Ubuntu Installation :: 10.04 /dev/md0 Doesn't Exist When Grub2 Tries To Access It
May 1, 2010
I have installed Lucid Lynx more than a dozen times in the past thirty hours and I've almost got it working with RAID. The current problem is with /dev/md0 not existing when grub2 tries to access it. When I boot from the alternate CD in rescue mode, Ubuntu sees /dev/md0 as a software RAID array and I can access the files accordingly. When I boot from the grub2 bootloader, it sits for a while before spitting out "Gave up waiting for root device" and tossing me into the initramfs shell where I can see that /dev/md0 doesn't (yet) exist. What can I change within grub2's configuration to inspire it to start /dev/md0 before trying to mount it?
View 6 Replies
ADVERTISEMENT
May 10, 2010
I just installed 10.04 over my previous dual boot with Windows7 and 9.10. Went well. Now, in the Grub2 menu, there are like 14 kernels. I tried to find them in Synaptic to delete them, but they are not there! So, I went to grub.cfg and deleted the entries, updated grub, and they were back! How do I get rid of these entries?
View 6 Replies
View Related
Jun 17, 2010
In etc/grub I don't have 05_debian_theme, but I do have it in grub.d.old.
Because I'm such a huge noob I don't want to **** anything up, but I want to be able to change theme.
View 1 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Feb 12, 2010
I have a dual boot windows XP/ubuntu 9.10 set up on one hard drive. Everything was working fine. The 9.10 install had been updated from 9.04. I recently had problems with the XP partition (XP basically collapsed) so I re-installed XP on the same partition it was on before. I then attempted to reinstall Ubuntu ( I decided I wanted a new 'clean' installation of Ubuntu as well). When I got to the partition function it refused to recognize that there is a Windows partition, or a previous ubuntu partition, but states 'No operating system installed' or similar, and offers the entire hard drive for installation. When I look at the partitions using Windows partition software the Windows and the ubuntu partitions are clearly in evidence. I have also tried to reinstall GRUB but it doesn't appear to exist.
View 3 Replies
View Related
Aug 6, 2011
I have problem with installing GTK tools on openSUSE. And, the installation manual doesn't exist in GNOME websiteGetting ready for GNOME development
View 1 Replies
View Related
Oct 22, 2010
For some time now I have kept 2 partitions for (K)ubuntu versions so go back if the new one is troublesome.So, I have a common /boot partition, 2 partitions for (K)ubuntu versions and a common data partition which both versions can access.After installing 10.10 I lost the grub connection to the earlier version. This did not happen in the past. So far I've failed to get it back by various attempts to do so.Did I make a mistake in allowing the /boot partition to be formatted during install of 10.10 (can't remember what I did before) or has the /etc/grub.d/os_prober in 10.10 failed in some way?
View 3 Replies
View Related
Feb 6, 2010
I recently installed Ubuntu 9.10 onto my second hard drive, and now I can't boot into Vista (installed on hard drive #1). Grub2 just doesn't seem to be recognizing that there is a Windows Vista installation on the first hard drive.
I followed this guide (with Fabien's changes) because it seemed like they were having the exact same problem. But after rebooting, Vista is still not showing in the GRUB menu. In fact, the GRUB menu doesn't even show up unless I press Shift because it thinks that Ubuntu is the only OS installed on my computer.
My results with boot_info_script:
Code:
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=e94a058d-1d19-4a98-924b-1a5fce405bdd)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb sda1:
[Code]....
When I was installing Ubuntu to HD2 (the 500gb one), I got a peculiar message saying that Windows was installed on it. There wasn't anything on HD2 though, because Windows Vista was most definitely installed on HD1.
However, if I chose to overwrite HD1 with Ubuntu, the message wouldn't come up. It seemed like the installer was confused as to which hard drive actually held my Windows Vista install.
