Well to make this straight forward as possible I want a program like The Hotspot Shield In Windows and Mac, Its uses's VPN (Virtual Private Network). To view Hulu (And other stuff). A link: [URL]. Or can I use it wine (I don't really think so, by the way I didn't test it out Because its blocked in my country).
View 4 Repliesi wish to install hotspot shield so help me to install hotspot shield & send me the link of software hotspot shield.
View 3 Replies View RelatedIs there any package similar to 'HOTSPOT SHIELD' ? in ubuntu, I used Hotspot in windows to unblock some sites, now with Ubuntu I am badly missing those sites.
View 5 Replies View RelatedI blocked several ports to stop HOTSPOT-Shield. but it have a lot of ip address and ports. stop Hotspot shield on my LAN.
View 3 Replies View RelatedI have openSUSE 11.2 installed and i need to create a gateway server that allows virtual private network connections. I want to play with my friends some lan games, but we are in different networks, so i want to create this gateway server so we can connect with VPN clients to this server and play freely.
View 7 Replies View RelatedI'm trying to setup a OpenVpn on my Ubuntu 10.04 and after doing the configs from here: [URL] I get an error:
[Code]....
Fedora 11 I have tried just about everything in webmin, the current one I am working with is openswan, and I get this error: ipsec newhostkey --configdir /etc/ipsec.d --output /etc/ipsec.secrets ipsec rsasigkey: key pair generation failed: "-8037"
My boss would like to have our employees connect to our linux server, then access their personal computers to work when they are unable to be in the office. Everyone else in the office uses winblows and they are unwilling to try anything else no matter what the benefit. The most important one is the CAD guy, we need him to work on drawings from school or his latest flings house and I am just running out of steam. how to fix this error or radically change my approach, I will try or do anything.
I have a virtual private server that I am trying to connect to using x11vnc. I ran this through ssh to setup gnome
sudo apt-get install gnome-core
sudo apt-get install gdm
sudo /etc/init.d/gdm start
sudo dpkg-reconfigure xserver-xorg
I later ran sudo apt-get install ubuntu-desktop to see if that would help.
Code:
#cat /etc/issue
Ubuntu 10.04.1 LTS
l
Code:
#sudo startx
Fatal server error:
xf860OpenConsole: Cannot open /dev/tty0 (No such file or directory)
I assume this is because it probably doesn't have a video card.
[Code]...
I'm probably dreaming, but I have a hobby project in mind that I would like feed I have an opportunity to purchase a 3 year old fully populated (14 x 3Ghz dual Xeon nodes) IBM bladecenter relatively inexpensively.I thought it would be fun to set it up as a beowulf cluster with open source xen and test the market to see what people would pay for Private virtual machines.
My thoughts are to use 64 bit Centos 5 as a base to get the beowulf cluster up and then load xen.I haven't really looked at the market but I figure I should be able to run 50 private virtual machines charging say $50 per month. I figure I can use rsync to backup the virtual machines to a different location. I plan to connect to linux based Network Storage running 3 x sata 1TB drives, probably via iSCSI. Along with the drive capacity currently on the blades I should get 2-3Tb online capacity over a Gbit network. (Cisco 14 + 4 network switch module)
I realise I have a bit of setup work to do and before I go investing a lot of time and a little money I'd appreciate some pragmatic advice as to why this may be a stupid venture.
I connected a USB Wireless Dongle (Sapido AU-4512S) on my Ubuntu 10.04 64bit. I wanted to share my wired internet connection from my pc to my friend's laptop.
So, I did the following:
1. Installed ndiswrapper-utils, ndiswrapper-common and ndisgtk in Synaptic Package Manager.
2. Installed Windows 7 64bit driver of my USB Dongle through Wireless Network Drivers(ndisgtk)
3. Now it says, net8192su -- Hardware present: Yes
4. Created a Ad-hoc connection clicking on Network Manager > create new wireless network..
5. Edited the Name, set Security to WEP 128-bit Passphrase and entered my desired password.
6. Finally clicked Create but it says "Wireless Connection disconnected"
I'm thinking about maybe the problem is with my dongle so I checked by using the command:
Code:
which gives me information about wlan0
The next thing I did worsen the situation. I unplugged the USB dongle ang plugged it again. This time,
Code:
gives me no result anymore.
Code:
Also, the option that says "create new wireless connection" disappeared in my Network Manager Applet now.
Now I have no problem. To restore the "Create new wireless connection" in my Network Manager Applet and finally create a wifi hotspot using my wired connection from pc.
Code:
Code:
My school has (once again) chosen to change their wireless network. This means it has gotten a lot slower, and that only our hotspot works. Our hotspot however is secured so that im unable to enter facebook, and a lot of other websites, etc. So what i did in windows was installing a program called hotspot shield, which redirects you ip through a server, so the LAN Admin basically have no control of what you're doing if he haven't got more skill than the one we have. I think what Hotspot shield does is making a vpn connection (correct me if im wrong) and i would certainly like to do that i ubuntu as well.
