Ubuntu :: Foxit Reader Seems To Install In Lucid But Nothing Happens When Run?
May 11, 2010
I recently upgraded from 9.10 to 10.04 (colossal mistake) on my MacBook Pro and lost sound.In my effort to get it back, I ended up trashing the installation, so I formatted and installed Lucid from scratch. When I try to run the foxit that I re-installed from Foxit's website, I get absolutely nothing? I ran through the install using a number of instructions and still get the same result - basically an executable that does nothing.
View 5 Replies
ADVERTISEMENT
Feb 21, 2010
I tried to install foxit reader pro v3 build 150 through wine in opensuse 11.1 but an error message like, could not open file, shows how to install it through wine. I visited wine hq page but could not manage it how to install it.
View 1 Replies
View Related
Oct 18, 2009
Does anybody here use Foxit Reader 1.1 as PDF viewer? I did since it handles PDF ebook with complex layout better than Evince. No need to mention its smaller size and faster speed than Adobe Reader.
However, it seems that recently it's unable to restore the document state when the file was closed. I do not know which part goes run right now but quite sure in the late August it works well. It always jumped to the position when I stopped last time. Now it simply starts from the the first page. :-)
I looked through the Foxit Reader forum and found none similar problems reported. I posted here to see whether it is a Fedora specific problem or generalised one.
View 3 Replies
View Related
May 27, 2010
I'm using Lucid and when I try to install it from the ubuntu software center is says ' this software is available from the 'lucid-partner' source, which you are not currently using'.
View 1 Replies
View Related
Apr 3, 2011
I'm using 10.04 and it's been excellent all the way through up until this problem happened. My laptop's built-in SD card reader has stopped working out of nowhere.
Here are the basic facts:Laptop is a Compaq Presario CQ50-115NR I tried older Linux Kernels, it's not the newest kernel causing the problem. The SD card reader is not shown in disk utility anymore. It used to be shown, even when no SD card was inserted. Now? Nothing.lspci output:
Code:
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation Device 075e (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
[Code]...
View 1 Replies
View Related
May 24, 2010
I just downloaded Foxit and I want to set it as my default PDF reader. However, when I right click, choose Open With-->Other Applications and select Foxit, it just opens the PDF. The next time I open a PDF, it opens in evince again. I also tried System-->Preferences-->Preferred Applications, but there is no PDF option. What else can I try?
Distro: Jaunty 9.10
View 2 Replies
View Related
Sep 25, 2010
I'm looking for alternative to Adobe Acrobat Reader, a slim free PDF Reader with browser plugin, for example for Iceweasel.
View 6 Replies
View Related
Aug 31, 2010
I have openSUSE 11.2, 64 bits. I use Evince from the very beginning. Since a few weeks, when I want to open a .pdf file, Acrobat Reader appears and reads my file. It seems to have become the default reader now. However, I never wanted to change from Evince :this simple program is well enough for me. I tried various ways, but I can't define Evince as my default .pdf reader. How can I make Evince to become my default reader again please ?
View 9 Replies
View Related
Feb 26, 2010
How can I install Adobe's Acrobat Reader?I use thi terminal commandsQuote:sudo apt-get install acroread acroread-pluginsoem@freekbox:~$ sudo apt-get instal informationDonePackage acroread is not available, but is referred to by another package.This may mean that the package is missing, has been obsoleted, orisy available from another sourceE: Package acroread has no installation candidate
View 2 Replies
View Related
Nov 16, 2010
Firefox v 3.6.12 running in Ubuntu 10.10
When a pdf file is accessed I get redirected to Adobe website to download AdbeRdr9.4-1_i486linux_enu.bin (for Linux).
View 6 Replies
View Related
Feb 25, 2011
I don't know how to install this AdbeRdr9.4-1_i486linux_enu.bin on Ubuntu 10.4.I have tried but I don't get it.What must I do to install it because Firefox is crashing a lot and I checked my plugins it said adobe reader is vulnerable
View 2 Replies
View Related
Oct 3, 2010
I'M trying to install a e-book reader called Caliber Ebook managment using the info they have on the HP: wget -O- http://status.calibre-ebook.com/dist/src | tar xvz cd calibre* sudo python setup.py install
And get this message
[sudo] password for zoku:
Sorry, try again.
