Ubuntu :: Fonts Not Rendering Properly In KDE Applications
Jan 25, 2010
I've seen a few people are having this issue, so i wanted to start a main thread. My problem started... After installing qt4-designer onto my Ubuntu 9.10 Gnome OS, the fonts in certain applications looked distorted like enlarged bitmaps. I tried uninstalling designer, reinstalling components, using qt4-config to restore fonts, but nothing has fixed this issue.
The issue seems to be specific to KDE applications such as: qt4-config, Amarok v2.2.0, skype, akonaditray, ktorrent, etc. Also, in qt4-config it seems to be specific to fonts between the sizes 9 to 12 inclusive for all font faces. All other font sizes seem to be okay. I've attached some examples.
When i first tried to install qt4-designer, it indicated the following dependancies: fontconfig-config libfontconfig1 libfontconfig1-dev When i try to remove fontconfig-config, it indicates that it is dependent on nearly every application in my system (including drivers and xscreen). Hence, I would need to uninstall everything and reinstall everything!?
View 2 Replies
ADVERTISEMENT
Jul 9, 2009
I'm trying to achieve in Ubuntu the same fonts rendering like in openSUSE, which has the best configuration. [ubuntu] Font rendering on some websites.. - Ubuntu Forums. Also Fedora has the same problem like Ubuntu. Fonts are too wide and big, but only on some websites. How to reconfigure fonts to have proper size?
View 9 Replies
View Related
Mar 20, 2011
I have been noticing that openSUSE and many other Linux distributions are not rendering fonts as the way they should be. The fonts are rather fuzzy. I wish it was lot a crispier as like in Windows or Mac. Is there any solution to that?
View 8 Replies
View Related
Jan 9, 2010
Hi! I configured subpixel rendering in GTK and it works, but it seems there is a difference in font appearance in GTK and Qt applications.
The fonts in GTK seem thinner, more sharp and aliased while in Qt they are more fat and smooth. This is with the same font name and size.
I also found that the same behavior appears in Fedora, but in Ubuntu all fonts appear similar in both GTK and Qt (fat and smooth as in Qt in SUSE).
So my question is how to make GTK fonts to appear as in Ubuntu.
View 2 Replies
View Related
Jun 10, 2011
I guess this is a part deux, since I already posted one rendering issue which was eventually resolved ... having to do with the themes of this Debian Forum. Well, I don't know if this is related to that, but yesterday I noticed on another site that my Iceweasel 4.01 is not displaying portions of pages properly. See attached images. Both Chrome & Opera display that page correctly, I've included a screenshot of the same page with Chrome. I have JAVA installed and everything works perfectly fine accross the board on all browsers, except for this "once in a while" issue with Iceweasel. I've noticed this "missing content oddity" on three sites so far (out of 50 or more). No problem with eBay, craigslist, paypal, and other major players.
Open the images with a new tab, then compare both images side by side for best results.
Iceweasel: [url]
Chrome: [url]
View 14 Replies
View Related
May 26, 2011
I just preupgraded from Fedora 14 to 15 on my Toshiba NB205 netbook (the preupgrade went smoothly by the way).
Immediately upon logging in, I discovered catastrophically poor quality of font rendering in every terminal window program I tried, (and I checked plenty like LilyTerm, Sakura, gnome-terminal, etc) and in web-browsers.
The symptoms are the same for all applications: the glyphs are very thin, anorectic, and very ugly.
The described behavior is desktop independent: same in Gnome (3 and the fallback mode), fluxbox, Openbox.
View 14 Replies
View Related
May 8, 2010
Ever since installing 10.04 my fonts won't work. I've installed MS True Type every possible way I can and they still won't work.
After installing they seem fine in all applications, except on the internet. Both FF and Chrome can't seem to read (MSTT) fonts, at all. Every website I open fonts are displayed the same as before I install MS True Type.
View 1 Replies
View Related
May 4, 2011
I just installed Ubuntu 11.04 with unity. Occasionally I will have text in firefox that doesn't render properly. It will have horizontal lines through it. I have attached an example of the problem I am having.