View 9 Replies
View Related
Dec 7, 2010
I'm installing Ubuntu server 10.04 LTS in several machines with identical hardware using clonezilla.Every thing is ok except than wen starting a cloned machine, grub waits the user to make a selection to boot from.The hard disk has 3 partition:
Device Boot Start End Blocks Id System
/dev/sda1 * 1 14 112423+ 83 Linux
/dev/sda2 15 1059 8393962+ 82 Linux swap / Solaris[code].....
how to do to start automaticaly? This is the content of grub configuration file (/boot/grub/grub.cfg)[code]...........
View 5 Replies
View Related
Feb 5, 2010
I have Ubuntu 9.10, PuppyLinux431 and Windows XP on a Toshiba laptop. I like Ubuntu, but the speed of PuppyLinux is addictive, so that was my default boot until I upgraded Ubuntu which included an upgrade to Grub2.
My problem: Grub2 doesn't recognise PuppyLinux. Using information from [url] I have made an executable file named 07_Puppy in /etc/grub.d and did update-grub from root. Still no luck. I can boot PuppyLinux from the grub command line using the following commands:
Just before grub displays the boot menu, I think I see a very brief message about a syntax error, but it's gone before I can read it.
Here is the contents of my grub.cfg:
Quote:
Why Grub2 doesn't see Puppy and let me boot it from the menu?
View 3 Replies
View Related
Aug 5, 2011
I'm attempting to triple boot Windows 7, Mac OS X, and Ubuntu 11.04 on non-Mac hardware. Chameleon is my primary bootloader, which is supposed to chainboot into grub2, but all I get when I choose the Linux boot option is a black screen with blinking cursor. If I try to boot Ubuntu while holding shift, I get the word GRUB, followed by a space and a blinking cursor. grub2 is installed to the Ubuntu partition, and attempts to reinstall it there or to the MBR from a LiveCD result in errors. The MBR and GPT partition tables are synchronized. How do I go about making Ubuntu bootable, without breaking my other two operating systems (or at least leaving them recoverable)?
I built a new desktop computer.The goal was to triple boot the system with Windows 7, Mac OS X Snow Leopard, and Ubuntu 11.04. This endeavor has been significantly more complicated than I originally expected, but with the of a forum-goer at InsanelyMac.com, I've managed to get pretty far with a complex installation process. I've attempted to get Ubuntu running using two methods, neither of them achieving what I'm hoping. Both methods follow.
In the first method, I install Mac OS X using a specially designed install CD that boots into the Snow Leopard installation DVD. The disk is partitioned to have a FAT partition, followed by a Mac OS X journaled partition, ending in a second FAT partition. Mac OS is then installed to the second partition. The Windows boot CD is then used to format the first FAT partition as NTFS, which Windows 7 is then installed to.
As I'm sure you know, this installs Windows Boot Manager. Then I boot into OS X using the boot CD mentioned earlier, and install Chameleon, a bootloader specifically designed for Hackintosh systems, and (supposedly) capable of booting into all three operating systems I'm trying to work with. Finally, I divide and reformat the remaining FAT partition into an ext4 partition and a swap partition, and install Ubuntu to that ext4 partition, with the bootloader installed to the same partition. This will break the Windows bootloader, as now the MBR and GPT tables are no longer syncronized. Ubuntu is also unbootable; attempting to chainload into grub2 leaves me at a black screen with a blinking cursor. The former problem is solved by booting into a LiveCD and installing and running gptsync. Windows is now bootable, but Ubuntu remains in 'limbo'.
The second method I attempted is very similar, but deviates in the last few steps. After installing Windows, I instead install Ubuntu 10.04 LTS, as I thought I might have fewer bootloader issues with that distribution (don't ask why; it was a lucky hunch).This breaks Windows Boot Manager, but this time grub2 throws me into the grub> prompt.I can boot into Ubuntu just fine using the set root/linux/initrd/boot commands, but my motherboard's Ethernet port is not detected by the OS, so I can't directly download and run gptsync. Once I do manage to run it, though, Windows is then also repaired.
Unfortunately, since I can't access the Internet, I can't do a distribution upgrade that way. Trying to upgrade from the recent release's LiveCD...well...doesn't upgrade, just overwrites. So I get the same black screen with blinking cursor problem. I've tried reinstalling grub2 through a LiveCD using grub-install both using the --root-directory flag and the chroot method.
