I have ubuntu install on a 500 gb drive. It says i have 409 gb free. I've been able to account for 40 gb, but when I try to check the folder proc, it lists 128 tb. How much space is this folder actually taking up?
View 1 Replies
When I reinstalled ubuntu I chose to encrypt my home folder (something that i've never done before) but now that I know it doesn't really make a difference i'd like to decrypt it because the .encryptfs folder is taking up so much space i'm getting notifications every time I log in.
View 7 Replies View RelatedI recently made the dumb mistake of using tar to make a backup of my "/" on my "/" when my "/" didn't have near enough space to store the backup. I received a warning message, so I canceled the terminal process and used nautilus to delete what amount of the backup had already been saved. That didn't seem to free up any space on my "/" like it should have, though. In an effort to find any hidden trash files that needed to be deleted, I used this terminal command:
[Code]...
Ubuntu 10.04.1 I was just tidying up my panel when I notice the Volume icon is taking up the space of two icons: I can right-click and Move it to the left or right
View 6 Replies View RelatedHow much space does Ubuntu 10.04 take?
I have a 320 GB HDD I use for data apart from the regular HDD for the OS. Of course when you go to format it, it's actually 298GB. So I made a 248 GB partition, ext4 for ubuntu data, and a 50GB partition for Windows.
It shows as 248.01 GiB in size in GParted, with 217.27 GiB used. 30.75GiB unused.
When I go to Computer, right click on the partition, click Properties, it says Total capacity 244.1 GB, 18.3 GB free, 225.8 GB Used.
So:
1) Why does GParted show it as 248GB and the Properties as 244 GB?
2) More importantly: Why does Gparted show I've used 217.27 GBs, while the Properties show I've used 225.8 GB? What's going on there?
I have and IBM e-Server, with 256RAM, however when I force the fedora installation to be perfomr in grapgical mode, Anaconda return a message that say that I dont have enoght Memory to perform the graphical installation. To my uderstanding It requiere 192MB of Memeory for a graphical installation.
What I'm doing wrong?, or is that the vmlinuz is booting into RAM and taking most of the space?
I have some confusion about one of my partition and the space it is taking. df -h output is given below;
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/ddf1_ADVDTARTINGp1
494G 18G 452G 4% /
[code]....
above information is showing that /var/lib/mysql partition total size is 379 GB and it is 68% used. However when I execute command du -sh /var/lib/mysql it shows following output.
# du -sh /var/lib/mysql
45G /var/lib/mysql
Now I want to know what files are taking space to make the partition 68% used. I want to list down all files in that partition with size.
I had this come up in logwatch: /dev/sda5 4.8G 3.6G 960M 80%/
Any ideas how I can find which files are suddenly taking up the space?
My company recently started bouncing all .Gifs back to our linux server. Is there a way on my end that i can block this from happening so it stops taking up space?
View 3 Replies View RelatedMy /var/ partition continues to fill up on all my servers, and it is because the logs in /var/log/apache2 or /var/log/mysql are being deleted during log rotate, but their file handles are being held open. Thus, a "du -sh /var/log" shows the correct values, but "df | grep /var" shows something much different.
It seems that the log files rotate, however if I run "lsof | grep deleted" it returns lots of files that are no longer visible in the directory, however refuse to clear themselves off the disk.
The only way I have found to make these log files go away (and thus clear up the disk space on the partition I should have) is to restart either apache or mysql, depending on which process has huge sized log files being held open.
Is it just me, or is this a big flaw in the way linux works, that it can't figure out how to release file handle for a log so the disk space can be reclaimed? This is happening to me a lot lately.
Here is some output from one of my web servers so you can see what I am seeing...
root@web49:~# df -h | grep /var$
Filesystem Size Used Avail Use% Mounted on
/dev/sda8 9.2G 6.1G 2.7G 70% /var
root@web49:~# du -sh /var
[Code]....
I used photorec to recover lost files and it brought up 70gb worth of files, when I was done looking through them I deleted these files. but these files still seem to be taking up my disk space. When I try to access my trash bin with root I get a message that reads...."The folder contents could not be displayed. sorry, could not display all the contents of "trash": operation not supported." if I open my trash bin when I'm not in root, the bin is empty.
How do I free up my disk space?
I'm working on a few servers running centos and using postfix. I don't know what the exact problem is, but we are having problems with the disk space being maxed out at 100 gigs. What we think the problem is...is that postfix is either caching or logging all the emails we send out. We sent 250k emails (500kb apiece) over the weekend and we were having trouble with that quantity. It seems some of those email were queued up for retry sending...but we didn't have sufficient disk space for that? Something broke - I'm not sure what.
What I want to do is to find and change the config file that has to do with postfix email retrying - possibly limit this (not sure if this will fix my problem). Or, turn off /limit any way that postfix logs/caches emails so that it won't take up all the disk space when queued up for retry... Again, I'm totally lost here (on both what's going on, and how to fix it). I'm not sure what more information is needed to address this problem
How to rename folder which contain space in foldername
Path : /root/Documents/untitled folder
I want to replace space with undersope how to do that
Output : /root/Documents/untitled_folder
through terminal any idea ?
I have installed ubuntu on my second hd, the size of is 500 GB.The live Ubuntu cd installation have used only 250 GB, the rest remains as NTFS system. And now I do need more space on my home folder, I would like to convert the 250 GB NTFS to Linux system and add it to my home folder. But I don't know how. I have looked at Disk Utilities, I have not found this possibility.
View 6 Replies View RelatedI am using Ubuntu in a laptop. The C disk has 15GB, and Windows is installed in C disk. I installed Netbook Ubuntu in D disk which only has 10GB free space. Now I am trying to install some applications in ubuntu such as emacs. But the system says it only has about 450Mb disk space. So how could I get more space? Can I install the applications under some different path? without using apt-get?
