I have a 4 disk software RAID array made up of Seagate drives. Let's name them sda, sdb, sdc, sdd. And let's say SDC is failing. Big question. How do i find out which of the 4 physical drives it is? They all look the same to me when i open up the PC case. Maybe some utility which will load up heavy usage on just one drive and i will try to put my finger on them and figure out which one is vibrating? Or maybe there is a smarter way?
after installing Ubuntu on one WD 500 GB hard disk and after making mistake and pasting wrong code into Terminal:my OTHER WD 500 GB hard disk that was also in the system (I guess it was "hd1") - died.The problem must be, I guess, I typed wrong code: "hd1,1" instead of "hd0,0".)500 GB (NTFS) of data was on that other (non-Ubuntu) hard disk, and now I can not access it anymore. While booting, system gives "Hard Disk Error" warning and stops.One again: I installed Ubuntu od one hard disk and at the end of instalation I pasted wrong code for GRUB, giving address of another hard disk. Now that other hard disk has error and will not work
I have a sata 320 gb with mandriva linux 2009.1 on it.And it is what curently atached to my cpu. It is shown as 'sda' in the partition table.I also have another 40gb hard disk with windows xp installed on it.It is shown as 'hda' in the partition table . Now what i want to do is attach this 40gb hard disk to my pc and configure grub on my 320gb hard disk('sda') so as to boot windows xp(which is residing on the second hard disk,'hda')Can anyone tell me if what im doing is feasible or not? If it is feasible,can anyone suggest me how to get it working. I know i just need to add 2-3 lines to my grub.conf, but dont know what exactly i need to write.
I had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
I was using Terminal and browsing a directory in my home folder. My "home" directory is located on "/dev/sdb1". When in Terminal I typed "ls" in one of my directories and the output was garbage. The output didn't show the files in the directory. I think it said something like, "input/output error". Unfortunately, I didn't write the exact error down. Instead I rebooted.The hard disk with the problem is:
Code: $ sudo hdparm -I /dev/sdb [sudo] password for brian:
As we know in Linux both SATA and eSATA disks are enumerated on /dev/sd[x] path. Is there a way using which i can identify if the device is an internal SATA or eSATA?
currently my disk-space is growing very-very fast and in the same time I have a very limited amount of it.Last time I had this kind of problem, I had MySql persistence replication is on and disabling the feature fix the problem. I don't know what happened between now and then, the space is shrinking rapidly (600Meg in couple of days) and I only downloaded files for less than 10Meg in the same period.
Could anybody give me a pointer to a tool that can oversee growing directories or files or maybe a script that able to do this (possibly involving Cron). I try using "Find" but I cannot find any files that are suspiciously growing. I suspect it's a directory that is growing, but I don't know.
Suppose during a script execution I am attaching one or two new disk having different vendor id to host machine, how do I know which disk corresponds to which file in /dev/ directory? i just want to perform some operation on those device from some script, how will i know which file in /dev directory correspond to which disk(having same size but different vendor id).
I am currently using windows xp, but I have acquired another hard drive and wish to install ubuntu to it, unfortunately i do not have a working cd drive. I have loaded the newest iso in daemon tools and it asks me if i want to install it in windows, or restart my computer to do a full install. i wish to do neither. i want to install a full copy to my other drive with the virtual cd drive. I have found alot of help dealing with installing it on the same drive as windows or something that would require a floppy drive. this task seems like it would be alot simpler than installing on the same drive, buy maybe not. Did i miss a tutorial somewhere?
My raid array has failed. I have two disks /dev/sda and /dev/sdb./dev/sdb has failed and I could not rebuild the array(madm returned that the device is busy) so I rebooted the machine. After that, the whole sdb disk went missing, as it now only shows sda in fdisk -l.Did the disk went totally dead or my raid glitched?
I want to create RAID disk on machine_2. Next, I want to replace one of the RAID disk from machine_2 to with the RAID disk from macnine_1. Then I want to build the RAID disk from machine_1 with machine_2 data. This is my question:
How to determine the physical drive the system boots on in a RAID array? Or How to determine the RAID disk from machine_1 in machine_2?
I am trying to figure out the "actual" disk size used by my system. When I run the "df -h" command,I am not taking here into consideration the shared memory of 2Gb as it is a sort of virtual shared memory and is not allocated physically. Is that correct ?
i would like to determine the hard drive partition associated with a directory. ie i have a disk partition as user with mount point Home. this i think contains my Home directory. a downloaded program resides in /usr/bin. now there is a /usr/local/bin with nothing in it. my question is how can i tell what disk partition /usr/bin resides on. if it is on my user defined partition i will not lose the program on a system install i think?
