Ubuntu :: Email Synchronization With Hotmail?
Mar 15, 2010I use Thunderbird in MS Windows and it synchronises with Hotmail.
The standard Ununtu mail programme does not appear to do so.
Have tried without success to download Linux Thunderbird.
ADVERTISEMENT
Ubuntu :: Setting Up The Email Client To Work With Hotmail?
Feb 16, 2010I have recently installed Ubuntu 9.10 on laptop behind XP and Win7. No problems at all so far. Even got wireless to work (awesomeness). But trying to set up the email program it continues to say there's a problem. I'm trying to use Hotmail. And the way the email wizard? is set up it's a little off for me. I'm not too experienced with Ubuntu, or Linux for that matter. Mainly a Microsoft OS user. give me the info on setting up the email client to work with Hotmail?
View 4 Replies View RelatedServer :: Sending Email To Hotmail With Fedora?
Mar 8, 2010How to configure my home linux server, as an email server, and be able to send email to hotmail, please?. I have done this before, but I never managed to do it so hotmail accept emails coming from my linux server.
View 5 Replies View RelatedGeneral :: Using Hotmail Type In The Email Address But The Curser Will Not Appear?
Jun 15, 2010when usihg hot mail i can type in the e mail address but the curser will not appear in the reply section After switching from Google to Yahoo the problem was solved.
View 2 Replies View RelatedUbuntu :: Evolution Downloads Same Email Message Multiple Times From Hotmail / Fix It?
Feb 28, 2011Evolution downloads the same email message multiple times from Hotmail
How can I fix this?
OpenSUSE Network :: Email Treated As Junk Mail On Hotmail, Gmail, Yahoo
Dec 31, 2009I have been trying to figure out how to keep my company's email from being treated as junk mail by Hotmail, Yahoo & Gmail for over a year.
When I acquired the company its email was hosted by sina.com as its in China. It was being run under a windows server and had issues sending & receiving.
I moved it to a linux server system in Hong Kong that has a US co-host site in Chicago area thinking its got to better than whats running in China.
We are still having problems sending emails to hotmail, yahoo and gmail.
My entire company is about ready to redmond our company email and use their personal webmail accounts.
Software :: Sync With A Free Hotmail Account - Delete An Email Within The Client It Remains On The Server
Mar 5, 2010Have anyone used an email client that stays in sync with a free Hotmail account? I have setup Claws Mail but when I delete an email within the client it remains on the server. I remember this being the same for other email clients. Is there any client that will stay in sync? If I delete an email from within the client it will also be deleted from Hotmail's web bases interface.
View 4 Replies View RelatedUbuntu Servers :: Setting Up Synchronization With Samba?
Jul 14, 2010I have two 1TB hard drives, one in my Linux server (running Debian, but I thought I'd ask here anyway) and one in my Windows desktop.
What I would like is a file synchronization program that will automatically (or scheduled via cron) synchronize my hard drive on Linux with my hard drive on Windows via Samba.
Ubuntu Security :: Best Encryption / Backup And Synchronization Scheme
Jun 7, 2010I would like a seamless way of having personal files encrypted (at this point I am only worried about the home directory) and synchronize these files between different computers and with an external hd.
So far my partial solution is:
1) Default Ubuntu eCryptfs solution;
2) Unison to synchronize between the upper layers of both computers via ssh (operating on the /home/$USER mounted by ecryptfs) and also between one computer and the external HD;
3) Don't know about the external hd.
Reasons:
- I don't want any pain about data loss or data leak if my hardware gets stolen;
- Data in /tmp, /var and swap are not that important for me right now;
- It is very important to synchronize fast, incrementally and properly: propagating deletions rather than reverting and detecting change-change/change-delete conflicts before miss-propagating changes, which as far as I know only Unison is good at;
- Even if I could set the same passphrase on both computers (I guess I can, but Ubuntu does not offer me to choose the ecryptfs passphrase) I want to see the true filenames that are being synchronized;
- If possible I would like to simplify the whole scheme so that each computer is doing its own job seamlessly, and operating on the upper decrypted layer looks simple and robust;
- I would like a more general and easy-to-use scheme for the external device, so other folks use it too;
- If possible I would like ext4 backups, so it remembers file permissions etc... however it would be nice to be able to open it from Windows.
Are (1) and (2) above really good solutions or am I missing something? What are the best solutions for (3)? So far I have seen cryptsetup/palimpset and truecrypt. The more native and floss the better, but being crossplatform is nice. What are the pros and cons, and what's their relation to FreeOTFE and other Windows tools?
