I recently acquired a Dell Vostro 3550 (new model) and today I installed Ubuntu 10.10 (32 bits). I am not able to see the available wireless connections (although the bluetooth is working just fine)... Apparently it is also not recognizing its drivers, since on "Additional Drivers" I have no items.
View 2 RepliesI am currently running Ubuntu9.04 (Jaunty) on a Dell Vostro v13, pre-installed when I got it. I would like to upgrade to the 10.04 LTS but when I try, all goes fairly well until I get to the screen where it wants to set up my keyboard (Step 3). Then comp freezes and I have no use of touch-pad or keyboard, have to just shut off computer and re-install to factory settings to use it again. I have upgraded with USB and through update manager. Neither works. No clean instal from a CD because I don't have a CD drive... I have read in a couple places the inability to use keyboard/touch pad might have to do with the incorrect driver on the VostroV13.
View 2 Replies View RelatedI just installed 9.10 on a brand new Dell Vostro 1520. The WLAN card does NOT work out of the box.
Here is what you have to do.
After install and rebooting insert the live CD
Go to software sources (system > software sources)and check the "officially supported restricted copyright" box
You are then asked to update the available software list, do so.
You will receive an error message since you are not (yet) connected to the internet and all the other repositories are not available.
Now you should be notified that restricted drivers are available, if not you can go to system > hardware. Anyway, now you should be able to activate the Broadcom STA driver. After rebooting you can connect to available wireless networks.
Alternative (in case you are not asked, which happened to me on another Vostro system) system>administration>syaptic package manager
Search for broadcom
Mark b43-fwcutter and bcmwl-kernel-sources for installation
Reboot (who said there is no rebooting required in linux)
The adapter should be up and running ...
how to get the fingerprint recognition working on a dell Vostro?
View 1 Replies View Relatedcan't get to work this, anyone knows how to make it happen? im using opensuse 11.3 64-bit on a dell vostro 320.
View 9 Replies View RelatedI have installed openSuse 11.3, my computer is a Dell Vostro 1500, it has a modem, but is not recognized between the devices. I do not know why. I have not the slightest.Please, someone with enough intelligence to be humble to explain clearly and explicitly that the system can I identify and mount my modem, and can make use of it.If by chance you need some additional information, please specify to me how I can get to the place in this thread.
View 4 Replies View Relatedsetting up CentOS 5.3 (x86_64) on a Dell Vostro 420 Workstation, I came across a few problems/questions:
1. I am using software RAID1 (including sda and sdb), following the tutorial on CentOS Wiki. However, in my case, GRUB wants to install on /dev/md0 (the RAID device mounted as /boot) instead of /dev/sda (which would be the MBR, as usual). This is confusing, since installing to a partition is completely different from installing to the MBR. I suspect it *does* write to the MBR since the system does boot afterwards and the MBR was empty before. So maybe /dev/md0 is just a bit imprecise If yes, is the MBR still written to sda only, so that it is necessary to setup grub on sdb separately, as indicated in the documentation?
2. Sound does not work. The sound controller (ICH10 family) seems to be recognized, but the sound test behaves strangely: Normally, you have the three test sounds, and only after that a window will appear asking for confirmation. On my machine, the confirmation window appears immediately (!) so it seems the system is not even trying to play the sounds. Very strange...
3. I am seeing this damned "BIOS Bug: MCFG area at f0000000 is not E820-reserved" message. (May or may not be related to issue #2) It seems many people have this problem, but there is no real solution. In few cases, a BIOS update did the trick, but I think most hardware manufacturers are not even considering this a bug as long as there are no problems in Windows. It does seem to depend on the distribution, however, so newer kernels obviously have learned to handle the situation. Is this being considered by the upstream provider? Switching to Fedora is not really an option here
Just upgraded from Intrepid to karmic on my girlfriends Dell Vostro 1510 and the wireless stopped working. The drivers are installed and worked fine under intrepid. When I enter the hardware drivers utility it says that the driver is active but currently not being used.
iwconfif output:
Code:
lo no wireless extensions.
eth0 no wireless extensions.[code].....
I've already got the b43-fwcutter package and a driver called 'b43' appears in System > Administration > Hardware Drivers but it does not seem to enable. Another, Broadcom STA wireless driver, does enable, but I'm not picking up the wireless signal.
Code:
$lspci 05:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Code:
$ sudo lshw -C network
SCSI
[Code]...
That's my situation. Didn't work in 8.04, DID work in 9.04 (flawlessly, in fact), and now again does not work in 10.04.
I have the Dell Wireless 1395, Broadcom chipset.
