Ubuntu :: DVI Only From Live CD Not From Boot Disk
Sep 13, 2009
I am running Jaunty with a BFG 6600 and a ViewSonic 2235wm Monitor. The monitor has both a DVI and VGA Analog port. I have been running DVI for the past two months with a clean install of Jaunty and prior with Feisty for two years. I just rebooted from hard disk and the screen was black. I connected the analog cable (now have both connected which is ok) and the analog works fine but I cannot switch to DVI using the buttons on the monitor. Here is what I did so far: I booted from the Live CD and both DVI and VGA work fine.
I could switch between using the monitor controls. When I boot from the hard disk only VGA works so I uninstalled the nvidia drivers, rebooted, reinstalled nidia and rebooted and have the same problem. No DVI. I do not think the problem is with the nvidia drivers since this happens before you fully boot up. The only thing I can think of is to reinstall the entire OS but then I will have to spend hours getting my configuration the way I like it. The fact that is works OK from Live CD tells me the DVI ports on both the monitor and video card work and the cables are ok.
I accidently deleted my ubuntu partition, and when boot I get this message:GRUB loading.error:unknown filesystemgrub rescue>I can't get into my bios options either... I just see the MSI splash screen and it cuts right to this error message.
I successfully booted OpenSuse 11.2 from DVD. But I could not configure my wireless internet connection. YAST said it couldn't configure it because something else was controlling that (Network Manager? something like that)How can I configure this. Related issue. When booting from DVD is there a way to save configuration settings so I don't have to start from scratch the next time I boot from DVD?
I have been frustrated attempting to get Grub2 to boot a Debian Live system from hard disk. Have set aside a 4gb partition /dev/sda1 to contain the Debian Live and some other recovery tools. I actually have them all working from a 4gb USB stick successfully, but getting it to work on my HDD has proved challenging. On USB, I have PartedMagic, Gparted, Grml, and of course my standard 6.01 Squeeze. I have also managed to get the Debian Live booting from that USB stick. Very slick.
However, I can NOT get Debian Live to boot from my HDD; altho all of the others above boot fine. Have tried it two ways - one using an iSO image, which is how it is done on my USB stick. The other attempt is to copy the entire contents of the ISO to a directory.
Here are my directory structures:
debian_live_gnome_squeeze_i386- contains the following: debian-live-6.0.1-i386-gnome-desktop.iso initrd.gz initrd.img vmlinuz which is how it is laid out on my USB stick debian_live - contains the files from the ISO image The error I get is something like "panic unable to find live filesystem" My grub.cfg snippet for the two methods I have tried - the 2nd menuentry is similar to how it works on the USB stick.
menuentry "Debian 6.01 Live (on /dev/sda1)" { insmod part_msdos insmod ext2 set root=(hd0,msdos1)
[code]....
Probly don't really need to get it working since PartedMagic can do almost everything I need for recovery and I can use the USB for reinstall or whatever else.
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System: Barton 3200+ with 1GB of DDR1 Asus A7V333 High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
Is there a way to re-install grub on the master boot record of a hard disk using a live cd?If so will i have to configure it?I'm trying to install a linux distro on my ao751h(with poulsbo ) but i after installing it i can't boot.I get an error 15 or a flashing underscore.I have already tried ubuntu,debian,mint and slackware(LILO isn't compatible with poulsbo).Also,does anybody experience problems with the ubuntu 10.04 and 10.10 installers or is it only me?when i choose the language and keyboard settings the installation stop as it is and i get a crash report.
Its basically an old SATA Hard Drive with a Windows XP partition I was trying to sell.When my computer does the BIOS checks, it doesn't pass the SMART test (but I can boot it anyway), although I can't boot Linux in any way with this Hard Disk connected (I even tried Live CD distros, like Parted Magic).I can boot the XP partition from inside the disk, although I guess its pretty close to not being able to. Is there any way to "fix" this Hard Drive?
I need little help on live disk creation and disk image backup.
Can I create live disk using my hard drive installation? If yes then, can I restore the fedora from the live disk to the hard drive. I mean to say that from that live disk can I install fedora again in my hard drive.
Second question is, if I create the disk image of my hard drive( including ntfs & FAT32 partition) , can I restore it in a blank drive. If so , then can os will be restored also?
I installed linux from a live disk. Now I went through all the nonsense to install and it tells me my user name and password is wrong. This crap is worse than windows. What gives? Dont tell me about well maybe you used the wrong anything proper case etc. I did that all several times to NO avail! Why I cant log on to my own computer?
WinXp sp3 is on disk sdb, then installed Ubuntu 10.04 on sda, can go into diff OS without any problem. I am going to move sda to another machine, when I unplug sda, WinXp can't start to boot on sdb. How to fix it?below is my case output$ sudo fdisk -l
Disk /dev/sda: 160.0 GB ... Device Boot Start End Blocks Id System
I'm using a dell XPS M1530 laptop with windows vista and ubuntu 10.04. Last week when I turned on my laptop I got an error saying internal hard disk not found. When I called dell support, I have been told that my hard disk is dead. I have few important stuffs in my hard disk for which I don't have any back. So I tried using ubuntu live CD to back up my data as in the link below.[URL]..I'm using ubuntu 10.04 live CD(64 bit). When I go to my places after booting from the live CD I can't see any partition showing my hard disk. I can see "Computer". When I go in it I can only see "File System" and nothing related to my partitions in my HDD. What should I do now? Do I need to mount my hard disk or is my HDD completely dead?
I'm running a Lucid Wubi system and I just got everything exactly the way I like it. My brother was having a hard time with Windows and I recommended Linux. Well being the inpatient person he is, he wasn't impressed with it "right out the box". But he's seen my setup and still wants to give it a shot. So I was curious if there was a way to create a Live CD from the way I have it already instead of downloading the "start-up" version from the site? I think they call them distros but I'm not for sure. This would be great I think to help introduce my brother and others to this awesome OS, and plus when I mess with the wrong things(which I have, and will again) I could re-install it from where I was instead of having to redo everything.
When I installed Lucid several months ago, I went ahead and let Ubuntu use the entire disk. Since then I have learned more about partitions and came to realize that I didn't have a separate /home partition, meaning that clean installs of new Ubuntu releases would wipe my data. I would like to carve my hard drive up from the LiveCD environment while preserving my current data and Lucid installation.
I have a (slightly complicated) dual/multi boot system.
I keep getting boot errors (when choosing ubuntu from the grub2 menu)
Code: Serious errors were found while checking the disk drive for /boot
If I switch off and restart, ubuntu will then start without issue.
My setup is like this ....3 disks, one with 10.10 clean install - so Grub2, separate partitions for /, /boot and /home, one with windows 7, one with windows XP and 10.04 wubi (this is my old disk which I will trash once I'm happy with my upgrade to 10.10 & 7 on separate disks.
I installed 7 and 10.10 with ONLY their disks installed. After both were working, I added all disks and rejigged the grub2 menu (using update-grub and StartUp-Manager).
This problem only seems to occur if my previous boot was not 10.10 ( I will investigate this further). It's as if something (grub2 ?, the bios ?) is remembering part of the previous boot and not using the grub2 menu completely.
i'm having some problems booting ubuntu 9.10 and i just want to backup my files and install it all over again.I want to access my old files from the ubuntu Live CD, because no kernel is working.Is there a way?. Just in case, i don't have partitions, so i don't have a 'home' one (but i'm going to
I'm install it onto my laptop (its about 4 years old - a Sony Vaio VGN FS315E).
I have been given a live disk of the latest edition of ubuntu (10.4?) by someone at work, but my CD drive on my laptop seems to think the disk is blank. I know this is not the case as when the disk is inserted into a different laptop is it recognised as an ubuntu installation disk.
My aim to boot ubuntu from the disk to get a feel for what it's like before installing it fully on my laptop, and also to check that it would work on said laptop.
my Fedora 11 system is not starting anylonger. It stops with the message:
Code:
VFS: Can't find ext4 filesystem on dev dm-0
The system told me since a while, that a lot of the sectors of one disk of the (software) RAID compound are failed already. So tried to disconnect each of the disks and start them separately. Unfortunaltly this is not working (for one its is not working at all, the other wents the same far as with both), when I tried to recover the system with the Fedora DVD, it said no distribution found. I am quite new and do not know so much about linux system, so i do not know what further information you could need. Maybe it can be important, that both disks are encryped (the system wents so far, that I can type in the password).
There is a disk 500 gb, it is broken on /boot and on /root and on /dev/sda1 and /dev/sda2. Whether prompt it is possible to redistribute a disk without loss of data namely it is necessary to make/boot and two equivalent on disk volume.
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
I'm having some problems booting ubuntu 9.10 and I just want to backup my files and install it all over again. I want to access my old files from the ubuntu Live CD, because no kernel is working. Is there a way?. Just in case, I don't have partitions, so I don't have a 'home' one (but I'm going to).
Keyboard and mouse failure when trying to run a live Ubuntu disk on an Acer Aspire M1641 desktop. I was trying to show off the Ubuntu system to a colleague when to my surprise as it booted up both keyboard and mouse died. There was no response at all, the only option was to use the power button, rebooting into Vista all back to normal. I tried several other versions of Ubuntu going back 8.04 even Knoppix failed to get the keyboard and mouse working. Even after re installing the windows drivers and several more attempts even changing keyboard and mouse, I could not get any linux live disk to work.
My live disk cannot get an internet connection. I am using a self-burned Meerkat live CD, and it will not enable networking. Is there some kind of code fu to get this going? I have tried right clicking and selecting "Enable Networking," but it won't take. It still insists the networking is disabled. The reason I need the connection is because I have to install. I have a Netgear wireless router with a network, and a wired LAN to connect to.
I booted my laptop from the FC 13 Live CD.I'd like to mount the local disk while booted from the Live CD.In older versions of Linux, this used to be as simple as "mount /dev/sda2 /mnt/whatever".But, no longer Progress. When I do "fdisk -l /dev/sda", while booted from the FC13 Live CD, the /dev/sda2 partition shows up as "Linux LVM". My question: how can I mount the partition containing home directories from the "Linux LVM" partition?
Update: I've been looking into third party tools and Slackware live Distributions, example, "Slax"; still, I have yet to have complete success.
I have discovered that by using syslinux I can make the USB Hard-drive Bootable -- I learned this by playing around with Gentoo, however, I like Slackware. I was wondering if any-one could point me toward the direction of how to install Slackware and then utilize syslinux to make it bootable?
I am having trouble both installing or even just booting the live CD. I have to interrupt the boot to give the nomodeset boot option.
Once I get the Ubuntu splash with the oscillating red and white dots for several moments, I get the Busybox with the error message "Unable to find a medium containing a live file system"
If I do a dmesg I then see a lot of sr0 errors. I have an onboard SCSI controller but no scsi devices. I am not sure if this matters.
My ubuntu desktop died yesterday. I rebooted my computer in like 1 month and after grub, the screen is all black and it stays there... forever. So I decided to see if the problem persists or not when I completely upgrade my ubuntu to the latest version. So I downloaded the latest ubuntu iso from the site, burned it, and booted from CD and I see several selections to choose from the menu list. The second one was "Install Ubuntu". What I'm worried about is I don't know whether selecting 'Install Ubuntu' will erase all my previous data, or there will be an option to upgrade Ubuntu without erasing all the data. Is it safe to install from the live disk? Will my data be safe? Is there any way to upgrade my Ubuntu on the HD to the latest Ubuntu from a live disk?
