I am getting ready to upgrade from Ubuntu 8.10 to 9,04 (I am a bit behind, I know). I just drag my home folder to a USB drive to back up and it should copy all the files (including hidden ones).
When I tried this, I get the error that Symbolic links cannot be created. Should I worry about this? Would this effect my backup in some fashion?
im thinking of copying my /home directory by just click & dragging it to my external usb hard drive. then do a fresh reinstall. then just replace the new /home directory with the one on my hard drive(old home directory) will it have my original programs i used to have and all my settings & stuff?
View 10 Replies View Relatedwhen I am trying to copy any of my files to usb stick, it gives me this alert: the folder cannot be copied because you do not have permissions to create it in the destination.
View 2 Replies View Relatedi have this .mkv file of a movie which is of size 7.9GB and when i try to copy it to my external drive after some time it shows a error saying "Error splicing file: file too long" so how to copy help
my external HD's file format is vfat. and i am using ubuntu 10.04
I've got two external drives that are using ext4 that for whatever reason, I just can't seem to write too. I've changed the permissions on the drives using chmod so the permissions are "drwxrwxrwx". I can even right click within the drive and click "Create New Folder" but then it tells me, "Error while copying to "sdc1". The destination is read-only." I thought the destination permissions were setup so anyone can read/write to the disk? I haven't been using linux that long and have only recently started to feel comfortable to move over all of my stuff to Fedora.
View 6 Replies View RelatedMethod of automatic backup from my hard drive to a usb drive when plugged in.
Basically I'll be constantly putting files in /home/downloads and I want it so when I plug in a NTFS usb drive it will automatically Cut(not copy) all the contents of that folder including other folders to my usb drive. Is there any well known programs that can do this?
I would prefer something that is in the repositories that is easily configurable via command line rather than some complicated script.
Ubuntu 10.04 (64)I have a second drive (currently mounted as /disk2).I want my home directory (/home/jb) to include this second disk as JUST a separate 'folder' accessible from my home area.want the data on the second disk to be encrypted, (just like my /home/jb folder is now).I would prefer to 'blend' the second drive into my existing setup.I'm looking for the safest way to achieve this, don't mind editing fstab etc. or getting my hands dirty on the cli.
View 2 Replies View RelatedAs I regularly move between Mac and PC, I thought it would be a good idea to put all my data on an external drive. As Windows 7 and OS X have similar home folder layouts, I just simply put all the folders I need for both on the root of the external drive and changed a few settings so that the Home folder for my user is on the external drive on both Windows and OS X.
Whilst Ubuntu also has a similar structure, I cannot work out how to have it so that my users home folder is on the external drive. I have done a little research and all I can find is how to have the /home directory on another partition. a) this is not what I'm trying to do, just the folder for my user and b) this would mean formatting the external drive to extX format, which just wouldn't work for me.
I am using 9.10 (or will be once the upgrade is complete)
So I messed up a little and didn't leave enough room on my disk. I want to shrink my home directory and move it to the end of the drive. Is this possible? It's ext4 but no an LVM partition though.
View 1 Replies View RelatedHow do you copy everything in the home directory to an external drive while running in rescue mode?
View 3 Replies View RelatedI have an interdependent collection of scripts in my ~/bin directory as well as a developed ~/.vim directory and some other libraries and such in other subdirectories. I've been versioning all of this using git, and have realized that it would be potentially very easy and useful to do development and testing of new and existing scripts, vim plugins, etc. using a cloned repo, and then pull the working code into my actual home directory with a merge.
The easiest way to do this would seem to be to just change & export $HOME, eg
cd ~/testing; git clone ~ home
export HOME=~/testing/home
cd ~
screen -S testing-home
# start vim, write/revise plugins, edit scripts, etc.
# test revisions
However since I've never tried this before I'm concerned that some programs, environment variables, etc., may end up using my actual home directory instead of the exported one. Is this a viable strategy? Are there just a few outliers that I should be careful about?
I have just installed Ubuntu desktop and I am using this pc as a file server. I have already installed Samba and have it operational and viewable by my windows computers. Now the problem is that I have 2 hard drives and the way that I have Samba set up it is sharing my home directory which is wonderful but my windows computers do not have access to the second hard drive. I search for several hours this morning trying to figure out how to do this but cannot figure it out.
View 7 Replies View RelatedI have a dual boot windows XP/OpenSuse 11.3 system running from a hard drive. They are both 32 bit in spite of the fact that the system can run 64 bit.
I would like to upgrade to Windows 7 64 bit (the wife insists, not yet a Linux possibility) and OpenSuse 11.4 64 bit, but having the programme files on an SSD for faster loading, with my data files on the existing hard drive.
I'm happy with the notion of getting the SSD going as a dual boot system. With Windows, as I understand it, it can tell it fairly easily where to look for the "my documents" folder on the hard drive.
However, the Home directory in Linux is not quite the same. How (if it's possible) could I run the SSD but use my existing Home directory on the hard drive?