Have an odd problem on a Dell Latitude 13 w/ a Intel WiFi 5100 card. The wifi antenna is disabled on startup into Ubuntu 10.04/64-bit. There's no hardware enable/disable that I can find.I have tried "sudo ifconfig wlan0 up" to enable it, the light for the wifi antenna comes on, but still no luck.I know the wifi works in Ubuntu, because if i load windows first, then reset into Ubuntu, once in a while it works just fine.
View 2 Replies View RelatedI've been running Ubuntu 10.10 on my Dell Vostro 1500 for awhile, one morning I tried to get online & no networks would show up. I tried plugging in my ethernet cable & still nothing. Just the two lights by the plug stay lit up. If I boot into Puppy Linux the wireless works just fine. I was using the B43 driver before I had problems, then when I was trying to get it to work I accidentally deleted the driver. I cannot figure out how to get my internet working again in Ubuntu. I don't want to be stuck using Puppy Linux forever! I don't really know many commands, normally just search online how to fix problems, but it's pretty hard to do when I have to boot back & forth between operating systems to find things to try.
View 9 Replies View RelatedI have Debian Wheezy on my Dell Vostro 1710.
There is a fsck scan happening every 35 mounts on my laptop (i.e. when I boot)
It was fine until a few weeks ago when it started to fail.
Here is the error message :
What should I do to fix that ? I use my laptop to go on the Internet and I don't remember modifying/installing anything that could make this happen.
I found the answer : [URL] ....
I just had to type the root password and run fsck manually as follows : fsck /dev/sda7.
I have a Dell Vostro 1520 laptop and dual boot Windows 7 and Debian 7.8 64-bit. Windows 7 does use a lot of resources and the cooling fan kicks in almost all the time and it's a bit noisy. So I installed Debian which makes a big difference as it uses less resources so the fan is on less often.I just installed LXDE desktop to try to reduce this even further and I must say it is much better but fan still comes on even when laptop is quite cool so not sure why fan is kicking in so early.
Any best software to control when the fan comes on. If there are any good tools that are easy to install for someone who is quite new to linux? URL...
I installed fedora 15 in my dell vostro 3400 laptop so far everything is fine except 'wifi' I'm not able to see my wireless networks
Fedora Release : Fedora 15 (Lovelock) 32 bit
Network Controller is : Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01)
Kernel details are : 2.6.40-4.fc15.i686.PAE #1 SMP Fri Jul 29 18:47:58 UTC 2011 i686 i686 i386 GNU/Linux
And i tried this also ([SOLVED] Fedora 15 Wifi "firmware missing" HP mini 210-1000 ) from the forum itself but unfortunately its not working on this dell laptop
Just installed opensuse 11.2 wifi networks not detected
View 9 Replies View RelatedLinux (CentOS, Red Hat, Ubuntu) operating systems can't recognize my laptop keyboard, and I'm unable to work with it any more. It had been fine but I don't know what's happened to it now. Note that it works correctly in Windows.
View 2 Replies View RelatedI just got a new laptop...Dell Vostro 3500. Took off Win put on Ubuntu...all went fine. I did all updates and app downloads using my WIRED NETWORK as wireless wasnt working. However I was more interested in setting up the new computer. Anyway so after all is installed up pops "Broadcom STA Wireless driver" Proprietary driver do you want to install. Obviously I said yes...
Well now My wireless is working great but for some reason my Wired (auto eth0) no longer works. It just says disconnected and its grayed in. I'm pretty much a newbie but did try a few things like:
apt-get update
apt-get "something" essential (thats not a command just from memory it was something like that)
However I've had no luck. This Broadcom driver seems to have knocked out my wired network.
My Dell Vostro drives my HL-2240 after a normal setup. The setup on my HP mini went exactly the same but would not print the test page or anything else. The HP recognizes the printer. I'm using ubuntu 1010.
View 10 Replies View RelatedI have laptop Dell Vostro V13:
[code]...
I'll provide this info, if this can help to improve Debian on this hardware. I always see this ACPI errors in dmesg:
[ 0.084001] ACPI Error: ACPI path has too many parent prefixes (^) - reached beyond root node (20090903/nsaccess-429)
[ 0.084001] ACPI Error (psargs-0359): [^LPCB.EC0_.LANW] Namespace lookup failure, AE_NOT_FOUND
[ 0.084001] ACPI Error (psparse-0537): Method parse/execution failed [] (Node c14edd50), AE_NOT_FOUND
i also attached full dmesg, and some outputs. Hope, that this can be useful for core developers.
I've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?
View 3 Replies View RelatedI have a Dell Vostro 3500, which has a Broadcom wifi card. It requires non free drivers. So far it has been working well. However, after updating the kernel (via yum update), my wifi card (it used to be eth1) is totally gone: $ ifconfig eth1 eth1: error fetching interface information: Device not found The wireless indicator does not light up either. The kernel version is
[code]...
