I am wondering wheter the system will upgrade itself to stable when stable version comes out (in 14days) from 10.04 LTS Beta2, if I install it now? Or will I have to reinstall kubuntu then?
View 4 Replies
Upgraded to Lucid Beta2 on my 1000HE eee pc. Now unable to connect to wifi. Wifi searches, then decides it needs password. I enter the proper password and it searches again, but never connects. Here's the strange thing: Using latest 2.6.32.21-generic kernel, wifi will not connect. But, when I boot with 2.6.31.20-generic, wifi works fine.
View 1 Replies View RelatedToday I just tried a liveCD of lucid beta2. Unfortunately,just like with alpha5, all I got was a black screen, and nothing else. I tried to switch to terminal with crtl-alt-F1,F2... but it seems to be disabled (why?) I am running 9.10 on a Samsung r20 notebook, with an ATI-Radeon Xpress 1250. Since 10.4 is about to be released, and I really want to upgrade.
View 5 Replies View RelatedAnyone installed natty beta 2 from USB? Fails with errno 5 (io error) on me but ubuntu beta 2 worked fine with the same HD partition?
View 6 Replies View RelatedTried to install 10.4 Beta2 on my testing machine. Boots but then splash screen starts scrolling really fast though I can notice that 5 dots are moving so no hanging. It takes quite a while and then black screen appears (also scrolling) and I cannot read what's there; last line looks like a prompt. Alt-Ctrl-Del reboots the machine. So I cannot even enter Live mode.
This machine is about 7-8 y.o. P4 2.4GHz (i686) on Asus P4S333/c, 2.5GB ram, GeForce3-Ti200, latest bios 2003 but runs any Linux (I tried) and FreeBSD 9-CURRENT perfectly (Even win7 is installable...but runs badly). On newer machine same CD works fine. The machine is AthlonX2 2.3GHz on Asus M3N78-vm, 4GB ram, onboard chip GeForce8200, HDDs, DVD-RW - all SATA (AHCI). What could be wrong with my old machine? Does Ubuntu still support 96xx Nvidia driver?
How to upgrade to lucid beta2 from the command line. When I try 'sudo do-release-upgrade' I get this:
Checking for a new ubuntu release
Done Upgrade tool signature
Done Upgrade tool
[100%] 86.3kB/s 0s
Reading cache
Checking package manager
Reading package lists: Done
Reading state information: Done
Reading state information: Done
Reading state information: Done
Done downloading
Reading package lists: Done
Reading state information: Done
Reading state information: Done
Reading state information: Done
Updating repository information
WARNING: Failed to read mirror file
Third party sources disabled
Some third party entries in your sources.list were disabled. You can re-enable them after the upgrade with the 'software-properties' tool or your package manager.
Done downloading
Checking package manager
Reading package lists: Doneucid/main Packages: 90 ed Packages: 77
Reading state information: Done
Calculating the changes
Calculating the changes
Could not calculate the upgrade
An unresolvable problem occurred while calculating the upgrade:
E:Unable to correct problems, you have held broken packages.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the
'update-manager' package and include the files in
/var/log/dist-upgrade/ in the bug report.
Restoring original system state
Aborting
Reading package lists: Donem lucid-updates/restricted Packages: 94
Reading state information: Done
Reading state information: Done
Reading state information: Done
The first 2 don't apply as I'm on 9.10. I can't really remember if I have installed any unofficial software packages.
I have installed the ubuntu 10.04 beta 2. I have notice that it has high temperature. I have try the "top" in terminal. There are no high usage of CPU and Memory. but still get high temperature. same in karmic 9.1. I have been using this ubuntu 10.04 beta2 fresh install just today. I did not do anything or install anything. It gets hot easily after few minutes. It was installed properly and no problem.
2nd problem is I try to reboot then i see the wifi signal and it detects my wifi and also my accesspoint. so I try to connect. I was connected to my accesspoint. My accesspoint is near my side. then I click firefox to test the connection. but no luck. cannot display page. maybe the internet was block even i was connected to my accesspoint. I try to check the signal then I saw (88%).
A bit daft, but here goes. I am running Beta2, with only a few minor problems. I am already using the Lucid repos.
Am I correcet in assuming that, I will auto goto the distu release, on Thurs?
Or should I, get the disk and upgrade normally?
Today I've installed Debian Squeeze Beta2. During the net-installation everything was fine. After the installation my login screen is too slow: booting up the the login graphics may take several minutes and when it is done, the keyboard is delayed or not responsive. When I switch to tty, before the activation of the cursor (that is, before I can type anything at the login prompt because the keyboard does not respond), appears this message.
[drm] nouveau 0000:05:00.0 GPU lockup - switching to software fbcon
Then I can login into the terminal. LSPCI say that 05:00 is the graphics card, an INVIDIA GeForce 8800 gtx that worked on Debian Lenny.