View 3 Replies View RelatedWas installing wine 1.2.2 on ubuntu 10.10 my home folder had 60GB of free space before the installation started I chose to install manually. I installed all the dependencies manually from terminal. Then compiled wine 1.2.2 from the source code using ./configue make While running the 'make' process my 60GB home folder ran out of disk space. The make process was non ending. Ultimately it got aborted due to lack of space. Can't retrieve disk space that was lost since then. Tried with terminal commands like
apt-get clean
apt-get autoclean
apt-get autoremove
Even tried to get into the wine source folder from terminal and use 'make uninstall' Nothing works and I now have only 50Mb of disk space on my home folder
I am running du -h --max-depth=1 and it is hanging, presumably processing a large folder.
Could you give me a list of the large folders in the Redhat OS?
Is there any way to check if du has failed or is hanging/processing a folder?
How long should du -h --max-depth=1 take on 40GB of data?
Solved, it was taking a long time on a 29gb /var/log folder
Below you'll see that my home server is currently maxed with something hidden.I noticed that my machine was maxed so i ran a du on / to see where the issue was happening. I freed up 6gbs so far and ~ciaranw keeps eating up any free disk space. But when i look to see what in the folder could be doing this, i get nothing back that accounts for the currently 19gbs thereI've been a long time user of forums but never found the need to actually post seeing as my problem was usually covered, this problem has stumped my googling prowess
[root@mordothebabyeater home]# df /
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
[code]....
Logical Memory Space of 4GB is divided in to 3GB User Space and 1GB Kernel Space. Always. Correct?
1. How can we change it? (just changing value of PAGE_OFFSET is okay?)
2. If system have only 256MB of memory (embedded system) and suppose Kernel Modules eat away all the memory during boot. User space will be left will no memory. Is this case possible?
i installed fedora kde 32 bit and iam realy loving it. but i want to resize my home partition as i got a message there is no space in my home folder i downloaded a Disk utility application .... to try and resize .... but looks like i dont know what to do
View 3 Replies View RelatedI have linux and windowsxp on one machine. I have only 3gigs free on the windowxp machine and 20gigs free on the linux machine. I want to transfer space from the linux box to the windows machine.Is this possible and what steps would I need to follow to do this?
View 1 Replies View Relatedi used gddrescure to clone an 80gb harddrive and this is the result ROFL.i guess you can only do this making sure the target drive is the same size, you see i didnt know lol so..i now have THIS problem.can anyone tell me how to turn my unallocated space into a usable 'free' space? i could play with gparted right now but i dont wanna do anything wrong, so if theres anyone who can tell me how to do this.
View 1 Replies View Relatedi made space by shrinking my window partition and so i have unallocated and would like to add to sda2 to have more space. Check out this pic. How can i do this?
View 1 Replies View RelatedI installed Ubuntu 10.10 with wubi and i have been enjoying my Ubuntu experience a lot. I installed quite a bit of programs and spent a couple hours customizing my machine. The problem is im running out of disc space. Any ideas on how i can add more space. I have gparted but i dont know where to move the free space to because wubi installed it.
View 1 Replies View Relatedmy home partition is an extended one, and when i want to create an unallocated space the space will stay in that extended partition. but there is also an 7 gb unallocated space which i want to merge with the other unallocated space. I also cannot extend that partition over that 7 gb. how can i overcome that problem?
i m also uploading a screenshot of gparted.[URL]..
I am developing a I2C CDROM client driver. The CDROM firmware supports TOC information read through a I2C command. It sends the TOC information in burst ( Interrupts a GPIO pin when it is ready ) and my CPU does a I2C read to read the TOC. When the CDROM firmware finishes sending the last data burst , it informs my CPU that it is done with the TOC, by a flag in the last data burst. I would like to know, which is the most efficinet way I can send these TOC information to userspace?
View 4 Replies View RelatedI am writing device driver in which i have to call callback function from kernel space, which are saving my data. But the callback functions are in userspace. While accessing them i am getting segmentation fault.
View 1 Replies View RelatedI wanna write a file in kernel space but from my searching I can to know that instead of writeing file in kernel space ,I can write data to user space by copy_to_user space.
But link is missing ...I dont know how will my user space will access kernel space means my function in kernel space which will do copy_to_user /....How my user space function will call my kernel level function ..
Can any one of you provide me with some example file which are doing this .I know every char driver is using it ...but i could not trace back how user level function is accessing it ...i m confused between user space and kernel space.
Today I was installing a lot of software since I'm just setting up my Slackware system again after a fresh install, and I realized that my root partition has very little space left.
Here is the output of df -h:
Code:
As you can see, I have a 20G (19G here for some reason) root partition, 8G /var, and 86G of /home. I thought this would be plenty since many recent recommendations for / are 10-15G. Now, though, 17G are used up for some reason! How is this possible? I thought a full slackware install only had about 4G of software! I don't have any music or movies or any crazy huge files that I know of, and those would be in my /home directory anyway. Is there any way I can see which files are taking up all this space?
If it's necessary to allocate more space to my / partition, is it still possible to boot up a GParted live Cd, shrink /home a bit, move some partitions to the right, and expand my root partition? I would REALLY prefer I don't have to reinstall since I just spent a ton of time setting up my system again, but if worst comes to worst ... :'-(
In case you're curious, here's my /etc/fstab:
Code:
How to use execv from kernel space to call a user space program writtenfor socket prog.
I tried to write code for socket in kernel but its not working.
Socket code in kernel is also needed.