Ive been running VirtualBox with a windows XP installation for some time, on an opensuse 11.0 host for some time. Recently, however ive been having issues with suse, and want to take my virtual XP and make it a primary bootable physical partition, on a second disk
I know it can be done, but im not finding how exactly.
What ive tried so far. I've taken VBoxManage terminal tool and converted the VDI to a .img file, and tried to move that to my second physical disk, but it didnt work at all.
After some thinking, I booted to acronis true image within my virtual machine, and cloned the C:/ drive of windows over to my second hard drive. That got me further, but doesn't boot fully. Comes up to windows xp logo, and black screen boot loops.
Ive heard about using vditool to create a .raw file, and then go from there, but im at a loss to find vdi tool
How can i move my virtual machine to a physical, bootable partition on a second drive?
how easy it would be to read the contents of a physical disk that was part of a larger logical volume. The disk contains a "Linux LVM" partition that spans its entire size. My problem is that one of my disks died, and I have to send it back for a warranty replacement. However, the disk is dead, and I can't zero it out. I'm just trying to assess how difficult it would be (or at least how likely it would be) for a tech that's checking out the disk to get at the data.
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?
ran out of space in my /home dir. Have a second hard drive to install and would like to designate it as additional space for /home. I do not want to mount it as a dir inside my home I would like it to simply work as though my /home simply has more space available to it.
I was going to go ahead and intall Ubuntu 10.10 on my Windows XP w/sp3 Machine for a dual-boot config. I've done this before without issues but want to see what setup is Optimal giving my current disk drives.Here's my current setup in this picture. You can see I have my windows on Disk0 C: and the other 38GB on this drive Unallocated.
My other 80GB drive has Two 40GB windows file systems but I could erase one of those (Disk I to install Ubuntu on. Does it really matter? From what I recall Grub takes over fine and manages the boot. Thanks for any tips before install. Should I install on Unallocated on Disk0 or free up unallocated space on Disk1 for Install? thx
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
I created a thread about a problem a I had with my hard disk clicking whilst idle little while ago and I may now have stumbled upon a possible solution. The strange thing with the problem is that Ubuntu/Kubuntu didn't cause this problem but Opensuse 11.2 does.
I installed Fedora 13 to have a glimpse of what all the fuss was about and noticed that I had the same problem (hard disk clicking whilst idle ~ every 20 secs or so). Now there's a wiki on this subject and a few bug reports: [url]
Problem Description
Some ATA harddrives perform very frequent head unloads under Linux significantly shortening their lifespans. Root cause
The inactivity timer for head unload is configured too aggressively either via ATA APM (Advanced Power Management) feature or other non-standard means. Such aggressive settings are very fragile to changes in IO pattern and under Linux many such drives unload their heads only to re-load them shortly. Note that this relentless unloading/reloading cycle can also be triggered under Windows by installing programs which can alter the IO pattern (e.g. certain vaccine programs which runs in background).
Now two of the listed models with this problem are basically identical to my model (Dell Inspiron 1520) and basically share the same hardware: Dell Vostro 1500 and XPS 1520.
The workaround listed is to:
set APM to 254
Furthermore, there is a script: Storage-Fixup which can also be downloaded from opensuse software search. Indeed there is a report of this for a Vostro 1500: Gmane Loom
The report suggests looking at: Disk Power Management - openSUSE which lists a method to create a configuration file to management disk power management:
My question is whether I could download the storage-fixup rpm [url] has a description of it and it can be found: Software.openSUSE.org) and install it to (hopefully) solve the issue or should I follow the method given in: Disk Power Management - openSUSE
I'm trying to resize a partition on an IDE hard disk to use the entire disk but can not get more than a 309GB partition. I can get 295, 300, 301, 302GB, etc... fine but start getting problems with anything over 309GB. I get the following error with 310GB or more:
error: block relocator should have relocated 533 Warning: You should reinstall your boot loader before rebooting. Read section 4 of the Parted User documentation for more information. I am using Slackware 12.1, GNU parted 1.8.8, ext2 filesystem.
I am on F15 32-bit with GNOME 3. I keep getting "A Hard Disk Is Failing" warnings from the Disk Utility, very frequently. Is this a serious issue? Because I knew this to be a bug in Palimpsest DU back in F13/14. Also how can I disable any notifications from this application?