I upgraded a week ago to ubuntu 10.10 (amd64). I was unable to boot in 2.6.35-22 so I have been using 2.6.32-25. I tried again last night after installing updates to 2.6.35-22. Still no luck.I gave up since this was much like what happened a week ago and I couldn't find any solutions then. (I ran memtest then.)
View 3 Replies View RelatedThe software manager has been nagging me to upgrade from 9.10 to 10.04 for some time now. I finally gave in and clicked on Upgrade. After the upgrade completed, my computer won't start. It just flashes Ubuntu for a split second and goes to a black screen. I happen to have the 10.04 CD from Canonical, and I tried that, and it won't launch the installer either; just a logo and a black screen. Since I can't even get to the terminal to diagnose and fix whatever's wrong, I'm installing 9.10 from the CD that I ordered from Canonical a long time ago. I went through all the graphical options just like the first time I installed 9.10, and it's in the process of installing right now.
I don't really have time to futz with it because I need my laptop for when I go and visit my mum for Thanksgiving. Maybe I'll try after the holidays if I can get some feedback on what might have gone wrong with 10.04.
I've looked in the grub.cfg file, and it has :
Code:
#
### BEGIN /etc/grub.d/30_os-prober ###
[code]....
I have a 10.04 installation upgraded from 9.10 somewhere around the first beta.However, since a couple weeks I have the problem that I cannot use nano anymore.
Code:
mypc:~$ nano
Segmentation fault
I've tried to do apt-get remove nano then installed but stil the same,Even tried apt-get purge but with no avail.
I upgraded 9.10 to 10.04 and now it won't boot. The way 9.10 used to boot was after turning on the computer it would go through the bios screen and then a screen would come up and list both operating systems, Windows Xp and Ubuntu. XP would be highlighted and would normally boot if I did not change the highlighted area. If I changed the highlighted area to Ubuntu it would boot into Ubuntu 9.10. Now after doing the upgrade, it gets to the same screen with the two operating systems listed.
When I change the highlighted to Ubuntu an error message is briefly displayed and then it goes back to the screen that lists both operating systems. I think the error message says something like couldn't find Ubuntu, or something similiar to that. Windows XP runs fine when I highlight Windows XP in that first screen, but I want to be able to run Ubuntu. I have Ubuntu on a secondary drive, but shouldn't it have rewritten the upgraded files on that same drive that had 9.10 on it?
I upgraded the Ubuntu 10.04, and afterwards I can't print. Cups won't detect printers, hp-setup won't, hp-probe won't. Tried rebooting, reinstalling HPLIP, & CUPS. Installed latest version of HPLIP. did a purge of HPLIP and CUPS, and reinstalled, rebooted.
View 4 Replies View RelatedI had upgraded to 10.04 but can not use kernel 2.6.32-22.32+, I had to go back to kernel 2.6.31-21. because of the default video driver had change from the one kernel to the other, and I do not know how the correct it. In 2.6.32-22 the font would change and to a smaller size and I can barely view anything because it looks like some two year old puke a box of crayons all over the screen.
Second issue is it does not matter what power-saving mode I am in, in 5 minutes time it with go into suspension. Or right after coming out of hibernate, it will go into suspension indefinitely and no coming out of it and must to a hard boot.
i just upgraded from 9.10 to 10.04 and now i cant get win xp to boot. win xp will show up on the grub list but when i select it all i get is a blank screen with a cursor flashing in the top left corner. i dunno whats happend, i have never had many problems with dual boot.
View 6 Replies View RelatedUpgraded to MM and it boots, desktop and apps run but cannot access synaptic - gives brief error message. In terminal, ran "sudo apt-get update" and got this message:
Reading package lists... Error!
E: Problem parsing dependency Depends
E: Error occurred while processing gsfonts (NewVersion1)
E: Problem with MergeList /var/lib/dpkg/status
E: The package lists or status file could not be parsed or opened.
While using Ubuntu 10.04 my system worked perfectly, now that I've upgraded via the Upgrade Manager, there is no sound on my system. My computer is very Ubuntu friendly, as I've never had this problem with any other version of Ubuntu. What can I do? If I need to reinstall 10.04, or roll back to 10.04, how do I do that? If I can fix by reinstalling 10.10 how do I do that. I dual boot with Windows 7 Pro and Ubuntu 10.10.
View 1 Replies View RelatedSo I was on 8.04, and I decided to hit the upgrade button on the gui to upgrade to 10.04. Well the upgrade went fine and all...until I rebooted. Now I get this
Starting up .
mount: mounting none on /dev failed: No such device
udevd[984]: error getting socket: Invalid argument
error initializing netlink socket
udevd[984]: error initializing netlink socket
[Code]...
I found some other posts and tried adding the rootdelay=35 and acpi=off but those did not fix it. This is a virtual machine running on VMWare ESXi 4.1.