General :: How To Measure Synchronization Performance
Jul 9, 2010I'm looking for a tool for Debian Linux that can measure the synchronisation performance between two desktops.
I'm using RADClock instead of the NTP client to synchronise my desktops.
Fedora :: Synchronization Thunderbird And Nokia (N97) Smartphone?
Nov 15, 2009I 've searched for on a lot of threads and google results, I found no response. Does someone know a solution to synchronize calendar and contacts between a smartphone nokia ( particularly N97 one) and thunderbird with lightning or sunderbird plugins on fedora ( release 11 for me) please?
View 2 Replies View RelatedFedora :: KVM-QEMU With Libvirt Clipboard Synchronization?
Dec 18, 2009I'm running a Windows 7 guest using Virtual Machine Manager to launch my "console" to the VM. I believe it uses VNC to connect to the console. I'd like to have clipboard synchronization so I can copy from the host and paste to the guest.
View 1 Replies View RelatedCentOS 5 :: Error - No Suitable Server For Synchronization
Jan 22, 2010I have started ntpd service with chkconfig ntpd on .When i execute : ntpdate 0.pool.ntp.org , then i get error :
No suitable server for synchronization .
Software :: Cell Phone Synchronization On Linux?
Dec 31, 2010My phone is dead or dying so now is a good time to look for a FOSS replacement for Nokia PC Suite and Outlook -- the only reason I run Windows.
Is there any solution (or combination of solutions) that supports synchronising personal information manager (PIM) data -- most importantly names and phone numbers, calendar/schedule and notes -- with any model of cell phone?
EDIT:
SyncEvolution looks promising and there are reports of it working at least adequately with several phones including the interesting for Linux people Nokia N900 but OS-wise it only claims compatibility with ubuntus and debian 4.0, not beloved Slackware; maybe that's more because of what people have tried than because it doesn't work. As the name suggests it works only with Evolution, perhaps not the first choice of email client and PIM.
Software :: NTP - No Server Suitable For Synchronization Found?
May 18, 2010i had tried several restrict options and disabling the slackware "no serve to anyone" default. i want the slackware system to host the ntp server for other devices to sync with so im not so hard on the remote ntp servers.
Code:
# Sample /etc/ntp.conf: Configuration file for ntpd.
#
[code]....
Software :: - New Storage - Synchronization / Mirroring Tool
Apr 18, 2011We have a Linux system serving as a storage. As it is running out of free space be bought a new server which should replace the old one. We would like the outage during the migration to be as short as possible. The plan is as follows (actually very similar to XEN live migration):
1. Copy the data to the new storage
2. Stop access to the old storage
3. Synchronization of data
4. Set the new storage as the primary one.
I was thinking of rsync, but the first phase (building file list) takes extremely long, because there are millions of files. Is there any other tool which whould be more suitable for it?
Programming :: Synchronization Of Two Processes With Share Memory?
Feb 27, 2011I have two processes that share a piece of memory, and i want to use the shared memory to send data from one process to the other. it's like a simple consumer-producer problem. when the producer fills the shared memory, it waits until the consumer can consume some data in the memory; the consumer needs to wait if there is no data in the memory. The thing gets complicated when both threads are allowed to sleep and wait for the other to wake it up.
i wanted to use condition variable of pthread for synchronization, but it doesn't work in multiple processes. i tried semaphore, but it's quite complicated and i still cannot make it right. I believe it's a common problem and someone should have written similar code before, or maybe the code is even wrapped in a library, but when I search for it on Internet, I only found information about how to share memory between processes. Does anyone know where I can find this kind of code or library?
Slackware :: 13.0 / 13.1 NTPD Differences (Synchronization Confirmation)
Jun 28, 2010I'd like to get the 13.0 "synchronized to <time server>, stratum <stratum>" messages back on 13.1.
- On 13.0, running ntpd 4.2.4p8, reassuring messages appeared in /var/log/messages like "synchronized to 211.233.84.186, stratum 2".
- On 13.1, running ntpd 4.2.6p1, there are no messages in /var/log/messages to confirm that time is being synchronised.
rc.ntpd on both starts ntpd with the same options. /etc/ntp.conf is identical on both, a "get it working and then make it secure" version:
Code:
cat /etc/ntp.conf | grep -E -v '^$|^#' cat /etc/ntp.conf | grep -E -v '^$|^#'
server in.pool.ntp.org
server asia.pool.ntp.org
server 127.127.1.0
fudge 127.127.1.0 stratum 10
driftfile /etc/ntp/drift
According to Linux Home Networking, synchronization can be checked using ntpq -p. This shows synchronization is working. I would prefer to see that confirmation in /var/log/messages without having to run a command manually to check it. How to get the old messages back?