Is this a bug in 11.04?
View 6 Replies
View Related
May 23, 2011
It doesn't seem to be a particular font
View 9 Replies
View Related
Oct 10, 2010
So far, as a former Chrome user on Windows, I am enjoying Chromium. However, there is one glaring problem that is bugging me, and is disrupting my usage of the browser.
Chromium will not show Japanese fonts properly. It's not that everything shows up as boxes. The problem is that certain characters will show in Japanese, and certain will show in Korean, thereby making the Japanese text unreadable. Copying and pasting into gedit allows me to read the Japanese text, and Firefox never had this problem, however, within Chromium, this is unreadable.
Here is a picture to show you what I mean:
Has anyone else had this problem, and fixed it? I have installed the language packs and have tried setting things to different unicode fonts and changing the encoding to unicode and even Japanese, and continue to get these errors.
View 4 Replies
View Related
Apr 10, 2010
I have problem with Farsi fonts on the ubuntu. The Mozilla Firefox cannot show the Farsi website properly. I have already installed all Farsi fonts available Synaptic Package Manager. Anybody know hoe to solve the problem.
View 3 Replies
View Related
Jan 31, 2010
I ran a program under WINE and when it terminated, suddenly lots of programs were running with tiny fonts, including Google Chrome, Unison, and PLT Scheme. I think what these programs have in common is they all use GTK. I am running Debian Linux without a Gnome desktop. As suggested on the web, I put this text in ~/.gtkrc-2.0:
style "user-font"
{
font_name="BitStreamVeraSans 14"
}
widget_class "*" style "user-font"
gtk-font-name="BitStreamVeraSans 14"
Unfortunately this change has had no discernible effect.
How can I escape the land of tiny-fonted ones?
View 1 Replies
View Related
May 29, 2010
I'm having difficulty enabling X11 bitmap fonts for GTK apps in F13. From all I've read on this forum and elsewhere on the Internet, this normally just requires symlinking 70-yes-bitmaps.conf into /etc/fonts/conf.d, but I can't get this to work properly.
X11 bitmap fonts are available to X11. I have them working in xterms, but no GTK applications.
What I've tried so far:
- Symlinked /etc/fonts/conf.avail/70-yes-bitmaps.conf to /etc/fonts/conf.d
Manually added font path to xorg.conf to force it to be picked up:
Code:
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
EndSection
/usr/share/X11/fonts/misc is symlinked in /etc/X11/fontpath.d
[Code]....
View 2 Replies
View Related
Jun 24, 2011
I have installed Netbeans IDE on my Netbook and on my PC (openSUSE 11.4 32 bit and openSUSE 11.4 64 bit). On both has the UI a ugly font. I don't really know how to change it. I already searched the web but I couldn't find anything related. Have a look how it looks like:
Uploaded with ImageShack.us. And then the "original": [URL]. OK, this picture is already 3 years old but I don't think that Oracle would change Netbeans UI font to look creepy. How I can change it to normal?
View 7 Replies
View Related
Mar 7, 2010
I downloaded an FLV video and placed an extra MP3 file over it. Two files. Total: 30 MBI experimented with about seven rendering containers, and QuickTime renderer was the only rendering container that didn't result in sped-up/compressed video or correct rendering for just fifteen seconds.How in the name of all that is holy did this rendering end up with 570 extra MB?
View 2 Replies
View Related
Apr 4, 2010
I try to run Mesa gears example and I get following error: Code: freeglut (./gears): Unable to create direct context rendering for window 'Gears'
This may hurt performance. though the application runs successfully, but I guess that in future I will have much problems with productivity.
I run Linux CentOS 5 on WMvare 7. Mesa's version is 6.5
Relevant output of lspci -v gives: Code...
View 1 Replies
View Related
Jan 8, 2010
I use XFCE on Debian (squeeze) and I'm sick and tired of the ugly fonts in all Qt-apps. See below what it looks like in qtconfig-qt4 with a deleted ~/.config/Trolltech.conf. I've done some googling, but without any satisfaction. I've tried to change font (Font family drop down menu in pic), and some fonts looks as bad as the default (Sans Serif), and some look ok. Something seems to be fscked up.