[sudo] password for zoku:
zoku is not in the sudoers file. This incident will be reported. I have no Idea what the SUdoers are and why i'm not in them.
View 10 Replies
View Related
Oct 6, 2010
I've looked through a few websites looking for a way to install a CAC reader to use with DoD. I would think that Fedora nee Redhat would support this out of the box, but it appears not to be the case.It appears to need pcscd (with possible restarts on login), coolkey, and various other packages, and DoD certs 11 through 26.What is the easiest way to get the CAC working? I know Linux can do it. The Air Force developed a live CD which recognizes the CAC reader by default.
View 2 Replies
View Related
May 3, 2011
I am trying to install the adobe reader in Fedora 14 using yum. When I try this I get a list of packages that also need to be installed. What do I do? I tried to remove avahi-libs-0.6.27-2.fc14.i686, but it wanted to also remove 200+ other things.Needless to say I declined the removal.
View 4 Replies
View Related
Jul 16, 2010
I'm trying to install Adobe Reader 9 on Ubuntu 10. I'd be happiest to apt-get install something, but I'm not picky. I downloaded a file from the web site, but neither I nor Ubuntu knew what to do with it. What is the easiest way to get this done?
View 4 Replies
View Related
Mar 7, 2010
Our company is still using the old Red Hat Linux 9
View 3 Replies
View Related
Aug 10, 2011
I am new to Debian but a long term user of various other Linux distros, most commonly Ubuntu at home and Xubuntu for my old work computer. I tried Debian 6 LXDE the other day on the older PC, from a live LXF disc. It picked up all my hardware automatically and was so stable (more so than the Xubuntu LXDE distro on the HD) that I decided to install it.
Now that it is on the HD it is still very stable, but I am struggling with package management and installing "stuff".
I am fairly comfortable with the CLI and have managed to get myself into the sudoers group, install grub and add the old Xubuntu to grub manually (I was not impressed that Debian didn't pick up the other two distros on the machine, even after a grub install and update grub and all the other tricks I could think of).
Anyway, back to package mngt:
First, why is there no pdf viewer/reader by default? How do you start building if you can't read the many helpful articles in pdf?
But more annoying, when I try to install pdfedit, epdfview, evince, okular, pdf-viewer, osso-pdf-viewer or kpdf (at least one of which MUST work in Debian LXDE) using "apt-get install" or "aptitude install", as root or as sudo in the Terminal, why do I get "Couldn't find any package whose name or description matched" "Couldn't find package" or "Unable to locate package"? I can't even install synaptic to help!
Then I found that my sources.lst only listed the install CD as a repository (how stupid is that?) so added some repositories to it (eg deb http://http.us.debian.org/debian stable main contrib non-free) and did a sudo apt-get update. And apt STILL can't find anything.
And what is that Debian Installer in the >Menu>System Tools? It asks for a password then nothing opens that I can detect. Is there a GUI for package mngt?
View 1 Replies
View Related
Sep 23, 2010
Howto install Acrobat Reader 9 on Lenny?
View 5 Replies
View Related
Jun 17, 2010
I'm trying to install DNL Reader , which is a Windows file. I have had no luck in getting it to install.
I'm running Karmic Koala.
And not sure how capable I am with using Wine either (I haven't been able to add any appications to run on Wine. I can go to the configure Wine window, add the program and then what?
Does DNL Reader exist for linux or some simple workaround for reading password protected e-books with .dnl extensions?
Also, I did look at the other post here on DNL readers here and the directions there didn't help...