System specifications:
Intel Core i7 (LGA1155)
Corsair VENGEANCE 4x4GB DDR3
[code]...
View 3 Replies
View Related
Feb 15, 2010
I installed Ubuntu9.10 on a USB hard drive attached to my laptop. Laptop has pre-installed XP in the in-built hard-drive. Point to be noted is that my hard-drive is protected via encryption software called Pointsec.
The installation of Ubuntu on the USB hard drive went through fine and I'm able to boot Ubuntu from it.
But now the problem is, GRUB2 fails to detect the Windows XP installation.
Can someone tell me how I can force GRUB2 to boot Windows XP from hd0,0?
The GRUB1 way of configuring /etc/grub/menu.lst does NOT seem to work with GRUB2.
View 9 Replies
View Related
Apr 26, 2010
I've just installed the 64 bit edition of 9.10 on my workstation. My raid drivers worked without any custom installation, which is very impressive! I am however having a problem installing grub2. I boot to the live CD, run the install process, resize and partition my free space as an ext4 primary partition with mount point /. Everything installs except grub, so I'm always booting in to windows.This seems to be a bit off as I've never had this occur with dual booting before.
View 9 Replies
View Related
Apr 30, 2010
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies
View Related
Aug 11, 2010
I have /dev/sda with Squeeze and Win 7 on it, and /dev/sdb with Squeeze. I've managed to get Grub 2 to boot from /dev/sdb1, but only by disabling /dev/sda from being a boot option in the BIOS. When it is available to boot, and lower priority than /dev/sdb, grub does not recognize the UUIds of the disks. So, I've disabled it for now and can boot from /dev/sdb no problems. Trouble is I cannot get Win7 to boot. Grub prints:
error: no such device: f0903a3a903a081c
error: invalid signature
When I boot into Squeeze and run 'blkid' I can see that:
/dev/sda1: LABEL="System Reserved" UUID="F0903A3A903A081C" TYPE="ntfs"
The Grub entry for Win 7 is:
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f0903a3a903a081c
chainloader +1
}
I don't understand how Grub 2 cannot recognize the UUIds. Can Grub 2 to be made to work with volume labels or just plain old /dev/... descriptions? Maybe I should give grub-legacy a go.
View 9 Replies
View Related
Jan 17, 2009
I am trying to install my laptop in a triple-boot configuration with Fedora 10, Windows XP and Windows 7 beta. I did already installed them in that order. This is how it is layed out on the harddisk:
Now i want to use grub to present a menu at boot so i can select an OS. Because I installed XP last it boots straight into XP. I've understood i should be able to do the following:
All goes well until the last step (grub-install). It gives an error stating that /dev/sda doesn't exist, which is correct; It doesn't. I do have the "device" listed outside of the chrooted environment.
My question is: How do I get /dev/sda available in my chrooted environment?
View 3 Replies
View Related
Apr 2, 2010
I recently upgraded to 10.04, all went well. Except now Windows 7 does not load. It shows up on the grub menu, but when selected just hangs with blinking cursor?
[code]...
View 5 Replies
View Related
Apr 30, 2011
long story, I upgraded my system from maverick to natty, didn't like it so restored my system with a backup that I had done recently. after it rebooted I used gparted live CD to expand my partition, moving swap to the end of the HD, then when I rebooted grub didn't work so I booted with ubuntu live cd and reinstalled grub. then I booted normally but nautilus didn't work and had lots of problems. So I installed ubuntu again with ubuntu live cd, formating the partition and expanding it, no problems at all.But, I wanted my files back, so restored the system again, now the message that I get isQuote:
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
-Check rootdelay= (did the system wait for the right device?)
[code]....
View 9 Replies
View Related
Jul 5, 2010
My laptop has an Intel video card. Does Intel have open source drivers that are included in the kernel? I'm kind of curious because I do not have a xorg file, and I did not install any drivers as I had to on my nvidia desktop, yet all of my maximum resolutions come down accordingly.
I'm just curious on what exactly controls the video settings if xorg isn't in the picture.
