My Dell Vostro drives my HL-2240 after a normal setup. The setup on my HP mini went exactly the same but would not print the test page or anything else. The HP recognizes the printer. I'm using ubuntu 1010.
View 10 Replies
I've already got the b43-fwcutter package and a driver called 'b43' appears in System > Administration > Hardware Drivers but it does not seem to enable. Another, Broadcom STA wireless driver, does enable, but I'm not picking up the wireless signal.
Code:
$lspci 05:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01)
08:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
Code:
$ sudo lshw -C network
SCSI
[Code]...
I recently bought an HP mini 1030NR and wanted to get fedora on it. I found this and it pretty much guided me right through the process. I thought it might be helpful for others.[URL]..
View 3 Replies View Relatedafter installing linuxmint lxde on my netbook the microphone wasnt working i followed the guide here [URL] and now nothing audio related is working, when i open alsa mixer it is completly blank, i dont even have the little speaker icon in the corner anymore. I would like to get all audio working with the microphone but priority right now would be getting back to were i started upon doing that modprobe command thingy the device does show up... also upon following that guide it made a folder in my home directory called soundtmp... and it wont let me delete it, how can i delete it?
View 11 Replies View RelatedI have tried several different distros - but none seems to work. The pc is a HP mini 1000 with 16 Gb flashdisk, 1 Gb ram, American keyboard. It had an Win Xp installed when it was bought. Later it worked with an Ubuntu. My older son, who owned the pc before me, will not give me his password. He wanted me to install a fresh, new Linux.
I have now tried to install Ubuntu, Knoppix, PcLinux, Mandriva, Feodora and a few more, using the universal usb installer. Ubuntu, Slacks and Mandriva works fine from the usb-key. But when I try to install to the minis flashdisk, it freezes.
Ubuntu stops during the install process just after I have selected the keybord (I have tried default English and Danish).
Mandriva lets me format the flashdisk, but freezes with white screen just before the install is finished. There after Mandriva can start booting from the minis flashdisk, but it stops for a long time showing the startup screen. After very long time I get a terminal screen asking for login name and password. (I guess Mandriva wants the password from my sons Linux installation).
I just installed Ubuntu Netbook Remix on my MP Mini 1000 and I have run into some troubles.First off, my wireless card doesn't seem to work out of the box. I figured that I would just plug into my router via ethernet and run updates, but then I ran into my next problem.
Nothing happens when I plug in an ethernet cord. I have a desktop running Windows 7 and a jumpdrive, so I can use those to get the files I need, but I don't really know how to fix this issue.I believe my wireless card is a Broadcom 4312, but I am unsure what ethernet card I have. If possible, I would like to just get the ethernet working and then let the restricted drivers manager take care of the rest.
I just recently installed Ubuntu on the HP Mini 1000 and the drivers for the WiFi aren't working correctly. Is there a place where I can download the Drivers for WiFi and get them to install.
View 1 Replies View RelatedI installed the netbook version of ubuntu 10. Problem is no wireless networks show up. So I have an eternet connecting. Only problem is when I plug that in, still no internet. I need to download drivers to make the wireless work.
View 1 Replies View RelatedMy Dell Vostro 1520's Dell Wireless 1397 WLAN Mini-Card must not have been set-up correctly, as the Network Manager won't even let me select the wireless tab. Please just explain to me, step by step, what exactly I must do to make it work! Additionally, I can't figure out how to disable my Touchpad's Tap to Click funtionality, which must be done if I'm to effectively use my current KDE installation of openSUSE
View 9 Replies View RelatedI am currently running Ubuntu9.04 (Jaunty) on a Dell Vostro v13, pre-installed when I got it. I would like to upgrade to the 10.04 LTS but when I try, all goes fairly well until I get to the screen where it wants to set up my keyboard (Step 3). Then comp freezes and I have no use of touch-pad or keyboard, have to just shut off computer and re-install to factory settings to use it again. I have upgraded with USB and through update manager. Neither works. No clean instal from a CD because I don't have a CD drive... I have read in a couple places the inability to use keyboard/touch pad might have to do with the incorrect driver on the VostroV13.
View 2 Replies View Relatedcan't get to work this, anyone knows how to make it happen? im using opensuse 11.3 64-bit on a dell vostro 320.
