GTK file chooser sometimes return error filename.
eg:
When i use GTK file choose dialog, select C.xml. it return B.pdf. when B.pdf, i got A.jpg.
Seems file node reduce 1?
And in my perl script, use an filechooserbutton, i always got this trouble now.
2.6.32-25-generic, but seems not business with kernel. i always upgrade to newest 10.04.
I open an ODS file and edit it and save, fine. But sometimes and for no readily apparent reason it refuses to save the document with the error message:"Error saving the document <filename>: Write error. The file could not be written". I have upgraded my version of OpenOffice but the issue remains. Once it starts with that error the only way to save the file is to actually abandon my change and restart OOffice. Today I lost an hours stuff as the auto save was also failing but not giving me any warning it was failing. I'm not sure if this is an OpenOffice, file system, Fedora or permissions issue though I've not noticed anything similar with other applications. Have set permissions to 777 but still get the error.
View 3 Replies View RelatedI'm sure this is just a simple configuration issue, but not sure what to configure:
When I try to open a file from within an application (eg Open Office) and I choose "Open", a file browser pops up that allows navigation of the file system. Rather annoyingly, it shows all the dot files (and directories). There was a time when it did not, and I'm not sure what changed to make it do this.
Where do I configure this behaviour? I don't know what the file browsing thing is called. If I get a listing from ps before and after calling up the file opening tool, there is nothing extra showing.
Actually i am working on an application in which i want to select the files from a File Chooser where the application language is set to Telugu. But when i want to view the files through the File Chooser, all the names of the files in the system are displaying as boxes. This problem occurs only when i change the language to Telugu.This problem doesn't appear with any other languages. So please direct me towards the solution for this problem.
View 6 Replies View RelatedIn both Slackware 12.2 (gtk 2.12.12) and Slackware 13.1 (gtk 2.18.9), the left-hand side panel of the GTK file chooser (File Open and Save) dialog box displays three sections. The first section contains two options: Search and Recently Used. The second section contains several options. The third section are personal bookmarks I have created and stored in $HOME/.gtk-bookmarks.
Modifying the bookmarks section is straightforward, but I am searching for ways to modify the first and second sections.
1. In both 12.2 and 13.1, the second section shows the following: $HOME directory, Desktop, File System. In 13.1, several mount points now appear. I think the criterion being used is the mount point being outside the main root tree. Several of these mount points are configured in fstab with the noauto option and are user mounted only as necessary. I do not want any of these volumes appearing in that section nor the Desktop option. Is there a way to exclude those volumes and options?
2. In that same second section are two mounted volumes from a second internal drive. Those two partitions are part of my bookmarks. In 12.2 those two partitions appeared in the bookmarks section. In 13.1 those two bookmarks are ignored and instead appear in the second section. I prefer those two points appear in my bookmarks section because I prefer my own labels rather than mount point names. Is there a way to do that?
3. Is there an option in $HOME/.config/gtk-2.0/filechooser.ini to control the width of the side panel?
There are these shortcuts in the GTK3 file chooser: [URL] ....
With the exception of "desktop" which I included in the red box by mistake, I don't want those shorcuts to be there. I've even deleted most of those folders from my home directory because I have no use for them, but the shortcuts remain even after the folders are gone.
How to remove/disable these shortcuts? And while I'm at it, I notice that it's not using my selected icon theme for those icons. Any way to make it use my choice of icon theme?
$ uname -a
Linux a 2.6.35.10-74.fc14.i686.PAE #1 SMP Thu Dec 23 16:10:47 UTC 2010 i686 i686 i386 GNU/Linux
$ lsb_release -a
LSB Version: :core-4.0-ia32:core-4.0-noarch
[Code].....
How can I set a pattern that will output a filename equal to the original filename? E.g.
something.mp3 → something.ogg
And why isn't this implemented in SoundConverter?
PS: {Filename} doesn't work.