View 7 Replies
View Related
Feb 5, 2010
I just did a reinstall because I migrated to a new box, and I can't figure out what it was I did to fix the ugly ugly fonts Java apps display. I've switched to jre from openjdk, which was a minor improvement, however I recall seeing much better fonts in my java apps about an hour ago before I switched systems.
View 4 Replies
View Related
Apr 27, 2010
I'm using Fedora 13beta and KDE on x86_64 arch.
gtk 32-bit apps (eg: acroread, skype) have ugly fonts in their menus.
gtk 64-bit apps look great (and similar to qt apps).
The following packages are already installed:
gtk2-2.20.0-1.fc13.i686
gtk2-engines-2.20.0-1.fc13.i686
qtcurve-gtk2-1.3.0-1.fc13.i686
View 4 Replies
View Related
Feb 23, 2010
How do I install apps? I was following the instructions, but regardless of the app, the install button was shaded. I tried 5 completely unrelated apps wish no success. I'm running 9.10.
View 9 Replies
View Related
Jan 25, 2010
I assume that this would be the correct place to put this, because codelite isapplication that you have to download via the Ubuntu Software center to get. But anyhow...I have been playing around with codelite for a little while nowand I wanted to use it for the purpose of learning how to script and write programs in Lua programming languageAccording to the program description it comes with the Lua support built in, but running it proves to me that it is solely a C++ application.
This isn't an extreme problem, though, I've read that Lua is supposed to be programmed through C++ anyhow. I am having only one problem that needs the attention. I ran through the code and got an error telling me that it could not find the #include files for Lua. A quick check of the /usr/include/ files showed me that there werendeed none in there.That being said, I went to the Lua website and downloaded the source and binaries *.tar.gz file, extracted it to a folder called "Lua." I am unable to move the #include files from inside its include folder to the main one on /usr/include/.
I have a feeling it is an administrator problem and that I need something involving the terminal or sudo to reach there. I have read around online, and they almost all say the same thing, telling me to navigate to the folder and "run make." I know what this is and how to do it, but it says that it cannot find the Makefile, which I have seen and know is in the folder, so it doesn't.Moving to the src folder within the Lua folder shows me that there is another Makefile, meaning that I have a second chance to make the files. I navigate to it, and then what do you know? Make works. Until the end, where I get a lot of errors and a termination of the process. Errors include Error 1 and Error 2, which I do not know what they are
View 3 Replies
View Related
Apr 3, 2010
I recently downloaded Frets On Fire and the HRP Polymer pack for Duke3D...Duke3D runs fine with just EDuke32 and no mods, just Duke3D and EDuke32. But when I try the HRP Polymer pack, it says in Terminal "NVIDIA: Direct Rendering failed, attempting indirect rendering." This is fine...if I want the game to lag like hell, I'm sure my video card and the driver for it support DR, the video card is a NVIDIA Geforce FX 5200, the same message appears in terminal when I run Frets On Fire, I think it does with other games too, if someone could explain how to enable Direct Rendering.
View 5 Replies
View Related
Aug 8, 2015
I have Apache setup on localhost with a wiki, ethercalc, etherpad and kanboard.
Wiki is on port 80, in /var/www/html so when someone enters domain into browser it comes up, which is what I want. It comes up lightning fast.
Problem is how to properly direct to other ports i.e. 8000, 8002 and 9001 for other applications. All others are in /usr/share.
I tried creating directories with .htaccess for each in /var/www/html, but if they even come up (kanboard completely unreachable) they are super slow, drop connection and usually don't render completely.
I've read that if you have access to Apache configuration .htaccess is wrong way to go and for security reasons app files shouldn't be directly located in /var/www/html?
