Ubuntu :: Dead Space When Using Second Monitor With Laptop?
Jun 1, 2010
I've just set up Mint Linux 9 (Isadora) on my laptop (Compaq R4000), and I'm having an issue with 'dead space' when using a second monitor. Because the aspect ratios on the two monitors I'm using are different (the laptop is widescreen, the other isn't) I'm getting dead space above (or below, depending on its positioning in the virtual desktop) where the mouse will hide. It's not a huge problem, but it's bugging me like nothing else.
Is there a convenient work-around for this problem?
I've been playing around with two tiling window managers, scrotwm, and xmonad. I like xmonad better, but that's not the point. The point is that they both produce these strange black bars at the bottom when a terminal window is opened. Note that this does not happen in fluxbox/openbox, my other wm. Its hard to explain, so please see the screenshots: [URL] Note the black bar, or just dead at space the bottom of the the terminal windows. In the third image, the prompt is at the "bottom" of the window, or what should be. Again, this only happens in scrotwm and xmondad, no other wm's I've tested.
We have a quad core Intel Xeon E 5410 processor running on recently installed centOS 5.5. Machine can't be pinged all of sudden and when we switch on the monitor, no signal on it, even no response on keyboard. We thought the problem accorded with abrupt temperature changes, is it so? But we have similar machines running efficiently under same temperature conditions.
I am running on ubuntu 10.04 and using the latest nvidia driver. What I experience is a random black screen, my monitor goes dead and won't turn back on till I hardboot. I had this issue on windows and solved it by downloading rivatuner and telling it to force my 9700m into staying in 3d performance mode at all times. I know it has nothing to do with temps or anything like that. All I need to know is how I can duplicate what I did with rivatuner on windows
I have an Acer Aspire 6930g with an nVidia GeForce 9300m GS which has a broken screen. I have been using an external monitor for some time using Linux Mint, without issue.
I initially set this up with great difficulty using the small parts of the screen that would still display an image at the time. Now, however the screen is totally dead, I have since disconnected the laptop monitor in order to not cause issues.
The issue I am currently having is trying to use live distros.
I'll give you example: I boot ubuntu 9.10 32bit and it gets to the initial boot menu. I choose "Try Ubuntu..." It shows the loading screen. Screen goes blank when going to desktop
I tried Ctrl+Alt+F1 to get to a terminal, but the screen stays blank. The same thing happens with both Knoppix and Backtrack 4 as well. The display goes blank upon switching to the desktop.
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again. When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
This has been consistent with all 4 of my Ubuntu installs (1 wubi, 1 minimal, 2 full cd). Of note, it's on the same machine, but on 2 different hard drives and with various configurations of different hard drives being plugged/unplugged. I apologize for the terrible drawing but it should get the point across. That space about a third of the way up, clicking in it does nothing. The cursor doesn't change whether it's over a link or text or a file or anything. The spot hasn't moved over 4 installations. I don't even know what to google... (I'm just assuming it's a rectangle like that from moving my mouse around it, there's nothing actually on the screen to indicate that there's an actual thing in the area preventing me from clicking.) Weird! And incredibly annoying, I've never heard of anything like this. Has anyone had this problem, if so how was it solved?
I been running both OS's for a few months now with no major problems besides wireless internet issues. Today, however, as I go to boot my laptop up, the Dell logo loads with the F2 and F12 boot and setup options which both work. Directly after that though I get the message "GRUB loading. Symbol '?' not found. Aborted. Press any key to Exit." then it repeats when I push a key, and then it tells me to press F1 to retry, F2 to go to setup, or F5 to run diagnostics. It passes all the tests in diagnostics. I've tried booting off of the ubuntu cd I used to load it initially with no luck. So I'm stuck at either that error message or in setup but I can't go any further, and it does not change anything when I tried to boot from the cd.
The problem I have is that my monitor broke but that is no fault of ubuntu and I intend to fix it at a later date. Because my monitor broke I'm left with a PC with ubuntu installed and an old laptop with vista, I was wondering if it is possible to connect the pc and laptop and use the laptop only for a monitor/screen?
I successfully before install Ubuntu on my last laptop along with windows vista and it was rather easy because ubuntu allowed me to partition the disk so simply. However, on my vaio, my whole hard disk is partition and there is no unallocated space. It will not allow me to partition the disk and when I boot up the ubuntu live cd to install, the partitioner doesn't look the same and I'm hesitant to make any changes because I'm afraid I'm going to damage my data. I have a 500GB HDD in which I want to use just 60GB for Ubuntu and the rest for Windows 7. Also, I'm running 64-bit Windows if that matters at all.