Update:
I tried installing it in terminal with the command:
wine /location/filename.exe and I got
fixme:CoInitializeSecurity ((nil),-1,(nil),(nil),0,3,(nil),0,(nil)) - stub!
fixme:shdocvwersistStorage_InitNew (0x131640)->(0x8ee82c)
fixme:urlmon:URLMoniker_BindToObject use running object table
fixme:shdocvw:BindStatusCallback_OnProgress status code 1
fixme:shdocvw:BindStatusCallback_OnProgress status code 2
[Code].....
View 2 Replies
View Related
Jun 6, 2010
I'm sure there is an easy solution for this but I can't figure it out. Just recently installed F13 and I'm trying to load Java and Adobe Reader, but I can't get installer to come up. I have tried both Firefox and Chrome to download it. I have tried to install by command line, but no luck.
View 1 Replies
View Related
Jun 2, 2010
I have an old laptop that I want to install Lucid Lynx on from a flash drive but when i try to do so all I get is a blank screen after I select the language and the option to install.
Intel Celeron M 1389 MHz
2 GB RAM
120 GB HDD
Intel i855GM chipset
View 4 Replies
View Related
Jul 27, 2010
I'm running an AMD 64 system with 4 gigs of ram, and only have 32 bit windows. Since the update to Lucid I have yet to have it work properly. Every time I've tried to install it it ether over wrights my boot file, and I lose windows (a few programs I have to have in there)when I try a standard install or it fails to boot when I do the Wubi install. Is there any where I can re download the previous 46 bit version? I seam to have lost the ISO.
View 3 Replies
View Related
May 1, 2010
so i just did a fresh install of lucid last night. it went relatively well, but there's a few minor issues.. one of them being that i can't install certain software from ubuntu software center because it tells me that the program isn't offered for amd64.
for example, when i try to install skype, it tells me
Quote:
Sorry, 'skype' is not available for this type of computer (amd64).
i even downloaded the 64 bit skype from the website, but when it doesn't want to install that either and just leaves me with a broken package.
the thing is, these programs that won't install with lucid worked perfectly with karmic.. so i guess it has something to do with lucid..
View 4 Replies
View Related
May 3, 2010
Anyone know if it's possible to install FreeNX in Lucid.
I've tried but get an error.
These are the steps I followed code...
Is there anyway to get this installed? Do I need to wait for FreeNX to be updated for Lucid or something? Or does anyone have any suggestion for a RDP server and client? I don't want to use VNC it's too laggy.
View 9 Replies
View Related
May 7, 2010
In case anybody is battling to install Kexi database front end in Lucid Lynx, you have to first enable kubuntu ppa beta repository. Enter the following in terminal:
sudo add-apt-repository ppa:kubuntu-ppa/beta
sudo aptitude update
sudo aptitude install kexi
View 2 Replies
View Related
May 14, 2010
I don't know exactly why the Ubuntu developers keep the Evolution version to 2.28 instead of version 2.30 like the rest of Gnome in 10.04. But here is how to upgrade evolution to version 2.30. I think this version is way more stable than the previous version 2.28. And more important to me, the evolution-mapi plugin is way more stable.
Here is the howto:
[URL]
View 3 Replies
View Related
May 19, 2010
I don't know how to install programs from the net on here >.< this is driving me up the wall. Just about any program I download doesnt have an install option.
View 9 Replies
View Related
Aug 5, 2010
Running Lucid, if I want to do some work with PHP, do I need to install it first or is it already there? (If it is there, I can't find it.) If I do need to install, how exactly do I do that? I did a search for PHP in Synaptic, but I had no idea what exactly I should be installing.
View 9 Replies
View Related
Aug 15, 2010
Trying to install icepodder on Lucid 64-bit, I don't have any "architecture" problems of any kind. Running icepodder from a terminal, I do get the splash-screen for a short time, then the following output:
[Code]....
View 1 Replies
View Related
May 26, 2011
trying to install a more recent version of QtiPlot in lucid (10.04)? I need an update of QtiPlot because the one available on lucid by default (0.9.8.2) is unable to open some origin files I have, and the newer version are (I've tested under a virtual machine with Natty installed).
View 7 Replies
View Related