I m having a RHEL-5 sever.ABC directory size is 57GB after taking backup in the same disk with name ABC.bkp showing 56GB. i used below command to copy/backup. # cp -r ABC ABC.bkp (different sizes after copying)..I checked both the directory sizes by #du -sh <ABC> and du -ks <ABC.bkp>In both GB and KB there is lots of difference (200mb). why this will happen in copying? what is the solution for above question? what is the correct way of copying 1dir to newdir exactly?
View 4 Replies View RelatedUsing SUSE 11, I'm trying to change my existing login user id HOME directory to use encryption. I use YAST to do this, just by clicking the ENCRYPTION box inside the USER AND GROUP MANAGER tool.I receive this error message -- "Not enough disk space left to copy existing data".Which file system do I need to add space to?Here are the filesystem existing sizes --
Filesystem: / Size: 6g Used: 3g
Filesystem: /home Size: 1.8g Used: 65m
I'm trying to build a cups server (with cups-pdf) and it's not printing (creating) the PDF output. from cups-pdf log:
Code:
[ERROR] failed to create directory (/home/testuser/PDF)
[ERROR] failed to create user output directory (/home/testuser/PDF)
the lp command is being ran from SSH as "testuser", who is in the lpadmin group (as well as sysadmin, users, and about 5 other groups while troubleshooting this) I've tried creating the PDF folder as both the user, and as root but still no output file (when the folder is created the first error goes away, but the user output error remains) *note, the /home directory is a symbolic link to a separate partion (/storage) I'm still a bit green on linux, but the server is headless, and for now i'm just trying to get normal users able to print using cups-pdf
here's my cupsd.conf
Code:
#
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
[code]....
I've been running my Dell Mini 9 with the latest alpha for 10.04 since January, but over the weekend I botched things pretty badly and decided to go back to 9.10.I saved my home directory to another machine, and proceeded to install from a 9.10 USB disk. Things didn't go terribly well (I kept seeing "devkit-disks-daemon" crashing) but the install did complete. I shutdown the netbook, yanked the USB drive and powered it back on only to be greeted the grub menu. Choosing any option yields: Code:error: out of memoryPress any key to continue...I did a little searching in places like:HTML there is no mention of that problem there, and running though the command line instructions has the same results. (the linux command seems to be the problem)I've tried re-installed grub from the directions on the page but it is failing with:
Code:
cp: cannot stat '/mnt/boot/grub/ufs1.mod': Input/output error
When I look up that file I see:
[code]...
I tried to use cp -r from root to copy the contents of /home to a different partition, but nothing got moved.
Here is my situation: I am maintaining a "public" (family) computer. On this computer I have a separate partition called "Family" that is a samba share for everyone on the network. Also on this computer I have the default /home directory.
Ideally, all files should be saved on the "family" share. The problem is that the home directory is called "family" (because the user is "family") and the share is also "family." That's a little too confusing for everyone.
So I'd like to copy everything to the share, and set that as the new home directory, so that all files by default are saved on the share, and can be accessed by everyone on our network.
What happened is that I first tried to set up the share as the home directory by following an ibm tutorial [URL]. Just after pressing enter on "cp -ax", I realized that the -ax might mean I was going to lose all the files in the current destination. The file transfer process took forever (keeping me biting my nails to see if I had really lost everything in the drive), but in the end the screen went blank, and the HD light stopped blinking, so I restarted, and everything was there. Completely unchanged, and not copied, either.
So I went back and copied it with cp -r. Same thing. Took a few minutes, but when all was said and done, nothing was changed.
I have a dual-boot macbook with an OS X partition and an ubuntu partition. When I first installed ubuntu, I changed my home folder to my OS X home directory to synchronize all my files from both. My home directory is now /media/sda2/Users/username/. In a regular home folder, the icons for Documents, Music, Pictures, Movies, etc. are different (not just with emblems, but actually different icons). But when I changed my home folder, these subfolders' icons stayed the same as regular folder icons and I can't figure out a way to change that default setting. I know how to change the icons for each folder manually, but these changes don't appear everywhere (i.e. nautilus, places, etc). Furthermore, every time I change my icon theme, I would have to manually reassign icons for these folders. Is there a way to globally change the folder icons for these folders?
View 2 Replies View RelatedHow would i go about copying files to a directory, yet skip the files that already exist in the directory, and also remove the files that are in the directory. For example:
Code:
$ls /dir1
img001.jpg
img002.jpg
[code]....
Now i would like to copy from dir1 to dir2, but the contents of dir2 would be:
Code:
$ls /dir2
img003.jpg
I did it on a friend's desktop and it worked a treat. All her settings, passwords etc... remained.
Is there any catch to doing this or is it that easy?
I have an external USB hard drive (sdb1) mounted at /media/Iomega HDD. When I try to do a chmod to a directory on this drive, chmod doesn't give me an error, but it doesn't change the privs - even when I'm root. Why is this?