My employer issues pdf files with everyones work schedules. I copy the content and save it as plain text in a file called unformatted (hope to be able to automate this step someday). Im working on a SED script that reduces unformatted to only display what I want to see and saves the result in a file Iïve named formatted. After that I have to manually copy formatted and save it with that days date as a filename e.g. 2011-02-25 or whatever day is scheduled in the pdf, for use on a mobile device (Nokia N900). I noticed that the date occurs on certain lines in the file so I added a line like:
sed -n 's/^Date: (201[1-9])/([0-1][0-9])/([0-3][0-9]).*/1-2-3/p' < unformatted >theDate
That creates a file theDate with the date in it that I wish to use as the filename for this particular instance. So I would like to skip the file formatted all together and have the sed- script write to a new file using the content of the Date as a filename, but how do I make that happen? And of course it would be more elegant if I could skip the intermediate theDate file as well.
What is the difference between filename and ./filename? Under what circumstances is one preferred to the other?
View 5 Replies View RelatedI need to split a filename into its filename and extension, so I can append a datestamp to the filename. I'm using bash.
View 8 Replies View RelatedI've installed ethernet adapter, it is made in china from a manufacturer called FOX. The driver for that adapter is supported for sco linux kernel version 2.4.x and 2.5.x .However, I'm using Centos5 but the OS didn't recognize the adapter alone, so I'm trying to follo instructions on the driver on the attached CD.
The CD contains file named "SC92031.c", the instructions tell me to do the following "Compile the driver source files and it will generate sc92031.o"
How to make sure that when I save a pdf file, the file extension .pdf appears in the filename? Its a silly little thing, but annoying. The file browser recognises it afterward as a pdf file though, it opens with document viewer ok.
View 9 Replies View RelatedUbuntu 10.04 Guest in VirtualBox
I'm trying to delete a file called
Code:
springlobby_config.h
I've tried:
Code:
rm -i *
which gives me:
Code:
rm: cannot remove `springlobby_config\.h': No such file or directory
Tried to rename it:
Code:
mv * abc
which gives me:
Code:
mv: cannot stat `springlobby_config\.h': No such file or directory
I don't think it's a permissions issue because usually the terminal would say permission denied, but perhaps I'm wrong.
I accidentally deleted my drive, which was an ext4 filesystem. I had lot of .php files in that drive.I created again an ext4 filesystem from that deleted partition. When i used photorec ,it recovered lot of files without the filenames. better recovery tool which recovers both file and the filename?
View 3 Replies View RelatedI get the following error when I try to boot vista thru grub. This is what I did, Got a new Hard drive installed it. Configured the bios to look at the new hard drive first. after installing vista on the new hard drive I switched the boot order and added the lines for vista(last 3 lines) in /boot/grub/grub.conf. I get the following the following error.I have to change the bios everytime i have to boot vista.
error 1: Filename must be either an absolute pathname or blocklist
#boot=/dev/sda
default=0
timeout=15
splashimage=(hd0,1)/boot/grub/splash.xpm.gz
hiddenmenu
title Fedora (2.6.29.6-213.fc11.x86_64)
[Code]...
I have some files and directories (some mixed case, and some all uppercase) that I have copied on a FAT32 USB stick, and when I load this on FC11 all the files and directories that have/are less then 8 characters (ie that fit into the 8.3 format) all go to lowercase.
View 1 Replies View RelatedI wish to know what could be the possible cases for this error:cp: reading `filename': Input/output errorI am getting this message when I am trying to copy a big file of around 50MB.
View 2 Replies View RelatedWhen you open up a file browser, if there are tons of files in some directory, it will be tedious to locate the desired one mannually. For most of the file browsers, the desired file will be located automatically by obtaining the focus when you type the filename. I don't believe that Nautilus doesn't have this feature.So, there must be something I can configure with. Note that I'm just using the default Nautilus with fresh Ubuntu installation.
View 4 Replies View Relatedwhat is the difference between <filename>.rpm and <filename>.src.rpm?