CentOS 5 :: Dropping Synchronization Back To Localhost?
Jun 1, 2011I'm having difficulties with ntpd on my CentOS 5.6 install.
It all starts well; the server connects and synchronizes with a couple of public ntp servers:
[root@toro ~]# ntpq -p
remote refid st t when poll reach delay offset jitter
==============================================================================
+ntp.networking4 193.67.79.202 2 u 1 64 377 35.652 47.102 12.349
*deepthought.doc 131.188.3.223 2 u 2 64 377 29.010 44.358 11.585
[Code]....
OpenSUSE :: Any Good Bi-Directional Synchronization Tool (like Unison)?
Oct 25, 2010I need a good bi-directional sync. tool like unison, that would work properly over ssh and allow manual decisions and merging if both sides (local&remote) contain changes. unison meets most of my needs, the only drawback is the compatibility - it needs to be installed on both sides, and with the same version. Nowadays it's a bit of a problem, if you have say OS11.3 on one node, SL3 on the other and a MacOS on the third. In my view one only needs the ssh connection, all the rest of the file analysis should be done by the local software. Anyone knows such a tool?
View 3 Replies View RelatedNetworking :: Agent And Client Synchronization To Run Netperf Tool
Mar 14, 2011I work on Linux Regression testing and I am writing a script to automate(shell scripting) the netperf tool when I need to determine the performance(throughput) of agent and client(individually) and I shall be running a shell script on (lets say) client first. But how to obtain the synchronization between them both as I need to execute a command even in board(agent) side to get the script going.
View 1 Replies View RelatedNetworking :: NTPD - No Server Suitable For Synchronization Found
Mar 29, 2011I am having a situation with an NTPD server.
Code:
remote refid st t when poll reach delay offset jitter
plesk2.datacent .INIT. 16 u - 64 0 0.000 0.000 0.000
91.198.87.118.b .INIT. 16 u - 64 0 0.000 0.000 0.000
core.fr.zeroloo .INIT. 16 u - 64 0 0.000 0.000 0.000
178-26-105-100- .INIT. 16 u - 64 0 0.000 0.000 0.000
and it remains so no matter how long I wait...
Hoping to get better results with ntpdate, I stopped NTPS and tried :
Code:
# ntpdate ntp.skynet.be
29 Mar 09:12:26 ntpdate[4715]: no server suitable for synchronization found
# ntpdate -ud ntp.skynet.be
29 Mar 09:14:02 ntpdate[4814]: ntpdate 4.2.4p4@1.1520-o Sun Nov 22 16:14:35 UTC 2009 (1)
transmit(195.13.23.5)
receive(195.13.23.5) .....
I am running Debian Lenny 64b, and every packages are totally updated. I have 25 identical servers. And there is just one giving me this problem. From what I see, it is not a connection/FW issue since ntpdate get replies from the ntp server (ntp.skynet.be is my isp's stratum 2 ntp server).
Software :: Palm Pilot Synchronization To The KDE Databases For Kontact ?
Dec 14, 2010I've been running Kubuntu (up to 10.10 now) and also OpenSuSE. I have a Palm Pilot that I want to synchronize to the KDE databases for kontact, kaddressbook, korganizer, etc. Until my upgrade to KDE 4.5.4 I was able to use kpilot, but kpilot is no longer being maintained and has been dropped altogether from KDE 4.5.4. So I've been stranded. It seems that both kpilot and jpilot are quite ancient, not having been materially updated for ten years.
One suggestion I've heard is to replace my Palm with an iPhone, but that's not a path I want to take. The iPhone has capabilities (telephony for one) that I don't need but would be paying dearly for. Not only is the iPhone far more expensive than the Palm; it entails that horrendous and extortionate two-year contract with AT&T.
How I can sync my Palm to the KDE databases? One possibility is some combination of akonadi and OpenSync, but there doesn't seem to be support for that yet, let alone a clear explanation as to how to get that combination to work.
Programming :: Synchronization Between Threads Fails - Resource Unavailable
May 6, 2009I am working with a C++ program consisting of two threads. The first threads receives packets through an UDP unicast connection and stores them in a buffer. The second thread reads the packets from the buffer and sends them through an UDP multicast connection. Both use blocking sockets and share a common buffer and a linked list L1, which are protected by mutexes. The program seemed to work just fine, receiving a packet and sending it almost immediately, but started giving some trouble recently. The synchronization between both thread started failing, and I decided to use a non-blocking socket in the sending thread. As a consequence, sendto() doesn't work in some cases, causing an errno 11 (Resource unavailable).