View 9 Replies View RelatedI recently acquired a Dell Vostro 3550 (new model) and today I installed Ubuntu 10.10 (32 bits). I am not able to see the available wireless connections (although the bluetooth is working just fine)... Apparently it is also not recognizing its drivers, since on "Additional Drivers" I have no items.
View 2 Replies View RelatedI have installed openSuse 11.3, my computer is a Dell Vostro 1500, it has a modem, but is not recognized between the devices. I do not know why. I have not the slightest.Please, someone with enough intelligence to be humble to explain clearly and explicitly that the system can I identify and mount my modem, and can make use of it.If by chance you need some additional information, please specify to me how I can get to the place in this thread.
View 4 Replies View Relatedsetting up CentOS 5.3 (x86_64) on a Dell Vostro 420 Workstation, I came across a few problems/questions:
1. I am using software RAID1 (including sda and sdb), following the tutorial on CentOS Wiki. However, in my case, GRUB wants to install on /dev/md0 (the RAID device mounted as /boot) instead of /dev/sda (which would be the MBR, as usual). This is confusing, since installing to a partition is completely different from installing to the MBR. I suspect it *does* write to the MBR since the system does boot afterwards and the MBR was empty before. So maybe /dev/md0 is just a bit imprecise If yes, is the MBR still written to sda only, so that it is necessary to setup grub on sdb separately, as indicated in the documentation?
2. Sound does not work. The sound controller (ICH10 family) seems to be recognized, but the sound test behaves strangely: Normally, you have the three test sounds, and only after that a window will appear asking for confirmation. On my machine, the confirmation window appears immediately (!) so it seems the system is not even trying to play the sounds. Very strange...
3. I am seeing this damned "BIOS Bug: MCFG area at f0000000 is not E820-reserved" message. (May or may not be related to issue #2) It seems many people have this problem, but there is no real solution. In few cases, a BIOS update did the trick, but I think most hardware manufacturers are not even considering this a bug as long as there are no problems in Windows. It does seem to depend on the distribution, however, so newer kernels obviously have learned to handle the situation. Is this being considered by the upstream provider? Switching to Fedora is not really an option here
I have Debian Wheezy on my Dell Vostro 1710.
There is a fsck scan happening every 35 mounts on my laptop (i.e. when I boot)
It was fine until a few weeks ago when it started to fail.
Here is the error message :
What should I do to fix that ? I use my laptop to go on the Internet and I don't remember modifying/installing anything that could make this happen.
I found the answer : [URL] ....
I just had to type the root password and run fsck manually as follows : fsck /dev/sda7.
I have a Dell Vostro 1520 laptop and dual boot Windows 7 and Debian 7.8 64-bit. Windows 7 does use a lot of resources and the cooling fan kicks in almost all the time and it's a bit noisy. So I installed Debian which makes a big difference as it uses less resources so the fan is on less often.I just installed LXDE desktop to try to reduce this even further and I must say it is much better but fan still comes on even when laptop is quite cool so not sure why fan is kicking in so early.
Any best software to control when the fan comes on. If there are any good tools that are easy to install for someone who is quite new to linux? URL...
I installed fedora 15 in my dell vostro 3400 laptop so far everything is fine except 'wifi' I'm not able to see my wireless networks
Fedora Release : Fedora 15 (Lovelock) 32 bit
Network Controller is : Broadcom Corporation BCM4313 802.11b/g LP-PHY (rev 01)
Kernel details are : 2.6.40-4.fc15.i686.PAE #1 SMP Fri Jul 29 18:47:58 UTC 2011 i686 i686 i386 GNU/Linux
And i tried this also ([SOLVED] Fedora 15 Wifi "firmware missing" HP mini 210-1000 ) from the forum itself but unfortunately its not working on this dell laptop
Just installed opensuse 11.2 wifi networks not detected
View 9 Replies View RelatedLinux (CentOS, Red Hat, Ubuntu) operating systems can't recognize my laptop keyboard, and I'm unable to work with it any more. It had been fine but I don't know what's happened to it now. Note that it works correctly in Windows.
View 2 Replies View RelatedI just installed 9.10 on a brand new Dell Vostro 1520. The WLAN card does NOT work out of the box.
Here is what you have to do.
After install and rebooting insert the live CD
Go to software sources (system > software sources)and check the "officially supported restricted copyright" box
You are then asked to update the available software list, do so.
You will receive an error message since you are not (yet) connected to the internet and all the other repositories are not available.