View 2 Replies View RelatedI am working on the script parsing specific message "TEST" from multiple file. The log file name looks like:
N3.2009-11-26-03-05-02.console.log.tar.gz
N4.2009-11-29-00-25-03.console.log.tar.gz
N6.2009-12-01-10-05-02.console.log.tar.gz
I am using the following command:
zgrep -a --text "TEST" * | awk -F"[ .,]" '{sub(".*:","",$6); sub(",.*","",$7); print $1,$6,$7,$10}
and getting
N3 2009-11-25 20:12:57 TEST
N4 2009-11-28 10:42:18 TEST
N6 2009-12-01 10:00:24 TEST
If I only want to search the log file after 2009-11-29, what shall I change the command?
I am in need of a way to check that the same file exists within two different directories using a filename as a variable. Here is the process which requires it: The script is reaches out (via ftp) and pulls down a file(s) and delete it afterwards. This is halfhazard because in the instance it doesnt pull down the file, yet still deletes it, we are up a creek. I am looking to pull it down to a temp location and then verify that file exists in the location in which it needs to be present to process before deleting it, adding a little extra layer for security. The script itself is finished.If I put a file name in manually it works perfect. I just need a way to pump the filename into the variable.
View 1 Replies View RelatedKernel 2.6.21.5, Slackware 12.0
I saved a page from Linuxquestions. It was saved under a filename beginning with '[' (left square bracket). And I now can't delete the file. Unfortunately I cannot send you a screenshot because opening a terminal in the GUI makes ls behave differently. I shall try to describe, assuming the file is in dir '.'. Also let '[SOLVED]foo.html' be the file in question:
Code:
$ ls
<the file is listed>
$ ls [*
/bin/ls: cannot access [*: No such file or directory
$
If I want the hdd to get rid of this file, what should I do? Any hint will be welcome.
How can we convert a dynamic library (filename.so) to a static library (filename.a) using gnu gcc . Can we get a static library form a dynamic library . I saw a few post in which the conversion form a static library to a dynamic library is mentioned but, unfortunately, not the other way.
View 4 Replies View RelatedI tried to format my harddisk (160 GB) with the following command
dd if=/dev/zero of=/dev/sda
After some 3 hours, following error came up:
dd: writing to '/dev/sda' : No space left on device
312581809+0 records in
312581808+0 records out
160041885696 bytes (160 GB) copied, 10708.3 s, 14.9 MB/s
I'm creating a usb device driver that needs to be able to read from two different endpoints. I couldn't see any way of having two read functions in the driver, so I got round this by reading from one of the endpoints with read, and the other with ioctl.However this hasn't worked, the ioctl call from c returns -1. I added a printk command in the driver in the ioctl function, however looking at kern.log I can see that this function is never being called. Does anyone have any ideas as to what the problem called be, or a better method of being able to read from two different endpoints?
View 2 Replies View RelatedI'm reading a text file with fscanf using a loop until feof(inFile). How can I return to the top of the file? As in I have one loop that scans until the eof and then after it there's another loop and I want to start from the beginning of the file again scanning to the end of it. How do I get back there?
View 3 Replies View RelatedI'm having problem with the Samba 3.2.5 file share which host my MS-Word Document the user (user1) already restart her PC but still she cannot open the file from MS Word.
Here's the file and it's status on the samba drive:
Code:
How to reset the Samba file locking mechanism ?
The first line of this struct:
Code:
struct custom_int {
typedef int big_int;
[code]...
GDM don't support theming, but I found tutorial to change it very well also in Lucid when you have users without password. Than you cant see language chooser (keyboard also). As it is possible to add additional applications to GDM (panel or dock - e.g. Cairo), question is next: - What is the command for GDM language chooser (to create launcher in dock, panel, or GDM desktop)?
View 1 Replies View RelatedIn the default install I believe there is an eyedropper color chooser application, found under the graphics menu. What is it's name?
View 2 Replies View Related