into XP from Grub, I get a blank screen with flashing cursor.
I looked at the SuperGrubDisk and it seems to only work with Grub1, so I did not want to try as at least one OS boots and I did not want to risk messing up Ubuntu as well.
I have installed 10.04 Netbook remix, installation went find and rebooted..Now all i get is a black screen after bios finished loading. I guess it is something with the bootloader
View 9 Replies View RelatedMy PC hardware configuration -
1. Intel I5 processor (64 bit)
2. Intel DH55P J motherboard
3. 2TB hard-disk
I wanted to install only Ubuntu 10.04 (no windows) , I installed 10.04 Ubuntu and installation went fine. While booting up, it says boot device not detected. Then I tried to boot from CD, and checked /boot/grub folder, only 1 file is there grubenv. I hope I should have bunch of files in /boot/grub path.
So it looks grub2 was not installed properly. Then I followed instructions from [url] , still not able to resolve the issue.
First, a little background:
Laptop at issue: Toshiba Qosmio G25-av513
CD/DVD drive: Matshita DVD-RAM uj-845s
I attempted to do a proper install of Ubuntu 11.04 via booting of off CD. This failed because my CD/DVD drive is quirky and does not like burned CDs, though it likes factory pressed CDs just fine. I reattempted using a burned DVD, which almost worked, but my quirky drive just couldn't quite handle it. Replacing this drive is currently not an option, as I have no money for such things at this time.
I updated the CD/DVD drive firmware to 102D (apparently the most recent), but to no avail. I am comfortable with tearing apart electronics, so if anyone has knowledgeable suggestions about any kind of maintenance I could do to the drive I would be happy to hear it. Also, a (cheap!) factory pressed Ubuntu CD could work as well. Are such things available?
I further attempted booting via flash drive, but this failed as well, despite changing BIOS settings. If anyone has any useful suggestions on this, I would be happy to hear them. I attempted installation within Windows XP and was successful, though this is not an optimal solution. I have a second 60GB hard drive in this laptop that I would like to devote to a proper installation of Linux. It seems like I should be able to do this from within the current Ubuntu installation, but I am unsure of how to proceed.
When I boot from the CD I don't get the normal choices to install. The only 2 choices I get are;
"Try Ubuntu without any change to your computer" and
"Live-Install"
I click on Live-install, and I get a boot loader box that has live-install in it and a OK click box i click ok and nothing happens.
I have a Toshiba Satellite A55-S106 with a bad CD-ROM. It can't boot to USB, so I've taken to doing PXE installs.I had done a PXE install for 9.10. After the install, GRUB told me that it couldn't find the UUID. I was able to edit the grub config file and remove references to the UUID and it booted okay.I tried to do an upgrade from 9.10 to 10.04. The whole upgrade finished, and upon rebooting I saw the purple Ubuntu screen with the red dots, then a blank screen and no hard drive activity. I'm able to read the drive in a LiveCD Environment, but I can't figure out how to make it boot yet.
Fearing for the drive, I put a second hard drive in the laptop and installed 10.04 fresh, again using PXE. Same deal -- install finishes, purple screen, then blank screen and no hard drive activity.Here's a video of the laptop in action:v=T0VgfOA05T0 -- the status lights from left to right are "plugged in", "power on", and "hard drive".I feel like this is probably the same issue as before -- where I should go into GRUB and fix the issue, but I can't figure out how to get into GRUB in 10.04!Does anyone have any ideas as to what might be going on? I have some data on the first hard drive that I'd like -- not irreplaceable, but it would save me some time if I could get the drive to boot. (I apparently said "yeah, encrypting my home directory sounds like a great idea
I completely deleted NTFS as having a boring windows doesn't make any sense today, installed it with ext4:
/boot = 200MB
/swap = 1GB
/ = space left
After successful install, the BIOS screen with HP logo remains stuck, it won't boot anything in another words. I can't get the boot loader, nothing as if it awkwardly trying to boot from external data drive. Did my hard drive go poof? or did I miss something during install? How can I get my hd to read?