Now you should be notified that restricted drivers are available, if not you can go to system > hardware. Anyway, now you should be able to activate the Broadcom STA driver. After rebooting you can connect to available wireless networks.
Alternative (in case you are not asked, which happened to me on another Vostro system) system>administration>syaptic package manager
Search for broadcom
Mark b43-fwcutter and bcmwl-kernel-sources for installation
Reboot (who said there is no rebooting required in linux)
The adapter should be up and running ...
how to get the fingerprint recognition working on a dell Vostro?
View 1 Replies View RelatedJust upgraded from Intrepid to karmic on my girlfriends Dell Vostro 1510 and the wireless stopped working. The drivers are installed and worked fine under intrepid. When I enter the hardware drivers utility it says that the driver is active but currently not being used.
iwconfif output:
Code:
lo no wireless extensions.
eth0 no wireless extensions.[code].....
That's my situation. Didn't work in 8.04, DID work in 9.04 (flawlessly, in fact), and now again does not work in 10.04.
I have the Dell Wireless 1395, Broadcom chipset.
Have an odd problem on a Dell Latitude 13 w/ a Intel WiFi 5100 card. The wifi antenna is disabled on startup into Ubuntu 10.04/64-bit. There's no hardware enable/disable that I can find.I have tried "sudo ifconfig wlan0 up" to enable it, the light for the wifi antenna comes on, but still no luck.I know the wifi works in Ubuntu, because if i load windows first, then reset into Ubuntu, once in a while it works just fine.
View 2 Replies View RelatedI've been running Ubuntu 10.10 on my Dell Vostro 1500 for awhile, one morning I tried to get online & no networks would show up. I tried plugging in my ethernet cable & still nothing. Just the two lights by the plug stay lit up. If I boot into Puppy Linux the wireless works just fine. I was using the B43 driver before I had problems, then when I was trying to get it to work I accidentally deleted the driver. I cannot figure out how to get my internet working again in Ubuntu. I don't want to be stuck using Puppy Linux forever! I don't really know many commands, normally just search online how to fix problems, but it's pretty hard to do when I have to boot back & forth between operating systems to find things to try.
View 9 Replies View RelatedI have laptop Dell Vostro V13:
[code]...
I'll provide this info, if this can help to improve Debian on this hardware. I always see this ACPI errors in dmesg:
[ 0.084001] ACPI Error: ACPI path has too many parent prefixes (^) - reached beyond root node (20090903/nsaccess-429)
[ 0.084001] ACPI Error (psargs-0359): [^LPCB.EC0_.LANW] Namespace lookup failure, AE_NOT_FOUND
[ 0.084001] ACPI Error (psparse-0537): Method parse/execution failed [] (Node c14edd50), AE_NOT_FOUND
i also attached full dmesg, and some outputs. Hope, that this can be useful for core developers.
I just got a new laptop...Dell Vostro 3500. Took off Win put on Ubuntu...all went fine. I did all updates and app downloads using my WIRED NETWORK as wireless wasnt working. However I was more interested in setting up the new computer. Anyway so after all is installed up pops "Broadcom STA Wireless driver" Proprietary driver do you want to install. Obviously I said yes...
Well now My wireless is working great but for some reason my Wired (auto eth0) no longer works. It just says disconnected and its grayed in. I'm pretty much a newbie but did try a few things like:
apt-get update
apt-get "something" essential (thats not a command just from memory it was something like that)
However I've had no luck. This Broadcom driver seems to have knocked out my wired network.
I've installed fc10 but I got some problem with the audio driver for my Dell Vostro 1700. In particular line input doesn't work correctly neither the built in microphone, neither the line input. Is there a special driver?
View 3 Replies View RelatedI have a Dell Vostro 3500, which has a Broadcom wifi card. It requires non free drivers. So far it has been working well. However, after updating the kernel (via yum update), my wifi card (it used to be eth1) is totally gone: $ ifconfig eth1 eth1: error fetching interface information: Device not found The wireless indicator does not light up either. The kernel version is
[code]...
I just installed Fedora 15 on my HP mini 210-1000, everything is working fine except my wifi is not up. It says firmware missing. How do i fix this problem? Previously I used to have Ubuntu 11.04 on it and wifi worked fine, but I need Fedora as i am using .rpm based applications. So please assist me in getting my Wifi up! lscpi gives this:
Code:
02:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
*edit* sorry, found a solution in another post on the forum : [URL]...