I have 2 laptops. Currently I have installed Ubuntu 10.10 on one of them. I have Windoze XP installed on the 2nd laptop. I would like to use my second laptop as my secondary monitor since I hardly use Windoze. Is there a way we can use a laptop as a secondary monitor with Ubuntu installed on the first machine (again a laptop in my case).
i had configured the opennms but i didint able to get the disk space and memory alert by mail... and also i need a plgin gor opennms can u tell me wat plugins suit for opennmms monitoring tool ...
Is there any way, how to make connecting monitor to my laptop as easy as it is e.g. in Windows? Just plug-n-play? I've just installed last version of Ubuntu and then connect monitor. After connecting monitor nothing happened (my laptop LCD doesn't get blinked and it doesn't try to use the monitor as a second one). So I went to Monitors configuration, where I saw "Mirror screens". I've unchecked "Same image in all monitors" and applied, also nothing happened. The monitor is still just black. Is there any application which would make this stuff easier for me? I have HP ProBook 5320m with some Intel HD graphic card inside and 21.5" LG W2240T-PN monitor.
Mine is, ever since I installed the (wrong) opensource video driver for my Ubuntu 9.04 & Lenovo ThinkPad T41 (the one model, imho, they should never have let out the door!), uninstalled it by far-less-than-recommended means (ie, I used Synaptic and sudo apt-get remove and apt-get purge). End up is now my screen has a max resolution of 800 x 600, and Display panel insists that this laptop's screen is an "Unknown" Monitor.
Any tweaks to /etc/X11/xorg.conf (adding vertical refresh and horizontal sync rates for example) has resulted in its own weird behavior. On having my password accepted at login, there's a half-second of white that "rolls" over the screen horizontally. The next thing I see is a diagonal broken streak of white about 2 1/2" down from the top of the screen and 3 inches in from the right-hand side. The next thing I see is a buzzed,jagged rendition of my normal desktop. Nothing at all is clear, and the jags seem to redouble themselves the further one scans down on the screen. The only thing one can do in this situation, and I've done so enough times to know, is a hard reboot (power button for ten seconds or however long it takes).
And as I don't rate sh*t for a shilling on the Ubuntu forums, and as Google has been worse than useless every time I search for problems as detailled as these (it's like K-Mart: it has what you want until you go to look for it!), and as my one self-styled "Lunix-Geek" friend (now in the UK) has only briefly battled the xserver-xorg beasts, I'm coming here to see if anyone knows something else I could do besides bite the bullet, say goodby to my accumulated goodies, and reinstall Ubuntu.
Possible Duplicate: Can I use my laptop as a second monitor for my desk computer?
My PC's monitor just died and I'm not looking at buying a new monitor anytime soon. So I'm thinking of using my laptop's monitor for it. Both machines are running on Fedora linux.
The laptop is a samsung X30 and i spent days trying to install ubuntu 10.04 unsuccesfully as there was no clear picture on the screen, just a black and purple splodge. I then saw a post on these forums discussing the default resolution of ubuntu and how it is incompatible with some machines so via VGA cable i connected it to my TV and sure enough i could see what was going on and finished the installation process. I assumed that once ubuntu was fully installed i would be able to change the resolution using the monitor preferences but none of them worked. I am now faced with the problem that unless plugged into the TV i have no picture on my laptop, does anyone know why my laptop screen wont work with ubuntu and how
I have connected to the VGA output of my laptop a 19" monitor. I setted in Ubuntu the resolution for that monitor to 1280x1024.
Two days ago i connected the laptop to a projector. When Ubuntu detected the projector it ask me for my user password to change "i dont know what".
After using the projector I have connected the laptop to the 19" monitor again. Now I can not set the resolution for the monitor to 1280x1024 (that resolution doesn't appear in the list)....
I was given a Samsung SMB 2330 (TFT) monitor for Christmas. It is pretty nice and nice and big. Here is the problem: when I connect it to my laptop (Dell XPS M1530 with nVidia GeForce 8600M) I can use the Nvidia Settings Manager to view and use both screens, but on the Samsung screen there are lighter colored blurry lines that race up and down. You don't see this so much on lighter windows, but any darker color shows them clearly. This is a constant whether I set the refresh rate on "auto" or 60 kH (which is what the manufacturer says it should be).I can't for the life of me figure out how to get rid of this problem. I am fair to middling on my Linux experience, but this is the first time I have wrestled with dual monitors and I'd really appreciate any pointers The screen is great, but the flicker is distracting to say the least.
I have an acer aspire one netbook and in display properties it says the monitor is unknown. The trouble is that the screen is widescreen (16:9) but it has it as (4:3)so the screen is sort of stretched. Is the a terminal command as another way round this or how can i get the screen recognised?