View 1 Replies View RelatedRecently upgraded my PC and my WiFi Hotspot connection is refusing to connect. Running a dmesg returns this
Code: Select all[66529.184299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66530.762594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
And the IPv6 configuration in the Hotspot is Ignore
i noticed that all files can be seen by another computer if the drive is accessed
can I stop this? can i set a private folder?
I am setting up a publicly exposed ssh server.uld like to require both password and private key. Does anyone know how to configure this
View 4 Replies View RelatedMy goal is to have users(Unix Users like root on host1) use evolution /sendmail to send and receive emails between users( Unix users either from host1 or any other host on n a private network. The network is a private network with a few servers without any connection to Internet and no DNS. They resolve one another by /etc/hosts. with smtp configured am able to send and receive emails on one machine(host1) from unix user abc on host1 to user xyz on host1 and vice versa. the commad i used to test is host1@abc #echo "this is a test mail" |mailx zyx@host1 But when i tried sending from user abc on host1 to user xyz on host2 its giving error for DNS unable to resolve hostname.
the commad i used to test is host1@abc# echo "this is a test mail" |mailx zyx@host2 create a simple sendmail config so that i can send mails between multiple hosts using unix usernames within one network. I can use one of the server as mail server and rest as clients. I dont want to configure any other softwares for pop or imap access. I want to keep it simple and use evolution on the clients to send emails between one another on the private network without internet.
I'm trying to make changes to several computers at once in a private network. I have ssh keys setup so that I can ssh from the main computer to all the other computers without having to enter my password. So I wrote a bash script like for computers in `cat computer list` do ssh $computers #type changes here exit done
but instead of executing the commands on every computer, it opens a shell on every computer for me to type into, just as if I had used ssh myself and not in a script. how to get this to work? I want to be able to add lines at the comment like "echo "test" > /testFile.txt" and be able to see the changes on each machine, in this case see testFile.txt on every machine.
i am totally new to Opensuse and to filezilla. I formerly used winscp - a windows-client for ssh.now i have a linux box and want to connect to the server via ssh ing filezilla.Can i use the same keys as i used in WinSCP - where should i store them and the third question.I read something about a certain so called certificate-file that has to be created!?
View 1 Replies View RelatedWe have to connect one PC in private network (campus) with other PC (mostly a modem in our case)in public network. Connection should be peer to peer like and we have to use C coding for establishing connection between this two systems. Is it possible if we use port forwarding or is there any other way?
View 2 Replies View RelatedThe facts are as follows:
1. I have at work a regular LAN with many PCs, each with a DNS-registered public IP. Therefore I am able to address each of these PCs by their fully-qualified names and, for instance, initiate ssh sessions to any of these computers just by typing "ssh <name_of_machine>" from a terminal.
2. Within the aforementioned LAN I have just created a private network with some clients, which access the LAN through a router (a D-link DIR-825). We have created this private network for many reasons, but most importantly because we need to guarantee that the hosts in this network will remain networked among them even if the LAN goes down for any reason (which unfortunately happens often). But we still need to have access to the hosts in the private network from the LAN.
3. I am able to define port forwarding rules in the router in order to access certain services on the private network's clients. For example. I am able to access (by ssh) hosts "H1" and "H2" on the private network from a client on the LAN by defining rules for forwarding ports "P1" and "P2" on the router's public IP to TCP port 22 on the private IPs of "H1" and "H2", respectively. Then I would access each of these hosts from the LAN by using:
>ssh -p P1 [ip.address.of.router] (for accessing H1) and >ssh -p P2 [ip.address.of.router] (for accessing H2)
4. The problem with the port forwarding approach is that it is not easily scalable. For instance, If I wanted to enable ssh access to each host in the private network, I would have to define a port forwarding rule for each machine, and then REMEMBER all these port rules when initiating a ssh session from the LAN in order to point to the right host. And the problem gets worse when considering more services in addition to ssh.
5. The ideal solution would be to be have a means for addressing each host in the private network individually, in much the same way in which I address the hosts in the LAN (which have DNS-registered names). For instance, in order to access hosts H1 and H2 as in the previous example, i would like to be able to just type
>ssh [name_of_host_H1] (for accessing H1) and >ssh [name_of_host_H2] (for accessing H2)
The bottom line:
I guess I can say that what I need is some kind of combined DNS-ing and routing that allows me to communicate with the hosts in the private network from outside of it in a transparent way.
The question is: what are any possible solutions for accomplishing this? I have searched the web and found stuff about things like VPNs, reverse-proxies and NAT servers, but I really can't understand if any of these could serve to solve my problem (BTW, isn't my router doing some sort of NAT-ing already? could I just add some DNS-ing in some way?)
I run a server that is connected to several other boxes in a private network (192.168.0.0). I have had no problems previously, but upon a reinstall of Debian squeeze I have no connectivity to the private network: a ping of other addresses on that network fail. Ping and connection to outside world is fine. This box is configured similarly to another on this private network which connects successfully. I have quadruple-checked all my basic information. I post my ifconfig below of the malfunctioning device, then the ifconfig for equivalent nic on a box connected succesfully to the private network.