We do server backups to USB HDD's. Neither of our known good backup drives are being recognized by our 10.04 server, fully updated. Additionally, I plugged in my SanDisk 4GB USB mem stick, and it is not recognized either. I am used to seeing the kernel do some PnP messages in either /var/log/messages or /var/log/syslog and I am not seeing any blips there what so ever of the USB drives being plugged in. Did something happen to USB PnP with some latest update? USB HDD's were being recognized recently, like six weeks ago...
View 9 Replies View RelatedAlright so i'm trying to install ubuntu 11.04 except it's not recognizing my hard drives. I have two 80gigs plugged in via sata. And neither of them are being recognized by ubuntu. I have tried plugging them in together, and separately, still nothing. I'm getting pretty frustrated. Ubuntu 11.04 just doesn't seem to be working for me. I can run from the liveCD, but i get no unity desktop environment
View 3 Replies View RelatedI have Dell Vostro laptop with Core2 processor 1.8 GHz, 2 GB RAM. I want to install Fedora. I tried to install it with Fedora_14_ 32 bit and Fedora_14_ 64 bit. After booting by DVD or USB, I get initial blue screen in which I select Install and it starts for few seconds and freezes there, it does not move ahead. I got Fedora 32 bit DVD from Fedora so it should have come with checksum checked. So IMO DVD is ok, it is something else with regard to hardware detection, stopping installation to go ahead. I tried 3 times, but do not go ahead.
View 4 Replies View RelatedI have a total of 4 hdd's, 500gb 7.2rpm that I would like mirrored using raid 10. As you can see from the image, ubuntu 9.10 server isn't recognizing the full 2tb's. In fact, I'm not even sure about the configuration as I was thinking the HDD's would come up as four 500gb hdds. Instead I have the configuration above set and ready for Ubuntu to be installed on.
1. Is this typical of a server pre-configured from Dell(perc6 raid controller.
2.Why is ubuntu not recognizing the full capacity of the drives especially when it's a server install?
I have a Dell Vostro 3300, i5 460 processor with a NVIDIA 310M Graphics Card. I'm doing a KUBUNTU 10.10 (Maverick) install with the following results. The Live CD boots just fine to, "TEST," or "Install." Installation goes fine. However, the graphics card being used is the Intel i915. I have tried installing the NVIDIA drivers directly from the, "Additional Drivers," tool and after the reboot I get through the boot screen to the console. I try to manually startx and I get the errors, "no device found," "no screens found." The second install I tried purging and blacklisting the nouveau drivers and entering safe mode. Then using apt-get install nvidia-current. After that, nvidia-xconfig. Same results.
The third attempt I re-installed and this time downloaded the drivers from the Nvidia site (version 256.53). Blacklisted nouveau, remove all nvidia, updated initramfs, etc. The install went fine however I still end up at a console after boot with the same messages as above. No device found, no screens found. I've tried searching through the forum and web and have tried things like adding the modset option along with many other hacks, tips and fixes. still, no go.I can live with the Intel graphics for now although I lose 512MB of memory. Unfortunately there is no way to disable or change this set-up in the BIOS. I've seen quite a few bug reports at Launchpad:
1. Is this something I should just wait til a fix comes? Will a fix come?
2. Is there, or will there be an official Updated Ubuntu Guide for Maverick to install NVIDIA drivers with this tecnology?
3. Lastly, is there anything else I should try??
I am having a problem installing SR drivers for my IBM x3550 and x3550 M2 servers that have CentOS 5.x
The files I am using are:
ibm_dd_mptsas_4.22.80.04_rhel5_32-64.tgz
ibm_dd_aacraid_1.1.5.24702_rhel5_32-64.tgz
It seems it is asking for kernel-xen-devel
1. Am I using the correct files?
2. Is it safe to install kernel-xen-devel?
I am using Dell Inspirion 1545 core 2 duo T6600, 3 gb ram,320 gb sata hddand in my bios i got 4 option (1) disable which disable sata and hdd is not detected (2) ATA where in my M$ is working(3) AHCI which mode will work. also i am using vm-ware to installed redhat linux 5.my hdd did not detected. do u need any information tell me i will post it on the same any command out put or log by which we can solve this problem.
View 1 Replies View RelatedFedora is having trouble identifying a raid partition, it sees them as separate drives. I got drivers from dell, but during a Fedora dvd install, it mentions nothing about a place to install extra drivers.
When it says it must "initialize" the drives, Fedora then breaks the dell bios raid. How to either install the dell drivers or make Fedora see the raid partition as one?