I have been using Ubuntu for a while now on my netbook, however I have an older HP dv5 laptop that hasn't been used in a couple of years that I would like to format and install a linux distro on. Problem is that it has a very broken LCD screen and I had been previously using an external monitor with it. I had tried to install Ubuntu 9.04 on it at one point but could not progress very far into the installation due to the external monitor. I had also tried using the non-graphical installer but had little success with it as well.
I had thought of removing the HDD from the laptop and putting it into another of my laptops and installing it that way, but the specs are different between the two laptops and I figured that it would not work properly once the HDD was switched back to the older laptop. Is there any way to use an external monitor to install a newer version of Ubuntu? or perhaps is there another distro that is easily installed using an external monitor? My plan is to eventually remove the broken screen all together and only have the external monitor connected, the broken screen is a bit unsightly.
I am looking for a way to switch quickly and easily between my Laptop Display and my External Monitor, in Windows I had it configured so that when I plugged my Monitor in it would switch to that and when I removed it it would switch back to Laptop Display. From what I have tried it looks like this isn't possible with Linux, but I would like to get to the stage when I can click an icon to switch (or 1 to go to External and 1 to go to Laptop) My Laptop has an ATI Mobility Radeon HD 4500 Series Graphics Card and I have so far noticed the following issues.
1. If I use the Gnome Monitors instead of ATI Catalist Control Centre it seams to cause some strange issues include confusing Linux on what the max screen res supported by my External Monitor is.
2. When I try and enable/Disable either Display or change Resolution, I am told that I have to reboot before the changes take affect.
I have installed Ubuntu 9.10 on my laptop Lenovo T60. The problem is i can't make extended monitor in that way: laptop 1024x768 and Monitor LG L1952HQ 1280x1024. If i make this configuration, screens appear black and i can't go back without restarting. Presently system support only: laptop 1024x768 and LG L1952HQ 800x600. This configuration (laptop 1024x768 and LG L1952HQ 1280x1024) worked well previously with the same ubuntu 9.10 before reinstallation. I guess i should reinstall ore change to other video drivers? The refresh rate is set on 60 Hz.
I've been unable to connect an external monitor to my laptop running 10.04, even though the resolution and framerate are right. The monitor says something like "unsupported video settings".
In other news, I put the live cd into another computer which relies on a monitor and after the very first screen with the two logos at the bottom, the monitor decides to go to sleep. I try with another monitor and it just seems to have to feed. This is the more important problem, but I wonder if there isn't some built-in problem with 10.04.
I'm a new user and recently installed ubuntu on an old samsung laptop, during the installation process i couldnt see anything on the screen and came to the conclusion that ubuntu's default resolution was different to that of the laptop screen so i plugged it into my TV and sure enough it worked however i still only have a picture on the tv, ive tried all the resolutions available in the 'monitors' box but nothing, does anyone know how to fix this?
I don't know if it sounds weird but I've been trying for weeks with no result. I want to plug my external monitor through my laptop's vga plug, close the lid and work on my monitor instead of the laptop's monitor. I looked through the gnome power management settings and when the laptop lid is closed it can only suspend, blank screen, hibernate or shutdown. I can plug my monitor and I have clone displays and it works fine but I can' find a way to shutdown the laptop screen without shutting down the vga outlet. Its a brand new Acer aspire 5734Z with a 15,6 inches screen (wich is why I want to plug in my 19 inches monitor and work on bigger screen)
I am a both rhel5 and fedora user.I can not configure my Samsung syncmaster 632nw monitor to display full screen at 1360X768.There is huge black space both left and right side of the monitor. I have tried many times to solve it but unable to do it.The max screen resolution is 1024*768 and minimum is 640*480.
I am using my laptop, hp compaq6710b with an external screen connected to that with the extended desktop options, which really increases the efficiency for programming and reading documents and doing changes.
I was wondering how to connect a 2nd external monitor to the laptop. Laptop has one VGA output apparently which is connected to the external monitor for the moment. I saw that there are some converters from usb to DVI-D or VGA. I guess these connectors can make the conversion I am looking for. Anybody used these connectors with debian to get an extended desktop on 3 screens(2 external monitors + laptop screen).
I have slackware 13.1 installed on my laptop and use kde.I just bought a new external monitor 1680 X 1050. The laptop's monitor is 1280 X 800. From KDE i configured laptop's screen to be inactive and the external monitor at resolution 1680 X 1050. When i boot and enter KDE both monitors are activated, ican't understand their resolution. Then, just when i enter system configuration-monitor-monitor configuration the laptop's monitor automaticly turns off. Then i configure the external to 1680 X 1050 resolution. This happens every time i have to enter slackware. How to setup my xorg.conf file. You can see it below:
