I am starting to learn about the nuts and bolts of Linux and I wanted to have an option in my Grub boot loader to boot up without x window or any services just a log in so I can test changing config files and experience a system that isn't bogged down by all the things that come along with them.
View 2 Replies
After making and update my Karmic Koala and trying to set up lamp through tasksell, i have rebooted my notebook. Then the ubuntu logo was displayied and i get an"Ubuntu is eunnung in low graphics mode"(EE) open /dev/fe0: No such file or dierctory.i have done some googling and figured that it has most likely to do with ubuntu tryin to using frame buffer wrongly.
View 1 Replies View Relatedmy Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View Relatedusing tomcat6 server os is fedora9 i need to run test.jsp file every 20 minits i assigned the cron job */20 * * * * wget http://<my host>/containfolder/recurring.jsp but, its take long time so i need to run test.jsp file in linux command prompt, Is it possible to run JSP in linux command prompt?. If there is yes mean, plz tell how we can do that.
View 3 Replies View RelatedI was trying to install the nvidia drivers and used telinit3 on the comand line to stop the XServer but now I'm stuck in the command line. How do I get back to the graphical part?
I tried using telinit 5 but its just starting anacron and doesnt seem 2 do much
I installed 11.04 after Windows 7. when the GRUB boot menu starts up there is an option for Win 7 boot but it will not boot windows. When that option is selected the screen changes colour for 2 seconds and then reverts to the GRUB menu. Ubuntu boots fine.I downloaded the Boot Info Script and ran it, the results are
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================[code].....
Yesterday i have installed F14 and then went to the comand line to update the system via yum update. It was about 860MB of updates in 430 packages. The strange thing is that only one package was a delta rpm and all other were normal rpm. Is Fedora giving up on presto or it needs some special configuration?
View 1 Replies View RelatedI recently installed Ubuntu 10.10 on my desktop which also have windows xp installed. After the installation I could boot to both Ubuntu and Windows. I then installed some updates from the update manager in Ubuntu 10.10 and after this the windows option in the grub boot menu is gone. The boot_info_script055.sh returned the following result
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for (,msdos5)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb
[code]....
I just got to finish installing ubuntu lastest version on my new netbook, im really exited about how powerful it can get. The thing is, I'm still keeping my old Windows 7 partition and data, and I want to access it faster, editing the grub options, to change the timer on it, and the default booting option.
View 6 Replies View RelatedI installed Maverick alongside Windows 7. Then I upgraded Maverick to Natty, removed and reinstalled the latest kernel and ubuntu-desktop using Synaptic Package Manager. But now GRUB does NOT show any option to boot into Ubuntu Natty.
View 9 Replies View RelatedAfter giving it my best shot, I had to give up and finally decide that I need "acpi=off" added to the kernel line in grub. I have done so, saved it:
kernel /boot/vmlinuz-2.6.31.12-0.2-default root=/dev/disk/by-id/ata-ST950212A_5LE02797-part1
pci=noacpi
I have tried "acpi=off" "pci=noacpi". But on boot the system totally ignores this and loads the acpi support from the kernal, which shut down the USB ports. Where is this option used in Suse so that the kernel will recognize on each boot?
I have an arbiter which determines and manages a lab. I am wondering if it's possible to remotely control the grub boot selection. Right now I have to wait for the nodes to boot, check the hostname and then rsync the new grub configuration and reboot the node, it's VERY timely so I am wondering if there is an alternative to this method?
View 2 Replies View RelatedOut of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies View RelatedI installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
Dual-Boot: Mac OSX and Ubuntu
Want to dual boot 10.04LTS and OS X 10.6.5
But there is no option to install the boot loader (grub) to /dev/sda3 as per the following
using Bootcamp
https://help.ubuntu.com/community/Ma...elInstallation
After installation of windows 7 installed debian 8.3. But in grub menu no boot option showing to windows.There ar only two option 1.)to boot in debian and 2.)advanc option for debian ONLY!!
View 1 Replies View RelatedWhenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
View 3 Replies View RelatedI had a working dual boot Ubuntu 10 and Windows 7. Anyways long story short, I got it working again but have lost the boot option for windows 7. If i run fdisk -l, I get the following.
root@support-Latitude-E6400:/home/support# fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
[code]....
I installed gparted and can see that windows 7 is installed in dev/sda6. In another forum, i read that someone had to edit their menu.lst so i did with the following.
title=Windows 7
rootnoverify (hd0,6)
makeactive
chainloader +1
When i try to boot from windows 7, i get the following error. Error 12: invalid device request. How can i get my laptop to boot from windows again?
i have successfuly installed ubuntu karmic inside my windows 7. After an update, i restarted it. but it didnt boot ubuntu. instead it shows grub's command line. what should i do? all of my java projects/programs is in there.
View 2 Replies View RelatedI recently updated, and now when I boot it only goes as far as grub command line. There is no grub menu. The computer is a Dell Inspiron 8600 laptop with only Ubuntu installed -- no dual boot, no weird partition schemes. Originally installed Ubuntu 09.04 on this computer, upgraded a couple times and it currently has (had) 10.04.1 LTS running. The update should have upgraded from kernel 2.6.32-23 to 2.6.32-24. I can boot with a live CD and mount the hard drive. The drive seems fine, so it appears to be simply a grub config issue. I have to boot with live cd to get online to check for potential solutions. So I'm taking some notes on how to use grub.
View 4 Replies View RelatedWhen I turned on my laptop today, instead of showing me the boot menu..it show grub command line..ie
Code:
grub>_
I have no knowledge about grub command line..still i tried to boot into my fc14 ..using these steps given here
[Code]...
Thus boot configuration files have been lost..i think I have to install Fedora again
Running Ubuntu 10.10. My desktop environment is screwed up and won't let me use the keyboard or mouse at the login screen. How can force a command prompt during boot?
Here's a method:
Alt-SysRq-e - Requests kernel kill all processes except init.
It used to be with (old) grub you could hit a function key and add a runlevel option to boot a console, but I don't know how to do this here, wanting not to edit the grub config file, as seems the only apparent option: I'm trying to boot into SimplyMepis where there is no rescue menu option, so need the prompt?
View 4 Replies View RelatedAfter my last update in my ubuntu, I had a problem. (As almost everytime that I update it)
When I select to boot ubuntu, it doesn't work.It shows something like:"GNU GRUB version 1.97"beta 4[ Minimal BASH-like line editing is supported.For the first word, TAB lists possible command completions.Anywhere else TAB lists possible device/file completions]
sh:grub> "And I don't know how to make it work.I tried to follow this tutorial:[URL]I got an error message saying that the file couldn't be found. And if I skip it, when I type "boot" the system reboots and comes to the same place I was before.
I've also tried to set another partitions like
My Wubi installation of Ubuntu (version 9.10, I think) that I recently installed was working fine at one point, but now it isn['t. I select Ubuntu instead of Windows from the Windows boot loader, but instead of getting the usual menu of different linux versions (I think 2, as I updated it at same point), and Windows, I get the GRUB command prompt instead.I've looked at th2e Wubi Guide (https://wiki.ubuntu.com/WubiGuide), and I've followed the instructions for "How can I access my Wubi install and repair my install if it won't boot?", but that reveals no problems.For the record, I'm fairly new to linux and ubuntu, but I'm good with computers generally. The main operating system on my computer is Windows Vista, but I'm currently typing this from a Live CD of Ubuntu 9.10. The virtual disk (root.disk), is currently mounted as vdisk, as indicated in the Wubi Guide.
Ideally I would like to get Ubuntu to load as it used to (with a menu). However, if there is a way to boot from the GRUB command line that would be good too. I'm not at all familiar with GRUB, and the commands I've tried (boot and linux, I think), get errors saying no kernel specified, or loaded, or something like that.
I've recently had trouble reinstalling my Ubuntu system as I was getting various unusual errors as described in my old thread here. I thought it was probably something to do with my RAID-0 array which was pre-installed on my laptop from purchase being corrupted or something like that (if it's possible). I decided to simplify things for myself (not understanding RAID arrays much) so I just removed the RAID array and installed Windows and Ubuntu on the now separate hard disks. It worked fine.
I noticed quite a significant performance drop, however, with even Ubuntu boots taking longer than 30 seconds despite my laptop being both high-spec and only a few months old. Windows, as you can imagine, was dreadfully slow. I wasn't entirely convinced that this was entirely due to the loss of the RAID array - as even low-spec laptops with presumably no RAID arrays are supposed to boot Ubuntu in under 30 seconds apparently - but I read that RAID-0 arra
I'd like to say I'm very impressed with Fedora 11. I'm a long time Linux user and I've tried many distros. But, I usually keep only the best on my laptop. For a long time that was Ubuntu but, I think Fedora 11 has made some key improvements over Ubuntu and I'm eager to switch. The problem is: I haven't been able to run Fedora as anything other than on the Live CD. Everything works perfectly and it installs but, when I reboot, Grub begins. Instead of booting, however, Grub drops into its minimal shell and gives me a command line.
I've tried installing it a number of ways now and have read much about the problems with Ext4 on Grub and took special care to see that Grub has its own, separate, /boot ext3 partition. Even then, no luck. My hardware should work fine. I've got an HP DV-5 with 4GB RAM, AMD Turion 64-bit dual-core @ 2 Ghz, and an IDE 250GB hard drive. I'm working with the 64-bit Fedora 11 Live disc with KDE as the Gui.
I don't have a "CPU MHz" line in my /proc/cpuinfo. I wonder if this is because I installed a 32-bit Ubuntu (10.10, Maverick) on 64-bit (dual core) AMD hardware. Various apps depend on the "CPU MHz" value and simply refuse to run without it. Is it, indeed, a 32-bit software on 64-bit hardware thing? If so, is there any fix short of replacing (clean-installing) the whole system in 64-bit?
$ uname -a:
..... 2.6.32-27-generic #49-Ubuntu SMP Wed Dec 1 23:52:12 UTC 2010 i686 GNU/Linux
$ cat /proc/cpuinfo:
processor: 0
vendor_id: AuthenticAMD
cpu family: 15
model: 104
model name: AMD Turion(tm) 64 X2 Mobile Technology TL-58
stepping: 1
cache size: 512 KB
physical id: 0 .....
Does anyone know how? I want to add the command line option to the login to. So, I have Gnome, KDE and command line.
View 9 Replies View RelatedCan I use the grub command line to reinstall grub from a ubuntu cd?
View 1 Replies View Related