[Code] ...
Ubuntu Networking :: Ntpdate Domain.local (no Server Suitable For Synchronization Found)
Nov 2, 2010I can't update my ubuntu clock with my server. If i run the command ntpdate domain.local, it gives me this erro (no server suitable for synchronization found) if i run the command nslookup domain.local it works well and found my server
View 3 Replies View RelatedUbuntu :: Using Hotmail In Evolution?
Jan 3, 2010I want to access my hotmail account through evolution. i've set the pop info and all that, but whenever i try to send/receive, it says error fetching mail.
View 1 Replies View RelatedUbuntu :: Evolution Email - Intersperse Replies Into Quoted Email?
Apr 24, 2010I use 'quoted' style for reply emails. I want to be able to intersperse my replies within a quoted reply i.e. if the email had three paragraphs, I'd like to be able to have my replies between each of the paragraphs. At the moment, I don't seem to be able to do anything other than delete from the quoted section - I try to simulate my requirements by cutting and then 'paste quotation', but this doesn't always work as sometimes Evolution adds too many levels of '> ' .
View 5 Replies View RelatedUbuntu :: Use An Email Client Like Alpine To Read Imported Email?
Feb 24, 2011we had a server with Hostway, and it was running ubuntu. The server also had Plesk installed, which did some funny things. We had several websites on that server, and many email addresses. Then we changed servers. Now we have a server through Rackspace and it is also running Ubuntu. It also has Virtualmin installed, which generally does not impose as many unconventional changes on Ubuntu as Plesk did.
Rather than using Thunderbird to download my email (which is what I used to do) I've decided I'll start reading my email on the server. So I will ssh to the server and then use some email client, such as Alpine, to read the email. So I installed Alpine. I have an email account for "lawrence". The email address is lawrence @ krubner. Currently, when mail arrives for that account, it is stored here:
/home/krubner/homes/lawrence/Maildir/new
and then it is transferred to hear:
/home/krubner/homes/lawrence/Maildir/cur
When I start Alpine, while logged in as lawrence, Alpine automatically sets up an inbox for me here:
/home/lawrence/mail/
How do I get Alpine (or any other client) to read from the correct folder? I'm fairly sure the email package (the MTA) at work on this new server is Postfix. As near as I can tell, my email is held for 24 hours in this folder:
/home/krubner/homes/lawrence/Maildir/new
and then it gets transferred here:
/home/krubner/homes/lawrence/Maildir/cur
Alpine only lets me set one path for my Inbox, so I'm not sure what path I should set. If I use "cur" I will see all email 1 day late, but if I use "new" then I will miss email if I go a day without checking.
Software :: CentOS 5.3 VM With Ntpd, No Server Suitable For Synchronization Found?
Jan 8, 2010I cant get ntpd to synchronize with the ntp servers. I have a CentOS 5.3 32 bit Virtual Machine. I'm in USA on Pacific Standard Time. Here's all configuration and other important information for troubleshooting. Is there anything wrong with my config? btw, I used wireshark to look at the UDP packets - I dont get any responses from any of the servers back. I only see requests going out from my server, but no response. Is this a firewall Issue? If it is, then do I need to just enable UDP port 123 on the firewall?
[Code]...
Software :: Groupware Calendar Synchronization: Thunderbird <-> Kontact Incompatibility?
Mar 23, 2011find a groupware solution that statifies KDE/Kontact and Thunderbird/Lightning users equally, I have stumbled upon a problem that appears to be Client related. While using Citadel, Thunderbird would sync its calendar using SyncKolab (IMAP-based) and Kontact would use GroupDAV. While Kontact worked perfectly, syncing with Thunderbird caused the calendar events to become 'invisible' to both Citadel and Kontact.
Now I am testing eGroupware, where Thunderbird sync's using CalDAV and Kontact still GroupDAV. Now events added by Kontact become invisible to eGroupware and Thunderbird when they are edited using Kontact... The Problem is hence in the way Kontact and Thunderbird handle their iCal entries (at least that's the only explanation I can come up with). Is there a known incompatibility between the iCal libraries of these two Clients? Has anyone had a similar issue? Is there a GroupWare solution that does not require me to setup a while network on a box (as in OpenXChange or Zarrafa) and still allows Thunderbird and Kontact to sync?