I recently did a fresh install of ubuntu 11.04 and seemed to have made a mistake with re-partitioning perhaps? I cant boot into windows anymore. I know all files are still there and intacct as I can access them from Ubuntu, but Something is wrong with the Booting of Windows now. I get to a screen which gives me system recovery options. When I perform the startup repair it scans for a few secnds and comes up with an error message "...System volume on disk is corrupt. Repair action: File system repair (chkdsk)...error code 0x1f" I even seems to have access to files on windows from this screen when I try a "Windows Complete system restore" It gives me the option to look on the hard drive or on a disk (I only have a Toshiba windows 7 upgrade disk and it doesnt seem to be helping)
View 9 Replies View RelatedI just installed 10.04 on a Dell Dimension T7500. I first set up linux partitions following first FAT16 (Dell Utilities) and second FAT32 (labeled OS) partitions. The installer suggested there was no OS when I was installing Ubuntu 10.04. After restart I see that the first option in boot order is "Onboard or USB CDROM drive". But Ubuntu never booted. I then changed boot order to first look in ID00 LUN0 ATA. Same thing..no boot of Ubuntu. On the other machines on which I've installed Ubuntu I have dual boot with Windows and have GRUB installed. So....how best to set this up and find out if I have a workable OS?
View 8 Replies View RelatedI am walking thin ice here: I have this ancient PC, that has so old BIOS who doesn't know how to boot from CD (but it has a CD drive). It has also floppy drive, but I don't have any floppies what to feed there, so for time being let's assume the floppy drive doesn't exist. It's got network PCMCIA card.
I have managed to install on it linux (there was Win98 before), it was quite a journey - I first installed boot manager (Smart Boot Manager) that would let to boot from CD (what a wonderful thing it is). That, in turn, let me install Damn Small Linux on the box.
But the story gets a bit sad here. Since I had to delete and reformat partitions, the MBR where there was Smart Boot Manager, was replaced by GRUB. As far as I know, GRUB, once it's loaded, does not give option to boot from CD. And I experience some strange problems when trying to install the Smart Boot Manager again (this time from linux) - even superuser gets "Permission denied" error message.
So basically now I have no way to install other Linux distro (Damn Small Linux is smart but with ugly looks. I want to try Xcfe-d DSL, wich comes under name Luitlinux.
So, my question is - is there any way how to boot from CD drive, or ISO image, without rebooting PC? If not, then the only alternative is to find a floppy and burn the Smart Boot Manager on it, boot from that floppy, and then boot from whatever CD.
The hardware is a psystar box with 2 drives for os x and ubuntu respectively. I attempted install of ubuntu over older version of xubunut without physically disconnecting the os x drive After install I could not boot into either system. THEN I remembered something about the install problem that 10.4 has and installed ubuntu again, this time following the instruction regarding booloader install. Now I can boot ubunut fine, but of course when I select drive holing os x it hangs on 'Verifying DMI pool data....' I've been looking at some thread on here about dual boot problems with Win7 and such, but are any of the recommended diagnostic and repair steps relevant to my case, specifically testdisk and bootinfo scripts?
View 1 Replies View Relateddell support thread was a damn joke, i m trying to put ubuntu on a new dell inspiron m5010 using wubi. everything was going great untill after the install on reboot the login screen takes 5 min to fully load. after i log in, it takes another like 5-10 min to fully load. i already tried pci=noacpi that did nothing. i tried loading in ubuntu classic (with no effects) that helped some, but still slow. any thoughts?
dell inspiron m5010 (64bit sys)
amd phenom(tm)IIn850 tripple-core 2.20ghz
ati mobility radeon hd 4250
i decided to install ubuntu in my PC,i downloaded the .ISO image and i installed it in my USB. After trying it and all that i observed that i really liked it and i decided to formally install it to my computer in the hard drive. When i reached the partition thing,i selected to dual boot with Vista and select between each them in every startup,when i clicked FORWARD it gave me an error which i did not read(because,again im a noob) so i clicked cancel.