Also - what relevance does the Fn keys have that probe for a 2nd monitor to Ubuntu? For example, I do not have a 2nd monitor attached, but if I hit Fn F8 over and over, sometimes it changes my resolution. Why is this? Why would that revert my resolution?
View 9 Replies
View Related
Jan 31, 2011
https://bugs.launchpad.net/unity/+bug/711098
View 1 Replies
View Related
Mar 7, 2010
i initilally installed ubuntu 9.10 then installed windows 7 ,then i recovered grub2 using livecd as told in the post [URL] i did "sudo update-grub" and got windows 7 menu entry but when i select that entry windows 7 does not load but the grub2 is reloaded again.
i cant boot to windows 7.
Windows 7 have 100 mb partition "System Reserved" the grub2 points to that partition but still windows 7 not loaded.
sudo fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x3c3a81f5
[Code]....
View 3 Replies
View Related
May 17, 2010
I went through so many post but I haven't found the proper answer yet hope you have an Idea1. Grub2 saves only Linux OS as last selected no Windows OS2.It is possible to boot into a cdrom (drive)?
View 2 Replies
View Related
Aug 17, 2010
I was just trying to get the now playing for banshee to show on conky but the way I was going to do it required me to make a wrapper for banshee.sh but I can't seem to find it or it doesn't exist.
View 4 Replies
View Related
Sep 28, 2010
I have a compiled program, a tagger to identify parts of text, which claims it does not exist.This executable has to be called by a generated script, which is how I ran into this issue. What are the reasons this error could show up?The executable was copied from another machine.The file does have execution privileges (it gives a proper not-allowed message without them)I've tried copying the file to a different location (same problem)I've tried replacing the file with a fresh copy (same problem)The file does exist. Opening it with pico shows a file with binary data.
View 4 Replies
View Related
Feb 16, 2010
Is it possible to have Archive Manager create the specified folder when I enter it into the path field? Like if I want to put something in "/Main/Sub1/Sub2" But "sub2" doesn't exist, can I just have Archive Manager create it and put the files there?
View 1 Replies
View Related
Apr 14, 2011
I'm using a dual boot system with kubuntu 10.10 and windows vista.When I try to copy files from kubuntu to a windows drive, I see no problem.But when I retsart to windows usually I can't see my files. Once or twice I have seen files I copied in kubuntu. The strange thing is that when I go to kubuntu again, I don't see files I have copied in windows drive.
View 2 Replies
View Related
Apr 11, 2016
I have had to revert my VM to a previous image (did something to screw it up) anyway I have to reinstall icedove into my VM and I noticed after doing: sudo apt-get update && sudo apt-get install icedove that icedove can't seem to be found in the libraries anymore and simply wont install.
View 14 Replies
View Related
Sep 14, 2010
For our class project we are going to use HyperTerminal to communicate to something we are building that is attached to our laptops using USB. We're supposed to use HyperTerminal.URL...I can't believe that a program that does the same thing doesn't exist in Linux. What programs that can do the same thing are available in Linux and Mac OSX?
View 5 Replies
View Related
Jul 30, 2010
i was assigned with a project to analyse the performance of ASSP mail filter engine.I am using Fedora 7 with KDE3.5. I need to install a lot of perl modules to run the assp.pl code.I was trying with all sorts of packages like src.rpm, ixxx.rpm, tar.gz, tar.bz2. All these packages doesnt work exactly. When i tried with rpm packages. I am getting this error.
/*
[root@localhost RPMs]# rpm -ivh cyrus-sasl-2.1.23-9.fc12.src.rpm
warning: cyrus-sasl-2.1.23-9.fc12.src.rpm: Header V3 RSA/SHA256 signature: NOKEY, key ID 57bbccba
1:cyrus-sasl warning: user mockbuild does not exist - using root
[code]....
So i checked for config.h file as given the directory but it was missing.I don't know why?
View 4 Replies
View Related
Oct 22, 2010
here is the most importent part of the file setup.shhere link to pastebin:http://pastebin.com/mwQ1UArHand here the part:
cd
chmod 777 ../bin/panel
cd ../bin/panel
[code]....
View 2 Replies
View Related