View 7 Replies
View Related
May 29, 2010
Ubuntu 10.01 Lucid I had a few problems with applications failing to install properly with Synaptic Package Manager which resulted in a slew of launchers in my Applications > Other folder which all delivered error messages. These all had some kind of grey screen icon. I deleted them after uninstalling the applications which failed to install (wine 1.2, wine-gecko 1.2, then later wine 1.0, Wine-gecko 1.0, and winetricks.) I didn't notice that some non-wine applications also were given the grey-screen icon, and accidentally deleted "Archive Mounter." I know that I only deleted the launcher not the application, but don't know how to re-create the launcher in the Applications menu. Would someone...
1 - Right-click on the Applications panel,
2 - Select Edit Menus
3 - Find "Archive Mounter" (probably in "Other" folder)
4 - Select Properties for the launcher, look at the Properties sheet and tell me what the Archive Mounter command is, so I can re-create the launcher manually? And if you could, the path to the icon too
View 7 Replies
View Related
Jun 17, 2010
I've been looking though different editors for one that has good printing support. Ideally it should be able to print C++ code with line numbers, syntax highlighting, multiple columns per page, customizable fonts and sizes and a print preview feature so that I can make sure it looks right before sending it to the printer. It appears that notepad++ had at least some of these features, but it is not available on linux. The best I could do so far is to copy/paste the output of 'cat -n foo.cpp' into oowriter and format it into two colums. I don't get synax highlighting though and I have to manually replace tabs with a few spaces as well as some excessive leading spaces before the line numbering.
View 1 Replies
View Related
Jan 15, 2010
I just finished installing a bunch of truetype fonts. After installing them, firefox is displaying "bradybunch" font when I search google.
The font settings are all serif and sans serif in both the system fonts settings and firefox settings.
I am using ubuntu 9.10.
Any idea why this could be happening?
View 1 Replies
View Related
Oct 14, 2010
I would like to use the Adobe Garamond Pro in my text doccument in open office writer. I got a text document where from a friend where it is used so I know that it can. But when I want to edit I cant find it in the fonts dropdown menu.
View 2 Replies
View Related
Jul 3, 2011
I have a folder with over 1500 fonts, I would like to move them to my /usr/share/fonts folder so that they can be used. Some are from Windows, some are just random extras. I've installed the msttcorefonts, but there are quite a few missing that make some wen pages look different.
How can I go about putting the fonts from my folder, into the appropriate /usr/share/fonts folder to be used? And how can I move them all? I can't drag and drop them, and mv FONT_NAME /usr/share/fonts for all of them will take a month or two. Is there a way to elevate my self to be able to just drag and drop them all? And which folder would they need to go into for them to be used in Chrome and Firefox?
View 5 Replies
View Related
Oct 5, 2010
attempting to install VLC I get the following errors;
Error in file "/usr/share/applications/kde4/kfontview.desktop": "fonts/package" is an invalid MIME type ("fonts" is an unregistered media type)
Warning in file "/usr/share/applications/gnome-nautilus-folder-handler.desktop": usage of MIME type "x-directory/gnome-default-handler" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent)
Warning in file "/usr/share/applications/gnome-nautilus-folder-handler.desktop": usage of MIME type "x-directory/normal" is discouraged ("x-directory" is an old media type that should be replaced with a modern equivalent)
Thoughts or suggestions on how to fix this. I running Fedora 13 and I used 'yum install vlc' to install the app.
View 7 Replies
View Related
Feb 23, 2010
I have just installed openSUSE 11.2 X86_64 on my laptop, I then used KDE to install lots of type 1 fonts for my printer. These get loaded to /usr/local/share/fonts/...These installed fonts are visible to KDE (KWRITE) and GIMP so I assume that the installation was O.K. When I start openOFFICE writer I do not see these fonts. The font selection appears to be the fonts located under /usr/share/fonts. I have not tried other ooo3 components. I assume that they are not going to see the fonts either.
I have searched google and it appears that /usr/local/share/fonts is the correct location for non-packaged fonts. Has anybody any idea what is wrong? I think I could move all the fonts to /usr/share/fonts and ooo3 would work but this seems to break the installation directory structure. I have considered symlinks but I don't like the idea of defining a font twice to Linux and creating the syslinks is more work than reinstalling the fonts if they are lost
View 7 Replies
View Related