Today i wanted to go through the process again and now really install it,so again i went to the time zone part and i clicked forward but then,instead of taking me straight to the partition phase,it appeard a window saying "The installer has detected that the following disks have mounted partitions: /dev/sda ...." I clicked yes,to unmount this partitions so it took me to the partition thing,once there i selected the option to install Ubuntu with Vista and select between them i neach startup,then i clicked forward and went to the username/computer name process,once i finished i continued to the next part,the installation,but i selected to import all of my WIndows VIsta default user data,after that i clicked forward and went to the installation process,i went down stairs to eat soemthing while it finishes,i came back and it was finished,it asked me to reboot so i clicked in Restart Now.
When it tried to boot,appeared an error saying: Error: no such devide found: #################### Grub load(or something like that) grub rescue: and it was a command line,since there i havent been able to boot into vista or Ubuntu,im really scared because is the first thing related to OS installing ive done,so i booted my USB and ran the trial and right now im trying to find out what to do from that trial version.
I just went to the INSTALL UBUNTU 10.04 LTS application under the System>Administration Menu and found out that in the partition phase the Install and allow to select between both systems in eahc startup option,i dont know what to do,i foudn out that my HD has still all its data(MUsic/Videos/Folders/Programs/ect.)its just that i cannot boot from it. Also in GParted it appears as /dev/sda1/ and a warning icon besides it,also when i go into information, thers this warning there [URL]
I put Ubuntu 11.04 Natty Desktop Beta 1 on a flash drive using 7-zip and am trying to install it on a (this is all I know about it) an HP G71 laptop, but when I hit Esc (as instructed) to interrupt the boot process, when I hit USB DEVICE, It starts up with Windows.Is there a way to do a basic install with wubi without booting up from the drive?!?!?!?!
View 8 Replies View RelatedI am having trouble booting the install CD for Fedora 15? As soon as I select a boot option I get a grey screen with a blinking cursor even if I pick the option to use basic video. I have tried using the intel_iommu=off parameter which makes no difference.
I also seem to have a similar issue when trying to install Ubuntu 11.04 on this machine too. I am using a Athlon x2 5200+, 5GB Ram, ATI 3850 if that's.
I've now tried several times to install a fresh copy Fedora 13 i386 on my old Dell laptop, but each time I reboot the laptop I get the first-time welcome screen which asks you to create a user. When I re-enter my user info, it tells me that there's already a folder created for that user. After rebooting, I'm back to that screen. Does anyone know what's going on here?
View 2 Replies View RelatedWhile installation of openSUSE on machine already having winXP and Ubuntu, I chose "Edit partition setup", I also chose GRUB: change locaiton to "MBR" enabled installation summary was something like this, shrinking sda1 to 13.02 and sda5 to 12.3 Gb, swap partition to sda3 (old linux), root partition to sda6(old linux), then began installation, and after sometime, while shrinking done with sda5, when started with sda1, it showed the following error- Failure occured during following action: Shrinking partition /dev/sda1 to 13.03 GB (progress bar might not move) System error code was: -3027. Now, currenly, i am not able to have my winXp back, during booting it shows: error: no such partition grub rescue>_
View 7 Replies View RelatedI have cleaned-intall 11.4
After the installation, the KDE environment is not booting as the default, but runtime level 5 boot instead.
I have checked my installation and ensured to have KDE4 installed.
Please advise how to have KDE boot.
My graphics card is ATI Radeon Mobility X1400 on Acer Travelmate 4670.
I have two Lenovo laptops: One is a T410 now running on openSUSE 11.4 with KDE 4. I got my wireless, keyboard languages/layouts, upgraded firefox... The other, a V570, is currently running Ubuntu 11.4 and I'd like to install openSUSE 11.4 on it.
Here is what I did. Downloaded openSUSE-11.4-DVD-x86_64.iso from software.opensuse.org: Download openSUSE 11.4 (Direct link). md5 checksum is good (compared to checksum posted by caf4926). Burned to DVD using Brasero. Installed openSUSE on the T410 (did the media check first from the installation menu - it was ok). Install went well and system is running fine. I'm happy with it
This is the problem I'm having; tried it about 10 times now and every time it's the same. Using the same DVD, trying to install openSUSE 11.4 on the V570 machine; after turning on, it boots from the DVD and I get the following 3 lines and then the cursor just sits at the fourth and does not continue
ELILO boot: ..........
