Running The GNOME Panel 2.30.0, and since I'm using Avant Window Navigator, I'd like to hide the last panel.
I want to keep the shortcuts (like alt+f1, f2, etc...) so killing it isn't what I need.
I've been looking around but I always end up getting a 1px panel on top. Anyone has any suggestions for this?
I just moved my bottom panel to the right side of the screen and set it to auto-hide., The panel hid it'self but will not un-hide when I move the mouse to the edge of the screen... I tried to re-boot, but the panel is still "stuck"Is there an easy way to fix this? Or will I have to manualy delete the panel and make a new one
View 10 Replies View RelatedAfter I delete those screen-short software, my unity bar goes hide and never come, please help here is the picture which i delete. Now using classic desktop but i want to use unity but it comes only the full wallpaper and no bar comes. If i right click the mouse it works but where i can show the bar?
View 9 Replies View RelatedIs there anyway i can hide the top panel for maximized applications? It being gone reminds me of my X days I really dont want to..Also, I dont want to auto hide it, but just sent to background when an application is maximized. (i use chrome for browsing - when maximized the tabs are at the top and if set to auto hide, i keep revealing it while changing tabs which is annoying. )
View 6 Replies View RelatedI've been searching much for this, but have been unsuccessful. Is there any way to hide a panel on a certain virtual desktop, or have different panels displayed on different virtual desktops?
View 5 Replies View RelatedI want to add auto hide button or check-box to a panel. any way to do it ?
View 9 Replies View RelatedIs it possible to hide the gnome-panel on the fourth workspace?
View 2 Replies View Relatedis this possible? I can't find a answer for this question..
View 11 Replies View RelatedI like my bottom panel to auto hide. I have this setup on 2 computers. On one computer, it's much faster with hiding/showing than the other computer.Could it be a performance thing that effects it? mean, the one that's quicker is a quad core with 4gb of ram, whereas the one that's slower is a pentium 4 with 1gb of ram.
View 4 Replies View RelatedI have 2 drives formatted NTFS, which I'm mounting with /etc/fstab to ~/Movies/ and ~/Music/ and an EXT4 partition on my primary drive for games, mounted to ~/Roms/ and I would like for these drives to NOT show up in the side panel of nautilus.
I've been doing some looking around, and what I've found so far is that supposedly if you mount a partition/drive somewhere besides /media/ nautilus will ignore it. I'm finding this not to be the case, and it's driving me bonkers. here's my fstab:
Code:
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
[Code]...
I like to autohide my panel. But for some reason, it won't show unless I mouse over one of the bottom corners of the screen. The whole bottom edge where the panel hides should summon it if I mouse over, and I have been able to do this before, but now, after a system update, it only appears when I mouse over those bottom two corners. Does anyone else get this, or know how to fix it?
View 9 Replies View RelatedTo make Unity useful for me I need to make some changes. I wonder if it's possible to:
1. Hide the top panel or (better) remove it completely (I can live without global menu).
2. Make the Unity Launcher work like a panel - so it won't be possible to move windows behind it.
Is there a DBus command (or some other way from the command line) to toggle auto-hide on a panel in KDE Plasma? (I'm running KDE 4.6.)
I have a game I run in WINE that doesn't work right if it's autohidden and it would be nice to run it from a script that takes care of that for me.
I have the panel (taskbar) positioned on top. I then turned on "auto hide" in the panel properties (Gnome) to maximize the screen.The panel surely disappeared. The problem is that I cannot get it back no matter how much I hoover or click with the mouse - it is gone!...So how do I get it back??? I am rather new to Linux, but I figure that there should be a config file somewhere where I can set "auto hide" to false or something like this.
View 4 Replies View RelatedWhen I start the tightvncserver (vncserver -geometry 1600x1024 :1) and then connect to it with a vncviewer (tightvnc 1.3.0 on Win7 or vncviewer on 9.10) and then start a terminal (gnome-terminal or xterm) the m key it opens the envelope tab on the panel. The 's' key opens the shutdown applet.This did not happen on 9.10, or earlier
View 4 Replies View RelatedSomeone on the forums had me uninstall pulseaudio to get pSX working, and now I don't have a volume control icon on the panel and when choosing to add stuff to the panel it isn't available.I re-installed pulseaudio through the package manager, but I have a feeling it didn't install everything that uninstalled with it.
View 9 Replies View RelatedI have had this problem with all installations of Maverick Meerkat. Moving the default clock from the upper panel to the lower panel makes it bahave strangely. When clicked on, it now appears in the middle of the screen (sometimes even higher depending on resolution). This never happened prior to Maverick Meerkat.
How do I go about to fix this strange bug?
Attached is a screen shot of what I mean.
Regarding the gnome-panel in Ubuntu (64 bit).... I discovered some time ago that I wasn't the only one who routinely (every login) had their gnome-panel appear butchered, for which Alt-F2 then 'killall gnome-panel' would easily fix.