Code:
root@d-desktop:/media/Iomega HDD# ls -lart
total 2176732
drwx------ 1 dan dan 456 2010-08-01 16:24 Unison
root@d-desktop:/media/Iomega HDD# chmod -v a+rwx Unison
mode of 'Unison' changed to 0777 (rwxrwxrwx)
root@d-desktop:/media/Iomega HDD# ls -larth
total 2.1G
drwx------ 1 dan dan 456 2010-08-01 16:24 Unison
root@d-desktop:/media/Iomega HDD# /usr/lib/klibc/bin/fstype /dev/sdb1
FSTYPE=unknown
FSSIZE=0
root@d-desktop:/media/Iomega HDD
I need to specify a different path to home directories on a particular server than what LDAP contains for the users, besides using a symlink. E.g. "/Users/jdoe" vs "/home/jdoe" I don't want to change the actual LDAP attributes, just want a particular server to point them in the right direction (Ubuntu 10.04).
I'm assuming it's something I could probably set in pam configurations?
I have a strange problem when I do SSH to a FEDORA9 based Linux Server.
[Code]....
When I login using "adah" username in TELNET I am automatically directed to my home directory at location "/media/disk-1/home/adah". But when I use SSH to login using the same username I get the following message Code: Could not chdir to home directory /home/adahaj: Permission denied
I have a secondary disk which holds a /home directory structure from a previous install of Linux. I installed a new version on a new primary drive and mounted this secondary drive as the new /home. Problem is, even though the users are the same names and I can access the home directories for the users, I cannot login directly to their home directories, as I get the following error: -
Code:
login as: [me]
[me]@[machine]'s password:
Last login: Wed Jan 6 18:34:33 2010 from [machine]
Could not chdir to home directory /home/[me]: Permission denied
[[me]@[machine] /]$
Now, since the usernames are correct and the users are in the passwd file with the correct home directory paths, could it be user ID's that are different or something else? It's not as though I cannot access the home directories for the users, simply that I cannot log directly into them from a login prompt.
Is there anything special about a home directory before users' home directories are stored there, or is just as typical as any other "empty" folder?Let me just cut to the chase, but please no ear ringing about the folly of messing around as root, particularly with directories at root level. I know it's considered stupidity, but I deleted my home directory.
Is there an easy way to restore a working home directory? I tried copying /etc/skel under root, but I'm not sure what a home directory should look like once it has been restored. Besides . & .., there were .screenrc & .xsession in my home directory when I copied /etc/skel. Are these files suppose to be in "/home" or "/home/~" or both?
I have Ubuntu Karmic. I chose to install with an encrypted home directory. Recently I got a warning that I only had 2GB of drive space left. This is mostly because of my videos. So I went and bought a new hard drive and partitioned it and made 1 ext4 partition and copied my videos all to the new hard drive. I added a line in my fstab to mount the new hard drive to ~/videos, but when I reboot the computer, there is a screen saying something like "error mounting /home/me/videos, press S to skip or something else to reboot". If I press S to skip, then when my system comes up there is a video directory but it's empty because my other hard drive didn't get mounted. I can run sudo mount /dev/sdb video/ and it will mount fine and I can see all my videos, so why can't fstab mount it? Does this have something to do with my encrypted home directory?
View 14 Replies View RelatedI'm having trouble copying a directory from one place to another in my build.xml file. I need to copy an image directory from the base directory (or root directory) to the dist directory so that it can be included in the jar file when I'm done compiling my java files.
This is my base directory:
drwx------ 1 enrique enrique 4096 2010-09-13 21:19 build/
-rwxrwxrwx 1 enrique enrique 1861 2010-09-13 22:17 build.xml*
drwx------ 1 enrique enrique 264 2010-09-13 21:19 dist/
drwx------ 1 enrique enrique 8192 2010-09-11 19:30 img/
drwx------ 1 enrique enrique 4096 2010-09-13 21:18 src/
The build/ and dist/ directories are created when I compile my java files from the src/ directory and img/ is where i have all my .png files which are needed for the program to display correctly.
Now for my Ant file: build.xml:
<?xml version="1.0"?>
<project name="PokerFiles4" default="compile" basedir=".">
<!-- Setting properties -->
<property name="dir.src" value="src"/>
[code]....
how I can get my img/ directory in the jar file would be appreciated, I'm writing a poker application to generate statistics for poker hands post-flop, and on the turn, like pot odds, hand odds, poker odds, outs, etc, I got the gui working, all I have to do is get the buttons in the app working, but all my classes are written and are working fine.
iam trying to send sms using gnokii utility in linux firstly i did sudo apt-get install gnokii after that i got a gnokiirc.gz file in /usr/share/doc/gnokii/sample/gnokiirc.gz file here after that i did gunzip gnokiirc.gz then i transferred my file from the /usr/share/doc/gnokii/sample to home directory by using copy command as copying files to home is not allowed so i used sudo sudo cp gnokii /home after that i changed the port=/dev/ttyUSB2 and model=AT in the gnokiirc file in the home directory and then i wrote gnokii --identify
[Code]....
i followed as in the [URL] and [URL] and except this "Note that you will need read/write permissions on whatever serial port you specify in .gnokiirc."(iam confused what is my serial port is it ttyUSB2)
How do I copy and/or move files to the base folder of a user? I don't know what is is called, so I do not know what to put in the my file "?" command? I know you would normally put mv filename /directoryname, but what is the base username called?
View 1 Replies View Related