Loading kernel linux... done
Loading file initrd...done
Im probally just being a noob here but for the projects sake I thought it would be good to identify this problem. I have an old advent laptop and I tried to install Opensuse from DVD on it. I followed the installation as normal but when I tried to boot it said some sort of check was forced and then I have to enter the admin/root password upon doing this I got the message system repair # in red. I have tried to repair the system through the installation DVD and tried re-installing it but I still get the same message.
View 9 Replies View RelatedUbuntu 10.04.1 to prepare a USB flash drive for use as installation media for a new computer that's on the way. When the Linux kernel tries booting up on the flash drive, I get an error saying VFS: Cannot open root device "<NULL>" or unknown-block(8,1).Here's how I got to this point...Created bootable partition on the thumb drive.Put the following files onto the flash drive: initrd.gz, vmlinuz, and ubuntu-10.04.1-server-amd64.iso fromhttp://archive.ubuntu.com/ubuntu/dis...ages/hd-media/Install Grub2 to the drive via grub-install.Put the following into boot/grub/grub.cfg:
Code:
set timeout=120
set default=0
[code]....
I am currently running all my applications off a HD as I was unable to install the grub bootloader on my ocz pci express card (grub won't install on the pci express card as it is a raid0 array). I would like to use the HD for backup only and run everything off the ocz card - with the exception of booting (which is unfortunate but I didn't manage to make the pci express card boot). How is it possible to tell suse during the installation to create the /boot on the HD and the rest on the pci express card and also to allocate the remainder of the HD as empty storage area??
View 1 Replies View RelatedI recently tried to upgrade my openSuSe 11.1 system using the instructions at:
SDB:System upgrade - openSUSE
I successfully got the system to 11.2, but the upgrade from 11.2->11.3 went awry. The installation froze during the update, and I had to start it over. The first issue I had to deal with was the fact that rpm had been upgraded and zypper hadn't, so zypper wouldn't function because older rpm files that it would search for had been deleted. After rolling back rpm to a previous version, I managed to complete the upgrade to 11.3 and everything looked good. However, when I rebooted the system, it hangs at a blank screen. More precisely, the system seems to get through all of the BIOS stuff and then hang while loading the OS (I assume). Although I've worked on Windows boxes for a long time, I'm a complete novice at OS installations/upgrades for Linux systems, so I'm not even quite sure where to begin to troubleshoot this. Ideally, I'd like to be able to fix the installation on the system to save the data on the hard drives, but I realize this might not be possible. My first thought was to use a recovery tool that I'd seen on some Linux installation CDs, but I see that for openSuSe 11.3 and on that utility has been dropped. I can, however, use the disk to get to the "Rescue" command prompt, so maybe there's something I can do from there?
I've just finished booting my system via Live CD, and installing 10.04-1 to existing partitions on a hardware RAID. The install went fine but when I rebooted I didn't get past the BIOS output screens.I used four existing partitions for the install: /home (MyRAID3, which was kept as-is), / (MyRAID2, which was reformatted) , /boot (MyRAID1, also reformatted) and swap.
View 9 Replies View RelatedI updated from 10.04 to 10.10. Ubuntu works fine, but Vista does not boot anymore. If i select it from the GRUB menu the Pc just go silent and does nothing till I press Ctrl+Alt+Canc.
Here is my fdisk -l
Code:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
code....
After I've installed OpenSuse i don't get to desktop, instead i get to this: ImageShack® - Online Photo and Video Hosting
And that's all i get. If i login i just get to do commands. I'm a first timer so I have no freaking idea what I'm doing wrong. I just want to get to desktop.
im installing ubuntu 10.04 on intel mother board. it is installing everything good. after completing the installation system is rebooting and then after restart it is not booting just strucked as blank.
View 1 Replies View RelatedI installed Ubuntu 10.10 along side of Win 7 and now I can't boot into Win 7. (Win 7 is listed on boot menu, but is not accessible).
How do I fix this? I need to access Win 7.
I downloaded the minimal boot image and installation CDs for F12 i386. On booting either I get the following messages:
Code:
This kernel requires the following features not present on the CPU:
cmov
Unable to boot - please use a kernel appropriate for your CPU
Looks to me like the installation media for i386 doesn't have an i386 kernel! I'm trying to install to an i586 CPU.