Having become impatient with this over the past 8 months, I decided I would automate the process and so cofiguring the startup applications seemed like a perfectly logical choice to me. Turns out I was wrong. After adding 'killall gnome-panel' to the startup applications not only does the panel fail to load altogether now, but Alt-F2 doesn't even work.
I tried Ctl-Alt-F1 and working with the graphics-free mode thinking I could somehow navigate to the startup apps config file and edit it, but I don't know where it is or how to edit it without logging in as root and I certainly don't know of any 'root password'.
How I can set that my left panel fit the top edge of the screen (instead of top panel)?
View 6 Replies View RelatedI'm new to Ubuntu and really like it so far, having come from a PC background up to now. I've installed it on my Acer laptop and all is well there. However, on my desktop, the screen resolution doesn't match the Ubuntu desktop and fonts and graphics are very blurry. The hardware I have is:
HP Compaq dx2450 micro-tower FE281EA
Samsung 23" widescreen monitor, native resolution 1680x1050
When I check the resolution using System > Preferences > Display it says that indeed I'm using 1680x1050, which should be correct. However, the bottom of the Ubuntu desktop is cut-off, below the bottom of the screen, so I can only see the very top edge of the bottom panel. The top panel is also slightly cut off, missing about the top 20% of the panel. Left and right seem to be in line OK. The resulting blurriness of fonts makes it fairly unusable until I get it fixed.
I've searched fairly extensively and I realise there are other threads on this so sorry for posting again, but they all seem to be slightly different problems and all the responses are fairly or very technical. Maybe I can't avoid a technical solution and getting my hands dirty with a terminal prompt, but I'm hoping I can fix this without resorting to stuff I don't understand and might get wrong. I'm a technically minded end-user but not a unix guy.
So I take a glance at the time, and realize the clock has been showing the same hour for ages.Basically, if I use the gnome-panel menu for launching empathy the panel freezes. The workaround that I use is switching off showing seconds and switching it on again on the date format menu of the panel. (I never used seconds on the date format, but that way you realize the panel is frozen)I've seen this behaviour in two diferent computers I use, any hint on what may cause this? Every applet keeps working as usual, but the menu display is frozen.I'm on 10.04, using version 2.30.2 of gnome. Steps to reproduce: click on the envelope icon of the menu and launch xat. It only happens the first time (when empathy is loaded) and it gets solved if you start empathy through sessions or whatever (The problem with the sessions workaround is that I can't manage to make it started without focus).
View 1 Replies View RelatedNo Top Panel or Unity Panel after 11.04 Upgrade from 10.10 and it does not seem to be a common problem.
View 3 Replies View RelatedAfter a fresh install of Fedora 12 I'm delivered to the image on the attachment. Well aside from not being able to see icons on the left, or go to the any terminal and not seeing anything and be forced to blind type and hope for the best there are some other issues. Enabling panel transparency shows video artefacts on the panel.nouveau doesn't enable 3D(I use a NVidia GeForce 9600 GT 512MB and my monitor is a ACER LCD X223W)) kind and point me to resources about the nouveau driver and how to configure it so it starts to work?
View 7 Replies View RelatedWhere can I find panel settings in order to modify transparency of the panel? I'm using openSuse 11.3 with KDE environment.
View 6 Replies View RelatedSo I just updated my IdeaPad to Natty and played around with Unity. The performane was absolutely unbearable so I installed Unity2D from the software center. Now when I start the session everything seems to be fine at first. Whenever I move the mouse over the panel though it seems to switch to my old gnome-panel from the "Classic" session (with some missing icons). When I move the mouse over that panel again it switches back to the Unity panel style. What is going on? Can I fix this somehow? I will have to use the classic session until I get a working consistent behavior
View 3 Replies View RelatedI just right clicked on my top panel and clicked on new panel, and it's created padding around my maximised windows and now panels show up :S:SS:S
View 6 Replies View RelatedDoes any one know how to get the name back on the gnome panel. It seems to have disappeared , I tried using the add to panel feature by right clicking on the panel but cannot locate it in the list.
View 5 Replies View RelatedI cannot move panel to top or add extra panel. Is there a way to do this?
View 2 Replies View RelatedI was messing around with the alternate character panel app and made a custom character set. I then wanted to put it on a new panel and created a new panel. I moved the character set to that panel, and then started to mess around with the panel settings (auto hide, show hide buttons, and expand, to be specific.) So far so good, until I moved the panel from the right side of the screen to the top. I already had a panel here, and it seemed not to like hiding a panel when there was already one on the top.
When the new panel hid itself, all my panels stopped responding (any clicks on them did nothing) and my processor started going at 100%. I tried a reboot and the only thing that changed is that now I can't even see my panels. I'm guessing I need to change the settings back manually through the prompt, but I don't know how to do that. I am using 10.04 and have not upgraded gnome since upgrading to 10.04.
Is it possible to install Gnome-panel in Xfce? I'd like to completely replace xfce-panel with gnome-panel. It is possible the other way round so maybe this way too?
[url]
I tried xfce4-XfApplet-plugin but it doesn't work the way I would like to.