Questions:
1.Could it be a cable problem? (I don't see how since the cables have not been changed I do not believe since my reinstallation).
2. What about the difference in the last lines of eth1 below and eth2 of the successful box. Is it significant that the bad eth1 reads Memory:fc3a0000-fc3c0000
I am new with IP tables stuff and i have a problem....
i have a pc Contain a fedora OS and i want to make a small network (4 PCs Contain XP OS) and using the pc of fedora OS as a firewall
i want to Prevent the ping (i think it called(ICMP)) in the privat network and prevent one of the PCs from Browsing Internet(prevent port 80 and 81 as i think)
and i still don't know how to make the Internet go Through the firewall to the private network...
note: WAN = eth0
LAN = eth1
I have 2 different networks: the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping [URL]... on the gateway machine, it works, while it doesn't work on the private network.
View 7 Replies View RelatedI have users using Windows XP, Windows 7, Linux (Fedora) and Mac. They all are in a single private network and all access internet through a Linux (RHEL5) system in which Squid acts as gateway. The same is true with my branch offices too except that private network is different and gateway system uses Fedora 9 instead of RHEL5. All the branch offices are connected through point to point leased lines with the head office for file transfer.
My requirement is this: I have a web server located at head office. Presently I am able to access this server from my branch offices through internet. I would like to access this server from branch offices through leased lines. This too I am able to access if I do routing in users system. The file transfer is taking place through one to one system at two ends by creating static routing in those systems.
My ISP has for a long time had a broken forward/reverese DNS so that my ADSL connection with static IP address resolves to a completely different IP address on a reverse query. This has not been a problem until I upgraded a remote server from 10.3 to 11.3 last weekend and now ssh connections from my ADSL connection to it using public/private keys are being rejected with the following message in /var/log/messages (IP addresses changed):
Aug 10 12:00:32 penguin1 sshd[1270]: Address 83.175.246.243 maps to 83-175-246-243.static.dsl.aupex.com, but this does not map back to the address - Possible Break in Attempt!
But if I log in interactively with username & password, the connection succeeds. I've changed the StrictModes setting in sshd_config to 'no' but this hasn't resolved the problem. Obviously something in 11.3 is being stricter about this IP mismatch than it was in 10.2 (and no, the server is not using a firewall). There must be something I can change to make sshd more permissive? I've tried before to get my ISP to fix their problem but no luck. This needs to be sorted as a server at my home (which does not run SuSE) retrieves backups from the remote OpenSuSE 11.3 server every night using scp and these are now failing.
Suppose that I am in a private network of computers (say each having ip addresses 192.168.. ). Some of the machines( we have no information regarding their ip, name and no physical access to the servers) in the network are connected to internet and they run an http proxy at some port say 3128. Is there a program which can be run on Windows or Linux which will give me the list of machines(ip addresses and ports if possible) acting as proxy servers?
View 1 Replies View RelatedI have 2 different networks: the first one is gateway machine (eth0), and the second is a private machine (eth1). So, I've configured the iptables and forwarding stuff and when I try to ping google.com on the gateway machine, it works, while it doesn't work on the private network. Note: I am using VmWare 7. I need your quick assistance about this issue.
View 2 Replies View RelatedI've not found how to configure more than one ip address with network manager.Nor with kde nor with plasmoid network manager.I need several virtual ip addresses for eth0 when the "default" of eth0 is connected i.e. "Connected to Auto eth0" should initialize the virtual interfaces.I have not found no even how to configure the ip address.I think this will be used from ifup config in yast or not?There I have the virtual interfaces but they are not taken from network manager.And last but no least: Is it possible that when using network manager the eth0 is enabled even no user has logged in?
View 4 Replies View RelatedI've been trying to understand how Linux creates the network/interfaces on a machine (been reading the Linux admin guide), but as I'm pretty new to this subject, I've got lost in the forest.
To provide with my goal:
1.) Learn about network setups on Linux
2.) Be able to maintain my own (virtual) network
3.) Configure my (virtual) network
I have a server that is on both a standard network and a virtual network, as follows: server1 attached to standard network server1 acting as Dom0 with two linux DomU guests (under Xen) I only have one network card. How do I configure server1 to have a different hostname on the standard network than on the virtual network? Here are the relevant network configuration files for server1:
/etc/sysconfig/network-scripts/ifcfg-eth0:1
DEVICE=eth0:1
BOOTPROTO=none
NETMASK=255.255.255.0
IPADDR=192.168.122.9
[Code]...
while trying to set up Xen Virtual Nodes we encountered one issue with the network (which is why it is posted here On the DomU the interface is provided by a bonding -bond0- of three NICS. Now the Xen network script a) does not take this bonding b) destroyes even this bonding From a number of posts I assume I have to configure this by hand, correct? Is there an instruction how to do this? Simply create a bridge on top of bond0??
View 1 Replies View Related