I have Lubuntu installed on my EEEP 1005HAB. I just successfully upgraded to Naughty Narwhal and it is asking me for my username and password. They don't work. I type my name and password in exactly like I did every time I logged in before, and nothing happens, it just gives me a blank username box again.
View 4 Replies View RelatedAfter upgrading to Ubuntu 11.04 I only get the text mode login. I have a ATI Radeon HD 3600 card and before upgrade I used the propiertary driver (to make the dual screen mode work).I have tried to download the driver again from ATI and installed that but it does not helped.I have put the Xorg.0.log and some other outputs in http://83.251.70.81/X/
View 3 Replies View RelatedI just loaded the new upgrade and now the top bar does not appear.
If the cursor moves over the top bar area the menus drop dow, but every else is black-- power button, wireless icon,... all gone.
How do I get these back?
I upgraded from 10.10 to 11.04 via the update manager and somehow in the middle of it, the package failed. And so I carried on using the ubuntu, rebooted and now the disk is not ready and cannot mount. Press S to skip or M for manual recovery. Skip does nothing, only can use manual recovery.I tried everything from the ubuntu forums & google from other people who had the same problem. The problem is my root terminal on manual recovery doesn't have networking.Only can use liveCD which I still can't connect to the internet because I use wlan0 from ndiswrapper.
I am a dual booter of Ubuntu 10.10 on one partition and Windows XP on other. I edited the grub to boot those. One HDD is partitioned into 2 drives so one partition holds XP and the other partition is a "translator" that holds files which both ubuntu and XP can access. (don't ask me why, I cleaned the dust off my PC recently after 3 years )My outputs are:
/boot/grub/menu.lst
Code:
title LINUX - Ubuntu 10.10 - kernel 2.6.35-28-generic
root (hd1,0)
kernel /boot/vmlinuz-2.6.35-28-generic root=UUID=85de06c5-cf3e-46b8-8c14-2c217be8dd9d ro vga=0x317 splash
initrd /boot/initrd.img-2.6.35-28-generic[code]....
- I commented the UUIDs, that doesn't work.
- I tried remounting it, no effect.
- I fsck'ed it, no effect.
- I booted using LiveCD but cannot connect to the internet due to wireless.
- Cannot apt-get update & upgrade due to no internet.
That's all I remember cos I basically tried alot different ways and cannot get it to boot.I am thinking of formatting the mess and start all over again but I don't really want to do that because it is a good system, just that the grub file and fstab is kinda cluttered.
I recently upgraded my vps from 8.04 to 11.04.
When I run apt-get upgrade I get
Code:
If I try apt-get install -f I get
Code:
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
Suggested packages:
The following NEW packages will be installed:
I've got a toshiba A135 series. I installed 9.10 from a live cd, and the installation process went fine.
When I rebooted the computer, it loaded up giving me the option to select one of the following:
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory text (memtest86+)
Memory test (memtest86+, serial console 115200)
I chose the first one, hit enter and the computer went to a black screen with the cursor up in the top left corner blinking away. Then nothing. I've read that this distribution is giving folks a lot of trouble. Has anyone had this same thing happen to them after a clean install?
I need to register some dll files in ubuntu. I used following command n it gives an error,
HTML Code:
Z:home haraka>regsvr32 "C:Program FilesUnion Assurance HRMAlerts.dll"
err:module:import_dll Library MSVBVM60.DLL (which is needed by L"C:\Program Files\Union Assurance HRM\Alerts.dll") not found
Failed to load DLL C:Program FilesUnion Assurance HRMAlerts.dll
I recently upgraded to the 9.10 version of Ubuntu. Now my screen freezes from time to time and I cannot click on anything. I must do a hard reboot by holding the power button of the PC. Is there a fix for this? Is there a way for me to go back to 9.4?
View 3 Replies View RelatedThis the second time it has happened after the security upgrade to kernel 2.6.31-19 with a clean shut down it goes into the grub menu and will not boot.
View 9 Replies View RelatedSo I decided to upgrade from 9.04 to 9.10 today, I was quite sure there wouldn't be no problems. Well, at least not in the installation, and apparently the system works well too, but there's just one thing...When I boot to the new kernel (2.6.31-19), it does show the new white Ubuntu-logo, but after it's gone, some text flashes through extremely fast, and after that the screen turns black, having two small and white horizontal lines on top of the screen. Soon after this, I can hear the login-window sound. I can log in by pressing enter, and then typing my password, and soon after I press enter again, I can hear the login sound. But still, the screen is black, having those same white horizontal lines on top of the screen, making the use of computer "quite" hard.Right now I'm using the older kernel, but the problem is that the sounds won't work, the resolution is still low like when I had 9.04 (problems with Intel hardware), and CD's won't still be read when inserted into the CD-drive.Here's my "lspci" in case someone wants to know of my hardware a little:
Code:
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev
[code]....
