How to turn OFF firewall. But how and ever, I noticed unlike the other distros ubuntu has a specific driver for my graphic card PNY nvidia GeForce under gnome system administration.
As soon as I selected that I lost my network connection. I did some trouble shooting and am concluding it has to be software setting to do with ubuntu more than likely some sort of firewall.
I was not able to ping anything. I could not even get my router's browser.
The very act of setting up the graphic must have thrown off the router settings.
I booted into the dual boot windows setup on the same system and WAS able to log into router ( no firewall installed ). True to enough, the router password and username were taken off. Now I can get a network with windows but the ubuntu that is on my hard drive still wont connect.
I can also use ubuntu live dvd to log in to network.
I have checked gnomes system authorizations but have not found anything helpful.
I have setup a static ip in /etc/network/interfaces and name server in /etc/resolv.conf
If this was windows I would reset tcp/ip but don't how this is done in Linux.
i m unable to ssh my one centos 5.6 remote server from my one server
Code:
ssh -v root@sxyz.abc.com OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for *
[code]...
i even turn off all firewall rules on both server i can able to ssh from my home or any other pc to remote pc so i don't think there is any problem in target pc
I suspect this is an initial configuration bug. All firewall logs seem to be going to all three files. That causes a lot of clutter in the log files, and makes it difficult to see whether there are any serious problems being logged.
I am learning to setup firewall in my home for that i have selected four system(sys1,sys2....sys4) for testing .I have configured sys2 to act as a firewall with two NIC. sys3 and sys4 are inside the firewall . sys1 is not connected to firewall for testing purpose.
the IP assignments are follows :
sys1 : ( fedora, not connected to firewall i am thinking, But i am not sure )
what happened is that sys1(not connected to firewall) can ssh to sys4(connected,inside firewall),since the rules are written not to ssh form sys1 to sys4..
then I came to know whatever the request I give, It directly goes as sys1 --> sys4. Not as sys1-----> sys2(firewall)---> sys4 .and the firewall is not filtering and processing anything for both inbound and outbound (i think it's my mistake some where). the requests are directly going inside without firewall.
I have Ubuntu 9.04, and a HP laserjet 1018 printer.
I install the printer using:
And when it ask me about plugin I give the path to it. (the 3.9.2 version of the plugin, because Ubuntu 9.04 has the 3.9.2 version of hplip)
well I install the printer, everything works perfectly.....but, when I turn off the PC, and turn it on again, the printer does NOT work!, I send work for being printed but mothing happens , Ubuntu tells me that the job was printed but ... no case, my printer does not print it.
I have to install it again since cero. what can I don to stop install it every time I turn off the computer ?
I'm trying to build firewall on Debian with 'Firewall Builder'. But it won't let me compile and run unless one interface is set as management. There are two interfaces on my computer: 'eth0' and 'lo'
I don't want to be able to configure firewall remotely, so could I use 'lo' as 'management interface'?
Samba is working correctly if Susefirewall2 is off. I have added Samba client and Samba Services for extern access but samba is not working when firewall is now on. Which services should I also add ?
After i shut it down it wont on back normally.the computer is just running but theres no input in monitor found.. it will only back to normal if i unplug it to the AVR before i turn it on..i know its just a small problem but i dont want to unplug it everytime to use my computer.
My ubuntu 10.04 doesnt want to turn off my PC (desktop) when I click turn off in the menu. I get no message, and I get no signs of higher system activity. This happens with turning off, rebooting, logging off user. However I can do it from terminal with admin rights.
What is the best (by best I mean most secure) firewall. I have had this urge since I went to a site which said it had a gnomenu icon, however google chrome said something which I didn't read i just killed chrome very quickly however it had a big red X and a red background so I guess it couldn't be good.
With 9.04UNR it was possible to turn off the touchpad in the mouse control but it doesn't appear to be there in in 10.04. Is that still possible with 10.04? If so, where do I look for it?
When I mistype a name of an executable program in terminal, ubuntu tries to search for similar programs in packages and then suggests names. This takes time, slowing down work and entirely useless for me. How to turn this feature off?
I personally can't even find a reason for implementing this feature and rather making it turned on by default. If someone needs a tool, he/she can search through packages.
I don't remember when it started, my ubuntu hang when trying to shut down.I tried every possible way to shut down, by command, poweroff, reboot, halt and In verbose mode the last message is: Code: init: rc main process ((process id e.g. "26350")) killed by TERM single and only way I have, to turn off is "Alt + Ctrl + delete"... and when I press them this message appear for a while then restart.
my laptop is an Acer5920G with an NVIDIA GeForce8600m GS video card. I am running Lucid Lynx on it. My problem is that I don't know how to turn the screen backlighting on - my screen seems to be on energy saving mode, i.e. quite dark. I somehow managed to turn the backlight back on the other day, but I have no idea how - and it went back to non-backlit mode a few days later. What should I do?
Wi-fi adapter is switched-off only in Windows or BIOS, and there is nothing built-in NetworkManager not able to do, put the different eee applets - not a solution either. It is worth Netbook Remix 10.10, asus eee 1001ha. All other shortcuts work fine (sorry for my english)
I use Ubuntu live and wanted to run the session with ACPI turned off So at boot-time using F6 I selected ACPI=off However, pstree -p shows, on line 2,: acpid(1817) So how do i really turn ACPI off?
When I boot it takes about 5 seconds for the firewire device (fw0) to load. I don't use firewire and I would like to disable it to help improve my boot time. My BIOS doesn't have an option to turn it off. Is there a way I can turn it off in Ubuntu?
Is there a GUI way of turning off and on the Screenlock? I saw a posting that said to run a command, but then how do I turn on screenlock again? Is there a GUI way with a simple switch, turn on/turn off?
How to turn off, that Ubuntu ask for password after a while? For example, I go away from the computer for 20 minutes, then I come back, but it asks for my password. How to turn it off?
I just installed ubuntu studio and it looks better than ever. I have an ice1712 soundcard and I have NEVER had it work on ANY linux distribution that used pulseaudio (I'm guessing that this problem has been around for at least two years) so I proceeded with my usual way of fixing things which is to just get rid of pulseaudio. Well it worked like a charm, uninstall pulseaudio, reboot and there's my sound. Here is my problem, I went to >system >preferences >sound to turn of the system sounds. I get a message, "waiting for sound system to respond" Does anyone know how I can make these sounds go away. I'm happy to try anything.
my PC running ubuntu goes to sleep whenever I don't type or use the mouse for a very short period of time when I have to reenter my password can I turn this facility off so that it doesnt go to sleep ?
The title says it all: my computer won't resume my current session after I suspend it. Nothing works, and I have to turn off the computer and start it again in order to log in.
P.S.: I'm using the latest version of ubuntu (11.04) P.S. II: I turn the pc off by hold the power buton for 3 - 5 secs. P.D. III: If I tap the power button, I can hear the pc start working, but the desktop stays blanked out.